summaryrefslogtreecommitdiff
path: root/arch/avr32/boards/atstk1000/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/avr32/boards/atstk1000/Kconfig')
-rw-r--r--arch/avr32/boards/atstk1000/Kconfig109
1 files changed, 0 insertions, 109 deletions
diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
deleted file mode 100644
index 8dc48214f0b7..000000000000
--- a/arch/avr32/boards/atstk1000/Kconfig
+++ /dev/null
@@ -1,109 +0,0 @@
-# STK1000 customization
-
-if BOARD_ATSTK1000
-
-choice
- prompt "ATSTK1000 CPU daughterboard type"
- default BOARD_ATSTK1002
-
-config BOARD_ATSTK1002
- bool "ATSTK1002"
- select CPU_AT32AP7000
-
-config BOARD_ATSTK1003
- bool "ATSTK1003"
- select CPU_AT32AP7001
-
-config BOARD_ATSTK1004
- bool "ATSTK1004"
- select CPU_AT32AP7002
-
-config BOARD_ATSTK1006
- bool "ATSTK1006"
- select CPU_AT32AP7000
-
-endchoice
-
-
-config BOARD_ATSTK100X_CUSTOM
- bool "Non-default STK1002/STK1003/STK1004 jumper settings"
- help
- You will normally leave the jumpers on the CPU card at their
- default settings. If you need to use certain peripherals,
- you will need to change some of those jumpers.
-
-if BOARD_ATSTK100X_CUSTOM
-
-config BOARD_ATSTK100X_SW1_CUSTOM
- bool "SW1: use SSC1 (not SPI0)"
- help
- This also prevents using the external DAC as an audio interface,
- and means you can't initialize the on-board QVGA display.
-
-config BOARD_ATSTK100X_SW2_CUSTOM
- bool "SW2: use IRDA or TIMER0 (not UART-A, MMC/SD, and PS2-A)"
- help
- If you change this you'll want an updated boot loader putting
- the console on UART-C not UART-A.
-
-config BOARD_ATSTK100X_SW3_CUSTOM
- bool "SW3: use TIMER1 (not SSC0 and GCLK)"
- help
- This also prevents using the external DAC as an audio interface.
-
-config BOARD_ATSTK100X_SW4_CUSTOM
- bool "SW4: use ISI/Camera (not GPIOs, SPI1, and PS2-B)"
- help
- To use the camera interface you'll need a custom card (on the
- PCI-format connector) connect a video sensor.
-
-config BOARD_ATSTK1002_SW5_CUSTOM
- bool "SW5: use MACB1 (not LCDC)"
- depends on BOARD_ATSTK1002
-
-config BOARD_ATSTK1002_SW6_CUSTOM
- bool "SW6: more GPIOs (not MACB0)"
- depends on BOARD_ATSTK1002
-
-endif # custom
-
-config BOARD_ATSTK100X_SPI1
- bool "Configure SPI1 controller"
- depends on !BOARD_ATSTK100X_SW4_CUSTOM
- help
- All the signals for the second SPI controller are available on
- GPIO lines and accessed through the J1 jumper block. Say "y"
- here to configure that SPI controller.
-
-config BOARD_ATSTK1000_J2_LED
- bool
- default BOARD_ATSTK1000_J2_LED8 || BOARD_ATSTK1000_J2_RGB
-
-choice
- prompt "LEDs connected to J2:"
- depends on LEDS_GPIO && !BOARD_ATSTK100X_SW4_CUSTOM
- optional
- help
- Select this if you have jumpered the J2 jumper block to the
- LED0..LED7 amber leds, or to the RGB leds, using a ten-pin
- IDC cable. A default "heartbeat" trigger is provided, but
- you can of course override this.
-
-config BOARD_ATSTK1000_J2_LED8
- bool "LED0..LED7"
- help
- Select this if J2 is jumpered to LED0..LED7 amber leds.
-
-config BOARD_ATSTK1000_J2_RGB
- bool "RGB leds"
- help
- Select this if J2 is jumpered to the RGB leds.
-
-endchoice
-
-config BOARD_ATSTK1000_EXTDAC
- bool
- depends on !BOARD_ATSTK100X_SW1_CUSTOM && !BOARD_ATSTK100X_SW3_CUSTOM
- default y
-
-endif # stk 1000