diff options
Diffstat (limited to 'arch/arm')
35 files changed, 102 insertions, 186 deletions
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index 18f70b35da4c..204bccfcc110 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -432,7 +432,7 @@ pinctrl-0 = <&mmc0_pins_default>; }; -&gpio0 { +&gpio0_target { /* Do not idle the GPIO used for holding the VTT regulator */ ti,no-reset-on-init; ti,no-idle-on-init; diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 9915c891e05f..7a9eb2b0d45b 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -127,7 +127,7 @@ ranges = <0x0 0x5000 0x1000>; }; - target-module@7000 { /* 0x44e07000, ap 14 20.0 */ + gpio0_target: target-module@7000 { /* 0x44e07000, ap 14 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; ti,hwmods = "gpio1"; reg = <0x7000 0x4>, @@ -2038,7 +2038,9 @@ reg = <0xe000 0x4>, <0xe054 0x4>; reg-names = "rev", "sysc"; - ti,sysc-midle ; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; ti,sysc-sidle = <SYSC_IDLE_FORCE>, <SYSC_IDLE_NO>, <SYSC_IDLE_SMART>; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 848e2a8884e2..14bbc438055f 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -337,6 +337,8 @@ ti,hwmods = "dss_dispc"; clocks = <&disp_clk>; clock-names = "fck"; + + max-memory-bandwidth = <230000000>; }; rfbi: rfbi@4832a800 { diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index ea0e7c19eb4e..5cac2dd58241 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -2732,7 +2732,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>; dma-names = "tx", "rx"; - clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 22>, + clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 0>, <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>, <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>; clock-names = "fck", "ahclkx", "ahclkr"; @@ -2768,8 +2768,8 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 22>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 24>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 0>, + <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>, <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>; clock-names = "fck", "ahclkx", "ahclkr"; status = "disabled"; @@ -2786,9 +2786,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x68000 0x2000>, @@ -2804,7 +2803,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2821,9 +2820,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x6c000 0x2000>, @@ -2839,7 +2837,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2856,9 +2854,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x70000 0x2000>, @@ -2874,7 +2871,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2891,9 +2888,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x74000 0x2000>, @@ -2909,7 +2905,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2926,9 +2922,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x78000 0x2000>, @@ -2944,7 +2939,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2961,9 +2956,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x7c000 0x2000>, @@ -2979,7 +2973,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts index 3621b7d2b22a..9980c10c6e29 100644 --- a/arch/arm/boot/dts/mt7629-rfb.dts +++ b/arch/arm/boot/dts/mt7629-rfb.dts @@ -66,9 +66,21 @@ pinctrl-1 = <&ephy_leds_pins>; status = "okay"; + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + gmac1: mac@1 { compatible = "mediatek,eth-mac"; reg = <1>; + phy-mode = "gmii"; phy-handle = <&phy0>; }; @@ -78,7 +90,6 @@ phy0: ethernet-phy@0 { reg = <0>; - phy-mode = "gmii"; }; }; }; diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi index 9608bc2ccb3f..867b88103b9d 100644 --- a/arch/arm/boot/dts/mt7629.dtsi +++ b/arch/arm/boot/dts/mt7629.dtsi @@ -468,14 +468,12 @@ compatible = "mediatek,mt7629-sgmiisys", "syscon"; reg = <0x1b128000 0x3000>; #clock-cells = <1>; - mediatek,physpeed = "2500"; }; sgmiisys1: syscon@1b130000 { compatible = "mediatek,mt7629-sgmiisys", "syscon"; reg = <0x1b130000 0x3000>; #clock-cells = <1>; - mediatek,physpeed = "2500"; }; }; }; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index d01fc8744fd7..b6ef1a7ac8a4 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -124,6 +124,7 @@ spi-max-frequency = <100000>; spi-cpol; spi-cpha; + spi-cs-high; backlight= <&backlight>; label = "lcd"; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index a53657b83288..bda454d12150 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/mfd/dbx500-prcmu.h> #include <dt-bindings/arm/ux500_pm_domains.