diff options
Diffstat (limited to 'arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts')
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts | 289 |
1 files changed, 250 insertions, 39 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts index e5709c7ee06a..2dca1dca20b8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts @@ -12,8 +12,8 @@ /dts-v1/; #include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/linux-event-codes.h> -#include "rk3399.dtsi" -#include "rk3399-opp.dtsi" +#include <dt-bindings/leds/common.h> +#include "rk3399-s.dtsi" / { model = "Pine64 PinePhone Pro"; @@ -69,14 +69,52 @@ }; }; - vcc_sys: vcc-sys-regulator { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&red_led_pin &green_led_pin &blue_led_pin>; + + led_red: led-0 { + color = <LED_COLOR_ID_RED>; + gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; + }; + + led_green: led-1 { + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>; + }; + + led_blue: led-2 { + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>; + }; + }; + + multi-led { + compatible = "leds-group-multicolor"; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_INDICATOR; + leds = <&led_red>, <&led_green>, <&led_blue>; + }; + + vcc_sys: regulator-vcc-sys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; regulator-always-on; regulator-boot-on; }; - vcc3v3_sys: vcc3v3-sys-regulator { + avdd2v8_dvp: regulator-avdd2v8-dvp { + compatible = "regulator-fixed"; + regulator-name = "avdd2v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc3v3_sys: regulator-vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; regulator-always-on; @@ -86,7 +124,7 @@ vin-supply = <&vcc_sys>; }; - vcca1v8_s3: vcc1v8-s3-regulator { + vcca1v8_s3: regulator-vcc1v8-s3 { compatible = "regulator-fixed"; regulator-name = "vcca1v8_s3"; regulator-min-microvolt = <1800000>; @@ -96,7 +134,7 @@ regulator-boot-on; }; - vcc1v8_codec: vcc1v8-codec-regulator { + vcc1v8_codec: regulator-vcc1v8-codec { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; @@ -108,6 +146,16 @@ vin-supply = <&vcc3v3_sys>; }; + vcc1v2_dvp: regulator-vcc1v2-dvp { + compatible = "regulator-fixed"; + regulator-name = "vcc1v2_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vcca1v8_s3>; + }; + wifi_pwrseq: sdio-wifi-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rk818 1>; @@ -130,7 +178,7 @@ }; /* MIPI DSI panel 1.8v supply */ - vcc1v8_lcd: vcc1v8-lcd { + vcc1v8_lcd: regulator-vcc1v8-lcd { compatible = "regulator-fixed"; enable-active-high; regulator-name = "vcc1v8_lcd"; @@ -138,11 +186,10 @@ regulator-max-microvolt = <1800000>; vin-supply = <&vcc3v3_sys>; gpio = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; }; /* MIPI DSI panel 2.8v supply */ - vcc2v8_lcd: vcc2v8-lcd { + vcc2v8_lcd: regulator-vcc2v8-lcd { compatible = "regulator-fixed"; enable-active-high; regulator-name = "vcc2v8_lcd"; @@ -150,7 +197,12 @@ regulator-max-microvolt = <2800000>; vin-supply = <&vcc3v3_sys>; gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; + }; + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>; + vcc-supply = <&vcc3v3_sys>; }; }; @@ -209,7 +261,7 @@ clock-output-names = "xin32k", "rk808-clkout2"; pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; + system-power-controller; wakeup-source; vcc1-supply = <&vcc_sys>; @@ -280,6 +332,8 @@ vcca1v8_codec: LDO_REG3 { regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; @@ -388,6 +442,67 @@ }; }; +&i2c1 { + assigned-clocks = <&cru SCLK_CIF_OUT>; + assigned-clock-rates = <24000000>; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer &cif_clkouta>; + status = "okay"; + + wcam: camera@1a { + compatible = "sony,imx258"; + reg = <0x1a>; + clocks = <&cru SCLK_CIF_OUT>; /* MIPI_MCLK0, derived from CIF_CLKO */ + lens-focus = <&wcam_lens>; + orientation = <1>; /* V4L2_CAMERA_ORIENTATION_BACK */ + pinctrl-names = "default"; + pinctrl-0 = <&camera_rst_l>; + reset-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_LOW>; + rotation = <270>; + /* Note: both cameras also depend on vcca1v8_codec to power the I2C bus. */ + vif-supply = <&vcc1v8_dvp>; + vana-supply = <&avdd2v8_dvp>; + vdig-supply = <&vcc1v2_dvp>; /* DVDD_DVP is the same as VCC1V2_DVP */ + + port { + wcam_out: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <636000000>; + remote-endpoint = <&mipi_in_wcam>; + }; + }; + }; + + wcam_lens: camera-lens@c { + compatible = "dongwoon,dw9714"; + reg = <0x0c>; + /* Same I2c bus as both cameras, depends on vcca1v8_codec for power. */ + vcc-supply = <&vcc1v8_dvp>; + }; + + ucam: camera@36 { + compatible = "ovti,ov8858"; + reg = <0x36>; + clocks = <&cru SCLK_CIF_OUT>; /* MIPI_MCLK1, derived from CIF_CLK0 */ + clock-names = "xvclk"; + dovdd-supply = <&vcc1v8_dvp>; + orientation = <0>; /* V4L2_CAMERA_ORIENTATION_FRONT */ + pinctrl-names = "default"; + pinctrl-0 = <&camera2_rst_l &dvp_pdn0_h>; + powerdown-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_LOW>; + rotation = <90>; + + port { + ucam_out: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&mipi_in_ucam>; + }; + }; + }; +}; + &i2c3 { i2c-scl-rising-time-ns = <450>; i2c-scl-falling-time-ns = <15>; @@ -407,24 +522,18 @@ }; }; -&cluster0_opp { - opp04 { - status = "disabled"; - }; - - opp05 { - status = "disabled"; - }; -}; - -&cluster1_opp { - opp06 { - opp-hz = /bits/ 64 <1500000000>; - opp-microvolt = <1100000 1100000 1150000>; - }; +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; - opp07 { - status = "disabled"; + /* Accelerometer/gyroscope */ + mpu6500@68 { + compatible = "invensense,mpu6500"; + reg = <0x68>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PC6 IRQ_TYPE_LEVEL_LOW>; + vddio-supply = <&vcc_1v8>; }; }; @@ -436,30 +545,61 @@ status = "okay"; }; -&mipi_dsi { +&isp0 { status = "okay"; - clock-master; ports { - mipi_out: port@1 { - #address-cells = <0>; - #size-cells = <0>; - reg = <1>; + port@0 { + mipi_in_ucam: endpoint@0 { + reg = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&ucam_out>; + }; + }; + }; +}; - mipi_out_panel: endpoint { - remote-endpoint = <&mipi_in_panel>; +&isp0_mmu { + status = "okay"; +}; + +&isp1 { + status = "okay"; + + ports { + port@0 { + mipi_in_wcam: endpoint@0 { + reg = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&wcam_out>; }; }; }; +}; + +&mipi_dphy_rx0 { + status = "okay"; +}; + +&isp1_mmu { + status = "okay"; +}; + +&mipi_dsi { + clock-master; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; panel@0 { - compatible = "hannstar,hsd060bhw4"; + compatible = "hannstar,hsd060bhw4", "himax,hx8394"; reg = <0>; backlight = <&backlight>; - reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>; - vcc-supply = <&vcc2v8_lcd>; iovcc-supply = <&vcc1v8_lcd>; pinctrl-names = "default"; + pinctrl-0 = <&lcd1_rst_pin>; + reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>; + vcc-supply = <&vcc2v8_lcd>; port { mipi_in_panel: endpoint { @@ -469,6 +609,16 @@ }; }; +&mipi_out { + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; +}; + +&mipi_dsi1 { + status = "okay"; +}; + &pmu_io_domains { pmu1830-supply = <&vcc_1v8>; status = "okay"; @@ -481,6 +631,38 @@ }; }; + lcd { + lcd1_rst_pin: lcd1-rst-pin { + rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + cameras { + camera_rst_l: camera-rst-l { + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + camera2_rst_l: camera2-rst-l { + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + dvp_pdn0_h: dvp-pdn0-h { + rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + red_led_pin: red-led-pin { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + green_led_pin: green-led-pin { + rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + blue_led_pin: blue-led-pin { + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; @@ -507,6 +689,12 @@ }; }; + wifi { + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + wireless-bluetooth { bt_wake_pin: bt-wake-pin { rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; @@ -533,7 +721,19 @@ pinctrl-names = "default"; pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; sd-uhs-sdr104; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio4>; + interrupts = <RK_PD0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; }; &pwm0 { @@ -565,6 +765,17 @@ status = "okay"; }; +&spi1 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + vcc-supply = <&vcc_1v8>; + }; +}; + &tsadc { rockchip,hw-tshut-mode = <1>; rockchip,hw-tshut-polarity = <1>; |