diff options
Diffstat (limited to 'arch/arm64/boot/dts/ti/k3-am62a7-sk.dts')
| -rw-r--r-- | arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 207 |
1 files changed, 196 insertions, 11 deletions
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts index a6f0d87a50d8..e99bdbc2e0cb 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts @@ -18,10 +18,13 @@ aliases { serial0 = &wkup_uart0; + serial1 = &mcu_uart0; serial2 = &main_uart0; serial3 = &main_uart1; mmc0 = &sdhci0; mmc1 = &sdhci1; + rtc0 = &wkup_rtc0; + rtc1 = &tps659312; }; chosen { @@ -33,9 +36,10 @@ /* 4G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>, <0x00000008 0x80000000 0x00000000 0x80000000>; + bootph-all; }; - reserved-memory { + reserved_memory: reserved-memory { #address-cells = <2>; #size-cells = <2>; ranges; @@ -49,6 +53,18 @@ linux,cma-default; }; + wkup_r5fss0_core0_dma_memory_region: memory@9c800000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9c800000 0x00 0x100000>; + no-map; + }; + + wkup_r5fss0_core0_memory_region: memory@9c900000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9c900000 0x00 0xf00000>; + no-map; + }; + secure_tfa_ddr: tfa@9e780000 { reg = <0x00 0x9e780000 0x00 0x80000>; alignment = <0x1000>; @@ -60,12 +76,6 @@ alignment = <0x1000>; no-map; }; - - wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 { - compatible = "shared-dma-pool"; - reg = <0x00 0x9c900000 0x00 0x01e00000>; - no-map; - }; }; opp-table { @@ -118,6 +128,7 @@ regulator-boot-on; enable-active-high; gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; + bootph-all; }; vcc_3v3_sys: regulator-4 { @@ -222,6 +233,10 @@ &wkup_uart0 { pinctrl-names = "default"; pinctrl-0 = <&wkup_uart0_pins_default>; + wakeup-source = <&system_io_ddr>, + <&system_deep_sleep>, + <&system_mcu_only>, + <&system_standby>; status = "reserved"; }; @@ -264,12 +279,13 @@ AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (E14) UART0_RXD */ AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */ >; + bootph-all; }; main_uart1_pins_default: main-uart1-default-pins { pinctrl-single,pins = < - AM62AX_IOPAD(0x01e8, PIN_INPUT, 1) /* (C17) I2C1_SCL.UART1_RXD */ - AM62AX_IOPAD(0x01ec, PIN_OUTPUT, 1) /* (E17) I2C1_SDA.UART1_TXD */ + AM62AX_IOPAD(0x01ac, PIN_INPUT, 2) /* (B21) MCASP0_AFSR.UART1_RXD */ + AM62AX_IOPAD(0x01b0, PIN_OUTPUT, 2) /* (A21) MCASP0_ACLKR.UART1_TXD */ AM62AX_IOPAD(0x0194, PIN_INPUT, 2) /* (C19) MCASP0_AXR3.UART1_CTSn */ AM62AX_IOPAD(0x0198, PIN_OUTPUT, 2) /* (B19) MCASP0_AXR2.UART1_RTSn */ >; @@ -287,6 +303,7 @@ AM62AX_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ AM62AX_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ >; + bootph-all; }; main_i2c2_pins_default: main-i2c2-default-pins { @@ -310,6 +327,7 @@ AM62AX_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */ AM62AX_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */ >; + bootph-all; }; main_mmc1_pins_default: main-mmc1-default-pins { @@ -322,6 +340,7 @@ AM62AX_IOPAD(0x224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */ AM62AX_IOPAD(0x240, PIN_INPUT, 0) /* (D17) MMC1_SDCD */ >; + bootph-all; }; usr_led_pins_default: usr-led-default-pins { @@ -341,6 +360,7 @@ AM62AX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */ AM62AX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */ >; + bootph-all; }; main_rgmii1_pins_default: main-rgmii1-default-pins { @@ -358,6 +378,7 @@ AM62AX_IOPAD(0x130, PIN_INPUT, 0) /* (AB17) RGMII1_TXC */ AM62AX_IOPAD(0x12c, PIN_INPUT, 0) /* (W16) RGMII1_TX_CTL */ >; + bootph-all; }; main_mcasp1_pins_default: main-mcasp1-default-pins { @@ -380,6 +401,25 @@ AM62AX_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */ >; }; + + main_ecap0_pins_default: main-ecap0-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x01b8, PIN_OUTPUT, 3) /* (C16) SPI0_CS1.ECAP0_IN_APWM_OUT */ + >; + }; + + main_ecap2_pins_default: main-ecap2-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x01a4, PIN_OUTPUT, 2) /* (A19) MCASP0_ACLKX.ECAP2_IN_APWM_OUT */ + >; + }; + + main_epwm1_pins_default: main-epwm1-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x019c, PIN_OUTPUT, 6) /* (B18) MCASP0_AXR1.EHRPWM1_A */ + AM62AX_IOPAD(0x01a0, PIN_OUTPUT, 6) /* (B20) MCASP0_AXR0.EHRPWM1_B */ + >; + }; }; &mcu_pmx0 { @@ -390,6 +430,42 @@ AM62AX_MCU_IOPAD(0x000, PIN_INPUT, 7) /* (E11) MCU_GPIO0_0 */ >; }; + + mcu_mcan0_tx_pins_default: mcu-mcan0-tx-default-pins { + pinctrl-single,pins = < + AM62AX_MCU_IOPAD(0x034, PIN_OUTPUT, 0) /* (D6) MCU_MCAN0_TX */ + >; + }; + + mcu_mcan0_rx_pins_default: mcu-mcan0-rx-default-pins { + pinctrl-single,pins = < + AM62AX_MCU_IOPAD(0x038, PIN_INPUT, 0) /* (B3) MCU_MCAN0_RX */ + >; + }; + + mcu_mcan0_rx_pins_wakeup: mcu-mcan0-rx-wakeup-pins { + pinctrl-single,pins = < + AM62AX_MCU_IOPAD(0x038, PIN_INPUT | PIN_WKUP_EN, 0) /* (B3) MCU_MCAN0_RX */ + >; + }; + + mcu_mcan1_tx_pins_default: mcu-mcan1-tx-default-pins { + pinctrl-single,pins = < + AM62AX_MCU_IOPAD(0x03c, PIN_OUTPUT, 0) /* (E5) MCU_MCAN1_TX */ + >; + }; + + mcu_mcan1_rx_pins_default: mcu-mcan1-rx-default-pins { + pinctrl-single,pins = < + AM62AX_MCU_IOPAD(0x040, PIN_INPUT, 0) /* (D4) MCU_MCAN1_RX */ + >; + }; + + mcu_mcan1_rx_pins_wakeup: mcu-mcan1-rx-wakeup-pins { + pinctrl-single,pins = < + AM62AX_MCU_IOPAD(0x040, PIN_INPUT | PIN_WKUP_EN, 0) /* (D4) MCU_MCAN1_RX */ + >; + }; }; &mcu_gpio0 { @@ -519,6 +595,7 @@ #interrupt-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>; + bootph-all; gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST", "BT_EN_SOC", "MMC1_SD_EN", @@ -611,7 +688,7 @@ non-removable; pinctrl-names = "default"; pinctrl-0 = <&main_mmc0_pins_default>; - disable-wp; + bootph-all; }; &sdhci1 { @@ -622,10 +699,12 @@ pinctrl-names = "default"; pinctrl-0 = <&main_mmc1_pins_default>; disable-wp; + bootph-all; }; &main_gpio0 { status = "okay"; + bootph-all; }; &main_gpio1 { @@ -640,6 +719,7 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; + bootph-all; }; /* Main UART1 is used for TIFS firmware logs */ @@ -655,6 +735,7 @@ }; &usb0 { + bootph-all; usb-role-switch; port { @@ -664,6 +745,10 @@ }; }; +&usb0_phy_ctrl { + bootph-all; +}; + &usbss1 { status = "okay"; }; @@ -680,10 +765,15 @@ pinctrl-0 = <&main_rgmii1_pins_default>; }; +&phy_gmii_sel { + bootph-all; +}; + &cpsw_port1 { status = "okay"; - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&cpsw3g_phy0>; + bootph-all; }; &cpsw_port2 { @@ -700,6 +790,7 @@ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; ti,min-output-impedance; + bootph-all; }; }; @@ -737,3 +828,97 @@ }; }; }; + +&ecap0 { + /* P26 of J3 */ + pinctrl-names = "default"; + pinctrl-0 = <&main_ecap0_pins_default>; + status = "okay"; +}; + +&ecap2 { + /* P11 of J3 */ + pinctrl-names = "default"; + pinctrl-0 = <&main_ecap2_pins_default>; + status = "okay"; +}; + +&epwm1 { + /* P36/P33 of J3 */ + pinctrl-names = "default"; + pinctrl-0 = <&main_epwm1_pins_default>; + status = "okay"; +}; + +&fss { + status = "okay"; +}; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&ospi0_pins_default>; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <2>; + bootph-all; + }; +}; + +&main_pmx0 { + ospi0_pins_default: ospi0-default-pins { + bootph-all; + pinctrl-single,pins = < + AM62AX_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */ + AM62AX_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */ + AM62AX_IOPAD(0x00c, PIN_INPUT, 0) /* (E25) OSPI0_D0 */ + AM62AX_IOPAD(0x010, PIN_INPUT, 0) /* (G24) OSPI0_D1 */ + AM62AX_IOPAD(0x014, PIN_INPUT, 0) /* (F25) OSPI0_D2 */ + AM62AX_IOPAD(0x018, PIN_INPUT, 0) /* (F24) OSPI0_D3 */ + AM62AX_IOPAD(0x01c, PIN_INPUT, 0) /* (J23) OSPI0_D4 */ + AM62AX_IOPAD(0x020, PIN_INPUT, 0) /* (J25) OSPI0_D5 */ + AM62AX_IOPAD(0x024, PIN_INPUT, 0) /* (H25) OSPI0_D6 */ + AM62AX_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */ + AM62AX_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */ + >; + }; +}; + +&mcu_mcan0 { + pinctrl-names = "default", "wakeup"; + pinctrl-0 = <&mcu_mcan0_tx_pins_default>, <&mcu_mcan0_rx_pins_default>; + pinctrl-1 = <&mcu_mcan0_tx_pins_default>, <&mcu_mcan0_rx_pins_wakeup>; + wakeup-source = <&system_partial_io>, + <&system_io_ddr>, + <&system_deep_sleep>, + <&system_mcu_only>, + <&system_standby>; +}; + +&mcu_mcan1 { + pinctrl-names = "default", "wakeup"; + pinctrl-0 = <&mcu_mcan1_tx_pins_default>, <&mcu_mcan1_rx_pins_default>; + pinctrl-1 = <&mcu_mcan1_tx_pins_default>, <&mcu_mcan1_rx_pins_wakeup>; + wakeup-source = <&system_partial_io>, + <&system_io_ddr>, + <&system_deep_sleep>, + <&system_mcu_only>, + <&system_standby>; +}; + +&mcu_uart0 { + wakeup-source = <&system_io_ddr>, + <&system_deep_sleep>, + <&system_mcu_only>, + <&system_standby>; +}; + +#include "k3-am62a-ti-ipc-firmware.dtsi" |