diff options
Diffstat (limited to 'arch/mips/cavium-octeon/octeon-usb.c')
| -rw-r--r-- | arch/mips/cavium-octeon/octeon-usb.c | 629 |
1 files changed, 316 insertions, 313 deletions
diff --git a/arch/mips/cavium-octeon/octeon-usb.c b/arch/mips/cavium-octeon/octeon-usb.c index 28677c615175..2add435ad038 100644 --- a/arch/mips/cavium-octeon/octeon-usb.c +++ b/arch/mips/cavium-octeon/octeon-usb.c @@ -8,232 +8,255 @@ * for more details. */ -#include <linux/module.h> +#include <linux/bitfield.h> +#include <linux/bits.h> #include <linux/device.h> -#include <linux/mutex.h> #include <linux/delay.h> -#include <linux/of_platform.h> #include <linux/io.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of_platform.h> -#include <asm/octeon/octeon.h> +/* + * USB Control Register + */ +#define USBDRD_UCTL_CTL 0x00 +/* BIST fast-clear mode select. A BIST run with this bit set + * clears all entries in USBH RAMs to 0x0. + */ +# define USBDRD_UCTL_CTL_CLEAR_BIST BIT(63) +/* 1 = Start BIST and cleared by hardware */ +# define USBDRD_UCTL_CTL_START_BIST BIT(62) +/* Reference clock select for SuperSpeed and HighSpeed PLLs: + * 0x0 = Both PLLs use DLMC_REF_CLK0 for reference clock + * 0x1 = Both PLLs use DLMC_REF_CLK1 for reference clock + * 0x2 = SuperSpeed PLL uses DLMC_REF_CLK0 for reference clock & + * HighSpeed PLL uses PLL_REF_CLK for reference clck + * 0x3 = SuperSpeed PLL uses DLMC_REF_CLK1 for reference clock & + * HighSpeed PLL uses PLL_REF_CLK for reference clck + */ +# define USBDRD_UCTL_CTL_REF_CLK_SEL GENMASK(61, 60) +/* 1 = Spread-spectrum clock enable, 0 = SS clock disable */ +# define USBDRD_UCTL_CTL_SSC_EN BIT(59) +/* Spread-spectrum clock modulation range: + * 0x0 = -4980 ppm downspread + * 0x1 = -4492 ppm downspread + * 0x2 = -4003 ppm downspread + * 0x3 - 0x7 = Reserved + */ +# define USBDRD_UCTL_CTL_SSC_RANGE GENMASK(58, 56) +/* Enable non-standard oscillator frequencies: + * [55:53] = modules -1 + * [52:47] = 2's complement push amount, 0 = Feature disabled + */ +# define USBDRD_UCTL_CTL_SSC_REF_CLK_SEL GENMASK(55, 47) +/* Reference clock multiplier for non-standard frequencies: + * 0x19 = 100MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1 + * 0x28 = 125MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1 + * 0x32 = 50MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1 + * Other Values = Reserved + */ +# define USBDRD_UCTL_CTL_MPLL_MULTIPLIER GENMASK(46, 40) +/* Enable reference clock to prescaler for SuperSpeed functionality. + * Should always be set to "1" + */ +# define USBDRD_UCTL_CTL_REF_SSP_EN BIT(39) +/* Divide the reference clock by 2 before entering the + * REF_CLK_FSEL divider: + * If REF_CLK_SEL = 0x0 or 0x1, then only 0x0 is legal + * If REF_CLK_SEL = 0x2 or 0x3, then: + * 0x1 = DLMC_REF_CLK* is 125MHz + * 0x0 = DLMC_REF_CLK* is another supported frequency + */ +# define USBDRD_UCTL_CTL_REF_CLK_DIV2 BIT(38) +/* Select reference clock freqnuency for both PLL blocks: + * 0x27 = REF_CLK_SEL is 0x0 or 0x1 + * 0x07 = REF_CLK_SEL is 0x2 or 0x3 + */ +# define USBDRD_UCTL_CTL_REF_CLK_FSEL GENMASK(37, 32) +/* Controller clock enable. */ +# define USBDRD_UCTL_CTL_H_CLK_EN BIT(30) +/* Select bypass input to controller clock divider: + * 0x0 = Use divided coprocessor clock from H_CLKDIV + * 0x1 = Use clock from GPIO pins + */ +# define USBDRD_UCTL_CTL_H_CLK_BYP_SEL