diff options
Diffstat (limited to 'arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi | 15 |
1 files changed, 6 insertions, 9 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi index 31aa2b8efe39..6b9aa0e1ad21 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi @@ -8,11 +8,10 @@ #include "rk3566.dtsi" / { - model = "Pine64 RK3566 SoQuartz SOM"; + model = "Pine64 SOQuartz system on module"; compatible = "pine64,soquartz", "rockchip,rk3566"; aliases { - ethernet0 = &gmac1; mmc0 = &sdmmc0; mmc1 = &sdhci; mmc2 = &sdmmc1; @@ -75,7 +74,7 @@ reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>; }; - vbus: vbus-regulator { + vbus: regulator-vbus { compatible = "regulator-fixed"; regulator-name = "vbus"; regulator-always-on; @@ -85,7 +84,7 @@ }; /* sourced from vbus, vbus is provided by the carrier board */ - vcc5v0_sys: vcc5v0-sys-regulator { + vcc5v0_sys: regulator-vcc5v0-sys { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; regulator-always-on; @@ -95,7 +94,7 @@ vin-supply = <&vbus>; }; - vcc3v3_sys: vcc3v3-sys-regulator { + vcc3v3_sys: regulator-vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; regulator-always-on; @@ -214,7 +213,7 @@ clock-output-names = "rk808-clkout1", "rk808-clkout2"; pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; + system-power-controller; wakeup-source; vcc1-supply = <&vcc3v3_sys>; @@ -234,7 +233,6 @@ regulator-boot-on; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; - regulator-init-microvolt = <900000>; regulator-ramp-delay = <6001>; regulator-initial-mode = <0x2>; regulator-state-mem { @@ -249,7 +247,6 @@ regulator-boot-on; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; - regulator-init-microvolt = <900000>; regulator-ramp-delay = <6001>; regulator-initial-mode = <0x2>; regulator-state-mem { @@ -272,7 +269,6 @@ regulator-boot-on; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; - regulator-init-microvolt = <900000>; regulator-initial-mode = <0x2>; regulator-name = "vdd_npu"; regulator-state-mem { @@ -618,6 +614,7 @@ }; &uart1 { + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; uart-has-rtscts; |