diff options
Diffstat (limited to 'arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts')
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts | 31 |
1 files changed, 18 insertions, 13 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts index 59843a7a199c..3c127c5c2607 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts @@ -8,7 +8,7 @@ #include "rk3566.dtsi" / { - model = "Pine64 RK3566 Quartz64-A Board"; + model = "Pine64 Quartz64 Model A"; compatible = "pine64,quartz64-a", "rockchip,rk3566"; aliases { @@ -117,7 +117,7 @@ }; }; - vcc12v_dcin: vcc12v_dcin { + vcc12v_dcin: regulator-vcc12v-dcin { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; regulator-always-on; @@ -130,7 +130,7 @@ * With no battery attached, also feeds vcc_bat+ * via ON/OFF_BAT jumper */ - vbus: vbus { + vbus: regulator-vbus { compatible = "regulator-fixed"; regulator-name = "vbus"; regulator-always-on; @@ -140,7 +140,7 @@ vin-supply = <&vcc12v_dcin>; }; - vcc3v3_pcie_p: vcc3v3-pcie-p-regulator { + vcc3v3_pcie_p: regulator-vcc3v3-pcie-p { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; @@ -152,7 +152,7 @@ vin-supply = <&vcc_3v3>; }; - vcc5v0_usb: vcc5v0_usb { + vcc5v0_usb: regulator-vcc5v0-usb { compatible = "regulator-fixed"; regulator-name = "vcc5v0_usb"; regulator-always-on; @@ -166,7 +166,7 @@ * the host ports are sourced from vcc5v0_usb * the otg port is sourced from vcc5v0_midu */ - vcc5v0_usb20_host: vcc5v0_usb20_host { + vcc5v0_usb20_host: regulator-vcc5v0-usb20-host { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; @@ -178,7 +178,7 @@ vin-supply = <&vcc5v0_usb>; }; - vcc5v0_usb20_otg: vcc5v0_usb20_otg { + vcc5v0_usb20_otg: regulator-vcc5v0-usb20-otg { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; @@ -188,7 +188,7 @@ vin-supply = <&dcdc_boost>; }; - vcc3v3_sd: vcc3v3_sd { + vcc3v3_sd: regulator-vcc3v3-sd { compatible = "regulator-fixed"; gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -201,7 +201,7 @@ }; /* sourced from vbus and vcc_bat+ via rk817 sw5 */ - vcc_sys: vcc_sys { + vcc_sys: regulator-vcc-sys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; regulator-always-on; @@ -212,7 +212,7 @@ }; /* sourced from vcc_sys, sdio module operates internally at 3.3v */ - vcc_wl: vcc_wl { + vcc_wl: regulator-vcc-wl { compatible = "regulator-fixed"; regulator-name = "vcc_wl"; regulator-always-on; @@ -265,8 +265,12 @@ }; &gmac1 { - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, + <&cru SCLK_GMAC1_RGMII_SPEED>, + <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, + <&cru SCLK_GMAC1>, + <&gmac1_clkin>; clock_in_out = "input"; phy-supply = <&vcc_3v3>; phy-mode = "rgmii"; @@ -347,7 +351,7 @@ #clock-cells = <1>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; - rockchip,system-power-controller; + system-power-controller; #sound-dai-cells = <0>; wakeup-source; @@ -738,6 +742,7 @@ }; &uart1 { + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; status = "okay"; |