diff options
Diffstat (limited to 'arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi | 178 |
1 files changed, 178 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi new file mode 100644 index 000000000000..9343dfc86941 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi @@ -0,0 +1,178 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3588-orangepi-5.dtsi" + +/ { + vcc5v0_usb30_otg: vcc5v0-usb30-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + /* USB_OTG_PWREN */ + gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg_pwren>; + regulator-name = "vcc5v0_usb30_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&headphone_amp { + /* PHONE_CTL */ + enable-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; +}; + +&analog_sound { + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + simple-audio-card,aux-devs = <&headphone_amp>; + simple-audio-card,hp-det-gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>; + + simple-audio-card,routing = + "Headphones", "LOUT1", + "Headphones", "ROUT1", + "LINPUT1", "Microphone Jack", + "RINPUT1", "Microphone Jack", + "LINPUT2", "Onboard Microphone", + "RINPUT2", "Onboard Microphone"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Microphone", "Onboard Microphone", + "Headphone", "Headphones"; +}; + +&fan { + /* FAN_CTL_H */ + pwms = <&pwm9 0 50000 0>; +}; + +&hym8563 { + interrupt-parent = <&gpio0>; + interrupts = <RK_PC4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_int_l>; +}; + +&led_blue_pwm { + /* PWM_LED1 */ + status = "okay"; +}; + +/* phy2 */ +&pcie2x1l1 { + reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie_eth>; + status = "okay"; +}; + +&pinctrl { + hym8563 { + rtc_int_l: hym8563-int { + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sound { + hp_detect: hp-detect { + rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + usb_host_pwren: usb-host-pwren { + rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wireless-bluetooth { + bt_reg_on: bt-reg-on { + rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_host: bt-wake-host { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + host_wake_bt: host-wake-bt { + rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm4m0_pins>; + status = "okay"; +}; + +&pwm5 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm5m1_pins>; + status = "okay"; +}; + +&pwm9 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm9m2_pins>; + status = "okay"; +}; + +&sfc { + pinctrl-names = "default"; + pinctrl-0 = <&fspim2_pins>; +}; + +&u2phy0_otg { + phy-supply = <&vcc5v0_usb30_otg>; +}; + +&u2phy1_otg { + phy-supply = <&vcc5v0_usb20>; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7m0_xfer &uart7m0_ctsn &uart7m0_rtsn>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&hym8563>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA0 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wakeup"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_reg_on>, <&host_wake_bt>, <&bt_wake_host>; + shutdown-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>; + vbat-supply = <&vcc_3v3_s3>; + vddio-supply = <&vcc_1v8_s3>; + }; +}; + +&usb_host0_xhci { + dr_mode = "host"; +}; + +/* pcie eth. not a real regulator. 33VAUX */ +&vcc3v3_pcie_eth { + /* Ethernet_power_en */ + gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>; +}; + +/* + * Represents the vcc5v0_usb20 and vcc5v0_usb30 in the schematic, + * both regulators share the same enable gpio + */ +&vcc5v0_usb20 { + /* USB_HOST_PWREN */ + gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwren>; +}; |