diff options
Diffstat (limited to 'arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts')
| -rw-r--r-- | arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 35 |
1 files changed, 26 insertions, 9 deletions
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts index 44d1f351bb75..4ec8a400494e 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts @@ -123,17 +123,29 @@ io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>; }; - si5335_0: si5335_0 { /* clk0_usb - u23 */ + si5335_0: si5335-0 { /* clk0_usb - u23 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <26000000>; }; - si5335_1: si5335_1 { /* clk1_dp - u23 */ + si5335_1: si5335-1 { /* clk1_dp - u23 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <27000000>; }; + + dpcon { + compatible = "dp-connector"; + label = "P11"; + type = "full-size"; + + port { + dpcon_in: endpoint { + remote-endpoint = <&dpsub_dp_out>; + }; + }; + }; }; &dcc { @@ -180,8 +192,8 @@ pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1_default>; pinctrl-1 = <&pinctrl_i2c1_gpio>; - scl-gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; - sda-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; clock-frequency = <100000>; i2c-mux@75 { /* u11 */ compatible = "nxp,pca9548"; @@ -275,7 +287,7 @@ }; }; - pinctrl_i2c1_gpio: i2c1-gpio { + pinctrl_i2c1_gpio: i2c1-gpio-grp { mux { groups = "gpio0_4_grp", "gpio0_5_grp"; function = "gpio0"; @@ -509,6 +521,9 @@ xlnx,mio-bank = <0>; non-removable; disable-wp; + no-sd; + no-sdio; + cap-mmc-hw-reset; cap-power-off-card; mmc-pwrseq = <&sdio_pwrseq>; vqmmc-supply = <&wmmcsdio_fixed>; @@ -590,10 +605,6 @@ status = "okay"; }; -&xilinx_ams { - status = "okay"; -}; - &ams_ps { status = "okay"; }; @@ -608,3 +619,9 @@ phys = <&psgtr 1 PHY_TYPE_DP 0 1>, <&psgtr 0 PHY_TYPE_DP 1 1>; }; + +&out_dp { + dpsub_dp_out: endpoint { + remote-endpoint = <&dpcon_in>; + }; +}; |