diff options
Diffstat (limited to 'arch/arm')
60 files changed, 645 insertions, 356 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3f7714d8d2d2..1ad6fb6c094d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -2217,8 +2217,7 @@ config NEON config KERNEL_MODE_NEON bool "Support for NEON in kernel mode" - default n - depends on NEON + depends on NEON && AEABI help Say Y to include support for NEON in kernel mode. diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index cc0f1fb61753..802720e3e8fd 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -41,6 +41,8 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb +dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb + dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \ bcm28155-ap.dtb @@ -183,6 +185,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ am335x-evm.dtb \ am335x-evmsk.dtb \ am335x-bone.dtb \ + am335x-boneblack.dtb \ am3517-evm.dtb \ am3517_mt_ventoux.dtb \ am43x-epos-evm.dtb diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi new file mode 100644 index 000000000000..2f66deda9f5c --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -0,0 +1,262 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + model = "TI AM335x BeagleBone"; + compatible = "ti,am335x-bone", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + am33xx_pinmux: pinmux@44e10800 { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin>; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + 0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + }; + + ocp { + uart0: serial@44e09000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; + }; + + musb: usb@47400000 { + status = "okay"; + + control@44e10000 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb-phy@47401b00 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + }; + + usb@47401800 { + status = "okay"; + dr_mode = "host"; + }; + + dma-controller@07402000 { + status = "okay"; + }; + }; + + i2c0: i2c@44e0b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; + + }; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + compatible = "gpio-leds"; + + led@2 { + label = "beaglebone:green:heartbeat"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@3 { + label = "beaglebone:green:mmc0"; + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@4 { + label = "beaglebone:green:usr2"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@5 { + label = "beaglebone:green:usr3"; + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; +}; + +/include/ "tps65217.dtsi" + +&tps { + regulators { + dcdc1_reg: regulator@0 { + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1325000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + regulator-always-on; + }; + }; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "mii"; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "mii"; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; +}; diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index d318987d44a1..7993c489982c 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -8,258 +8,4 @@ /dts-v1/; #include "am33xx.dtsi" - -/ { - model = "TI AM335x BeagleBone"; - compatible = "ti,am335x-bone", "ti,am33xx"; - - cpus { - cpu@0 { - cpu0-supply = <&dcdc2_reg>; - }; - }; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; /* 256 MB */ - }; - - am33xx_pinmux: pinmux@44e10800 { - pinctrl-names = "default"; - pinctrl-0 = <&clkout2_pin>; - - user_leds_s0: user_leds_s0 { - pinctrl-single,pins = < - 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ - 0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ - 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ - 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ - >; - }; - - i2c0_pins: pinmux_i2c0_pins { - pinctrl-single,pins = < - 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ - >; - }; - - uart0_pins: pinmux_uart0_pins { - pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ - >; - }; - - clkout2_pin: pinmux_clkout2_pin { - pinctrl-single,pins = < - 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ - >; - }; - - cpsw_default: cpsw_default { - pinctrl-single,pins = < - /* Slave 1 */ - 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ - 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ - 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ - 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ - 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ - 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ - 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ - 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ - 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ - 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ - 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ - 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ - 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ - >; - }; - - cpsw_sleep: cpsw_sleep { - pinctrl-single,pins = < - /* Slave 1 reset value */ - 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) - >; - }; - - davinci_mdio_default: davinci_mdio_default { - pinctrl-single,pins = < - /* MDIO */ - 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ - >; - }; - - davinci_mdio_sleep: davinci_mdio_sleep { - pinctrl-single,pins = < - /* MDIO reset value */ - 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) - >; - }; - }; - - ocp { - uart0: serial@44e09000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - - status = "okay"; - }; - - musb: usb@47400000 { - status = "okay"; - - control@44e10000 { - status = "okay"; - }; - - usb-phy@47401300 { - status = "okay"; - }; - - usb-phy@47401b00 { - status = "okay"; - }; - - usb@47401000 { - status = "okay"; - }; - - usb@47401800 { - status = "okay"; - dr_mode = "host"; - }; - - dma-controller@07402000 { - status = "okay"; - }; - }; - - i2c0: i2c@44e0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - - status = "okay"; - clock-frequency = <400000>; - - tps: tps@24 { - reg = <0x24>; - }; - - }; - }; - - leds { - pinctrl-names = "default"; - pinctrl-0 = <&user_leds_s0>; - - compatible = "gpio-leds"; - - led@2 { - label = "beaglebone:green:heartbeat"; - gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - - led@3 { - label = "beaglebone:green:mmc0"; - gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - default-state = "off"; - }; - - led@4 { - label = "beaglebone:green:usr2"; - gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - led@5 { - label = "beaglebone:green:usr3"; - gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; -}; - -/include/ "tps65217.dtsi" - -&tps { - regulators { - dcdc1_reg: regulator@0 { - regulator-always-on; - }; - - dcdc2_reg: regulator@1 { - /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ - regulator-name = "vdd_mpu"; - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <1325000>; - regulator-boot-on; - regulator-always-on; - }; - - dcdc3_reg: regulator@2 { - /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ - regulator-name = "vdd_core"; - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <1150000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo1_reg: regulator@3 { - regulator-always-on; - }; - - ldo2_reg: regulator@4 { - regulator-always-on; - }; - - ldo3_reg: regulator@5 { - regulator-always-on; - }; - - ldo4_reg: regulator@6 { - regulator-always-on; - }; - }; -}; - -&cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; - phy-mode = "mii"; -}; - -&cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; - phy-mode = "mii"; -}; - -&mac { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cpsw_default>; - pinctrl-1 = <&cpsw_sleep>; - -}; - -&davinci_mdio { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&davinci_mdio_default>; - pinctrl-1 = <&davinci_mdio_sleep>; -}; +#include "am335x-bone-common.dtsi" diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts new file mode 100644 index 000000000000..197cadf72d2c --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index 05e4485a8225..8ac2ac1f69cc 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -27,6 +27,25 @@ }; soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + + pcie-controller { + status = "okay"; + + /* Connected to Marvell SATA controller */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Connected to FL1009 USB 3.0 controller */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; + internal-regs { serial@12000 { clock-frequency = <200000000>; @@ -57,6 +76,11 @@ marvell,pins = "mpp56"; marvell,function = "gpio"; }; + + poweroff: poweroff { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; }; mdio { @@ -89,22 +113,6 @@ pwm_polarity = <0>; }; }; - - pcie-controller { - status = "okay"; - - /* Connected to Marvell SATA controller */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* Connected to FL1009 USB 3.0 controller */ - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; }; }; @@ -160,7 +168,7 @@ button@1 { label = "Power Button"; linux,code = <116>; /* KEY_POWER */ - gpios = <&gpio1 30 1>; + gpios = <&gpio1 30 0>; }; button@2 { @@ -176,4 +184,11 @@ }; }; + gpio_poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&poweroff>; + pinctrl-names = "default"; + gpios = <&gpio0 8 1>; + }; + }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index def125c0eeaa..3058522f5aad 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -70,6 +70,8 @@ timer@20300 { compatible = "marvell,armada-xp-timer"; + clocks = <&coreclk 2>, <&refclk>; + clock-names = "nbclk", "fixed"; }; coreclk: mvebu-sar@18230 { @@ -169,4 +171,13 @@ }; }; }; + + clocks { + /* 25 MHz reference crystal */ + refclk: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index cf78ac0b04b1..e74dc15efa9d 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -190,12 +190,12 @@ AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA8 periph A */ }; - pinctrl_uart2_rts: uart2_rts-0 { + pinctrl_usart2_rts: usart2_rts-0 { atmel,pins = <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */ }; - pinctrl_uart2_cts: uart2_cts-0 { + pinctrl_usart2_cts: usart2_cts-0 { atmel,pins = <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */ }; @@ -556,6 +556,7 @@ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -567,6 +568,7 @@ interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi index 8678e0c11119..6db4f81d4795 100644 --- a/arch/arm/boot/dts/atlas6.dtsi +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -181,6 +181,8 @@ interrupts = <17>; fifosize = <128>; clocks = <&clks 13>; + sirf,uart-dma-rx-channel = <21>; + sirf,uart-dma-tx-channel = <2>; }; uart1: uart@b0060000 { @@ -199,6 +201,8 @@ interrupts = <19>; fifosize = <128>; clocks = <&clks 15>; + sirf,uart-dma-rx-channel = <6>; + sirf,uart-dma-tx-channel = <7>; }; usp0: usp@b0080000 { @@ -206,7 +210,10 @@ compatible = "sirf,prima2-usp"; reg = <0xb0080000 0x10000>; interrupts = <20>; + fifosize = <128>; clocks = <&clks 28>; + sirf,usp-dma-rx-channel = <17>; + sirf,usp-dma-tx-channel = <18>; }; usp1: usp@b0090000 { @@ -214,7 +221,10 @@ compatible = "sirf,prima2-usp"; reg = <0xb0090000 0x10000>; interrupts = <21>; + fifosize = <128>; clocks = <&clks 29>; + sirf,usp-dma-rx-channel = <14>; + sirf,usp-dma-tx-channel = <15>; }; dmac0: dma-controller@b00b0000 { @@ -237,6 +247,8 @@ compatible = "sirf,prima2-vip"; reg = <0xb00C0000 0x10000>; clocks = <&clks 31>; + interrupts = <14>; + sirf,vip-dma-rx-channel = <16>; }; spi0: spi@b00d0000 { diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index c037c223619a..b7a1c6d950b9 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -187,7 +187,7 @@ compatible = "fsl,imx27-cspi"; reg = <0x1000e000 0x1000>; interrupts = <16>; - clocks = <&clks 53>, <&clks 53>; + clocks = <&clks 53>, <&clks 60>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -198,7 +198,7 @@ compatible = "fsl,imx27-cspi"; reg = <0x1000f000 0x1000>; interrupts = <15>; - clocks = <&clks 52>, <&clks 52>; + clocks = <&clks 