diff options
Diffstat (limited to 'arch/arm64/boot/dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/Makefile | 3 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi | 59 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts | 24 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts | 29 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts | 56 |
5 files changed, 171 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 804e7ec38eca..fa8f8b66bb02 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -15,6 +15,9 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-e5.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-e7.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-grandmax.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-j5.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi new file mode 100644 index 000000000000..9caa8a161d31 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916-samsung-a2015-common.dtsi" + +/ { + haptic { + compatible = "regulator-haptic"; + haptic-supply = <®_motor_vdd>; + min-microvolt = <3300000>; + max-microvolt = <3300000>; + }; + + i2c-muic { + /* SM5504 MUIC instead of SM5502 */ + /delete-node/ extcon@25; + + muic: extcon@14 { + compatible = "siliconmitus,sm5504-muic"; + reg = <0x14>; + + interrupt-parent = <&msmgpio>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_int_default>; + }; + }; + + reg_motor_vdd: regulator-motor-vdd { + compatible = "regulator-fixed"; + regulator-name = "motor_vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&motor_en_default>; + }; +}; + +&blsp_i2c2 { + /* lis2hh12 accelerometer instead of BMC150 */ + status = "disabled"; + + /delete-node/ accelerometer@10; + /delete-node/ magnetometer@12; +}; + +&msmgpio { + motor_en_default: motor-en-default { + pins = "gpio76"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts new file mode 100644 index 000000000000..777eb934eb4b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-e2015-common.dtsi" + +/* + * NOTE: The original firmware from Samsung can only boot ARM32 kernels on some + * variants. + * Unfortunately, the firmware is signed and cannot be replaced easily. + * There seems to be no way to boot ARM64 kernels on 32-bit devices at the + * moment, even though the hardware would support it. + * + * However, it is possible to use this device tree by compiling an ARM32 kernel + * instead. For clarity and build testing this device tree is maintained next + * to the other MSM8916 device trees. However, it is actually used through + * arch/arm/boot/dts/qcom-msm8916-samsung-e5.dts + */ + +/ { + model = "Samsung Galaxy E5"; + compatible = "samsung,e5", "qcom,msm8916"; + chassis-type = "handset"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts new file mode 100644 index 000000000000..b412b61ca258 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-e2015-common.dtsi" + +/* + * NOTE: The original firmware from Samsung can only boot ARM32 kernels on some + * variants. + * Unfortunately, the firmware is signed and cannot be replaced easily. + * There seems to be no way to boot ARM64 kernels on 32-bit devices at the + * moment, even though the hardware would support it. + * + * However, it is possible to use this device tree by compiling an ARM32 kernel + * instead. For clarity and build testing this device tree is maintained next + * to the other MSM8916 device trees. However, it is actually used through + * arch/arm/boot/dts/qcom-msm8916-samsung-e7.dts + */ + +/ { + model = "Samsung Galaxy E7"; + compatible = "samsung,e7", "qcom,msm8916"; + chassis-type = "handset"; +}; + +&pm8916_l17 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts new file mode 100644 index 000000000000..4c1becdb9428 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-e2015-common.dtsi" +#include <dt-bindings/leds/common.h> + +/* + * NOTE: The original firmware from Samsung can only boot ARM32 kernels on some + * variants. + * Unfortunately, the firmware is signed and cannot be replaced easily. + * There seems to be no way to boot ARM64 kernels on 32-bit devices at the + * moment, even though the hardware would support it. + * + * However, it is possible to use this device tree by compiling an ARM32 kernel + * instead. For clarity and build testing this device tree is maintained next + * to the other MSM8916 device trees. However, it is actually used through + * arch/arm/boot/dts/qcom-msm8916-samsung-grandmax.dts + */ + +/ { + model = "Samsung Galaxy Grand Max"; + compatible = "samsung,grandmax", "qcom,msm8916"; + chassis-type = "handset"; + + /delete-node/ gpio-hall-sensor; + /delete-node/ i2c-nfc; + /delete-node/ i2c-tkey; + + gpio-leds { + compatible = "gpio-leds"; + keyled { + gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_leds_default>; + }; + }; +}; + +®_motor_vdd { + gpio = <&msmgpio 72 GPIO_ACTIVE_HIGH>; +}; + +&msmgpio { + gpio_leds_default: gpio-led-default { + pins = "gpio60"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; + +&motor_en_default { + pins = "gpio72"; +}; |