diff options
Diffstat (limited to 'arch/mips/Makefile')
| -rw-r--r-- | arch/mips/Makefile | 98 |
1 files changed, 59 insertions, 39 deletions
diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 490dea07d4e0..d9057e29bc62 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -95,24 +95,11 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlinuz # crossformat linking we rely on the elf2ecoff tool for format conversion. # cflags-y += -G 0 -mno-abicalls -fno-pic -pipe -cflags-y += -msoft-float +cflags-y += -msoft-float -Wa,-msoft-float LDFLAGS_vmlinux += -G 0 -static -n -nostdlib KBUILD_AFLAGS_MODULE += -mlong-calls KBUILD_CFLAGS_MODULE += -mlong-calls -ifeq ($(CONFIG_RELOCATABLE),y) -LDFLAGS_vmlinux += --emit-relocs -endif - -# -# pass -msoft-float to GAS if it supports it. However on newer binutils -# (specifically newer than 2.24.51.20140728) we then also need to explicitly -# set ".set hardfloat" in all files which manipulate floating point registers. -# -ifneq ($(call as-option,-Wa$(comma)-msoft-float,),) - cflags-y += -DGAS_HAS_SET_HARDFLOAT -Wa,-msoft-float -endif - cflags-y += -ffreestanding cflags-$(CONFIG_CPU_BIG_ENDIAN) += -EB @@ -152,15 +139,15 @@ cflags-y += -fno-stack-check # # Avoid this by explicitly disabling that assembler behaviour. # -cflags-y += $(call as-option,-Wa$(comma)-mno-fix-loongson3-llsc,) +cflags-y += $(call cc-option,-Wa$(comma)-mno-fix-loongson3-llsc,) # # CPU-dependent compiler/assembler options for optimization. # -cflags-$(CONFIG_CPU_R3000) += -march=r3000 -cflags-$(CONFIG_CPU_R4300) += -march=r4300 -Wa,--trap -cflags-$(CONFIG_CPU_R4X00) += -march=r4600 -Wa,--trap -cflags-$(CONFIG_CPU_TX49XX) += -march=r4600 -Wa,--trap +cflags-$(CONFIG_CPU_R3000) += $(call cc-option,-march=r3000,-march=mips1) +cflags-$(CONFIG_CPU_R4300) += $(call cc-option,-march=r4300,-march=mips3) -Wa,--trap +cflags-$(CONFIG_CPU_R4X00) += $(call cc-option,-march=r4600,-march=mips3) -Wa,--trap +cflags-$(CONFIG_CPU_TX49XX) += $(call cc-option,-march=r4600,-march=mips3) -Wa,--trap cflags-$(CONFIG_CPU_MIPS32_R1) += -march=mips32 -Wa,--trap cflags-$(CONFIG_CPU_MIPS32_R2) += -march=mips32r2 -Wa,--trap cflags-$(CONFIG_CPU_MIPS32_R5) += -march=mips32r5 -Wa,--trap -modd-spreg @@ -169,30 +156,66 @@ cflags-$(CONFIG_CPU_MIPS64_R1) += -march=mips64 -Wa,--trap cflags-$(CONFIG_CPU_MIPS64_R2) += -march=mips64r2 -Wa,--trap cflags-$(CONFIG_CPU_MIPS64_R5) += -march=mips64r5 -Wa,--trap cflags-$(CONFIG_CPU_MIPS64_R6) += -march=mips64r6 -Wa,--trap -cflags-$(CONFIG_CPU_P5600) += -march=p5600 -Wa,--trap -modd-spreg -cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap -cflags-$(CONFIG_CPU_R5500) += $(call cc-option,-march=r5500,-march=r5000) \ +cflags-$(CONFIG_CPU_P5600) += $(call cc-option,-march=p5600,-march=mips32r5) \ + -Wa,--trap -modd-spreg +cflags-$(CONFIG_CPU_R5000) += $(call cc-option,-march=r5000,-march=mips4) \ -Wa,--trap -cflags-$(CONFIG_CPU_NEVADA) += $(call cc-option,-march=rm5200,-march=r5000) \ +cflags-$(CONFIG_CPU_R5500) += $(call cc-option,-march=r5500,-march=mips4) \ -Wa,--trap -cflags-$(CONFIG_CPU_RM7000) += $(call cc-option,-march=rm7000,-march=r5000) \ +cflags-$(CONFIG_CPU_NEVADA) += $(call cc-option,-march=rm5200,-march=mips4) \ -Wa,--trap -cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-march=sb1,-march=r5000) \ +cflags-$(CONFIG_CPU_RM7000) += $(call cc-option,-march=rm7000,-march=mips4) \ + -Wa,--trap +cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-march=sb1,-march=mips64) \ -Wa,--trap cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-mno-mdmx) cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-mno-mips3d) -cflags-$(CONFIG_CPU_R10000) += $(call cc-option,-march=r10000,-march=r8000) \ +cflags-$(CONFIG_CPU_R10000) += $(call cc-option,-march=r10000,-march=mips4) \ -Wa,--trap -cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += $(call cc-option,-march=octeon) -Wa,--trap -ifeq (,$(findstring march=octeon, $(cflags-$(CONFIG_CPU_CAVIUM_OCTEON)))) -cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon -endif +cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -march=octeon -Wa,--trap cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1 -cflags-$(CONFIG_CPU_BMIPS) += -march=mips32 -Wa,-mips32 -Wa,--trap +cflags-$(CONFIG_CPU_BMIPS) += -march=mips32 -Wa,--trap + +cflags-$(CONFIG_CPU_LOONGSON2E) += \ + $(call cc-option,-march=loongson2e,-march=mips3) -Wa,--trap +cflags-$(CONFIG_CPU_LOONGSON2F) += \ + $(call cc-option,-march=loongson2f,-march=mips3) -Wa,--trap +# Some -march= flags enable MMI instructions, and GCC complains about that +# support being enabled alongside -msoft-float. Thus explicitly disable MMI. +cflags-$(CONFIG_CPU_LOONGSON2EF) += $(call cc-option,-mno-loongson-mmi) +cflags-$(CONFIG_CPU_LOONGSON64) += \ + $(call cc-option,-march=loongson3a,-march=mips64r2) -Wa,--trap +cflags-$(CONFIG_CPU_LOONGSON64) += $(call cc-option,-mno-loongson-mmi) cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,) cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,) cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS) += $(call cc-option,-mno-daddi,) +ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS +cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa,-mfix-loongson2f-nop +cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa,-mfix-loongson2f-jump +endif + +# +# Some versions of binutils, not currently mainline as of 2019/02/04, support +# an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction +# to work around a CPU bug (see __SYNC_loongson3_war in asm/sync.h for a +# description). +# +# We disable this in order to prevent the assembler meddling with the +# instruction that labels refer to, ie. if we label an ll instruction: +# +# 1: ll v0, 0(a0) +# +# ...then with the assembler fix applied the label may actually point at a sync +# instruction inserted by the assembler, and if we were using the label in an +# exception table the table would no longer contain the address of the ll +# instruction. +# +# Avoid this by explicitly disabling that assembler behaviour. If upstream +# binutils does not merge support for the flag then we can revisit & remove +# this later - for now it ensures vendor toolchains don't cause problems. +# +cflags-$(CONFIG_CPU_LOONGSON64) += $(call as-option,-Wa$(comma)-mno-fix-loongson3-llsc,) # For smartmips configurations, there are hundreds of warnings due to ISA overrides # in assembly and header files. smartmips is only supported for MIPS32r1 onwards @@ -270,12 +293,12 @@ drivers-$(CONFIG_PCI) += arch/mips/pci/ ifdef CONFIG_64BIT ifndef KBUILD_SYM32 ifeq ($(shell expr $(load-y) \< 0xffffffff80000000), 0) - KBUILD_SYM32 = y + KBUILD_SYM32 = $(call cc-option-yn, -msym32) endif endif - ifeq ($(KBUILD_SYM32)$(call cc-option-yn,-msym32), yy) - cflags-y += -msym32 -DKBUILD_64BIT_SYM32 + ifeq ($(KBUILD_SYM32), y) + cflags-$(KBUILD_SYM32) += -msym32 -DKBUILD_64BIT_SYM32 else ifeq ($(CONFIG_CPU_DADDI_WORKAROUNDS), y) $(error CONFIG_CPU_DADDI_WORKAROUNDS unsupported without -msym32) @@ -316,8 +339,8 @@ KBUILD_CFLAGS += -fno-asynchronous-unwind-tables KBUILD_LDFLAGS += -m $(ld-emul) -ifdef CONFIG_MIPS -CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \ +ifdef need-compiler +CHECKFLAGS += $(shell $(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \ grep -E -vw '__GNUC_(MINOR_|PATCHLEVEL_)?_' | \ sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/" -e 's/\$$/&&/g') endif @@ -396,9 +419,6 @@ endif CLEAN_FILES += vmlinux.32 vmlinux.64 -# device-trees -core-y += arch/mips/boot/dts/ - archprepare: ifdef CONFIG_MIPS32_N32 @$(kecho) ' Checking missing-syscalls for N32' |