diff options
Diffstat (limited to 'arch/arm64/boot/dts/renesas/ulcb-kf.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 208 |
1 files changed, 101 insertions, 107 deletions
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi index 408871c2859d..2a157d1efb3d 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi @@ -4,18 +4,29 @@ * * Copyright (C) 2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. + * + * Sample Audio settings: + * + * > amixer set "DVC Out" 1% + * > amixer set "DVC In" 20% + * + * // if you use xxxx-mix+split.dtsi + * > amixer -D hw:1 set "pcm3168a DAC1" 50% + * > amixer -D hw:1 set "pcm3168a DAC2" 50% + * > amixer -D hw:1 set "pcm3168a DAC3" 50% + * > amixer -D hw:1 set "pcm3168a DAC4" 50% + * + * // else + * > amixer -D hw:1 set "DAC1" 50% + * > amixer -D hw:1 set "DAC2" 50% + * > amixer -D hw:1 set "DAC3" 50% + * > amixer -D hw:1 set "DAC4" 50% */ - -/* - * SSI-PCM3168A - * aplay -D plughw:0,2 xxx.wav - * arecord -D plughw:0,3 xxx.wav - */ - / { aliases { serial1 = &hscif0; serial2 = &scif1; + serial3 = &hscif1; mmc2 = &sdhi3; }; @@ -37,39 +48,40 @@ }; }; - accel_3v3: regulator-acc-3v3 { + reg_t1p8v: regulator-t1p8v { compatible = "regulator-fixed"; - regulator-name = "accel-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - hdmi_1v8: regulator-hdmi-1v8 { - compatible = "regulator-fixed"; - regulator-name = "hdmi-1v8"; + regulator-name = "T1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; }; - hdmi_3v3: regulator-hdmi-3v3 { + pcie_1v5: regulator-pcie-1v5 { compatible = "regulator-fixed"; - regulator-name = "hdmi-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-name = "pcie-1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&gpio_exp_77 15 GPIO_ACTIVE_HIGH>; + enable-active-high; }; - snd_3p3v: regulator-snd_3p3v { + pcie_3v3: regulator-pcie-3v3 { compatible = "regulator-fixed"; - regulator-name = "snd-3.3v"; + regulator-name = "pcie-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + gpio = <&gpio_exp_77 14 GPIO_ACTIVE_HIGH>; + enable-active-high; }; - snd_vcc5v: regulator-snd_vcc5v { + reg_5v: regulator-5v { compatible = "regulator-fixed"; - regulator-name = "snd-vcc5v"; + regulator-name = "fixed-5V"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; }; wlan_en: regulator-wlan_en { @@ -120,13 +132,21 @@ status = "okay"; }; +&hscif1 { + pinctrl-0 = <&hscif1_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + status = "okay"; +}; + &hsusb { dr_mode = "otg"; status = "okay"; }; &i2c2 { - i2cswitch2: i2c-switch@71 { + i2cmux2: i2c-mux@71 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; @@ -146,19 +166,18 @@ pinctrl-0 = <&hdmi1_pins>; pinctrl-names = "default"; - interrupt-parent = <&gpio2>; - interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio2 14 IRQ_TYPE_LEVEL_LOW>; clocks = <&cs2000>; clock-names = "cec"; pd-gpios = <&gpio_exp_75 5 GPIO_ACTIVE_LOW>; - avdd-supply = <&hdmi_1v8>; - dvdd-supply = <&hdmi_1v8>; - pvdd-supply = <&hdmi_1v8>; - dvdd-3v-supply = <&hdmi_3v3>; - bgvdd-supply = <&hdmi_1v8>; + avdd-supply = <®_t1p8v>; + dvdd-supply = <®_t1p8v>; + pvdd-supply = <®_t1p8v>; + dvdd-3v-supply = <®_3p3v>; + bgvdd-supply = <®_t1p8v>; adi,input-depth = <8>; adi,input-colorspace = "rgb"; @@ -195,8 +214,8 @@ compatible = "st,lsm9ds0-imu"; reg = <0x1d>; - vdd-supply = <&accel_3v3>; - vddio-supply = <&accel_3v3>; + vdd-supply = <®_3p3v>; + vddio-supply = <®_3p3v>; }; pcm3168a: audio-codec@44 { @@ -206,40 +225,20 @@ clocks = <&clksndsel>; clock-names = "scki"; - VDD1-supply = <&snd_3p3v>; - VDD2-supply = <&snd_3p3v>; - VCCAD1-supply = <&snd_vcc5v>; - VCCAD2-supply = <&snd_vcc5v>; - VCCDA1-supply = <&snd_vcc5v>; - VCCDA2-supply = <&snd_vcc5v>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - mclk-fs = <512>; - port@0 { - reg = <0>; - pcm3168a_endpoint_p: endpoint { - remote-endpoint = <&rsnd_for_pcm3168a_play>; - clocks = <&clksndsel>; - }; - }; - port@1 { - reg = <1>; - pcm3168a_endpoint_c: endpoint { - remote-endpoint = <&rsnd_for_pcm3168a_capture>; - clocks = <&clksndsel>; - }; - }; - }; + VDD1-supply = <®_3p3v>; + VDD2-supply = <®_3p3v>; + VCCAD1-supply = <®_5v>; + VCCAD2-supply = <®_5v>; + VCCDA1-supply = <®_5v>; + VCCDA2-supply = <®_5v>; }; gyroscope@6b { compatible = "st,lsm9ds0-gyro"; reg = <0x6b>; - vdd-supply = <&accel_3v3>; - vddio-supply = <&accel_3v3>; + vdd-supply = <®_3p3v>; + vddio-supply = <®_3p3v>; }; }; }; @@ -251,8 +250,8 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - interrupt-parent = <&gpio6>; - interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + #interrupt-cells = <2>; + interrupts-extended = <&gpio6 8 IRQ_TYPE_EDGE_FALLING>; audio-out-off-hog { gpio-hog; @@ -311,13 +310,13 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - interrupt-parent = <&gpio6>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + #interrupt-cells = <2>; + interrupts-extended = <&gpio6 4 IRQ_TYPE_EDGE_FALLING>; }; }; &i2c4 { - i2cswitch4: i2c-switch@71 { + i2cmux4: i2c-mux@71 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; @@ -331,8 +330,8 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - interrupt-parent = <&gpio7>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + #interrupt-cells = <2>; + interrupts-extended = <&gpio7 3 IRQ_TYPE_EDGE_FALLING>; }; gpio_exp_77: gpio@77 { @@ -341,8 +340,8 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - interrupt-parent = <&gpio5>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + #interrupt-cells = <2>; + interrupts-extended = <&gpio5 9 IRQ_TYPE_EDGE_FALLING>; }; }; @@ -361,6 +360,9 @@ &pciec1 { status = "okay"; + + vpcie1v5-supply = <&pcie_1v5>; + vpcie3v3-supply = <&pcie_3v3>; }; &pfc { @@ -392,8 +394,13 @@ function = "hscif0"; }; + hscif1_pins: hscif1 { + groups = "hscif1_data_a", "hscif1_ctrl_a"; + function = "hscif1"; + }; + scif1_pins: scif1 { - groups = "scif1_data_b", "scif1_ctrl"; + groups = "scif1_data_b"; function = "scif1"; }; @@ -418,38 +425,20 @@ pinctrl-0 = <&sound_pins &sound_clk_pins &sound_pcm_pins>; - - ports { - /* rsnd_port0/1 are defined in ulcb.dtsi */ - rsnd_port2: port@2 { - reg = <2>; - rsnd_for_pcm3168a_play: endpoint { - remote-endpoint = <&pcm3168a_endpoint_p>; - bitclock-master; - frame-master; - dai-tdm-slot-num = <8>; - playback = <&ssi3>; - }; - }; - rsnd_port3: port@3 { - reg = <3>; - rsnd_for_pcm3168a_capture: endpoint { - remote-endpoint = <&pcm3168a_endpoint_c>; - bitclock-master; - frame-master; - dai-tdm-slot-num = <6>; - capture = <&ssi4>; - }; - }; - }; }; &scif1 { pinctrl-0 = <&scif1_pins>; pinctrl-names = "default"; - uart-has-rtscts; status = "okay"; + + gnss { + compatible = "u-blox,neo-m8"; + reset-gpios = <&gpio_exp_75 6 GPIO_ACTIVE_LOW>; + vcc-supply = <®_3p3v>; + current-speed = <9600>; + }; }; &sdhi3 { @@ -471,19 +460,10 @@ wlcore: wlcore@2 { compatible = "ti,wl1837"; reg = <2>; - interrupt-parent = <&gpio1>; - interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpio1 25 IRQ_TYPE_EDGE_FALLING>; }; }; -&sound_card { - links = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ - &rsnd_port2 /* pcm3168a playback */ - &rsnd_port3 /* pcm3168a capture */ - >; -}; - &ssi4 { shared-pin; }; @@ -498,3 +478,17 @@ &xhci0 { status = "okay"; }; + +/* + * For sound-test. + * + * We can switch Audio Card for testing + * see also ulcb.dtsi + * + * #include "ulcb-kf-simple-audio-card.dtsi" + * #include "ulcb-kf-simple-audio-card-mix+split.dtsi" + * #include "ulcb-kf-audio-graph-card.dtsi" + * #include "ulcb-kf-audio-graph-card-mix+split.dtsi" + * #include "ulcb-kf-audio-graph-card2-mix+split.dtsi" + */ +#include "ulcb-kf-audio-graph-card2.dtsi" |