1 files changed, 17 insertions, 22 deletions

diff --git a/arch/mips/boot/dts/ingenic/gcw0.dts b/arch/mips/boot/dts/ingenic/gcw0.dts
index 8d22828787d8..8455778928b7 100644
--- a/arch/mips/boot/dts/ingenic/gcw0.dts
+++ b/arch/mips/boot/dts/ingenic/gcw0.dts
@@ -74,7 +74,6 @@
 		simple-audio-card,widgets =
 			"Speaker", "Speaker",
 			"Headphone", "Headphones",
-			"Line", "FM Radio",
 			"Microphone", "Built-in Mic";
 		simple-audio-card,routing =
 			"Headphones Amp INL", "LHPOUT",
@@ -85,14 +84,14 @@
 			"Speaker Amp INR", "ROUT",
 			"Speaker", "Speaker Amp OUTL",
 			"Speaker", "Speaker Amp OUTR",
-			"LLINEIN", "FM Radio",
-			"RLINEIN", "FM Radio",
+			"LLINEIN", "Cap-less",
+			"RLINEIN", "Cap-less",
 			"Built-in Mic", "MICBIAS",
 			"MIC1P", "Built-in Mic",
 			"MIC1N", "Built-in Mic";
 		simple-audio-card,pin-switches = "Speaker", "Headphones";
 
-		simple-audio-card,hp-det-gpio = <&gpf 21 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,hp-det-gpios = <&gpf 21 GPIO_ACTIVE_LOW>;
 		simple-audio-card,aux-devs = <&speaker_amp>, <&headphones_amp>;
 
 		simple-audio-card,bitclock-master = <&dai_codec>;
@@ -131,89 +130,86 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		autorepeat;
 
-		button@0 {
+		button-0 {
 			label = "D-pad up";
 			linux,code = <KEY_UP>;
 			linux,can-disable;
 			gpios = <&gpe 21 GPIO_ACTIVE_LOW>;
 		};
 
-		button@1 {
+		button-1 {
 			label = "D-pad down";
 			linux,code = <KEY_DOWN>;
 			linux,can-disable;
 			gpios = <&gpe 25 GPIO_ACTIVE_LOW>;
 		};
 
-		button@2 {
+		button-2 {
 			label = "D-pad left";
 			linux,code = <KEY_LEFT>;
 			linux,can-disable;
 			gpios = <&gpe 23 GPIO_ACTIVE_LOW>;
 		};
 
-		button@3 {
+		button-3 {
 			label = "D-pad right";
 			linux,code = <KEY_RIGHT>;
 			linux,can-disable;
 			gpios = <&gpe 24 GPIO_ACTIVE_LOW>;
 		};
 
-		button@4 {
+		button-4 {
 			label = "Button A";
 			linux,code = <KEY_LEFTCTRL>;
 			linux,can-disable;
 			gpios = <&gpe 29 GPIO_ACTIVE_LOW>;
 		};
 
-		button@5 {
+		button-5 {
 			label = "Button B";
 			linux,code = <KEY_LEFTALT>;
 			linux,can-disable;
 			gpios = <&gpe 20 GPIO_ACTIVE_LOW>;
 		};
 
-		button@6 {
+		button-6 {
 			label = "Button Y";
 			linux,code = <KEY_SPACE>;
 			linux,can-disable;
 			gpios = <&gpe 27 GPIO_ACTIVE_LOW>;
 		};
 
-		button@7 {
+		button-7 {
 			label = "Button X";
 			linux,code = <KEY_LEFTSHIFT>;
 			linux,can-disable;
 			gpios = <&gpe 28 GPIO_ACTIVE_LOW>;
 		};
 
-		button@8 {
+		button-8 {
 			label = "Left shoulder button";
 			linux,code = <KEY_TAB>;
 			linux,can-disable;
 			gpios = <&gpb 20 GPIO_ACTIVE_LOW>;
 		};
 
-		button@9 {
+		button-9 {
 			label = "Right shoulder button";
 			linux,code = <KEY_BACKSPACE>;
 			linux,can-disable;
 			gpios = <&gpe 26 GPIO_ACTIVE_LOW>;
 		};
 
-		button@10 {
+		button-10 {
 			label = "Start button";
 			linux,code = <KEY_ENTER>;
 			linux,can-disable;
 			gpios = <&gpb 21 GPIO_ACTIVE_LOW>;
 		};
 
-		button@11 {
+		button-11 {
 			label = "Select button";
 			linux,code = <KEY_ESC>;
 			linux,can-disable;
@@ -224,7 +220,7 @@
 			gpios = <&gpd 18 GPIO_ACTIVE_HIGH>;
 		};
 
-		button@12 {
+		button-12 {
 			label = "Power slider";
 			linux,code = <KEY_POWER>;
 			linux,can-disable;
@@ -232,7 +228,7 @@
 			wakeup-source;
 		};
 
-		button@13 {
+		button-13 {
 			label = "Power hold";
 			linux,code = <KEY_PAUSE>;
 			linux,can-disable;
@@ -345,7 +341,6 @@
 
 			spi-max-frequency = <3125000>;
 			spi-3wire;
-			spi-cs-high;
 
 			reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;