52>, <&clks 60>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -309,7 +309,7 @@ compatible = "fsl,imx27-cspi"; reg = <0x10017000 0x1000>; interrupts = <6>; - clocks = <&clks 51>, <&clks 51>; + clocks = <&clks 51>, <&clks 60>; clock-names = "ipg", "per"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index a85abb424c34..54cee6517902 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -474,7 +474,7 @@ compatible = "fsl,imx51-pata", "fsl,imx27-pata"; reg = <0x83fe0000 0x4000>; interrupts = <70>; - clocks = <&clks 161>; + clocks = <&clks 172>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6q-pinfunc.h b/arch/arm/boot/dts/imx6q-pinfunc.h index c0e38a45e4bb..9bbe82bdee41 100644 --- a/arch/arm/boot/dts/imx6q-pinfunc.h +++ b/arch/arm/boot/dts/imx6q-pinfunc.h @@ -207,8 +207,8 @@ #define MX6QDL_PAD_EIM_D29__ECSPI4_SS0 0x0c8 0x3dc 0x824 0x2 0x1 #define MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x0c8 0x3dc 0x924 0x4 0x1 #define MX6QDL_PAD_EIM_D29__UART2_CTS_B 0x0c8 0x3dc 0x000 0x4 0x0 -#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x0c4 0x3dc 0x000 0x4 0x0 -#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B 0x0c4 0x3dc 0x924 0x4 0x1 +#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x0c8 0x3dc 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B 0x0c8 0x3dc 0x924 0x4 0x1 #define MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x0c8 0x3dc 0x000 0x5 0x0 #define MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC 0x0c8 0x3dc 0x8e4 0x6 0x0 #define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14 0x0c8 0x3dc 0x000 0x7 0x0 diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index cf7aeaf89e9c..1335b2e1bed4 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -13,6 +13,7 @@ cpu@0 { device_type = "cpu"; compatible = "marvell,feroceon"; + reg = <0>; clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>; clock-names = "cpu_clk", "ddrclk", "powersave"; }; @@ -167,7 +168,7 @@ xor@60900 { compatible = "marvell,orion-xor"; reg = <0x60900 0x100 - 0xd0B00 0x100>; + 0x60B00 0x100>; status = "okay"; clocks = <&gate_clk 16>; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index afdb16417d4e..0c514dc8460c 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -11,7 +11,7 @@ / { model = "TI OMAP3 BeagleBoard xM"; - compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3"; + compatible = "ti,omap3-beagle-xm", "ti,omap3-beagle", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index bc48b114eae6..2326d11462a5 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -48,6 +48,15 @@ >; }; + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + 0x10c (PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ + 0x10e (PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */ + 0x110 (PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */ + 0x112 (PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */ + >; + }; + mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ @@ -93,6 +102,11 @@ clock-frequency = <400000>; }; +&mcbsp2 { + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; +}; + &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index faa95b5b242e..814ab67c8c29 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -107,6 +107,19 @@ */ clock-frequency = <19200000>; }; + + /* regulator for wl12xx on sdio5 */ + wl12xx_vmmc: wl12xx_vmmc { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_gpio>; + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio2 11 0>; + startup-delay-us = <70000>; + enable-active-high; + }; }; &omap4_pmx_wkup { @@ -235,6 +248,33 @@ 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ >; }; + + /* + * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP + * REVISIT: Are the pull-ups needed for GPIO 48 and 49? + */ + wl12xx_gpio: pinmux_wl12xx_gpio { + pinctrl-single,pins = < + 0x26 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */ + 0x2c (PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 */ + 0x30 (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48 */ + 0x32 (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 */ + >; + }; + + /* wl12xx GPIO inputs and SDIO pins */ + wl12xx_pins: pinmux_wl12xx_pins { + pinctrl-single,pins = < + 0x38 (PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */ + 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ + 0x108 (PIN_OUTPUT | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ + 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ + 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ + 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */ + 0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ + >; + }; }; &i2c1 { @@ -314,8 +354,12 @@ }; &mmc5 { - ti,non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_pins>; + vmmc-supply = <&wl12xx_vmmc>; + non-removable; bus-width = <4>; + cap-power-off-card; }; &emif1 { diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 7951b4ea500a..4f78380ecdb8 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -140,6 +140,19 @@ "DMic", "Digital Mic", "Digital Mic", "Digital Mic1 Bias"; }; + + /* regulator for wl12xx on sdio5 */ + wl12xx_vmmc: wl12xx_vmmc { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_gpio>; + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio2 22 0>; + startup-delay-us = <70000>; + enable-active-high; + }; }; &omap4_pmx_wkup { @@ -295,6 +308,26 @@ 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ >; }; + + /* wl12xx GPIO output for WLAN_EN */ + wl12xx_gpio: pinmux_wl12xx_gpio { + pinctrl-single,pins = < + 0x3c (PIN_OUTPUT | MUX_MODE3) /* gpmc_nwp.gpio_54 */ + >; + }; + + /* wl12xx GPIO inputs and SDIO pins */ + wl12xx_pins: pinmux_wl12xx_pins { + pinctrl-single,pins = < + 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ + 0x108 (PIN_OUTPUT | MUX_MODE3) /* sdmmc5_clk.sdmmc5_clk */ + 0x10a (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_cmd.sdmmc5_cmd */ + 0x10c (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat0.sdmmc5_dat0 */ + 0x10e (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat1.sdmmc5_dat1 */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat2.sdmmc5_dat2 */ + 0x112 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat3.sdmmc5_dat3 */ + >; + }; }; &i2c1 { @@ -420,8 +453,12 @@ }; &mmc5 { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_pins>; + vmmc-supply = <&wl12xx_vmmc>; + non-removable; bus-width = <4>; - ti,non-removable; + cap-power-off-card; }; &emif1 { diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 07be2cd7b318..7cdea1bfea09 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -637,7 +637,7 @@ omap_dwc3@4a020000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss"; - reg = <0x4a020000 0x1000>; + reg = <0x4a020000 0x10000>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <1>; @@ -645,17 +645,18 @@ ranges; dwc3@4a030000 { compatible = "snps,dwc3"; - reg = <0x4a030000 0x1000>; + reg = <0x4a030000 0x10000>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; usb-phy = <&usb2_phy>, <&usb3_phy>; tx-fifo-resize; }; }; - ocp2scp { + ocp2scp@4a080000 { compatible = "ti,omap-ocp2scp"; #address-cells = <1>; #size-cells = <1>; + reg = <0x4a080000 0x20>; ranges; ti,hwmods = "ocp2scp1"; usb2_phy: usb2phy@4a084000 { diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index bbeb623fc2c6..27ed9f5144bc 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -171,7 +171,8 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0xb0000000 0xb0000000 0x180000>; + ranges = <0xb0000000 0xb0000000 0x180000>, + <0x56000000 0x56000000 0x1b00000>; timer@b0020000 { compatible = "sirf,prima2-tick"; @@ -196,25 +197,32 @@ uart0: uart@b0050000 { cell-index = <0>; compatible = "sirf,prima2-uart"; - reg = <0xb0050000 0x10000>; + reg = <0xb0050000 0x1000>; interrupts = <17>; + fifosize = <128>; clocks = <&clks 13>; + sirf,uart-dma-rx-channel = <21>; + sirf,uart-dma-tx-channel = <2>; }; uart1: uart@b0060000 { cell-index = <1>; compatible = "sirf,prima2-uart"; - reg = <0xb0060000 0x10000>; + reg = <0xb0060000 0x1000>; interrupts = <18>; + fifosize = <32>; clocks = <&clks 14>; }; uart2: uart@b0070000 { cell-index = <2>; compatible = "sirf,prima2-uart"; - reg = <0xb0070000 0x10000>; + reg = <0xb0070000 0x1000>; interrupts = <19>; + fifosize = <128>; clocks = <&clks 15>; + sirf,uart-dma-rx-channel = <6>; + sirf,uart-dma-tx-channel = <7>; }; usp0: usp@b0080000 { @@ -222,7 +230,10 @@ compatible = "sirf,prima2-usp"; reg = <0xb0080000 0x10000>; interrupts = <20>; + fifosize = <128>; clocks = <&clks 28>; + sirf,usp-dma-rx-channel = <17>; + sirf,usp-dma-tx-channel = <18>; }; usp1: usp@b0090000 { @@ -230,7 +241,10 @@ compatible = "sirf,prima2-usp"; reg = <0xb0090000 0x10000>; interrupts = <21>; + fifosize = <128>; clocks = <&clks 29>; + sirf,usp-dma-rx-channel = <14>; + sirf,usp-dma-tx-channel = <15>; }; usp2: usp@b00a0000 { @@ -238,7 +252,10 @@ compatible = "sirf,prima2-usp"; reg = <0xb00a0000 0x10000>; interrupts = <22>; + fifosize = <128>; clocks = <&clks 30>; + sirf,usp-dma-rx-channel = <10>; + sirf,usp-dma-tx-channel = <11>; }; dmac0: dma-controller@b00b0000 { @@ -261,6 +278,8 @@ compatible = "sirf,prima2-vip"; reg = <0xb00C0000 0x10000>; clocks = <&clks 31>; + interrupts = <14>; + sirf,vip-dma-rx-channel = <16>; }; spi0: spi@b00d0000 { diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 6c26caa880f2..658fcc537576 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -193,7 +193,7 @@ }; sdhi0: sdhi@ee100000 { - compatible = "renesas,r8a73a4-sdhi"; + compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee100000 0 0x100>; interrupt-parent = <&gic>; interrupts = <0 165 4>; @@ -202,7 +202,7 @@ }; sdhi1: sdhi@ee120000 { - compatible = "renesas,r8a73a4-sdhi"; + compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee120000 0 0x100>; interrupt-parent = <&gic>; interrupts = <0 166 4>; @@ -211,7 +211,7 @@ }; sdhi2: sdhi@ee140000 { - compatible = "renesas,r8a73a4-sdhi"; + compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee140000 0 0x100>; interrupt-parent = <&gic>; interrupts = <0 167 4>; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 45ac404ab6d8..3577aba82583 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -96,6 +96,5 @@ pfc: pfc@fffc0000 { compatible = "renesas,pfc-r8a7778"; reg = <0xfffc000 0x118>; - #gpio-range-cells = <3>; }; }; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 23a62447359c..ebbe507fcbfa 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -188,7 +188,6 @@ pfc: pfc@fffc0000 { compatible = "renesas,pfc-r8a7779"; reg = <0xfffc0000 0x23c>; - #gpio-range-cells = <3>; }; thermal@ffc48000 { diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 3b879e7c697c..413b4c29e782 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -148,11 +148,10 @@ pfc: pfc@e6060000 { compatible = "renesas,pfc-r8a7790"; reg = <0 0xe6060000 0 0x250>; - #gpio-range-cells = <3>; }; sdhi0: sdhi@ee100000 { - compatible = "renesas,r8a7790-sdhi"; + compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee100000 0 0x100>; interrupt-parent = <&gic>; interrupts = <0 165 4>; @@ -161,7 +160,7 @@ }; sdhi1: sdhi@ee120000 { - compatible = "renesas,r8a7790-sdhi"; + compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee120000 0 0x100>; interrupt-parent = <&gic>; interrupts = <0 166 4>; @@ -170,7 +169,7 @@ }; sdhi2: sdhi@ee140000 { - compatible = "renesas,r8a7790-sdhi"; + compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee140000 0 0x100>; interrupt-parent = <&gic>; interrupts = <0 167 4>; @@ -179,7 +178,7 @@ }; sdhi3: sdhi@ee160000 { - compatible = "renesas,r8a7790-sdhi"; + compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee160000 0 0x100>; interrupt-parent = <&gic>; interrupts = <0 168 4>; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index ba59a5875a10..3955c7606a6f 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -196,7 +196,7 @@ }; sdhi0: sdhi@ee100000 { - compatible = "renesas,r8a7740-sdhi"; + compatible = "renesas,sdhi-r8a7740"; reg = <0xee100000 0x100>; interrupt-parent = <&gic>; interrupts = <0 83 4 @@ -208,7 +208,7 @@ /* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */ sdhi1: sdhi@ee120000 { - compatible = "renesas,r8a7740-sdhi"; + compatible = "renesas,sdhi-r8a7740"; reg = <0xee120000 0x100>; interrupt-parent = <&gic>; interrupts = <0 88 4 @@ -219,7 +219,7 @@ }; sdhi2: sdhi@ee140000 { - compatible = "renesas,r8a7740-sdhi"; + compatible = "renesas,sdhi-r8a7740"; reg = <0xee140000 0x100>; interrupt-parent = <&gic>; interrupts = <0 104 4 diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c index 117f955a2a06..8e1a0245907f 100644 --- a/arch/arm/common/edma.c +++ b/arch/arm/common/edma.c @@ -269,6 +269,11 @@ static const struct edmacc_param dummy_paramset = { .ccnt = 1, }; +static const struct of_device_id edma_of_ids[] = { + { .compatible = "ti,edma3", }, + {} +}; + /*****************************************************************************/ static void map_dmach_queue(unsigned ctlr, unsigned ch_no, @@ -560,14 +565,38 @@ static int reserve_contiguous_slots(int ctlr, unsigned int id, static int prepare_unused_channel_list(struct device *dev, void *data) { struct platform_device *pdev = to_platform_device(dev); - int i, ctlr; + int i, count, ctlr; + struct of_phandle_args dma_spec; + if (dev->of_node) { + count = of_property_count_strings(dev->of_node, "dma-names"); + if (count < 0) + return 0; + for (i = 0; i < count; i++) { + if (of_parse_phandle_with_args(dev->of_node, "dmas", + "#dma-cells", i, + &dma_spec)) + continue; + + if (!of_match_node(edma_of_ids, dma_spec.np)) { + of_node_put(dma_spec.np); + continue; + } + + clear_bit(EDMA_CHAN_SLOT(dma_spec.args[0]), + edma_cc[0]->edma_unused); + of_node_put(dma_spec.np); + } + return 0; + } + + /* For non-OF case */ for (i = 0; i < pdev->num_resources; i++) { if ((pdev->resource[i].flags & IORESOURCE_DMA) && (int)pdev->resource[i].start >= 0) { ctlr = EDMA_CTLR(pdev->resource[i].start); clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start), - edma_cc[ctlr]->edma_unused); + edma_cc[ctlr]->edma_unused); } } @@ -1762,11 +1791,6 @@ static int edma_probe(struct platform_device *pdev) return 0; } -static const struct of_device_id edma_of_ids[] = { - { .compatible = "ti,edma3", }, - {} -}; - static struct platform_driver edma_driver = { .driver = { .name = "edma", diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 6e572c64cf5a..119fc378fc52 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -36,6 +36,7 @@ CONFIG_ARCH_TEGRA_114_SOC=y CONFIG_TEGRA_PCI=y CONFIG_TEGRA_EMC_SCALING_ENABLE=y CONFIG_ARCH_U8500=y +CONFIG_MACH_HREFV60=y CONFIG_MACH_SNOWBALL=y CONFIG_MACH_UX500_DT=y CONFIG_ARCH_VEXPRESS=y @@ -46,6 +47,7 @@ CONFIG_ARCH_ZYNQ=y CONFIG_SMP=y CONFIG_HIGHPTE=y CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_NET=y CONFIG_UNIX=y CONFIG_INET=y @@ -133,6 +135,7 @@ CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_MMC_SDHCI_TEGRA=y CONFIG_MMC_SDHCI_SPEAR=y CONFIG_MMC_OMAP=y diff --git a/arch/arm/crypto/aes-armv4.S b/arch/arm/crypto/aes-armv4.S index 19d6cd6f29f9..3a14ea8fe97e 100644 --- a/arch/arm/crypto/aes-armv4.S +++ b/arch/arm/crypto/aes-armv4.S @@ -148,7 +148,7 @@ AES_Te: @ const AES_KEY *key) { .align 5 ENTRY(AES_encrypt) - sub r3,pc,#8 @ AES_encrypt + adr r3,AES_encrypt stmdb sp!,{r1,r4-r12,lr} mov r12,r0 @ inp mov r11,r2 @@ -381,7 +381,7 @@ _armv4_AES_encrypt: .align 5 ENTRY(private_AES_set_encrypt_key) _armv4_AES_set_encrypt_key: - sub r3,pc,#8 @ AES_set_encrypt_key + adr r3,_armv4_AES_set_encrypt_key teq r0,#0 moveq r0,#-1 beq .Labrt @@ -843,7 +843,7 @@ AES_Td: @ const AES_KEY *key) { .align 5 ENTRY(AES_decrypt) - sub r3,pc,#8 @ AES_decrypt + adr r3,AES_decrypt stmdb sp!,{r1,r4-r12,lr} mov r12,r0 @ inp mov r11,r2 diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 7e1f76027f66..72abdc541f38 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -19,6 +19,13 @@ #include <asm/unified.h> #include <asm/compiler.h> +#if __LINUX_ARM_ARCH__ < 6 +#include <asm-generic/uaccess-unaligned.h> +#else +#define __get_user_unaligned __get_user +#define __put_user_unaligned __put_user +#endif + #define VERIFY_READ 0 #define VERIFY_WRITE 1 diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 74ad15d1a065..bc6bd9683ba4 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -442,10 +442,10 @@ local_restart: ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine add r1, sp, #S_OFF - cmp scno, #(__ARM_NR_BASE - __NR_SYSCALL_BASE) +2: cmp scno, #(__ARM_NR_BASE - __NR_SYSCALL_BASE) eor r0, scno, #__NR_SYSCALL_BASE @ put OS number back bcs arm_syscall -2: mov why, #0 @ no longer a real syscall + mov why, #0 @ no longer a real syscall b sys_ni_syscall @ not private func #if defined(CONFIG_OABI_COMPAT) || !defined(CONFIG_AEABI) diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index de23a9beed13..39f89fbd5111 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -329,10 +329,10 @@ #ifdef CONFIG_CONTEXT_TRACKING .if \save stmdb sp!, {r0-r3, ip, lr} - bl user_exit + bl context_tracking_user_exit ldmia sp!, {r0-r3, ip, lr} .else - bl user_exit + bl context_tracking_user_exit .endif #endif .endm @@ -341,10 +341,10 @@ #ifdef CONFIG_CONTEXT_TRACKING .if \save stmdb sp!, {r0-r3, ip, lr} - bl user_enter + bl context_tracking_user_enter ldmia sp!, {r0-r3, ip, lr} .else - bl user_enter + bl context_tracking_user_enter .endif #endif .endm diff --git a/arch/arm/kvm/reset.c b/arch/arm/kvm/reset.c index 71e08baee209..c02ba4af599f 100644 --- a/arch/arm/kvm/reset.c +++ b/arch/arm/kvm/reset.c @@ -58,14 +58,14 @@ static const struct kvm_irq_level a15_vtimer_irq = { */ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) { - struct kvm_regs *cpu_reset; + struct kvm_regs *reset_regs; const struct kvm_irq_level *cpu_vtimer_irq; switch (vcpu->arch.target) { case KVM_ARM_TARGET_CORTEX_A15: if (vcpu->vcpu_id > a15_max_cpu_idx) return -EINVAL; - cpu_reset = &a15_regs_reset; + reset_regs = &a15_regs_reset; vcpu->arch.midr = read_cpuid_id(); cpu_vtimer_irq = &a15_vtimer_irq; break; @@ -74,7 +74,7 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) } /* Reset core registers */ - memcpy(&vcpu->arch.regs, cpu_reset, sizeof(vcpu->arch.regs)); + memcpy(&vcpu->arch.regs, reset_regs, sizeof(vcpu->arch.regs)); /* Reset CP15 registers */ kvm_reset_coprocs(vcpu); diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 180b3024bec3..f607deb40f4d 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -93,7 +93,7 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id) static struct irqaction at91rm9200_timer_irq = { .name = "at91_tick", - .