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/thermal/thermal.h> / { #address-cells = <1>; @@ -59,8 +60,12 @@ * cooling. */ cpu_thermal: cpu-thermal { - polling-delay-passive = <0>; - polling-delay = <1000>; + polling-delay-passive = <250>; + /* + * This sensor fires interrupts to update the thermal + * zone, so no polling is needed. + */ + polling-delay = <0>; thermal-sensors = <&thermal>; @@ -79,7 +84,7 @@ cooling-maps { trip = <&cpu_alert>; - cooling-device = <&CPU0 0 2>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; contribution = <100>; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index ce823c44e98a..4c268b70b735 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -520,6 +520,7 @@ interrupts = <39>; clocks = <&ccu CLK_AHB_EHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -529,6 +530,7 @@ interrupts = <64>; clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -608,6 +610,7 @@ interrupts = <40>; clocks = <&ccu CLK_AHB_EHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -617,6 +620,7 @@ interrupts = <65>; clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index cfb1efc8828c..6befa236ba99 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -391,6 +391,7 @@ interrupts = <39>; clocks = <&ccu CLK_AHB_EHCI>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -400,6 +401,7 @@ interrupts = <40>; clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index bbeb743633c6..ac7638078420 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -545,6 +545,7 @@ clocks = <&ccu CLK_AHB1_EHCI0>; resets = <&ccu RST_AHB1_EHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -555,6 +556,7 @@ clocks = <&ccu CLK_AHB1_OHCI0>, <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_AHB1_OHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -565,6 +567,7 @@ clocks = <&ccu CLK_AHB1_EHCI1>; resets = <&ccu RST_AHB1_EHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -575,6 +578,7 @@ clocks = <&ccu CLK_AHB1_OHCI1>, <&ccu CLK_USB_OHCI1>; resets = <&ccu RST_AHB1_OHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 49380de754a9..874231be04e4 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -623,6 +623,7 @@ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_AHB_EHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -632,6 +633,7 @@ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -714,6 +716,7 @@ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_AHB_EHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -723,6 +726,7 @@ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 52eed0ae3607..f292f96ab39b 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -307,6 +307,7 @@ clocks = <&ccu CLK_BUS_EHCI>; resets = <&ccu RST_BUS_EHCI>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -317,6 +318,7 @@ clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>; resets = <&ccu RST_BUS_OHCI>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 523be6611c50..74bb053cf23c 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -632,6 +632,7 @@ clocks = <&ccu CLK_BUS_EHCI0>; resets = <&ccu RST_BUS_EHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -643,6 +644,7 @@ clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_BUS_OHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -654,6 +656,7 @@ clocks = <&ccu CLK_BUS_EHCI1>; resets = <&ccu RST_BUS_EHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index bde068111b85..c9c2688db66d 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -273,6 +273,7 @@ clocks = <&ccu CLK_BUS_EHCI1>; resets = <&ccu RST_BUS_EHCI1>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -284,6 +285,7 @@ <&ccu CLK_USB_OHCI1>; resets = <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -294,6 +296,7 @@ clocks = <&ccu CLK_BUS_EHCI2>; resets = <&ccu RST_BUS_EHCI2>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -305,6 +308,7 @@ <&ccu CLK_USB_OHCI2>; resets = <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index c34d505c7efe..b9b6fb00be28 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -346,6 +346,7 @@ clocks = <&usb_clocks CLK_BUS_HCI0>; resets = <&usb_clocks RST_USB0_HCI>; phys = <&usbphy1>; + phy-names = "usb"; status = "disabled"; }; @@ -357,6 +358,7 @@ <&usb_clocks CLK_USB_OHCI0>; resets = <&usb_clocks RST_USB0_HCI>; phys = <&usbphy1>; + phy-names = "usb"; status = "disabled"; }; @@ -378,6 +380,7 @@ clocks = <&usb_clocks CLK_BUS_HCI1>; resets = <&usb_clocks RST_USB1_HCI>; phys = <&usbphy2>; + phy-names = "usb"; status = "disabled"; }; @@ -407,6 +410,7 @@ clocks = <&usb_clocks CLK_BUS_HCI2>; resets = <&usb_clocks RST_USB2_HCI>; phys = <&usbphy3>; + phy-names = "usb"; status = "disabled"; }; @@ -418,6 +422,7 @@ <&usb_clocks CLK_USB_OHCI2>; resets = <&usb_clocks RST_USB2_HCI>; phys = <&usbphy3>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index eba190b3f9de..107eeafad20a 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -304,6 +304,7 @@ clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>; resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -315,6 +316,7 @@ <&ccu CLK_USB_OHCI1>; resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -325,6 +327,7 @@ clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>; resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -336,6 +339,7 @@ <&ccu CLK_USB_OHCI2>; resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -346,6 +350,7 @@ clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>; resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; phys = <&usbphy 3>; + phy-names = "usb"; status = "disabled"; }; @@ -357,6 +362,7 @@ <&ccu CLK_USB_OHCI3>; resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; phys = <&usbphy 3>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig index 5ae5b5228467..ef484c4cfd1a 100644 --- a/arch/arm/configs/badge4_defconfig +++ b/arch/arm/configs/badge4_defconfig @@ -91,7 +91,6 @@ CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_SERIAL_CYBERJACK=m CONFIG_USB_SERIAL_XIRCOM=m CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_RIO500=m CONFIG_EXT2_FS=m CONFIG_EXT3_FS=m CONFIG_MSDOS_FS=y diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index e4f6442588e7..4fec2ec379ad 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -195,7 +195,6 @@ CONFIG_USB_SERIAL_XIRCOM=m CONFIG_USB_SERIAL_OMNINET=m CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m -CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m CONFIG_USB_CYTHERM=m diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index b34970ce6b31..01e3c0f4be92 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -228,7 +228,7 @@ CONFIG_RTC_DRV_OMAP=m CONFIG_DMADEVICES=y CONFIG_TI_EDMA=y CONFIG_COMMON_CLK_PWM=m -CONFIG_REMOTEPROC=m +CONFIG_REMOTEPROC=y CONFIG_DA8XX_REMOTEPROC=m CONFIG_MEMORY=y CONFIG_TI_AEMIF=m diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 13ba53286901..e4c8def9a0a5 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -415,7 +415,7 @@ CONFIG_SPI_SH_MSIOF=m CONFIG_SPI_SH_HSPI=y CONFIG_SPI_SIRF=y CONFIG_SPI_STM32=m -CONFIG_SPI_STM32_QSPI=m +CONFIG_SPI_STM32_QSPI=y CONFIG_SPI_SUN4I=y CONFIG_SPI_SUN6I=y CONFIG_SPI_TEGRA114=y @@ -933,7 +933,7 @@ CONFIG_BCM2835_MBOX=y CONFIG_ROCKCHIP_IOMMU=y CONFIG_TEGRA_IOMMU_GART=y CONFIG_TEGRA_IOMMU_SMMU=y -CONFIG_REMOTEPROC=m +CONFIG_REMOTEPROC=y CONFIG_ST_REMOTEPROC=m CONFIG_RPMSG_VIRTIO=m CONFIG_ASPEED_LPC_CTRL=m diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 64eb896907bf..d3f50971e451 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -364,6 +364,7 @@ CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1=m CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11=m CONFIG_DRM_TILCDC=m CONFIG_DRM_PANEL_SIMPLE=m +CONFIG_DRM_TI_TFP410=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y @@ -423,6 +424,7 @@ CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_SIMPLE=m CONFIG_USB_SERIAL_FTDI_SIO=m CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_OPTION=m CONFIG_USB_TEST=m CONFIG_NOP_USB_XCEIV=m CONFIG_AM335X_PHY_USB=m @@ -460,6 +462,7 @@ CONFIG_MMC_SDHCI_OMAP=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m CONFIG_LEDS_CPCAP=m +CONFIG_LEDS_LM3532=m CONFIG_LEDS_GPIO=m CONFIG_LEDS_PCA963X=m CONFIG_LEDS_PWM=m @@ -481,7 +484,7 @@ CONFIG_RTC_DRV_OMAP=m CONFIG_RTC_DRV_CPCAP=m CONFIG_DMADEVICES=y CONFIG_OMAP_IOMMU=y -CONFIG_REMOTEPROC=m +CONFIG_REMOTEPROC=y CONFIG_OMAP_REMOTEPROC=m CONFIG_WKUP_M3_RPROC=m CONFIG_SOC_TI=y diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index 787c3f9be414..b817c57f05f1 