BIT(29) +/* Reset controller clock divider. */ +# define USBDRD_UCTL_CTL_H_CLKDIV_RST BIT(28) +/* Clock divider select: + * 0x0 = divide by 1 + * 0x1 = divide by 2 + * 0x2 = divide by 4 + * 0x3 = divide by 6 + * 0x4 = divide by 8 + * 0x5 = divide by 16 + * 0x6 = divide by 24 + * 0x7 = divide by 32 + */ +# define USBDRD_UCTL_CTL_H_CLKDIV_SEL GENMASK(26, 24) +/* USB3 port permanently attached: 0x0 = No, 0x1 = Yes */ +# define USBDRD_UCTL_CTL_USB3_PORT_PERM_ATTACH BIT(21) +/* USB2 port permanently attached: 0x0 = No, 0x1 = Yes */ +# define USBDRD_UCTL_CTL_USB2_PORT_PERM_ATTACH BIT(20) +/* Disable SuperSpeed PHY: 0x0 = No, 0x1 = Yes */ +# define USBDRD_UCTL_CTL_USB3_PORT_DISABLE BIT(18) +/* Disable HighSpeed PHY: 0x0 = No, 0x1 = Yes */ +# define USBDRD_UCTL_CTL_USB2_PORT_DISABLE BIT(16) +/* Enable PHY SuperSpeed block power: 0x0 = No, 0x1 = Yes */ +# define USBDRD_UCTL_CTL_SS_POWER_EN BIT(14) +/* Enable PHY HighSpeed block power: 0x0 = No, 0x1 = Yes */ +# define USBDRD_UCTL_CTL_HS_POWER_EN BIT(12) +/* Enable USB UCTL interface clock: 0xx = No, 0x1 = Yes */ +# define USBDRD_UCTL_CTL_CSCLK_EN BIT(4) +/* Controller mode: 0x0 = Host, 0x1 = Device */ +# define USBDRD_UCTL_CTL_DRD_MODE BIT(3) +/* PHY reset */ +# define USBDRD_UCTL_CTL_UPHY_RST BIT(2) +/* Software reset UAHC */ +# define USBDRD_UCTL_CTL_UAHC_RST BIT(1) +/* Software resets UCTL */ +# define USBDRD_UCTL_CTL_UCTL_RST BIT(0) + +#define USBDRD_UCTL_BIST_STATUS 0x08 +#define USBDRD_UCTL_SPARE0 0x10 +#define USBDRD_UCTL_INTSTAT 0x30 +#define USBDRD_UCTL_PORT_CFG_HS(port) (0x40 + (0x20 * port)) +#define USBDRD_UCTL_PORT_CFG_SS(port) (0x48 + (0x20 * port)) +#define USBDRD_UCTL_PORT_CR_DBG_CFG(port) (0x50 + (0x20 * port)) +#define USBDRD_UCTL_PORT_CR_DBG_STATUS(port) (0x58 + (0x20 * port)) -/* USB Control Register */ -union cvm_usbdrd_uctl_ctl { - uint64_t u64; - struct cvm_usbdrd_uctl_ctl_s { - /* 1 = BIST and set all USB RAMs to 0x0, 0 = BIST */ - __BITFIELD_FIELD(uint64_t clear_bist:1, - /* 1 = Start BIST and cleared by hardware */ - __BITFIELD_FIELD(uint64_t start_bist:1, - /* Reference clock select for SuperSpeed and HighSpeed PLLs: - * 0x0 = Both PLLs use DLMC_REF_CLK0 for reference clock - * 0x1 = Both PLLs use DLMC_REF_CLK1 for reference clock - * 0x2 = SuperSpeed PLL uses DLMC_REF_CLK0 for reference clock & - * HighSpeed PLL uses PLL_REF_CLK for reference clck - * 0x3 = SuperSpeed PLL uses DLMC_REF_CLK1 for reference clock & - * HighSpeed PLL uses PLL_REF_CLK for reference clck - */ - __BITFIELD_FIELD(uint64_t ref_clk_sel:2, - /* 1 = Spread-spectrum clock enable, 0 = SS clock disable */ - __BITFIELD_FIELD(uint64_t ssc_en:1, - /* Spread-spectrum clock modulation range: - * 0x0 = -4980 ppm downspread - * 0x1 = -4492 ppm downspread - * 0x2 = -4003 ppm downspread - * 0x3 - 0x7 = Reserved - */ - __BITFIELD_FIELD(uint64_t ssc_range:3, - /* Enable non-standard oscillator frequencies: - * [55:53] = modules -1 - * [52:47] = 2's complement push amount, 0 = Feature disabled - */ - __BITFIELD_FIELD(uint64_t ssc_ref_clk_sel:9, - /* Reference clock multiplier for non-standard frequencies: - * 0x19 = 100MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1 - * 0x28 = 125MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1 - * 0x32 = 50MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1 - * Other Values = Reserved - */ - __BITFIELD_FIELD(uint64_t mpll_multiplier:7, - /* Enable reference clock to prescaler for SuperSpeed functionality. - * Should always be set to "1" - */ - __BITFIELD_FIELD(uint64_t ref_ssp_en:1, - /* Divide the reference clock by 2 before entering the - * REF_CLK_FSEL divider: - * If REF_CLK_SEL = 0x0 or 0x1, then only 0x0 is legal - * If REF_CLK_SEL = 0x2 or 0x3, then: - * 0x1 = DLMC_REF_CLK* is 125MHz - * 0x0 = DLMC_REF_CLK* is another supported frequency - */ - __BITFIELD_FIELD(uint64_t ref_clk_div2:1, - /* Select reference clock freqnuency for both PLL blocks: - * 0x27 = REF_CLK_SEL is 0x0 or 0x1 - * 0x07 = REF_CLK_SEL is 0x2 or 0x3 - */ - __BITFIELD_FIELD(uint64_t ref_clk_fsel:6, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_31_31:1, - /* Controller clock enable. */ - __BITFIELD_FIELD(uint64_t h_clk_en:1, - /* Select bypass input to controller clock divider: - * 0x0 = Use divided coprocessor clock from H_CLKDIV - * 0x1 = Use clock from GPIO pins - */ - __BITFIELD_FIELD(uint64_t h_clk_byp_sel:1, - /* Reset controller clock divider. */ - __BITFIELD_FIELD(uint64_t h_clkdiv_rst:1, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_27_27:1, - /* Clock divider select: - * 0x0 = divide by 1 - * 0x1 = divide by 2 - * 0x2 = divide by 4 - * 0x3 = divide by 6 - * 0x4 = divide by 8 - * 0x5 = divide by 16 - * 0x6 = divide by 24 - * 0x7 = divide by 32 - */ - __BITFIELD_FIELD(uint64_t h_clkdiv_sel:3, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_22_23:2, - /* USB3 port permanently attached: 0x0 = No, 0x1 = Yes */ - __BITFIELD_FIELD(uint64_t usb3_port_perm_attach:1, - /* USB2 port permanently attached: 0x0 = No, 0x1 = Yes */ - __BITFIELD_FIELD(uint64_t usb2_port_perm_attach:1, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_19_19:1, - /* Disable SuperSpeed PHY: 0x0 = No, 0x1 = Yes */ - __BITFIELD_FIELD(uint64_t usb3_port_disable:1, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_17_17:1, - /* Disable HighSpeed PHY: 0x0 = No, 0x1 = Yes */ - __BITFIELD_FIELD(uint64_t usb2_port_disable:1, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_15_15:1, - /* Enable PHY SuperSpeed block power: 0x0 = No, 0x1 = Yes */ - __BITFIELD_FIELD(uint64_t ss_power_en:1, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_13_13:1, - /* Enable PHY HighSpeed block power: 0x0 = No, 0x1 = Yes */ - __BITFIELD_FIELD(uint64_t hs_power_en:1, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_5_11:7, - /* Enable USB UCTL interface clock: 0xx = No, 0x1 = Yes */ - __BITFIELD_FIELD(uint64_t csclk_en:1, - /* Controller mode: 0x0 = Host, 0x1 = Device */ - __BITFIELD_FIELD(uint64_t drd_mode:1, - /* PHY reset */ - __BITFIELD_FIELD(uint64_t uphy_rst:1, - /* Software reset UAHC */ - __BITFIELD_FIELD(uint64_t uahc_rst:1, - /* Software resets UCTL */ - __BITFIELD_FIELD(uint64_t uctl_rst:1, - ;))))))))))))))))))))))))))))))))) - } s; -}; - -/* UAHC Configuration Register */ -union cvm_usbdrd_uctl_host_cfg { - uint64_t u64; - struct cvm_usbdrd_uctl_host_cfg_s { - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_60_63:4, - /* Indicates minimum value of all received BELT values */ - __BITFIELD_FIELD(uint64_t host_current_belt:12, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_38_47:10, - /* HS jitter adjustment */ - __BITFIELD_FIELD(uint64_t fla:6, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_29_31:3, - /* Bus-master