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL, .handler = at91rm9200_timer_interrupt, .irq = NR_IRQS_LEGACY + AT91_ID_SYS, }; diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index 3a4bc2e1a65e..bb392320a0dd 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -171,7 +171,7 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id) static struct irqaction at91sam926x_pit_irq = { .name = "at91_tick", - .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .flags = IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL, .handler = at91sam926x_pit_interrupt, .irq = NR_IRQS_LEGACY + AT91_ID_SYS, }; diff --git a/arch/arm/mach-at91/at91sam9g45_reset.S b/arch/arm/mach-at91/at91sam9g45_reset.S index 721a1a34dd1d..c40c1e2ef80f 100644 --- a/arch/arm/mach-at91/at91sam9g45_reset.S +++ b/arch/arm/mach-at91/at91sam9g45_reset.S @@ -16,11 +16,17 @@ #include "at91_rstc.h" .arm +/* + * at91_ramc_base is an array void* + * init at NULL if only one DDR controler is present in or DT + */ .globl at91sam9g45_restart at91sam9g45_restart: ldr r5, =at91_ramc_base @ preload constants ldr r0, [r5] + ldr r5, [r5, #4] @ ddr1 + cmp r5, #0 ldr r4, =at91_rstc_base ldr r1, [r4] @@ -30,6 +36,8 @@ at91sam9g45_restart: .balign 32 @ align to cache line + strne r2, [r5, #AT91_DDRSDRC_RTR] @ disable DDR1 access + strne r3, [r5, #AT91_DDRSDRC_LPR] @ power down DDR1 str r2, [r0, #AT91_DDRSDRC_RTR] @ disable DDR0 access str r3, [r0, #AT91_DDRSDRC_LPR] @ power down DDR0 str r4, [r1, #AT91_RSTC_CR] @ reset processor diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c index 2919eba41ff4..c0e637adf65d 100644 --- a/arch/arm/mach-at91/at91x40_time.c +++ b/arch/arm/mach-at91/at91x40_time.c @@ -57,7 +57,7 @@ static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id) static struct irqaction at91x40_timer_irq = { .name = "at91_tick", - .flags = IRQF_DISABLED | IRQF_TIMER, + .flags = IRQF_TIMER, .handler = at91x40_timer_interrupt }; diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 92b7f770615a..4078ba93776b 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -176,7 +176,7 @@ static struct at24_platform_data eeprom_info = { .context = (void *)0x7f00, }; -static struct snd_platform_data dm365_evm_snd_data = { +static struct snd_platform_data dm365_evm_snd_data __maybe_unused = { .asp_chan_q = EVENTQ_3, }; diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index 52b8571b2e70..ce402cd21fa0 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -15,8 +15,6 @@ #include <mach/hardware.h> -#include <linux/platform_device.h> - #define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) #define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) #define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) @@ -39,6 +37,8 @@ #define UART_DM646X_SCR_TX_WATERMARK 0x08 #ifndef __ASSEMBLY__ +#include <linux/platform_device.h> + extern int davinci_serial_init(struct platform_device *); #endif diff --git a/arch/arm/mach-imx/clk-fixup-mux.c b/arch/arm/mach-imx/clk-fixup-mux.c index deb4b8093b30..0d40b35c557c 100644 --- a/arch/arm/mach-imx/clk-fixup-mux.c +++ b/arch/arm/mach-imx/clk-fixup-mux.c @@ -90,6 +90,7 @@ struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg, init.ops = &clk_fixup_mux_ops; init.parent_names = parents; init.num_parents = num_parents; + init.flags = 0; fixup_mux->mux.reg = reg; fixup_mux->mux.shift = shift; diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index c3cfa4116dc0..c6b40f386786 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -285,7 +285,7 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL); clk_register_clkdev(clk[rtc_ipg_gate], NULL, "imx21-rtc"); clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL); - clk_register_clkdev(clk[cpu_div], NULL, "cpufreq-cpu0.0"); + clk_register_clkdev(clk[cpu_div], NULL, "cpu0"); clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL); mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1); diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 1a56a3319997..7c0dc4540aa4 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -328,7 +328,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1"); clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "imx-ssi.2"); clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma"); - clk_register_clkdev(clk[cpu_podf], NULL, "cpufreq-cpu0.0"); + clk_register_clkdev(clk[cpu_podf], NULL, "cpu0"); clk_register_clkdev(clk[iim_gate], "iim", NULL); clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.0"); clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.1"); @@ -397,7 +397,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, mx51_spdif_xtal_sel, ARRAY_SIZE(mx51_spdif_xtal_sel)); clk[spdif1_sel] = imx_clk_mux("spdif1_sel", MXC_CCM_CSCMR2, 2, 2, spdif_sel, ARRAY_SIZE(spdif_sel)); - clk[spdif1_pred] = imx_clk_divider("spdif1_podf", "spdif1_sel", MXC_CCM_CDCDR, 16, 3); + clk[spdif1_pred] = imx_clk_divider("spdif1_pred", "spdif1_sel", MXC_CCM_CDCDR, 16, 3); clk[spdif1_podf] = imx_clk_divider("spdif1_podf", "spdif1_pred", MXC_CCM_CDCDR, 9, 6); clk[spdif1_com_sel] = imx_clk_mux("spdif1_com_sel", MXC_CCM_CSCMR2, 5, 1, mx51_spdif1_com_sel, ARRAY_SIZE(mx51_spdif1_com_sel)); diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 85a1b51346c8..90372a21087f 