diff options
Diffstat (limited to 'arch/arm64/boot/dts/renesas/ulcb.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/renesas/ulcb.dtsi | 159 |
1 files changed, 94 insertions, 65 deletions
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 1f177af3eb9d..a9e53b36f1d9 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -4,14 +4,11 @@ * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2016 Cogent Embedded, Inc. - */ - -/* - * SSI-AK4613 - * aplay -D plughw:0,0 xxx.wav - * arecord -D plughw:0,0 xxx.wav - * SSI-HDMI - * aplay -D plughw:0,1 xxx.wav + * + * Sample Audio settings: + * + * > amixer set "DVC Out" 1% + * > amixer set "DVC In" 20% */ #include <dt-bindings/gpio/gpio.h> @@ -21,6 +18,14 @@ model = "Renesas R-Car Gen3 ULCB board"; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c_dvfs; serial0 = &scif2; ethernet0 = &avb; mmc0 = &sdhi2; @@ -48,6 +53,7 @@ port { hdmi0_con: endpoint { + remote-endpoint = <&rcar_dw_hdmi0_out>; }; }; }; @@ -75,7 +81,7 @@ }; }; - reg_1p8v: regulator0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -84,7 +90,7 @@ regulator-always-on; }; - reg_3p3v: regulator1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -93,15 +99,6 @@ regulator-always-on; }; - sound_card: sound { - compatible = "audio-graph-card"; - label = "rcar-sound"; - - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ - >; - }; - vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; @@ -154,10 +151,11 @@ status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; - interrupt-parent = <&gpio2>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio2 11 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; }; }; @@ -190,17 +188,10 @@ }; port@2 { reg = <2>; - dw_hdmi0_snd_in: endpoint { - remote-endpoint = <&rsnd_for_hdmi>; - }; }; }; }; -&hdmi0_con { - remote-endpoint = <&rcar_dw_hdmi0_out>; -}; - &i2c2 { pinctrl-0 = <&i2c2_pins>; pinctrl-names = "default"; @@ -211,7 +202,6 @@ ak4613: codec@10 { compatible = "asahi-kasei,ak4613"; - #sound-dai-cells = <0>; reg = <0x10>; clocks = <&rcar_sound 3>; @@ -223,12 +213,6 @@ asahi-kasei,out4-single-end; asahi-kasei,out5-single-end; asahi-kasei,out6-single-end; - - port { - ak4613_endpoint: endpoint { - remote-endpoint = <&rsnd_for_ak4613>; - }; - }; }; cs2000: clk-multiplier@4f { @@ -254,10 +238,13 @@ #clock-cells = <1>; clocks = <&x23_clk>; clock-names = "xin"; + idt,shutdown = <0>; + idt,output-enable-active = <1>; }; }; &i2c_dvfs { + bootph-all; status = "okay"; clock-frequency = <400000>; @@ -268,8 +255,7 @@ compatible = "rohm,bd9571mwv"; reg = <0x30>; - interrupt-parent = <&intc_ex>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&intc_ex 0 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; gpio-controller; @@ -287,6 +273,13 @@ }; }; }; + + eeprom@50 { + compatible = "rohm,br24t01", "atmel,24c01"; + reg = <0x50>; + pagesize = <8>; + bootph-all; + }; }; &ohci1 { @@ -374,9 +367,6 @@ pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; pinctrl-names = "default"; - /* Single DAI */ - #sound-dai-cells = <0>; - /* audio_clkout0/1/2/3 */ #clock-cells = <1>; clock-frequency = <12288000 11289600>; @@ -400,34 +390,53 @@ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, <&audio_clk_a>, <&cs2000>, <&audio_clk_c>, - <&cpg CPG_CORE CPG_AUDIO_CLK_I>; + <&cpg CPG_MOD 922>; +}; - ports { - #address-cells = <1>; - #size-cells = <0>; - rsnd_port0: port@0 { - reg = <0>; - rsnd_for_ak4613: endpoint { - remote-endpoint = <&ak4613_endpoint>; - - dai-format = "left_j"; - bitclock-master = <&rsnd_for_ak4613>; - frame-master = <&rsnd_for_ak4613>; - - playback = <&ssi0>, <&src0>, <&dvc0>; - capture = <&ssi1>, <&src1>, <&dvc1>; - }; - }; - rsnd_port1: port@1 { - reg = <1>; - rsnd_for_hdmi: endpoint { - remote-endpoint = <&dw_hdmi0_snd_in>; +&rpc { + /* Left disabled. To be enabled by firmware when unlocked. */ - dai-format = "i2s"; - bitclock-master = <&rsnd_for_hdmi>; - frame-master = <&rsnd_for_hdmi>; + flash@0 { + compatible = "cypress,hyperflash", "cfi-flash"; + reg = <0>; - playback = <&ssi2>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootparam@0 { + reg = <0x00000000 0x040000>; + read-only; + }; + bl2@40000 { + reg = <0x00040000 0x140000>; + read-only; + }; + cert_header_sa6@180000 { + reg = <0x00180000 0x040000>; + read-only; + }; + bl31@1c0000 { + reg = <0x001c0000 0x040000>; + read-only; + }; + tee@200000 { + reg = <0x00200000 0x440000>; + read-only; + }; + uboot@640000 { + reg = <0x00640000 0x100000>; + read-only; + }; + dtb@740000 { + reg = <0x00740000 0x080000>; + }; + kernel@7c0000 { + reg = <0x007c0000 0x1400000>; + }; + user@1bc0000 { + reg = <0x01bc0000 0x2440000>; }; }; }; @@ -441,6 +450,7 @@ &scif2 { pinctrl-0 = <&scif2_pins>; pinctrl-names = "default"; + bootph-all; status = "okay"; }; @@ -485,9 +495,28 @@ shared-pin; }; +/* Firmware should reserve it but sadly doesn't */ +&swdt { + status = "reserved"; +}; + &usb2_phy1 { pinctrl-0 = <&usb1_pins>; pinctrl-names = "default"; status = "okay"; }; + + +/* + * For sound-test. + * + * We can switch Audio Card for testing + * + * #include "ulcb-simple-audio-card.dtsi" + * #include "ulcb-simple-audio-card-mix+split.dtsi" + * #include "ulcb-audio-graph-card.dtsi" + * #include "ulcb-audio-graph-card-mix+split.dtsi" + * #include "ulcb-audio-graph-card2-mix+split.dtsi" + */ +#include "ulcb-audio-graph-card2.dtsi" |