enable: 0x0 = Disabled (stall DMAs), 0x1 = enabled */ - __BITFIELD_FIELD(uint64_t bme:1, - /* Overcurrent protection enable: 0x0 = unavailable, 0x1 = available */ - __BITFIELD_FIELD(uint64_t oci_en:1, - /* Overcurrent sene selection: - * 0x0 = Overcurrent indication from off-chip is active-low - * 0x1 = Overcurrent indication from off-chip is active-high - */ - __BITFIELD_FIELD(uint64_t oci_active_high_en:1, - /* Port power control enable: 0x0 = unavailable, 0x1 = available */ - __BITFIELD_FIELD(uint64_t ppc_en:1, - /* Port power control sense selection: - * 0x0 = Port power to off-chip is active-low - * 0x1 = Port power to off-chip is active-high - */ - __BITFIELD_FIELD(uint64_t ppc_active_high_en:1, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_0_23:24, - ;))))))))))) - } s; -}; - -/* UCTL Shim Features Register */ -union cvm_usbdrd_uctl_shim_cfg { - uint64_t u64; - struct cvm_usbdrd_uctl_shim_cfg_s { - /* Out-of-bound UAHC register access: 0 = read, 1 = write */ - __BITFIELD_FIELD(uint64_t xs_ncb_oob_wrn:1, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_60_62:3, - /* SRCID error log for out-of-bound UAHC register access: - * [59:58] = chipID - * [57] = Request source: 0 = core, 1 = NCB-device - * [56:51] = Core/NCB-device number, [56] always 0 for NCB devices - * [50:48] = SubID - */ - __BITFIELD_FIELD(uint64_t xs_ncb_oob_osrc:12, - /* Error log for bad UAHC DMA access: 0 = Read log, 1 = Write log */ - __BITFIELD_FIELD(uint64_t xm_bad_dma_wrn:1, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_44_46:3, - /* Encoded error type for bad UAHC DMA */ - __BITFIELD_FIELD(uint64_t xm_bad_dma_type:4, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_13_39:27, - /* Select the IOI read command used by DMA accesses */ - __BITFIELD_FIELD(uint64_t dma_read_cmd:1, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_10_11:2, - /* Select endian format for DMA accesses to the L2c: - * 0x0 = Little endian - *` 0x1 = Big endian - * 0x2 = Reserved - * 0x3 = Reserved - */ - __BITFIELD_FIELD(uint64_t dma_endian_mode:2, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_2_7:6, - /* Select endian format for IOI CSR access to UAHC: - * 0x0 = Little endian - *` 0x1 = Big endian - * 0x2 = Reserved - * 0x3 = Reserved - */ - __BITFIELD_FIELD(uint64_t csr_endian_mode:2, - ;)))))))))))) - } s; -}; +/* + * UCTL Configuration Register + */ +#define USBDRD_UCTL_HOST_CFG 0xe0 +/* Indicates minimum value of all received BELT values */ +# define USBDRD_UCTL_HOST_CFG_HOST_CURRENT_BELT GENMASK(59, 48) +/* HS jitter adjustment */ +# define USBDRD_UCTL_HOST_CFG_FLA GENMASK(37, 32) +/* Bus-master enable: 0x0 = Disabled (stall DMAs), 0x1 = enabled */ +# define USBDRD_UCTL_HOST_CFG_BME BIT(28) +/* Overcurrent protection enable: 0x0 = unavailable, 0x1 = available */ +# define USBDRD_UCTL_HOST_OCI_EN BIT(27) +/* Overcurrent sene selection: + * 0x0 = Overcurrent indication from off-chip is active-low + * 0x1 = Overcurrent indication from off-chip is active-high + */ +# define USBDRD_UCTL_HOST_OCI_ACTIVE_HIGH_EN BIT(26) +/* Port power control enable: 0x0 = unavailable, 0x1 = available */ +# define USBDRD_UCTL_HOST_PPC_EN BIT(25) +/* Port power control sense selection: + * 0x0 = Port power to off-chip is active-low + * 0x1 = Port power to off-chip is