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -233,10 +233,15 @@ put_node: of_node_put(np); } -static void __init imx6q_opp_init(struct device *cpu_dev) +static void __init imx6q_opp_init(void) { struct device_node *np; + struct device *cpu_dev = get_cpu_device(0); + if (!cpu_dev) { + pr_warn("failed to get cpu0 device\n"); + return; + } np = of_node_get(cpu_dev->of_node); if (!np) { pr_warn("failed to find cpu0 node\n"); @@ -268,7 +273,7 @@ static void __init imx6q_init_late(void) imx6q_cpuidle_init(); if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) { - imx6q_opp_init(&imx6q_cpufreq_pdev.dev); + imx6q_opp_init(); platform_device_register(&imx6q_cpufreq_pdev); } } diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c index 64ff37ea72b1..80c177c36c5f 100644 --- a/arch/arm/mach-imx/system.c +++ b/arch/arm/mach-imx/system.c @@ -117,6 +117,17 @@ void __init imx_init_l2cache(void) /* Configure the L2 PREFETCH and POWER registers */ val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL); val |= 0x70800000; + /* + * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0 + * The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2 + * But according to ARM PL310 errata: 752271 + * ID: 752271: Double linefill feature can cause data corruption + * Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2 + * Workaround: The only workaround to this erratum is to disable the + * double linefill feature. This is the default behavior. + */ + if (cpu_is_imx6q()) + val &= ~(1 << 30 | 1 << 23); writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL); val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN; writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL); diff --git a/arch/arm/mach-integrator/pci_v3.h b/arch/arm/mach-integrator/pci_v3.h index 755fd29fed4a..06a9e2e7d007 100644 --- a/arch/arm/mach-integrator/pci_v3.h +++ b/arch/arm/mach-integrator/pci_v3.h @@ -1,2 +1,9 @@ /* Simple oneliner include to the PCIv3 early init */ +#ifdef CONFIG_PCI extern int pci_v3_early_init(void); +#else +static inline int pci_v3_early_init(void) +{ + return 0; +} +#endif diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c index 4c24303ec481..58adf2fd9cfc 100644 --- a/arch/arm/mach-mvebu/coherency.c +++ b/arch/arm/mach-mvebu/coherency.c @@ -140,6 +140,7 @@ int __init coherency_init(void) coherency_base = of_iomap(np, 0); coherency_cpu_base = of_iomap(np, 1); set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0); + of_node_put(np); } return 0; @@ -147,9 +148,14 @@ int __init coherency_init(void) static int __init coherency_late_init(void) { - if (of_find_matching_node(NULL, of_coherency_table)) + struct device_node *np; + + np = of_find_matching_node(NULL, of_coherency_table); + if (np) { bus_register_notifier(&platform_bus_type, &mvebu_hwcc_platform_nb); + of_node_put(np); + } return 0; } diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index 3cc4bef6401c..27fc4f049474 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -67,6 +67,7 @@ int __init armada_370_xp_pmsu_init(void) pr_info("Initializing Power Management Service Unit\n"); pmsu_mp_base = of_iomap(np, 0); pmsu_reset_base = of_iomap(np, 1); + of_node_put(np); } return 0; diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c index f875124ff4f9..5175083cdb34 100644 --- a/arch/arm/mach-mvebu/system-controller.c +++ b/arch/arm/mach-mvebu/system-controller.c @@ -98,6 +98,7 @@ static int __init mvebu_system_controller_init(void) BUG_ON(!match); system_controller_base = of_iomap(np, 0); mvebu_sc = (struct mvebu_system_controller *)match->data; + of_node_put(np); } return 0; diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c index 1d5b5290d2af..b237950eb8a3 100644 --- a/arch/arm/mach-omap2/cclock44xx_data.c +++ b/arch/arm/mach-omap2/cclock44xx_data.c @@ -1632,7 +1632,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "auxclk5_src_ck", &auxclk5_src_ck), CLK(NULL, "auxclk5_ck", &auxclk5_ck), CLK(NULL, "auxclkreq5_ck", &auxclkreq5_ck), - CLK("omap-gpmc", "fck", &dummy_ck), + CLK("50000000.gpmc", "fck", &dummy_ck), CLK("omap_i2c.1", "ick", &dummy_ck), CLK("omap_i2c.2", "ick", &dummy_ck), CLK("omap_i2c.3", "ick", &dummy_ck), diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index c443f2e97e10..4c8982ae9529 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -143,7 +143,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev, * Call idle CPU cluster PM exit notifier chain * to restore GIC and wakeupgen context. */ - if ((cx->mpu_state == PWRDM_POWER_RET) && + if (dev->cpu == 0 && (cx->mpu_state == PWRDM_POWER_RET) && (cx->mpu_logic_state == PWRDM_POWER_OFF)) cpu_cluster_pm_exit(); diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 9f4795aff48a..579697adaae7 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1491,8 +1491,8 @@ static int gpmc_probe_generic_child(struct platform_device *pdev, */ ret = gpmc_cs_remap(cs, res.start); if (ret < 0) { - dev_err(&pdev->dev, "cannot remap GPMC CS %d to 0x%x\n", - cs, res.start); + dev_err(&pdev->dev, "cannot remap GPMC CS %d to %pa\n", + cs, &res.start); goto err; } diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c index c53609f46294..be271f1d585b 100644 --- a/arch/arm/mach-omap2/mux34xx.c +++ b/arch/arm/mach-omap2/mux34xx.c @@ -620,7 +620,7 @@ static struct omap_mux __initdata omap3_muxmodes[] = { "uart1_rts", "ssi1_flag_tx", NULL, NULL, "gpio_149", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_RX, 151, - "uart1_rx", "ss1_wake_tx", "mcbsp1_clkr", "mcspi4_clk", + "uart1_rx", "ssi1_wake_tx", "mcbsp1_clkr", "mcspi4_clk", "gpio_151", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_TX, 148, "uart1_tx", "ssi1_dat_tx", NULL, NULL, diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 8708b2a9da45..891211093295 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -1,5 +1,5 @@ /* - * OMAP4 SMP source file. It contains platform specific fucntions + * OMAP4 SMP source file. It