diff options
Diffstat (limited to 'arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 135 |
1 files changed, 91 insertions, 44 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index ccbe3a7a1d2c..587e89d7fc5e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -5,11 +5,11 @@ #include <dt-bindings/pwm/pwm.h> #include "rk3399.dtsi" -#include "rk3399-opp.dtsi" / { aliases { ethernet0 = &gmac; + i2c10 = &i2c10; mmc0 = &sdhci; }; @@ -40,7 +40,7 @@ #clock-cells = <0>; }; - vcc1v2_phy: vcc1v2-phy { + vcc1v2_phy: regulator-vcc1v2-phy { compatible = "regulator-fixed"; regulator-name = "vcc1v2_phy"; regulator-always-on; @@ -50,7 +50,7 @@ vin-supply = <&vcc5v0_sys>; }; - vcc3v3_sys: vcc3v3-sys { + vcc3v3_sys: regulator-vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; regulator-always-on; @@ -60,17 +60,7 @@ vin-supply = <&vcc5v0_sys>; }; - vcc5v0_host: vcc5v0-host-regulator { - compatible = "regulator-fixed"; - gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en>; - regulator-name = "vcc5v0_host"; - regulator-always-on; - vin-supply = <&vcc5v0_sys>; - }; - - vcc5v0_sys: vcc5v0-sys { + vcc5v0_sys: regulator-vcc5v0-sys { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; regulator-always-on; @@ -79,7 +69,7 @@ regulator-max-microvolt = <5000000>; }; - vcca_0v9: vcca-0v9-regulator { + vcca_0v9: regulator-vcca-0v9 { compatible = "regulator-fixed"; regulator-name = "vcca_0v9"; regulator-always-on; @@ -89,7 +79,7 @@ vin-supply = <&vcc_1v8>; }; - vcca_1v8: vcca-1v8-regulator { + vcca_1v8: regulator-vcca-1v8 { compatible = "regulator-fixed"; regulator-name = "vcca_1v8"; regulator-always-on; @@ -99,7 +89,7 @@ vin-supply = <&vcc3v3_sys>; }; - vdd_log: vdd-log { + vdd_log: regulator-vdd-log { compatible = "pwm-regulator"; pwms = <&pwm2 0 25000 1>; pwm-supply = <&vcc5v0_sys>; @@ -154,6 +144,22 @@ }; }; +&gpio3 { + /* + * The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module + * eMMC and SPI flash powered-down initially (in fact it keeps the + * reset signal asserted). BIOS_DISABLE_OVERRIDE pin allows to override + * that signal so that eMMC and SPI can be used regardless of the state + * of the signal. + */ + bios-disable-override-hog { + gpios = <RK_PD5 GPIO_ACTIVE_LOW>; + gpio-hog; + line-name = "bios_disable_override"; + output-high; + }; +}; + &gmac { assigned-clocks = <&cru SCLK_RMII_SRC>; assigned-clock-parents = <&clkin_gmac>; @@ -166,8 +172,7 @@ snps,reset-active-low; snps,reset-delays-us = <0 10000 50000>; tx_delay = <0x10>; - rx_delay = <0x10>; - status = "okay"; + rx_delay = <0x23>; }; &gpu { @@ -190,7 +195,7 @@ clock-output-names = "xin32k", "rk808-clkout2"; pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; + system-power-controller; wakeup-source; vcc1-supply = <&vcc5v0_sys>; @@ -373,19 +378,38 @@ }; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; +}; + +&i2c6 { + clock-frequency = <400000>; +}; + &i2c7 { status = "okay"; clock-frequency = <400000>; fan: fan@18 { - compatible = "ti,amc6821"; + compatible = "tsd,mule", "ti,amc6821"; reg = <0x18>; - #cooling-cells = <2>; - }; - rtc_twi: rtc@6f { - compatible = "isil,isl1208"; - reg = <0x6f>; + i2c-mux { + compatible = "tsd,mule-i2c-mux"; + #address-cells = <1>; + #size-cells = <0>; + + i2c10: i2c@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + rtc_twi: rtc@6f { + compatible = "isil,isl1208"; + reg = <0x6f>; + }; + }; + }; }; }; @@ -409,16 +433,16 @@ &i2s0 { pinctrl-0 = <&i2s0_2ch_bus>; + pinctrl-1 = <&i2s0_2ch_bus_bclk_off>; rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; - status = "okay"; }; /* * As Q7 does not specify neither a global nor a RX clock for I2S these * signals are not used. Furthermore I2S0_LRCK_RX is used as GPIO. - * Therefore we have to redefine the i2s0_2ch_bus definition to prevent - * conflicts. + * Therefore we have to redefine the i2s0_2ch_bus and i2s0_2ch_bus_bclk_off + * definitions to prevent conflicts. */ &i2s0_2ch_bus { rockchip,pins = @@ -428,6 +452,14 @@ <3 RK_PD7 1 &pcfg_pull_none>; }; +&i2s0_2ch_bus_bclk_off { + rockchip,pins = + <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>, + <3 RK_PD2 1 &pcfg_pull_none>, + <3 RK_PD3 1 &pcfg_pull_none>, + <3 RK_PD7 1 &pcfg_pull_none>; +}; + &io_domains { status = "okay"; bt656-supply = <&vcc_1v8>; @@ -449,9 +481,14 @@ &pinctrl { pinctrl-names = "default"; - pinctrl-0 = <&q7_thermal_pin>; + pinctrl-0 = <&q7_thermal_pin &bios_disable_override_hog_pin>; gpios { + bios_disable_override_hog_pin: bios-disable-override-hog-pin { + rockchip,pins = + <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>; + }; + q7_thermal_pin: q7-thermal-pin { rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; @@ -480,10 +517,10 @@ }; }; - usb2 { - vcc5v0_host_en: vcc5v0-host-en { + usb { + cy3304_reset: cy3304-reset { rockchip,pins = - <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + <4 RK_PA3 RK_FUNC_GPIO &pcfg_output_high>; }; }; @@ -548,11 +585,6 @@ u2phy1_otg: otg-port { status = "okay"; }; - - u2phy1_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; }; &usbdrd3_1 { @@ -562,12 +594,27 @@ &usbdrd_dwc3_1 { status = "okay"; dr_mode = "host"; -}; + pinctrl-names = "default"; + pinctrl-0 = <&cy3304_reset>; + #address-cells = <1>; + #size-cells = <0>; + + hub_2_0: hub@1 { + compatible = "usb4b4,6502", "usb4b4,6506"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>; + vdd-supply = <&vcc1v2_phy>; + vdd2-supply = <&vcc3v3_sys>; -&usb_host1_ehci { - status = "okay"; -}; + }; -&usb_host1_ohci { - status = "okay"; + hub_3_0: hub@2 { + compatible = "usb4b4,6500", "usb4b4,6504"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>; + vdd-supply = <&vcc1v2_phy>; + vdd2-supply = <&vcc3v3_sys>; + }; }; |