diff options
Diffstat (limited to 'arch/loongarch/Makefile')
| -rw-r--r-- | arch/loongarch/Makefile | 115 |
1 files changed, 91 insertions, 24 deletions
diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile index 4402387d2755..96ca1a688984 100644 --- a/arch/loongarch/Makefile +++ b/arch/loongarch/Makefile @@ -6,6 +6,7 @@ boot := arch/loongarch/boot KBUILD_DEFCONFIG := loongson3_defconfig +KBUILD_DTBS := dtbs image-name-y := vmlinux image-name-$(CONFIG_EFI_ZBOOT) := vmlinuz @@ -25,6 +26,21 @@ endif 32bit-emul = elf32loongarch 64bit-emul = elf64loongarch +CC_FLAGS_FPU := -mfpu=64 +CC_FLAGS_NO_FPU := -msoft-float + +ifdef CONFIG_UNWINDER_ORC +orc_hash_h := arch/$(SRCARCH)/include/generated/asm/orc_hash.h +orc_hash_sh := $(srctree)/scripts/orc_hash.sh +targets += $(orc_hash_h) +quiet_cmd_orc_hash = GEN $@ + cmd_orc_hash = mkdir -p $(dir $@); \ + $(CONFIG_SHELL) $(orc_hash_sh) < $< > $@ +$(orc_hash_h): $(srctree)/arch/loongarch/include/asm/orc_types.h $(orc_hash_sh) FORCE + $(call if_changed,orc_hash) +archprepare: $(orc_hash_h) +endif + ifdef CONFIG_DYNAMIC_FTRACE KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY CC_FLAGS_FTRACE := -fpatchable-function-entry=2 @@ -43,11 +59,11 @@ endif ifdef CONFIG_64BIT ld-emul = $(64bit-emul) -cflags-y += -mabi=lp64s +cflags-y += -mabi=lp64s -mcmodel=normal endif -cflags-y += -G0 -pipe -msoft-float -LDFLAGS_vmlinux += -G0 -static -n -nostdlib +cflags-y += -pipe $(CC_FLAGS_NO_FPU) +LDFLAGS_vmlinux += -static -n -nostdlib # When the assembler supports explicit relocation hint, we must use it. # GCC may have -mexplicit-relocs off by default if it was built with an old @@ -56,13 +72,21 @@ LDFLAGS_vmlinux += -G0 -static -n -nostdlib # When the assembler does not supports explicit relocation hint, we can't use # it. Disable it if the compiler supports it. # -# If you've seen "unknown reloc hint" message building the kernel and you are -# now wondering why "-mexplicit-relocs" is not wrapped with cc-option: the -# combination of a "new" assembler and "old" compiler is not supported. Either -# upgrade the compiler or downgrade the assembler. +# The combination of a "new" assembler and "old" GCC is not supported, given +# the rarity of this combo and the extra complexity needed to make it work. +# Either upgrade the compiler or downgrade the assembler; the build will error +# out if it is the case (by probing for the model attribute; all supported +# compilers in this case would have support). +# +# Also, -mdirect-extern-access is useful in case of building with explicit +# relocs, for avoiding unnecessary GOT accesses. It is harmless to not have +# support though. ifdef CONFIG_AS_HAS_EXPLICIT_RELOCS -cflags-y += -mexplicit-relocs -KBUILD_CFLAGS_KERNEL += -mdirect-extern-access +cflags-y += $(call cc-option,-mexplicit-relocs) +KBUILD_CFLAGS_KERNEL += $(call cc-option,-mdirect-extern-access) +KBUILD_CFLAGS_KERNEL += $(call cc-option,-fdirect-access-external-data) +KBUILD_AFLAGS_MODULE += $(call cc-option,-fno-direct-access-external-data) +KBUILD_CFLAGS_MODULE += $(call cc-option,-fno-direct-access-external-data) else cflags-y += $(call cc-option,-mno-explicit-relocs) KBUILD_AFLAGS_KERNEL += -Wa,-mla-global-with-pcrel @@ -71,14 +95,47 @@ KBUILD_AFLAGS_MODULE += -Wa,-mla-global-with-abs KBUILD_CFLAGS_MODULE += -fplt -Wa,-mla-global-with-abs,-mla-local-with-abs endif -cflags-y += -ffreestanding -cflags-y += $(call cc-option, -mno-check-zero-division) +KBUILD_AFLAGS += $(call cc-option,-mno-relax) $(call cc-option,-Wa$(comma)-mno-relax) +KBUILD_CFLAGS += $(call cc-option,-mno-relax) $(call cc-option,-Wa$(comma)-mno-relax) +KBUILD_AFLAGS += $(call cc-option,-mthin-add-sub) $(call cc-option,-Wa$(comma)-mthin-add-sub) +KBUILD_CFLAGS += $(call cc-option,-mthin-add-sub) $(call cc-option,-Wa$(comma)-mthin-add-sub) -ifndef CONFIG_PHYSICAL_START -load-y = 0x9000000000200000 +ifdef CONFIG_OBJTOOL +ifdef CONFIG_CC_HAS_ANNOTATE_TABLEJUMP +KBUILD_CFLAGS += -mannotate-tablejump +else +KBUILD_CFLAGS += -fno-jump-tables # keep compatibility with older compilers +endif +ifdef CONFIG_RUSTC_HAS_ANNOTATE_TABLEJUMP +KBUILD_RUSTFLAGS += -Cllvm-args=--loongarch-annotate-tablejump else -load-y = $(CONFIG_PHYSICAL_START) +KBUILD_RUSTFLAGS += $(if $(call rustc-min-version,109300),-Cjump-tables=n,-Zno-jump-tables) # keep compatibility with older compilers +endif +ifdef CONFIG_LTO_CLANG +# The annotate-tablejump option can not be passed to LLVM backend when LTO is enabled. +# Ensure it is aware of linker with LTO, '--loongarch-annotate-tablejump' also needs to +# be passed via '-mllvm' to ld.lld. +KBUILD_LDFLAGS += $(call ld-option,-mllvm --loongarch-annotate-tablejump) +endif +endif + +KBUILD_RUSTFLAGS += --target=loongarch64-unknown-none-softfloat -Ccode-model=small +KBUILD_RUSTFLAGS_KERNEL += -Zdirect-access-external-data=yes +KBUILD_RUSTFLAGS_MODULE += -Zdirect-access-external-data=no + +ifeq ($(CONFIG_RELOCATABLE),y) +KBUILD_CFLAGS_KERNEL += -fPIE +KBUILD_RUSTFLAGS_KERNEL += -Crelocation-model=pie +LDFLAGS_vmlinux += -static -pie --no-dynamic-linker -z notext $(call ld-option, --apply-dynamic-relocs) endif + +cflags-y += $(call cc-option, -mno-check-zero-division -fno-isolate-erroneous-paths-dereference) + +ifndef CONFIG_KASAN +cflags-y += -fno-builtin-memcpy -fno-builtin-memmove -fno-builtin-memset +endif + +load-y = 0x9000000000200000 bootvars-y = VMLINUX_LOAD_ADDRESS=$(load-y) drivers-$(CONFIG_PCI) += arch/loongarch/pci/ @@ -91,17 +148,22 @@ KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y) # instead of .eh_frame so we don't discard them. KBUILD_CFLAGS += -fno-asynchronous-unwind-tables +ifdef CONFIG_ARCH_STRICT_ALIGN # Don't emit unaligned accesses. # Not all LoongArch cores support unaligned access, and as kernel we can't # rely on others to provide emulation for these accesses. KBUILD_CFLAGS += $(call cc-option,-mstrict-align) +else +# Optimise for performance on hardware supports unaligned access. +KBUILD_CFLAGS += $(call cc-option,-mno-strict-align) +endif KBUILD_CFLAGS += -isystem $(shell $(CC) -print-file-name=include) KBUILD_LDFLAGS += -m $(ld-emul) -ifdef CONFIG_LOONGARCH -CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \ +ifdef need-compiler +CHECKFLAGS += $(shell $(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \ grep -E -vw '__GNUC_(MINOR_|PATCHLEVEL_)?_' | \ sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/" -e 's/\$$/&&/g') endif @@ -109,6 +171,8 @@ endif libs-y += arch/loongarch/lib/ libs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a +drivers-y += arch/loongarch/crypto/ + # suspend and hibernation support drivers-$(CONFIG_PM) += arch/loongarch/power/ @@ -118,21 +182,24 @@ vdso_prepare: prepare0 $(Q)$(MAKE) $(build)=arch/loongarch/vdso include/generated/vdso-offsets.h endif -PHONY += vdso_install -vdso_install: - $(Q)$(MAKE) $(build)=arch/loongarch/vdso $@ +vdso-install-y += arch/loongarch/vdso/vdso.so.dbg + +all: $(notdir $(KBUILD_IMAGE)) $(KBUILD_DTBS) -all: $(notdir $(KBUILD_IMAGE)) +vmlinuz.efi: vmlinux.efi vmlinux.elf vmlinux.efi vmlinuz.efi: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/$@ install: - $(Q)install -D -m 755 $(KBUILD_IMAGE) $(INSTALL_PATH)/$(image-name-y)-$(KERNELRELEASE) - $(Q)install -D -m 644 .config $(INSTALL_PATH)/config-$(KERNELRELEASE) - $(Q)install -D -m 644 System.map $(INSTALL_PATH)/System.map-$(KERNELRELEASE) + $(call cmd,install) define archhelp - echo ' install - install kernel into $(INSTALL_PATH)' + echo ' vmlinux.elf - Uncompressed ELF kernel image (arch/loongarch/boot/vmlinux.elf)' + echo ' vmlinux.efi - Uncompressed EFI kernel image (arch/loongarch/boot/vmlinux.efi)' + echo ' vmlinuz.efi - GZIP/ZSTD-compressed EFI kernel image (arch/loongarch/boot/vmlinuz.efi)' + echo ' Default when CONFIG_EFI_ZBOOT=y' + echo ' install - Install kernel using (your) ~/bin/$(INSTALLKERNEL) or' + echo ' (distribution) /sbin/$(INSTALLKERNEL) or install.sh to $$(INSTALL_PATH)' echo endef |