active-high + */ +# define USBDRD_UCTL_HOST_PPC_ACTIVE_HIGH_EN BIT(24) + +/* + * UCTL Shim Features Register + */ +#define USBDRD_UCTL_SHIM_CFG 0xe8 +/* Out-of-bound UAHC register access: 0 = read, 1 = write */ +# define USBDRD_UCTL_SHIM_CFG_XS_NCB_OOB_WRN BIT(63) +/* SRCID error log for out-of-bound UAHC register access: + * [59:58] = chipID + * [57] = Request source: 0 = core, 1 = NCB-device + * [56:51] = Core/NCB-device number, [56] always 0 for NCB devices + * [50:48] = SubID + */ +# define USBDRD_UCTL_SHIM_CFG_XS_NCB_OOB_OSRC GENMASK(59, 48) +/* Error log for bad UAHC DMA access: 0 = Read log, 1 = Write log */ +# define USBDRD_UCTL_SHIM_CFG_XM_BAD_DMA_WRN BIT(47) +/* Encoded error type for bad UAHC DMA */ +# define USBDRD_UCTL_SHIM_CFG_XM_BAD_DMA_TYPE GENMASK(43, 40) +/* Select the IOI read command used by DMA accesses */ +# define USBDRD_UCTL_SHIM_CFG_DMA_READ_CMD BIT(12) +/* Select endian format for DMA accesses to the L2C: + * 0x0 = Little endian + * 0x1 = Big endian + * 0x2 = Reserved + * 0x3 = Reserved + */ +# define USBDRD_UCTL_SHIM_CFG_DMA_ENDIAN_MODE GENMASK(9, 8) +/* Select endian format for IOI CSR access to UAHC: + * 0x0 = Little endian + * 0x1 = Big endian + * 0x2 = Reserved + * 0x3 = Reserved + */ +# define USBDRD_UCTL_SHIM_CFG_CSR_ENDIAN_MODE GENMASK(1, 0) -#define OCTEON_H_CLKDIV_SEL 8 -#define OCTEON_MIN_H_CLK_RATE 150000000 -#define OCTEON_MAX_H_CLK_RATE 300000000 +#define USBDRD_UCTL_ECC 0xf0 +#define USBDRD_UCTL_SPARE1 0xf8 static DEFINE_MUTEX(dwc3_octeon_clocks_mutex); -static uint8_t clk_div[OCTEON_H_CLKDIV_SEL] = {1, 2, 4, 6, 8, 16, 24, 32}; +#ifdef CONFIG_CAVIUM_OCTEON_SOC +#include <asm/octeon/octeon.h> +static inline uint64_t dwc3_octeon_readq(void __iomem *addr) +{ + return cvmx_readq_csr(addr); +} -static int dwc3_octeon_config_power(struct device *dev, u64 base) +static inline void dwc3_octeon_writeq(void __iomem *base, uint64_t val) +{ + cvmx_writeq_csr(base, val); +} + +static void dwc3_octeon_config_gpio(int index, int gpio) { -#define UCTL_HOST_CFG 0xe0 - union cvm_usbdrd_uctl_host_cfg uctl_host_cfg; union cvmx_gpio_bit_cfgx gpio_bit; + + if ((OCTEON_IS_MODEL(OCTEON_CN73XX) || + OCTEON_IS_MODEL(OCTEON_CNF75XX)) + && gpio <= 31) { + gpio_bit.u64 = cvmx_read_csr(CVMX_GPIO_BIT_CFGX(gpio)); + gpio_bit.s.tx_oe = 1; + gpio_bit.s.output_sel = (index == 0 ? 0x14 : 0x15); + cvmx_write_csr(CVMX_GPIO_BIT_CFGX(gpio), gpio_bit.u64); + } else if (gpio <= 15) { + gpio_bit.u64 = cvmx_read_csr(CVMX_GPIO_BIT_CFGX(gpio)); + gpio_bit.s.tx_oe = 1; + gpio_bit.s.output_sel = (index == 0 ? 0x14 : 0x19); + cvmx_write_csr(CVMX_GPIO_BIT_CFGX(gpio), gpio_bit.u64); + } else { + gpio_bit.u64 = cvmx_read_csr(CVMX_GPIO_XBIT_CFGX(gpio)); + gpio_bit.s.tx_oe = 1; + gpio_bit.s.output_sel = (index == 0 ? 0x14 : 0x19); + cvmx_write_csr(CVMX_GPIO_XBIT_CFGX(gpio), gpio_bit.u64); + } +} +#else +static inline uint64_t dwc3_octeon_readq(void __iomem *addr) +{ + return 0; +} + +static inline void dwc3_octeon_writeq(void __iomem *base, uint64_t val) { } + +static inline void dwc3_octeon_config_gpio(int index, int gpio) { } +#endif + +static int dwc3_octeon_get_divider(void) +{ + static const uint8_t clk_div[] = { 1, 2, 4, 6, 8, 16, 24, 32 }; + int div = 0; + + while (div < ARRAY_SIZE(clk_div)) { + uint64_t rate = octeon_get_io_clock_rate() / clk_div[div]; + if (rate <= 300000000 && rate >= 150000000) + break; + div++; + } + + return div; +} + +static int dwc3_octeon_config_power(struct device *dev, void __iomem *base) +{ uint32_t gpio_pwr[3]; int gpio, len, power_active_low; struct device_node *node = dev->of_node; - int index = (base >> 24) & 1; + u64 val; + void __iomem *uctl_host_cfg_reg = base + USBDRD_UCTL_HOST_CFG; if (of_find_property(node, "power", &len) != NULL) { if (len == 12) { @@ -248,51 +271,33 @@ static int dwc3_octeon_config_power(struct device *dev, u64 base) dev_err(dev, "invalid power configuration\n"); return -EINVAL; } - if ((OCTEON_IS_MODEL(OCTEON_CN73XX) || - OCTEON_IS_MODEL(OCTEON_CNF75XX)) - && gpio <= 31) { - gpio_bit.u64 = cvmx_read_csr(CVMX_GPIO_BIT_CFGX(gpio)); - gpio_bit.s.tx_oe = 1; - gpio_bit.s.output_sel = (index == 0 ? 0x14 : 0x15); - cvmx_write_csr(CVMX_GPIO_BIT_CFGX(gpio), gpio_bit.u64); - } else if (gpio <= 15) { - gpio_bit.u64 = cvmx_read_csr(CVMX_GPIO_BIT_CFGX(gpio)); - gpio_bit.s.tx_oe = 1; - gpio_bit.s.output_sel = (index == 0 ? 0x14 : 0x19); - cvmx_write_csr(CVMX_GPIO_BIT_CFGX(gpio), gpio_bit.u64); - } else { - gpio_bit.u64 = cvmx_read_csr(CVMX_GPIO_XBIT_CFGX(gpio)); - gpio_bit.s.tx_oe = 1; - gpio_bit.s.output_sel = (index == 0 ? 0x14 : 0x19); - cvmx_write_csr(CVMX_GPIO_XBIT_CFGX(gpio), gpio_bit.u64); - } + dwc3_octeon_config_gpio(((u64)base >> 24) & 1, gpio); /* Enable XHCI power control and set if active high or low. */ - uctl_host_cfg.u64 = cvmx_read_csr(base + UCTL_HOST_CFG); - uctl_host_cfg.s.ppc_en = 1; - uctl_host_cfg.s.ppc_active_high_en = !power_active_low; - cvmx_write_csr(base + UCTL_HOST_CFG, uctl_host_cfg.u64); + val = dwc3_octeon_readq(uctl_host_cfg_reg); + val |= USBDRD_UCTL_HOST_PPC_EN; + if (power_active_low) + val &= ~USBDRD_UCTL_HOST_PPC_ACTIVE_HIGH_EN; + else + val |= USBDRD_UCTL_HOST_PPC_ACTIVE_HIGH_EN; + dwc3_octeon_writeq(uctl_host_cfg_reg, val); } else { /* Disable XHCI power control and set if active high. */ - uctl_host_cfg.u64 = cvmx_read_csr(base + UCTL_HOST_CFG); - uctl_host_cfg.s.ppc_en = 0; - uctl_host_cfg.s.ppc_active_high_en = 0; - cvmx_write_csr(base + UCTL_HOST_CFG, uctl_host_cfg.u64); + val = dwc3_octeon_readq(uctl_host_cfg_reg); + val &= ~USBDRD_UCTL_HOST_PPC_EN; + val &= ~USBDRD_UCTL_HOST_PPC_ACTIVE_HIGH_EN; + dwc3_octeon_writeq(uctl_host_cfg_reg, val); dev_info(dev, "power control disabled\n"); } return 0; } -static int dwc3_octeon_clocks_start(struct device *dev, u64 base) +static int dwc3_octeon_clocks_start(struct device *dev, void __iomem *base) { - union cvm_usbdrd_uctl_ctl uctl_ctl; - int ref_clk_sel = 2; - u64 div; + int i, div, mpll_mul, ref_clk_fsel, ref_clk_sel = 2; u32 clock_rate; - int mpll_mul; - int i; - u64 h_clk_rate; - u64 uctl_ctl_reg = base; + u64 val; + void __iomem *uctl_ctl_reg = base + USBDRD_UCTL_CTL; if (dev->of_node) { const char *ss_clock_type; @@ -356,44 +361,42 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base) /* Step 2: Select GPIO for overcurrent indication, if desired. SKIP */ /* Step 3: Assert all resets. */ - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.uphy_rst = 1; - uctl_ctl.s.uahc_rst = 1; - uctl_ctl.s.uctl_rst = 1; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + val = dwc3_octeon_readq(uctl_ctl_reg); + val |= USBDRD_UCTL_CTL_UPHY_RST | + USBDRD_UCTL_CTL_UAHC_RST | + USBDRD_UCTL_CTL_UCTL_RST; + dwc3_octeon_writeq(uctl_ctl_reg, val); /* Step 