diff options
Diffstat (limited to 'arch/m68k/bvme6000/config.c')
| -rw-r--r-- | arch/m68k/bvme6000/config.c | 151 |
1 files changed, 62 insertions, 89 deletions
diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c index 8943aa4c18e6..8a2ee69a09f6 100644 --- a/arch/m68k/bvme6000/config.c +++ b/arch/m68k/bvme6000/config.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * arch/m68k/bvme6000/config.c * @@ -8,51 +9,41 @@ * linux/amiga/config.c * * Copyright (C) 1993 Hamish Macdonald - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file README.legal in the main directory of this archive - * for more details. */ #include <linux/types.h> #include <linux/kernel.h> #include <linux/mm.h> #include <linux/tty.h> +#include <linux/clocksource.h> #include <linux/console.h> #include <linux/linkage.h> #include <linux/init.h> #include <linux/major.h> -#include <linux/genhd.h> #include <linux/rtc.h> #include <linux/interrupt.h> #include <linux/bcd.h> #include <asm/bootinfo.h> -#include <asm/pgtable.h> +#include <asm/bootinfo-vme.h> +#include <asm/byteorder.h> #include <asm/setup.h> #include <asm/irq.h> #include <asm/traps.h> -#include <asm/rtc.h> #include <asm/machdep.h> #include <asm/bvme6000hw.h> +#include <asm/config.h> static void bvme6000_get_model(char *model); -extern void bvme6000_sched_init(irq_handler_t handler); -extern u32 bvme6000_gettimeoffset(void); +extern void bvme6000_sched_init(void); extern int bvme6000_hwclk (int, struct rtc_time *); -extern int bvme6000_set_clock_mmss (unsigned long); extern void bvme6000_reset (void); void bvme6000_set_vectors (void); -/* Save tick handler routine pointer, will point to xtime_update() in - * kernel/timer/timekeeping.c, called via bvme6000_process_int() */ - -static irq_handler_t tick_handler; - -int bvme6000_parse_bootinfo(const struct bi_record *bi) +int __init bvme6000_parse_bootinfo(const struct bi_record *bi) { - if (bi->tag == BI_VME_TYPE) + if (be16_to_cpu(bi->tag) == BI_VME_TYPE) return 0; else return 1; @@ -62,8 +53,8 @@ void bvme6000_reset(void) { volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE; - printk ("\r\n\nCalled bvme6000_reset\r\n" - "\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r"); + pr_info("\r\n\nCalled bvme6000_reset\r\n" + "\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r\r"); /* The string of returns is to delay the reset until the whole * message is output. */ /* Enable the watchdog, via PIT port C bit 4 */ @@ -107,17 +98,14 @@ void __init config_bvme6000(void) bvme6000_set_vectors(); #endif - mach_max_dma_address = 0xffffffff; mach_sched_init = bvme6000_sched_init; mach_init_IRQ = bvme6000_init_IRQ; - arch_gettimeoffset = bvme6000_gettimeoffset; mach_hwclk = bvme6000_hwclk; - mach_set_clock_mmss = bvme6000_set_clock_mmss; mach_reset = bvme6000_reset; mach_get_model = bvme6000_get_model; - printk ("Board is %sconfigured as a System Controller\n", - *config_reg_ptr & BVME_CONFIG_SW1 ? "" : "not "); + pr_info("Board is %sconfigured as a System Controller\n", + *config_reg_ptr & BVME_CONFIG_SW1 ? "" : "not "); /* Now do the PIT configuration */ @@ -139,7 +127,7 @@ void __init config_bvme6000(void) } -irqreturn_t bvme6000_abort_int (int irq, void *dev_id) +static irqreturn_t bvme6000_abort_int(int irq, void *dev_id) { unsigned long *new = (unsigned long *)vectors; unsigned long *old = (unsigned long *)0xf8000000; @@ -155,15 +143,37 @@ irqreturn_t bvme6000_abort_int (int irq, void *dev_id) return IRQ_HANDLED; } +static u64 bvme6000_read_clk(struct clocksource *cs); + +static struct clocksource bvme6000_clk = { + .name = "rtc", + .rating = 250, + .read = bvme6000_read_clk, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static u32 clk_total, clk_offset; + +#define RTC_TIMER_CLOCK_FREQ 8000000 +#define RTC_TIMER_CYCLES (RTC_TIMER_CLOCK_FREQ / HZ) +#define RTC_TIMER_COUNT ((RTC_TIMER_CYCLES / 2) - 1) static irqreturn_t bvme6000_timer_int (int irq, void *dev_id) { + unsigned long flags; volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE; - unsigned char msr = rtc->msr & 0xc0; + unsigned char msr; + local_irq_save(flags); + msr = rtc->msr & 0xc0; rtc->msr = msr | 0x20; /* Ack the interrupt */ + clk_total += RTC_TIMER_CYCLES; + clk_offset = 0; + legacy_timer_tick(1); + local_irq_restore(flags); - return tick_handler(irq, dev_id); + return IRQ_HANDLED; } /* @@ -175,21 +185,20 @@ static irqreturn_t bvme6000_timer_int (int irq, void *dev_id) * so divide by 8 to get the microsecond result. */ -void bvme6000_sched_init (irq_handler_t timer_routine) +void bvme6000_sched_init (void) { volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE; unsigned char msr = rtc->msr & 0xc0; rtc->msr = 0; /* Ensure timer registers accessible */ - tick_handler = timer_routine; - if (request_irq(BVME_IRQ_RTC, bvme6000_timer_int, 0, - "timer", bvme6000_timer_int)) + if (request_irq(BVME_IRQ_RTC, bvme6000_timer_int, IRQF_TIMER, "timer", + NULL)) panic ("Couldn't register timer int"); rtc->t1cr_omr = 0x04; /* Mode 2, ext clk */ - rtc->t1msb = 39999 >> 8; - rtc->t1lsb = 39999 & 0xff; + rtc->t1msb = RTC_TIMER_COUNT >> 8; + rtc->t1lsb = RTC_TIMER_COUNT & 0xff; rtc->irr_icr1 &= 0xef; /* Route timer 1 to INTR pin */ rtc->msr = 0x40; /* Access int.cntrl, etc */ rtc->pfr_icr0 = 0x80; /* Just timer 1 ints enabled */ @@ -201,14 +210,14 @@ void bvme6000_sched_init (irq_handler_t timer_routine) rtc->msr = msr; + clocksource_register_hz(&bvme6000_clk, RTC_TIMER_CLOCK_FREQ); + if (request_irq(BVME_IRQ_ABORT, bvme6000_abort_int, 0, "abort", bvme6000_abort_int)) panic ("Couldn't register abort int"); } -/* This is always executed with interrupts disabled. */ - /* * NOTE: Don't accept any readings within 5us of rollover, as * the T1INT bit may be a little slow getting set. There is also @@ -216,14 +225,18 @@ void bvme6000_sched_init (irq_handler_t timer_routine) * results... */ -u32 bvme6000_gettimeoffset(void) +static u64 bvme6000_read_clk(struct clocksource *cs) { + unsigned long flags; volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE; volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE; - unsigned char msr = rtc->msr & 0xc0; + unsigned char msr, msb; unsigned char t1int, t1op; u32 v = 800000, ov; + local_irq_save(flags); + + msr = rtc->msr & 0xc0; rtc->msr = 0; /* Ensure timer registers accessible */ do { @@ -231,22 +244,25 @@ u32 bvme6000_gettimeoffset(void) t1int = rtc->msr & 0x20; t1op = pit->pcdr & 0x04; rtc->t1cr_omr |= 0x40; /* Latch timer1 */ - v = rtc->t1msb << 8; /* Read timer1 */ - v |= rtc->t1lsb; /* Read timer1 */ + msb = rtc->t1msb; /* Read timer1 */ + v = (msb << 8) | rtc->t1lsb; /* Read timer1 */ } while (t1int != (rtc->msr & 0x20) || t1op != (pit->pcdr & 0x04) || abs(ov-v) > 80 || - v > 39960); + v > RTC_TIMER_COUNT - (RTC_TIMER_COUNT / 100)); - v = 39999 - v; + v = RTC_TIMER_COUNT - v; if (!t1op) /* If in second half cycle.. */ - v += 40000; - v /= 8; /* Convert ticks to microseconds */ - if (t1int) - v += 10000; /* Int pending, + 10ms */ + v += RTC_TIMER_CYCLES / 2; + if (msb > 0 && t1int) + clk_offset = RTC_TIMER_CYCLES; rtc->msr = msr; - return v * 1000; + v += clk_offset + clk_total; + + local_irq_restore(flags); + + return v; } /* @@ -304,46 +320,3 @@ int bvme6000_hwclk(int op, struct rtc_time *t) return 0; } - -/* - * Set the minutes and seconds from seconds value 'nowtime'. Fail if - * clock is out by > 30 minutes. Logic lifted from atari code. - * Algorithm is to wait for the 10ms register to change, and then to - * wait a short while, and then set it. - */ - -int bvme6000_set_clock_mmss (unsigned long nowtime) -{ - int retval = 0; - short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60; - unsigned char rtc_minutes, rtc_tenms; - volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE; - unsigned char msr = rtc->msr & 0xc0; - unsigned long flags; - volatile int i; - - rtc->msr = 0; /* Ensure clock accessible */ - rtc_minutes = bcd2bin (rtc->bcd_min); - - if ((rtc_minutes < real_minutes - ? real_minutes - rtc_minutes - : rtc_minutes - real_minutes) < 30) - { - local_irq_save(flags); - rtc_tenms = rtc->bcd_tenms; - while (rtc_tenms == rtc->bcd_tenms) - ; - for (i = 0; i < 1000; i++) - ; - rtc->bcd_min = bin2bcd(real_minutes); - rtc->bcd_sec = bin2bcd(real_seconds); - local_irq_restore(flags); - } - else - retval = -1; - - rtc->msr = msr; - - return retval; -} - |