diff options
Diffstat (limited to 'arch/mips/cavium-octeon/executive/cvmx-helper-board.c')
| -rw-r--r-- | arch/mips/cavium-octeon/executive/cvmx-helper-board.c | 102 |
1 files changed, 13 insertions, 89 deletions
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c index ab8362e04461..0fd9ac76eb74 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c @@ -31,6 +31,7 @@ * network ports from the rest of the cvmx-helper files. */ +#include <linux/bug.h> #include <asm/octeon/octeon.h> #include <asm/octeon/cvmx-bootinfo.h> @@ -43,7 +44,7 @@ #include <asm/octeon/cvmx-gmxx-defs.h> #include <asm/octeon/cvmx-asxx-defs.h> -/** +/* * Return the MII PHY address associated with the given IPD * port. A result of -1 means there isn't a MII capable PHY * connected to this port. On chips supporting multiple MII @@ -188,7 +189,7 @@ int cvmx_helper_board_get_mii_address(int ipd_port) return -1; } -/** +/* * This function is the board specific method of determining an * ethernet ports link speed. Most Octeon boards have Marvell PHYs * and are handled by the fall through case. This function must be @@ -206,60 +207,22 @@ int cvmx_helper_board_get_mii_address(int ipd_port) * Returns The ports link status. If the link isn't fully resolved, this must * return zero. */ -cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port) +union cvmx_helper_link_info __cvmx_helper_board_link_get(int ipd_port) { - cvmx_helper_link_info_t result; + union cvmx_helper_link_info result; + + WARN_ONCE(!octeon_is_simulation(), + "Using deprecated link status - please update your DT"); /* Unless we fix it later, all links are defaulted to down */ result.u64 = 0; - /* - * This switch statement should handle all ports that either don't use - * Marvell PHYS, or don't support in-band status. - */ - switch (cvmx_sysinfo_get()->board_type) { - case CVMX_BOARD_TYPE_SIM: + if (octeon_is_simulation()) { /* The simulator gives you a simulated 1Gbps full duplex link */ result.s.link_up = 1; result.s.full_duplex = 1; result.s.speed = 1000; return result; - case CVMX_BOARD_TYPE_EBH3100: - case CVMX_BOARD_TYPE_CN3010_EVB_HS5: - case CVMX_BOARD_TYPE_CN3005_EVB_HS5: - case CVMX_BOARD_TYPE_CN3020_EVB_HS5: - /* Port 1 on these boards is always Gigabit */ - if (ipd_port == 1) { - result.s.link_up = 1; - result.s.full_duplex = 1; - result.s.speed = 1000; - return result; - } - /* Fall through to the generic code below */ - break; - case CVMX_BOARD_TYPE_CUST_NB5: - /* Port 1 on these boards is always Gigabit */ - if (ipd_port == 1) { - result.s.link_up = 1; - result.s.full_duplex = 1; - result.s.speed = 1000; - return result; - } - break; - case CVMX_BOARD_TYPE_BBGW_REF: - /* Port 1 on these boards is always Gigabit */ - if (ipd_port == 2) { - /* Port 2 is not hooked up */ - result.u64 = 0; - return result; - } else { - /* Ports 0 and 1 connect to the switch */ - result.s.link_up = 1; - result.s.full_duplex = 1; - result.s.speed = 1000; - return result; - } - break; } if (OCTEON_IS_MODEL(OCTEON_CN3XXX) @@ -311,7 +274,7 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port) return result; } -/** +/* * This function is called by cvmx_helper_interface_probe() after it * determines the number of ports Octeon can support on a specific * interface. This function is the per board location to override @@ -319,9 +282,9 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port) * support and should return the number of actual ports on the * board. * - * This function must be modifed for every new Octeon board. + * This function must be modified for every new Octeon board. * Internally it uses switch statements based on the cvmx_sysinfo - * data to determine board types and revisions. It relys on the + * data to determine board types and revisions. It relies on the * fact that every Octeon board receives a unique board type * enumeration from the bootloader. * @@ -357,46 +320,7 @@ int __cvmx_helper_board_interface_probe(int interface, int supported_ports) return supported_ports; } -/** - * Enable packet input/output from the hardware. This function is - * called after by cvmx_helper_packet_hardware_enable() to - * perform board specific initialization. For most boards - * nothing is needed. - * - * @interface: Interface to enable - * - * Returns Zero on success, negative on failure - */ -int __cvmx_helper_board_hardware_enable(int interface) -{ - if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_CN3005_EVB_HS5) { - if (interface == 0) { - /* Different config for switch port */ - cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(1, interface), 0); - cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(1, interface), 0); - /* - * Boards with gigabit WAN ports need a - * different setting that is compatible with - * 100 Mbit settings - */ - cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface), - 0xc); - cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface), - 0xc); - } - } else if (cvmx_sysinfo_get()->board_type == - CVMX_BOARD_TYPE_UBNT_E100) { - cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface), 0); - cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface), 0x10); - cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(1, interface), 0); - cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(1, interface), 0x10); - cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(2, interface), 0); - cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(2, interface), 0x10); - } - return 0; -} - -/** +/* * Get the clock type used for the USB block based on board type. * Used by the USB code for auto configuration of clock type. * |