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -581,7 +581,6 @@ CONFIG_USB_SERIAL_XIRCOM=m CONFIG_USB_SERIAL_OMNINET=m CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m -CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m CONFIG_USB_CYTHERM=m diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 95b5a4ffddea..73ed73a8785a 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -327,7 +327,6 @@ CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m CONFIG_USB_ADUTUX=m CONFIG_USB_SEVSEG=m -CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m CONFIG_USB_CYPRESS_CY7C63=m diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index 4fb51d665abb..a1cdbfa064c5 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -189,7 +189,6 @@ CONFIG_USB_SERIAL_XIRCOM=m CONFIG_USB_SERIAL_OMNINET=m CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m -CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m CONFIG_USB_CYTHERM=m diff --git a/arch/arm/crypto/Kconfig b/arch/arm/crypto/Kconfig index b24df84a1d7a..043b0b18bf7e 100644 --- a/arch/arm/crypto/Kconfig +++ b/arch/arm/crypto/Kconfig @@ -98,6 +98,7 @@ config CRYPTO_AES_ARM_CE tristate "Accelerated AES using ARMv8 Crypto Extensions" depends on KERNEL_MODE_NEON select CRYPTO_BLKCIPHER + select CRYPTO_LIB_AES select CRYPTO_SIMD help Use an implementation of AES in CBC, CTR and XTS modes that uses diff --git a/arch/arm/crypto/aes-ce-core.S b/arch/arm/crypto/aes-ce-core.S index b978cdf133af..4d1707388d94 100644 --- a/arch/arm/crypto/aes-ce-core.S +++ b/arch/arm/crypto/aes-ce-core.S @@ -9,6 +9,7 @@ #include <asm/assembler.h> .text + .arch armv8-a .fpu crypto-neon-fp-armv8 .align 3 diff --git a/arch/arm/include/asm/xen/xen-ops.h b/arch/arm/include/asm/xen/xen-ops.h deleted file mode 100644 index ec154e719b11..000000000000 --- a/arch/arm/include/asm/xen/xen-ops.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_XEN_OPS_H -#define _ASM_XEN_OPS_H - -void xen_efi_runtime_setup(void); - -#endif /* _ASM_XEN_OPS_H */ diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index dd939e1325c6..29fd13684a68 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -763,7 +763,8 @@ static struct omap_hwmod_class_sysconfig am33xx_timer_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), + .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSC_HAS_RESET_STATUS, .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | SIDLE_SMART_WKUP), .sysc_fields = &omap_hwmod_sysc_type2, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 2bcb6345b873..54524775f278 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -231,8 +231,9 @@ static struct omap_hwmod am33xx_control_hwmod = { static struct omap_hwmod_class_sysconfig lcdc_sysc = { .rev_offs = 0x0, .sysc_offs = 0x54, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE, + .idlemodes = SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART, .sysc_fields = &omap_hwmod_sysc_type2, }; diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 1fde1bf53fb6..7ac9af56762d 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -74,83 +74,6 @@ int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused) return 0; } -/* - * This API is to be called during init to set the various voltage - * domains to the voltage as per the opp table. Typically we boot up - * at the nominal voltage. So this function finds out the rate of - * the clock associated with the voltage domain, finds out the correct - * opp entry and sets the voltage domain to the voltage specified - * in the opp entry - */ -static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, - const char *oh_name) -{ - struct voltagedomain *voltdm; - struct clk *clk; - struct dev_pm_opp *opp; - unsigned long freq, bootup_volt; - struct device *dev; - - if (!vdd_name || !clk_name || !oh_name) { - pr_err("%s: invalid parameters\n", __func__); - goto exit; - } - - if (!strncmp(oh_name, "mpu", 3)) - /* - * All current OMAPs share voltage rail and clock - * source, so CPU0 is used to represent the MPU-SS. - */ - dev = get_cpu_device(0); - else - dev = omap_device_get_by_hwmod_name(oh_name); - - if (IS_ERR(dev)) { - pr_err("%s: Unable to get dev pointer for hwmod %s\n", - __func__, oh_name); - goto exit; - } - - voltdm = voltdm_lookup(vdd_name); - if (!voltdm) { - pr_err("%s: unable to get vdd pointer for vdd_%s\n", - __func__, vdd_name); - goto