diff options
Diffstat (limited to 'arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi | 33 |
1 files changed, 27 insertions, 6 deletions
diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi index 99a6fdfaa7fb..d9d491b12c33 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi @@ -27,6 +27,7 @@ memory@80000000 { device_type = "memory"; reg = <0x00000000 0x80000000 0x00000000 0x80000000>; + bootph-all; }; reserved_memory: reserved-memory { @@ -99,6 +100,12 @@ reg = <0x00 0xa4100000 0x00 0xf00000>; no-map; }; + + rtos_ipc_memory_region: ipc-memories@a5000000 { + reg = <0x00 0xa5000000 0x00 0x00800000>; + alignment = <0x1000>; + no-map; + }; }; leds { @@ -132,6 +139,7 @@ AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */ AM64X_IOPAD(0x0100, PIN_OUTPUT, 7) /* (V7) PRG1_PRU0_GPO18.GPIO0_63 */ >; + bootph-all; }; cpsw_rgmii1_pins_default: cpsw-rgmii1-default-pins { @@ -150,6 +158,7 @@ AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */ AM64X_IOPAD(0x0154, PIN_INPUT, 7) /* (V12) PRG1_PRU1_GPO19.GPIO0_84 */ >; + bootph-all; }; eeprom_wp_pins_default: eeprom-wp-default-pins { @@ -169,6 +178,7 @@ AM64X_IOPAD(0x0260, PIN_INPUT, 0) /* (A18) I2C0_SCL */ AM64X_IOPAD(0x0264, PIN_INPUT, 0) /* (B18) I2C0_SDA */ >; + bootph-all; }; ospi0_pins_default: ospi0-default-pins { @@ -185,6 +195,7 @@ AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */ AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */ >; + bootph-all; }; rtc_pins_default: rtc-defaults-pins { @@ -201,26 +212,29 @@ }; &cpsw3g_mdio { - status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&cpsw_mdio_pins_default>; + bootph-all; + status = "okay"; cpsw3g_phy1: ethernet-phy@1 { compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22"; reg = <1>; interrupt-parent = <&main_gpio0>; interrupts = <84 IRQ_TYPE_EDGE_FALLING>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; - ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; reset-gpios = <&main_gpio0 63 GPIO_ACTIVE_LOW>; reset-assert-us = <1000>; reset-deassert-us = <1000>; + bootph-all; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; }; }; &cpsw_port1 { phy-mode = "rgmii-rxid"; phy-handle = <&cpsw3g_phy1>; + bootph-all; status = "okay"; }; @@ -262,10 +276,11 @@ }; &main_i2c0 { - status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_i2c0_pins_default>; clock-frequency = <400000>; + bootph-all; + status = "okay"; eeprom@50 { compatible = "atmel,24c32"; @@ -330,6 +345,10 @@ }; }; +&main_pktdma { + bootph-all; +}; + &main_r5fss0_core0 { mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, @@ -362,9 +381,9 @@ }; &ospi0 { - status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&ospi0_pins_default>; + status = "okay"; serial_flash: flash@0 { compatible = "jedec,spi-nor"; @@ -377,15 +396,17 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <0>; + bootph-all; }; }; &sdhci0 { - status = "okay"; non-removable; ti,driver-strength-ohm = <50>; disable-wp; keep-power-in-suspend; + bootph-all; + status = "okay"; }; &tscadc0 { |