diff options
Diffstat (limited to 'arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts')
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts | 189 |
1 files changed, 189 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts new file mode 100644 index 000000000000..d1e3b7e7a280 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + * Copyright (c) 2024 Uwe Kleine-König + */ + +/dts-v1/; + +#include "rk3568-qnap-tsx33.dtsi" + +/ { + model = "Qnap TS-433-4G NAS System 4-Bay"; + compatible = "qnap,ts433", "rockchip,rk3568"; + + aliases { + ethernet0 = &gmac0; + }; + + vcc3v3_pcie: regulator-vcc3v3-pcie { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; + vin-supply = <&dc_12v>; + }; +}; + +/* connected to sata2 */ +&combphy2 { + status = "okay"; +}; + +&gmac0 { + assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; + assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; + assigned-clock-rates = <0>, <125000000>; + clock_in_out = "output"; + phy-handle = <&rgmii_phy0>; + phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus>; + status = "okay"; +}; + +&i2c1 { + /* eeprom for vital-product-data on the backplane */ + eeprom@56 { + compatible = "giantec,gt24c04a", "atmel,24c04"; + reg = <0x56>; + label = "VPD_BP"; + num-addresses = <2>; + pagesize = <16>; + read-only; + }; +}; + +&leds { + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DISK; + gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>; + label = "hdd2:green:disk"; + linux,default-trigger = "disk-activity"; + pinctrl-names = "default"; + pinctrl-0 = <&hdd2_led_pin>; + }; + + led-2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DISK; + gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_LOW>; + label = "hdd3:green:disk"; + linux,default-trigger = "disk-activity"; + pinctrl-names = "default"; + pinctrl-0 = <&hdd3_led_pin>; + }; + + led-3 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DISK; + gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>; + label = "hdd4:green:disk"; + linux,default-trigger = "disk-activity"; + pinctrl-names = "default"; + pinctrl-0 = <&hdd4_led_pin>; + }; +}; + +&mcu { + compatible = "qnap,ts433-mcu"; +}; + +&mdio0 { + rgmii_phy0: ethernet-phy@3 { + /* Motorcomm YT8521 phy */ + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x3>; + pinctrl-0 = <ð_phy0_reset_pin>; + pinctrl-names = "default"; + reset-assert-us = <10000>; + reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>; + }; +}; + +&pcie30phy { + data-lanes = <1 2>; + status = "okay"; +}; + +/* Connected to a JMicron AHCI SATA controller */ +&pcie3x1 { + reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +/* Connected to the 2.5G NIC for the upper network jack */ +&pcie3x2 { + num-lanes = <1>; + reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pinctrl { + gmac0 { + eth_phy0_reset_pin: eth-phy0-reset-pin { + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + hdd2_led_pin: hdd2-led-pin { + rockchip,pins = <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + hdd3_led_pin: hdd3-led-pin { + rockchip,pins = <1 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + hdd4_led_pin: hdd4_led-pin { + rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&sata2 { + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +/* connected to usb_host1_ehci/ohci */ +&usb2phy1_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +/* connected to usb_host0_ehci/ohci */ +&usb2phy1_otg { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +/* right port backside */ +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +/* left port backside */ +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; |