exit; - } - - clk = clk_get(NULL, clk_name); - if (IS_ERR(clk)) { - pr_err("%s: unable to get clk %s\n", __func__, clk_name); - goto exit; - } - - freq = clk_get_rate(clk); - clk_put(clk); - - opp = dev_pm_opp_find_freq_ceil(dev, &freq); - if (IS_ERR(opp)) { - pr_err("%s: unable to find boot up OPP for vdd_%s\n", - __func__, vdd_name); - goto exit; - } - - bootup_volt = dev_pm_opp_get_voltage(opp); - dev_pm_opp_put(opp); - - if (!bootup_volt) { - pr_err("%s: unable to find voltage corresponding to the bootup OPP for vdd_%s\n", - __func__, vdd_name); - goto exit; - } - - voltdm_scale(voltdm, bootup_volt); - return 0; - -exit: - pr_err("%s: unable to set vdd_%s\n", __func__, vdd_name); - return -EINVAL; -} - #ifdef CONFIG_SUSPEND static int omap_pm_enter(suspend_state_t suspend_state) { @@ -208,25 +131,6 @@ void omap_common_suspend_init(void *pm_suspend) } #endif /* CONFIG_SUSPEND */ -static void __init omap3_init_voltages(void) -{ - if (!soc_is_omap34xx()) - return; - - omap2_set_init_voltage("mpu_iva", "dpll1_ck", "mpu"); - omap2_set_init_voltage("core", "l3_ick", "l3_main"); -} - -static void __init omap4_init_voltages(void) -{ - if (!soc_is_omap44xx()) - return; - - omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu"); - omap2_set_init_voltage("core", "l3_div_ck", "l3_main_1"); - omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva"); -} - int __maybe_unused omap_pm_nop_init(void) { return 0; @@ -246,10 +150,6 @@ int __init omap2_common_pm_late_init(void) omap4_twl_init(); omap_voltage_late_init(); - /* Initialize the voltages */ - omap3_init_voltages(); - omap4_init_voltages(); - /* Smartreflex device init */ omap_devinit_smartreflex(); diff --git a/arch/arm/xen/Makefile b/arch/arm/xen/Makefile index 7ed28982c4c3..c32d04713ba0 100644 --- a/arch/arm/xen/Makefile +++ b/arch/arm/xen/Makefile @@ -1,3 +1,2 @@ # SPDX-License-Identifier: GPL-2.0-only obj-y := enlighten.o hypercall.o grant-table.o p2m.o mm.o -obj-$(CONFIG_XEN_EFI) += efi.o diff --git a/arch/arm/xen/efi.c b/arch/arm/xen/efi.c deleted file mode 100644 index d687a73044bf..000000000000 --- a/arch/arm/xen/efi.c +++ /dev/null @@ -1,28 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (c) 2015, Linaro Limited, Shannon Zhao - */ - -#include <linux/efi.h> -#include <xen/xen-ops.h> -#include <asm/xen/xen-ops.h> - -/* Set XEN EFI runtime services function pointers. Other fields of struct efi, - * e.g. efi.systab, will be set like normal EFI. - */ -void __init xen_efi_runtime_setup(void) -{ - efi.get_time = xen_efi_get_time; - efi.set_time = xen_efi_set_time; - efi.get_wakeup_time = xen_efi_get_wakeup_time; - efi.set_wakeup_time = xen_efi_set_wakeup_time; - efi.get_variable = xen_efi_get_variable; - efi.get_next_variable = xen_efi_get_next_variable; - efi.set_variable = xen_efi_set_variable; - efi.query_variable_info = xen_efi_query_variable_info; - efi.update_capsule = xen_efi_update_capsule; - efi.query_capsule_caps = xen_efi_query_capsule_caps; - efi.get_next_high_mono_count = xen_efi_get_next_high_mono_count; - efi.reset_system = xen_efi_reset_system; -} -EXPORT_SYMBOL_GPL(xen_efi_runtime_setup); diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 1e57692552d9..dd6804a64f1a 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -15,7 +15,6 @@ #include <xen/xen-ops.h> #include <asm/xen/hypervisor.h> #include <asm/xen/hypercall.h> -#include <asm/xen/xen-ops.h> #include <asm/system_misc.h> #include <asm/efi.h> #include <linux/interrupt.h> @@ -437,7 +436,7 @@ EXPORT_SYMBOL_GPL(HYPERVISOR_memory_op); EXPORT_SYMBOL_GPL(HYPERVISOR_physdev_op); EXPORT_SYMBOL_GPL(HYPERVISOR_vcpu_op); EXPORT_SYMBOL_GPL(HYPERVISOR_tmem_op); -EXPORT_SYMBOL_GPL(HYPERVISOR_platform_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_platform_op_raw); EXPORT_SYMBOL_GPL(HYPERVISOR_multicall); EXPORT_SYMBOL_GPL(HYPERVISOR_vm_assist); EXPORT_SYMBOL_GPL(HYPERVISOR_dm_op); diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c index 2b2c208408bb..38fa917c8585 100644 --- a/arch/arm/xen/mm.c +++ b/arch/arm/xen/mm.c @@ -28,7 +28,10 @@ unsigned long xen_get_swiotlb_free_pages(unsigned int order) for_each_memblock(memory, reg) { if (reg->base < (phys_addr_t)0xffffffff) { - flags |= __GFP_DMA; + if (IS_ENABLED(CONFIG_ZONE_DMA32)) + flags |= __GFP_DMA32; + else + flags |= __GFP_DMA; break; } } |