4a: Reset the clock dividers. */ - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.h_clkdiv_rst = 1; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + val = dwc3_octeon_readq(uctl_ctl_reg); + val |= USBDRD_UCTL_CTL_H_CLKDIV_RST; + dwc3_octeon_writeq(uctl_ctl_reg, val); /* Step 4b: Select controller clock frequency. */ - for (div = 0; div < OCTEON_H_CLKDIV_SEL; div++) { - h_clk_rate = octeon_get_io_clock_rate() / clk_div[div]; - if (h_clk_rate <= OCTEON_MAX_H_CLK_RATE && - h_clk_rate >= OCTEON_MIN_H_CLK_RATE) - break; - } - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.h_clkdiv_sel = div; - uctl_ctl.s.h_clk_en = 1; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - if ((div != uctl_ctl.s.h_clkdiv_sel) || (!uctl_ctl.s.h_clk_en)) { + div = dwc3_octeon_get_divider(); + val = dwc3_octeon_readq(uctl_ctl_reg); + val &= ~USBDRD_UCTL_CTL_H_CLKDIV_SEL; + val |= FIELD_PREP(USBDRD_UCTL_CTL_H_CLKDIV_SEL, div); + val |= USBDRD_UCTL_CTL_H_CLK_EN; + dwc3_octeon_writeq(uctl_ctl_reg, val); + val = dwc3_octeon_readq(uctl_ctl_reg); + if ((div != FIELD_GET(USBDRD_UCTL_CTL_H_CLKDIV_SEL, val)) || + (!(FIELD_GET(USBDRD_UCTL_CTL_H_CLK_EN, val)))) { dev_err(dev, "dwc3 controller clock init failure.\n"); return -EINVAL; } /* Step 4c: Deassert the controller clock divider reset. */ - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.h_clkdiv_rst = 0; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + val &= ~USBDRD_UCTL_CTL_H_CLKDIV_RST; + dwc3_octeon_writeq(uctl_ctl_reg, val); /* Step 5a: Reference clock configuration. */ - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.ref_clk_sel = ref_clk_sel; - uctl_ctl.s.ref_clk_fsel = 0x07; - uctl_ctl.s.ref_clk_div2 = 0; + val = dwc3_octeon_readq(uctl_ctl_reg); + val &= ~USBDRD_UCTL_CTL_REF_CLK_DIV2; + val &= ~USBDRD_UCTL_CTL_REF_CLK_SEL; + val |= FIELD_PREP(USBDRD_UCTL_CTL_REF_CLK_SEL, ref_clk_sel); + + ref_clk_fsel = 0x07; switch (clock_rate) { default: dev_warn(dev, "Invalid ref_clk %u, using 100000000 instead\n", @@ -402,7 +405,7 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base) case 100000000: mpll_mul = 0x19; if (ref_clk_sel < 2) - uctl_ctl.s.ref_clk_fsel = 0x27; + ref_clk_fsel = 0x27; break; case 50000000: mpll_mul = 0x32; @@ -411,28 +414,32 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base) mpll_mul = 0x28; break; } - uctl_ctl.s.mpll_multiplier = mpll_mul; + val &= ~USBDRD_UCTL_CTL_REF_CLK_FSEL; + val |= FIELD_PREP(USBDRD_UCTL_CTL_REF_CLK_FSEL, ref_clk_fsel); + + val &= ~USBDRD_UCTL_CTL_MPLL_MULTIPLIER; + val |= FIELD_PREP(USBDRD_UCTL_CTL_MPLL_MULTIPLIER, mpll_mul); /* Step 5b: Configure and enable spread-spectrum for SuperSpeed. */ - uctl_ctl.s.ssc_en = 1; + val |= USBDRD_UCTL_CTL_SSC_EN; /* Step 5c: Enable SuperSpeed. */ - uctl_ctl.s.ref_ssp_en = 1; + val |= USBDRD_UCTL_CTL_REF_SSP_EN; /* Step 5d: Configure PHYs. SKIP */ /* Step 6a & 6b: Power up PHYs. */ - uctl_ctl.s.hs_power_en = 1; - uctl_ctl.s.ss_power_en = 1; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + val |= USBDRD_UCTL_CTL_HS_POWER_EN; + val |= USBDRD_UCTL_CTL_SS_POWER_EN; + dwc3_octeon_writeq(uctl_ctl_reg, val); /* Step 7: Wait 10 controller-clock cycles to take effect. */ udelay(10); /* Step 8a: Deassert UCTL reset signal. */ - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.uctl_rst = 0; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + val = dwc3_octeon_readq(uctl_ctl_reg); + val &= ~USBDRD_UCTL_CTL_UCTL_RST; + dwc3_octeon_writeq(uctl_ctl_reg, val); /* Step 8b: Wait 10 controller-clock cycles. */ udelay(10); @@ -442,53 +449,49 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base) return -EINVAL; /* Step 8d: Deassert UAHC reset signal. */ - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.uahc_rst = 0; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + val = dwc3_octeon_readq(uctl_ctl_reg); + val &= ~USBDRD_UCTL_CTL_UAHC_RST; + dwc3_octeon_writeq(uctl_ctl_reg, val); /* Step 8e: Wait 10 controller-clock cycles. */ udelay(10); /* Step 9: Enable conditional coprocessor clock of UCTL. */ - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.csclk_en = 1; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + val = dwc3_octeon_readq(uctl_ctl_reg); + val |= USBDRD_UCTL_CTL_CSCLK_EN; + dwc3_octeon_writeq(uctl_ctl_reg, val); /*Step 10: Set for host mode only. */ - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.drd_mode = 0; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + val = dwc3_octeon_readq(uctl_ctl_reg); + val &= ~USBDRD_UCTL_CTL_DRD_MODE; + dwc3_octeon_writeq(uctl_ctl_reg, val); return 0; } -static void __init dwc3_octeon_set_endian_mode(u64 base) +static void __init dwc3_octeon_set_endian_mode(void __iomem *base) { -#define UCTL_SHIM_CFG 0xe8 - union cvm_usbdrd_uctl_shim_cfg shim_cfg; + u64 val; + void __iomem *uctl_shim_cfg_reg = base + USBDRD_UCTL_SHIM_CFG; - shim_cfg.u64 = cvmx_read_csr(base + UCTL_SHIM_CFG); + val = dwc3_octeon_readq(uctl_shim_cfg_reg); + val &= ~USBDRD_UCTL_SHIM_CFG_DMA_ENDIAN_MODE; + val &= ~USBDRD_UCTL_SHIM_CFG_CSR_ENDIAN_MODE; #ifdef __BIG_ENDIAN - shim_cfg.s.dma_endian_mode = 1; - shim_cfg.s.csr_endian_mode = 1; -#else - shim_cfg.s.dma_endian_mode = 0; - shim_cfg.s.csr_endian_mode = 0; + val |= FIELD_PREP(USBDRD_UCTL_SHIM_CFG_DMA_ENDIAN_MODE, 1); + val |= FIELD_PREP(USBDRD_UCTL_SHIM_CFG_CSR_ENDIAN_MODE, 1); #endif - cvmx_write_csr(base + UCTL_SHIM_CFG, shim_cfg.u64); + dwc3_octeon_writeq(uctl_shim_cfg_reg, val); } -#define CVMX_USBDRDX_UCTL_CTL(index) \ - (CVMX_ADD_IO_SEG(0x0001180068000000ull) + \ - ((index & 1) * 0x1000000ull)) -static void __init dwc3_octeon_phy_reset(u64 base) +static void __init dwc3_octeon_phy_reset(void __iomem *base) { - union cvm_usbdrd_uctl_ctl uctl_ctl; - int index = (base >> 24) & 1; + u64 val; + void __iomem *uctl_ctl_reg = base + USBDRD_UCTL_CTL; - uctl_ctl.u64 = cvmx_read_csr(CVMX_USBDRDX_UCTL_CTL(index)); - uctl_ctl.s.uphy_rst = 0; - cvmx_write_csr(CVMX_USBDRDX_UCTL_CTL(index), uctl_ctl.u64); + val = dwc3_octeon_readq(uctl_ctl_reg); + val &= ~USBDRD_UCTL_CTL_UPHY_RST; + dwc3_octeon_writeq(uctl_ctl_reg, val); } static int __init dwc3_octeon_device_init(void) @@ -527,10 +530,10 @@ static int __init dwc3_octeon_device_init(void) } mutex_lock(&dwc3_octeon_clocks_mutex); - if (dwc3_octeon_clocks_start(&pdev->dev, (u64)base) == 0) + if (dwc3_octeon_clocks_start(&pdev->dev, base) == 0) dev_info(&pdev->dev, "clocks initialized.\n"); - dwc3_octeon_set_endian_mode((u64)base); - dwc3_octeon_phy_reset((u64)base); + dwc3_octeon_set_endian_mode(base); + dwc3_octeon_phy_reset(base); mutex_unlock(&dwc3_octeon_clocks_mutex); devm_iounmap(&pdev->dev, base); devm_release_mem_region(&pdev->dev, res->start, |