diff options
Diffstat (limited to 'arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts')
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts | 392 |
1 files changed, 374 insertions, 18 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts index 39d65002add1..ebe77cdd24e8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts @@ -8,6 +8,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> #include <dt-bindings/usb/pd.h> #include "rk3588.dtsi" @@ -32,6 +33,7 @@ aliases { ethernet0 = &gmac0; + i2c10 = &i2c10; mmc0 = &sdhci; mmc1 = &sdmmc; rtc0 = &rtc_twi; @@ -42,7 +44,7 @@ }; /* DCIN is 12-24V but standard is 12V */ - dc_12v: dc-12v-regulator { + dc_12v: regulator-dc-12v { compatible = "regulator-fixed"; regulator-name = "dc_12v"; regulator-always-on; @@ -58,6 +60,17 @@ reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>; }; + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi0_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -72,12 +85,33 @@ }; }; + /* + * 100MHz reference clock for PCIe peripherals from PI6C557-05BLE + * clock generator. + * The clock output is gated via the OE pin on the clock generator. + * This is modeled as a fixed-clock plus a gpio-gate-clock. + */ + pcie_refclk_gen: pcie-refclk-gen-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + pcie_refclk: pcie-refclk-clock { + compatible = "gpio-gate-clock"; + clocks = <&pcie_refclk_gen>; + #clock-cells = <0>; + enable-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>; /* PCIE30X4_CLKREQN_M0 */ + pinctrl-names = "default"; + pinctrl-0 = <&pcie30x4_clkreqn_m0>; + }; + pps { compatible = "pps-gpio"; gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; }; - vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { compatible = "regulator-fixed"; regulator-name = "vcc_1v1_nldo_s3"; regulator-always-on; @@ -87,7 +121,7 @@ vin-supply = <&vcc5v0_sys>; }; - vcc_1v2_s3: vcc-1v2-s3-regulator { + vcc_1v2_s3: regulator-vcc-1v2-s3 { compatible = "regulator-fixed"; regulator-name = "vcc_1v2_s3"; regulator-always-on; @@ -98,7 +132,7 @@ }; /* Exposed on P14 and P15 */ - vcc_2v8_s3: vcc-2v8-s3-regulator { + vcc_2v8_s3: regulator-vcc-2v8-s3 { compatible = "regulator-fixed"; regulator-name = "vcc_2v8_s3"; regulator-always-on; @@ -108,7 +142,7 @@ vin-supply = <&vcc_3v3_s3>; }; - vcc_5v0_usb_a: vcc-5v0-usb-a-regulator { + vcc_5v0_usb_a: regulator-vcc-5v0-usb-a { compatible = "regulator-fixed"; regulator-name = "usb_a_vcc"; regulator-min-microvolt = <5000000>; @@ -118,7 +152,7 @@ enable-active-high; }; - vcc_5v0_usb_c1: vcc-5v0-usb-c1-regulator { + vcc_5v0_usb_c1: regulator-vcc-5v0-usb-c1 { compatible = "regulator-fixed"; regulator-name = "5v_usbc1"; regulator-min-microvolt = <5000000>; @@ -128,7 +162,7 @@ enable-active-high; }; - vcc_5v0_usb_c2: vcc-5v0-usb-c2-regulator { + vcc_5v0_usb_c2: regulator-vcc-5v0-usb-c2 { compatible = "regulator-fixed"; regulator-name = "5v_usbc2"; regulator-min-microvolt = <5000000>; @@ -138,7 +172,7 @@ enable-active-high; }; - vcc3v3_mdot2: vcc3v3-mdot2-regulator { + vcc3v3_mdot2: regulator-vcc3v3-mdot2 { compatible = "regulator-fixed"; regulator-name = "vcc3v3_mdot2"; regulator-always-on; @@ -148,7 +182,7 @@ vin-supply = <&dc_12v>; }; - vcc5v0_sys: vcc5v0-sys-regulator { + vcc5v0_sys: regulator-vcc5v0-sys { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; regulator-always-on; @@ -158,7 +192,7 @@ vin-supply = <&dc_12v>; }; - vcc5v0_usb: vcc5v0-usb-regulator { + vcc5v0_usb: regulator-vcc5v0-usb { compatible = "regulator-fixed"; regulator-name = "vcc5v0_usb"; regulator-always-on; @@ -245,13 +279,112 @@ }; }; +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&hdmi0 { + /* No CEC on Jaguar */ + pinctrl-names = "default"; + pinctrl-0 = <&hdmim0_tx0_hpd &hdmim0_tx0_scl &hdmim0_tx0_sda>; + status = "okay"; +}; + +&hdmi0_in { + hdmi0_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi0>; + }; +}; + +&hdmi0_out { + hdmi0_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi0_sound { + status = "okay"; +}; + +&hdptxphy0 { + status = "okay"; +}; + &i2c0 { pinctrl-0 = <&i2c0m2_xfer>; status = "okay"; fan@18 { - compatible = "ti,amc6821"; + compatible = "tsd,mule", "ti,amc6821"; reg = <0x18>; + + i2c-mux { + compatible = "tsd,mule-i2c-mux"; + #address-cells = <1>; + #size-cells = <0>; + + i2c10: i2c@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + rtc_twi: rtc@6f { + compatible = "isil,isl1208"; + reg = <0x6f>; + }; + }; + }; + }; + + typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio4>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cc_int1>; + vbus-supply = <&vcc_5v0_usb_c1>; + + connector { + compatible = "usb-c-connector"; + data-role = "dual"; + label = "USBC-1 P11"; + power-role = "source"; + self-powered; + source-pdos = + <PDO_FIXED(5000, 1500, PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM)>; + vbus-supply = <&vcc_5v0_usb_c1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usbc0_hs: endpoint { + remote-endpoint = <&usb_host0_xhci_drd_sw>; + }; + }; + + port@1 { + reg = <1>; + + usbc0_ss: endpoint { + remote-endpoint = <&usbdp_phy0_typec_ss>; + }; + }; + + port@2 { + reg = <2>; + + usbc0_sbu: endpoint { + remote-endpoint = <&usbdp_phy0_typec_sbu>; + }; + }; + }; + }; }; vdd_npu_s0: regulator@42 { @@ -287,11 +420,6 @@ regulator-off-in-suspend; }; }; - - rtc_twi: rtc@6f { - compatible = "isil,isl1208"; - reg = <0x6f>; - }; }; &i2c1 { @@ -320,6 +448,56 @@ pinctrl-0 = <&i2c8m2_xfer>; status = "okay"; + typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio4>; + interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cc_int2>; + vbus-supply = <&vcc_5v0_usb_c2>; + + connector { + compatible = "usb-c-connector"; + data-role = "dual"; + label = "USBC-2 P12"; + power-role = "source"; + self-powered; + source-pdos = + <PDO_FIXED(5000, 1500, PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM)>; + vbus-supply = <&vcc_5v0_usb_c2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usbc1_hs: endpoint { + remote-endpoint = <&usb_host1_xhci_drd_sw>; + }; + }; + + port@1 { + reg = <1>; + + usbc1_ss: endpoint { + remote-endpoint = <&usbdp_phy1_typec_ss>; + }; + }; + + port@2 { + reg = <2>; + + usbc1_sbu: endpoint { + remote-endpoint = <&usbdp_phy1_typec_sbu>; + }; + }; + }; + }; + }; + vdd_cpu_big0_s0: regulator@42 { compatible = "rockchip,rk8602"; reg = <0x42>; @@ -338,6 +516,10 @@ }; }; +&i2s5_8ch { + status = "okay"; +}; + &mdio0 { rgmii_phy: ethernet-phy@6 { /* KSZ9031 or KSZ9131 */ @@ -353,6 +535,34 @@ status = "okay"; }; +&pcie30phy { + status = "okay"; +}; + +&pcie3x4 { + /* + * The board has a gpio-controlled "pcie_refclk" generator, + * so add it to the list of clocks. + */ + clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>, + <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>, + <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>, + <&pcie_refclk>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", + "aux", "pipe", + "ref"; + pinctrl-names = "default"; + pinctrl-0 = <&pcie30x4_waken_m0 &pcie30x4_perstn_m0>; + reset-gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_HIGH>; /* PCIE30X4_PERSTN_M0 */ + vpcie3v3-supply = <&vcc3v3_mdot2>; + status = "okay"; +}; + +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { emmc { emmc_reset: emmc-reset { @@ -371,6 +581,40 @@ rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + pcie30x4 { + pcie30x4_clkreqn_m0: pcie30x4-clkreqn-m0 { + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie30x4_perstn_m0: pcie30x4-perstn-m0 { + rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie30x4_waken_m0: pcie30x4-waken-m0 { + rockchip,pins = <0 RK_PC7 12 &pcfg_pull_none>; + }; + }; + + usb3 { + cc_int1: cc-int1 { + rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + cc_int2: cc-int2 { + rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + typec0_sbu_dc_pins: typec0-sbu-dc-pins { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>, + <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + typec1_sbu_dc_pins: typec1-sbu-dc-pins { + rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>, + <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; }; &saradc { @@ -391,7 +635,6 @@ non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_data_strobe>; - supports-cqe; vmmc-supply = <&vcc_3v3_s3>; vqmmc-supply = <&vcc_1v8_s3>; status = "okay"; @@ -452,7 +695,7 @@ vcca-supply = <&vcc5v0_sys>; rk806_dvs1_null: dvs1-null-pins { - pins = "gpio_pwrctrl2"; + pins = "gpio_pwrctrl1"; function = "pin_fun0"; }; @@ -739,6 +982,24 @@ status = "okay"; }; +/* USB-C P11 connector */ +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +/* USB-C P12 connector */ +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + &u2phy2 { status = "okay"; }; @@ -781,6 +1042,56 @@ status = "okay"; }; +/* Type-C on P11 */ +&usbdp_phy0 { + orientation-switch; + pinctrl-names = "default"; + pinctrl-0 = <&typec0_sbu_dc_pins>; + sbu1-dc-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; /* Q7_USB_C0_SBU1_DC */ + sbu2-dc-gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>; /* Q7_USB_C0_SBU2_DC */ + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + usbdp_phy0_typec_ss: endpoint@0 { + reg = <0>; + remote-endpoint = <&usbc0_ss>; + }; + + usbdp_phy0_typec_sbu: endpoint@1 { + reg = <1>; + remote-endpoint = <&usbc0_sbu>; + }; + }; +}; + +/* Type-C on P12 */ +&usbdp_phy1 { + orientation-switch; + pinctrl-names = "default"; + pinctrl-0 = <&typec1_sbu_dc_pins>; + sbu1-dc-gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; /* Q7_USB_C1_SBU1_DC */ + sbu2-dc-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; /* Q7_USB_C1_SBU2_DC */ + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + usbdp_phy1_typec_ss: endpoint@0 { + reg = <0>; + remote-endpoint = <&usbc1_ss>; + }; + + usbdp_phy1_typec_sbu: endpoint@1 { + reg = <1>; + remote-endpoint = <&usbc1_sbu>; + }; + }; +}; + /* host0 on P10 USB-A */ &usb_host0_ehci { status = "okay"; @@ -791,6 +1102,36 @@ status = "okay"; }; +/* host0 on P11 USB-C */ +&usb_host0_xhci { + usb-role-switch; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + usb_host0_xhci_drd_sw: endpoint { + remote-endpoint = <&usbc0_hs>; + }; + }; +}; + +/* host1 on P12 USB-C */ +&usb_host1_xhci { + usb-role-switch; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + usb_host1_xhci_drd_sw: endpoint { + remote-endpoint = <&usbc1_hs>; + }; + }; +}; + /* host1 on M.2 E-key */ &usb_host1_ehci { status = "okay"; @@ -800,3 +1141,18 @@ &usb_host1_ohci { status = "okay"; }; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi0_in_vp0>; + }; +}; |