contains platform specific functions * needed for the linux smp kernel. * * Copyright (C) 2009 Texas Instruments, Inc. diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index f99f68e1e85b..b69dd9abb50a 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -158,7 +158,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev) } od = omap_device_alloc(pdev, hwmods, oh_cnt); - if (!od) { + if (IS_ERR(od)) { dev_err(&pdev->dev, "Cannot allocate omap_device for :%s\n", oh_name); ret = PTR_ERR(od); diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 612a45689770..7fb96ebdc0fb 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -289,7 +289,7 @@ static void collie_flash_exit(void) } static struct flash_platform_data collie_flash_data = { - .map_name = "cfi_probe", + .map_name = "jedec_probe", .init = collie_flash_init, .set_vpp = collie_set_vpp, .exit = collie_flash_exit, diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 5bd1479d3deb..7f8f6076d360 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -1108,9 +1108,9 @@ static const struct pinctrl_map eva_pinctrl_map[] = { PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-r8a7740", "fsib_mclk_in", "fsib"), /* GETHER */ - PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740", + PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740", "gether_mii", "gether"), - PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740", + PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740", "gether_int", "gether"), /* HDMI */ PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-r8a7740", diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index ffb6f0ac7606..5930af8d434f 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -29,6 +29,7 @@ #include <linux/pinctrl/machine.h> #include <linux/platform_data/gpio-rcar.h> #include <linux/platform_device.h> +#include <linux/phy.h> #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/sh_eth.h> @@ -155,6 +156,30 @@ static void __init lager_add_standard_devices(void) ðer_pdata, sizeof(ether_pdata)); } +/* + * Ether LEDs on the Lager board are named LINK and ACTIVE which corresponds + * to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits + * 14-15. We have to set them back to 01 from the default 00 value each time + * the PHY is reset. It's also important because the PHY's LED0 signal is + * connected to SoC's ETH_LINK signal and in the PHY's default mode it will + * bounce on and off after each packet, which we apparently want to avoid. + */ +static int lager_ksz8041_fixup(struct phy_device *phydev) +{ + u16 phyctrl1 = phy_read(phydev, 0x1e); + + phyctrl1 &= ~0xc000; + phyctrl1 |= 0x4000; + return phy_write(phydev, 0x1e, phyctrl1); +} + +static void __init lager_init(void) +{ + lager_add_standard_devices(); + + phy_register_fixup_for_id("r8a7790-ether-ff:01", lager_ksz8041_fixup); +} + static const char *lager_boards_compat_dt[] __initdata = { "renesas,lager", NULL, @@ -163,6 +188,6 @@ static const char *lager_boards_compat_dt[] __initdata = { DT_MACHINE_START(LAGER_DT, "lager") .init_early = r8a7790_init_delay, .init_time = r8a7790_timer_init, - .init_machine = lager_add_standard_devices, + .init_machine = lager_init, .dt_compat = lager_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c index 8ea5ef6c79cc..5bd2e851e3c7 100644 --- a/arch/arm/mach-shmobile/clock-r8a73a4.c +++ b/arch/arm/mach-shmobile/clock-r8a73a4.c @@ -555,7 +555,7 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("pll2h", &pll2h_clk), /* CPU clock */ - CLKDEV_DEV_ID("cpufreq-cpu0", &z_clk), + CLKDEV_DEV_ID("cpu0", &z_clk), /* DIV6 */ CLKDEV_CON_ID("zb", &div6_clks[DIV6_ZB]), diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 1942eaef5181..c92c023f0d27 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -616,7 +616,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("smp_twd", &twd_clk), /* smp_twd */ /* DIV4 clocks */ - CLKDEV_DEV_ID("cpufreq-cpu0", &div4_clks[DIV4_Z]), + CLKDEV_DEV_ID("cpu0", &div4_clks[DIV4_Z]), /* DIV6 clocks */ CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]), diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index a85adcd00882..a1659863bfd5 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -1,7 +1,3 @@ -menu "ST-Ericsson AB U300/U335 Platform" - -comment "ST-Ericsson Mobile Platform Products" - config ARCH_U300 bool "ST-Ericsson U300 Series" if ARCH_MULTI_V5 depends on MMU @@ -25,7 +21,9 @@ config ARCH_U300 help Support for ST-Ericsson U300 series mobile platforms. -comment "ST-Ericsson U300/U335 Feature Selections" +if ARCH_U300 + +menu "ST-Ericsson AB U300/U335 Platform" config MACH_U300 depends on ARCH_U300 @@ -53,3 +51,5 @@ config MACH_U300_SPIDUMMY SPI framework and ARM PL022 support. endmenu + +endif diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index 82ccf1d98735..264f894c0e3d 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -69,6 +69,7 @@ static int __init ux500_l2x0_init(void) * some SMI service available. */ outer_cache.disable = NULL; + outer_cache.set_debug = NULL; return 0; } diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c index 7aeb5d60e484..e6eb48192912 100644 --- a/arch/arm/mach-vexpress/tc2_pm.c +++ b/arch/arm/mach-vexpress/tc2_pm.c @@ -131,6 +131,16 @@ static void tc2_pm_down(u64 residency) } else BUG(); + /* + * If the CPU is committed to power down, make sure + * the power controller will be in charge of waking it + * up upon IRQ, ie IRQ lines are cut from GIC CPU IF + * to the CPU by disabling the GIC CPU IF to prevent wfi + * from completing execution behind power controller back + */ + if (!skip_wfi) + gic_cpu_if_down(); + if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { arch_spin_unlock(&tc2_pm_lock); @@ -231,7 +241,6 @@ static void tc2_pm_suspend(u64 residency) cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); ve_spc_set_resume_addr(cluster, cpu, virt_to_phys(mcpm_entry_point)); - gic_cpu_if_down(); tc2_pm_down(residency); } |