summaryrefslogtreecommitdiff
path: root/arch/mips/kernel/head.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/kernel/head.S')
-rw-r--r--arch/mips/kernel/head.S92
1 files changed, 28 insertions, 64 deletions
diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
index 099912324423..d99ed58b7043 100644
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -21,7 +21,6 @@
#include <asm/asmmacro.h>
#include <asm/irqflags.h>
#include <asm/regdef.h>
-#include <asm/pgtable-bits.h>
#include <asm/mipsregs.h>
#include <asm/stackframe.h>
@@ -35,33 +34,12 @@
*/
.macro setup_c0_status set clr
.set push
-#ifdef CONFIG_MIPS_MT_SMTC
- /*
- * For SMTC, we need to set privilege and disable interrupts only for
- * the current TC, using the TCStatus register.
- */
- mfc0 t0, CP0_TCSTATUS
- /* Fortunately CU 0 is in the same place in both registers */
- /* Set TCU0, TMX, TKSU (for later inversion) and IXMT */
- li t1, ST0_CU0 | 0x08001c00
- or t0, t1
- /* Clear TKSU, leave IXMT */
- xori t0, 0x00001800
- mtc0 t0, CP0_TCSTATUS
- _ehb
- /* We need to leave the global IE bit set, but clear EXL...*/
- mfc0 t0, CP0_STATUS
- or t0, ST0_CU0 | ST0_EXL | ST0_ERL | \set | \clr
- xor t0, ST0_EXL | ST0_ERL | \clr
- mtc0 t0, CP0_STATUS
-#else
mfc0 t0, CP0_STATUS
- or t0, ST0_CU0|\set|0x1f|\clr
+ or t0, ST0_KERNEL_CUMASK|\set|0x1f|\clr
xor t0, 0x1f|\clr
mtc0 t0, CP0_STATUS
.set noreorder
sll zero,3 # ehb
-#endif
.set pop
.endm
@@ -81,6 +59,8 @@
#endif
.endm
+ __HEAD
+
#ifndef CONFIG_NO_EXCEPT_FILL
/*
* Reserved space for exception handlers.
@@ -99,7 +79,7 @@ EXPORT(_stext)
*/
FEXPORT(__kernel_entry)
j kernel_entry
-#endif
+#endif /* CONFIG_BOOT_RAW */
__REF
@@ -115,24 +95,6 @@ NESTED(kernel_entry, 16, sp) # kernel entry point
jr t0
0:
-#ifdef CONFIG_MIPS_MT_SMTC
- /*
- * In SMTC kernel, "CLI" is thread-specific, in TCStatus.
- * We still need to enable interrupts globally in Status,
- * and clear EXL/ERL.
- *
- * TCContext is used to track interrupt levels under
- * service in SMTC kernel. Clear for boot TC before
- * allowing any interrupts.
- */
- mtc0 zero, CP0_TCCONTEXT
-
- mfc0 t0, CP0_STATUS
- ori t0, t0, 0xff1f
- xori t0, t0, 0x001e
- mtc0 t0, CP0_STATUS
-#endif /* CONFIG_MIPS_MT_SMTC */
-
PTR_LA t0, __bss_start # clear .bss
LONG_S zero, (t0)
PTR_LA t1, __bss_stop - LONGSIZE
@@ -147,6 +109,9 @@ NESTED(kernel_entry, 16, sp) # kernel entry point
LONG_S a3, fw_arg3
MTC0 zero, CP0_CONTEXT # clear context register
+#ifdef CONFIG_64BIT
+ MTC0 zero, CP0_XCONTEXT
+#endif
PTR_LA $28, init_thread_union
/* Set the SP after an empty pt_regs. */
PTR_LI sp, _THREAD_SIZE - 32 - PT_SIZE
@@ -155,38 +120,37 @@ NESTED(kernel_entry, 16, sp) # kernel entry point
set_saved_sp sp, t0, t1
PTR_SUBU sp, 4 * SZREG # init stack pointer
+#ifdef CONFIG_RELOCATABLE
+ /* Copy kernel and apply the relocations */
+ jal relocate_kernel
+
+ /* Repoint the sp into the new kernel image */
+ PTR_LI sp, _THREAD_SIZE - 32 - PT_SIZE
+ PTR_ADDU sp, $28
+ set_saved_sp sp, t0, t1
+ PTR_SUBU sp, 4 * SZREG # init stack pointer
+
+ /*
+ * relocate_kernel returns the entry point either
+ * in the relocated kernel or the original if for
+ * some reason relocation failed - jump there now
+ * with instruction hazard barrier because of the
+ * newly sync'd icache.
+ */
+ jr.hb v0
+#else /* !CONFIG_RELOCATABLE */
j start_kernel
+#endif /* !CONFIG_RELOCATABLE */
END(kernel_entry)
- __CPUINIT
-
#ifdef CONFIG_SMP
/*
* SMP slave cpus entry point. Board specific code for bootstrap calls this
* function after setting up the stack and gp registers.
*/
NESTED(smp_bootstrap, 16, sp)
-#ifdef CONFIG_MIPS_MT_SMTC
- /*
- * Read-modify-writes of Status must be atomic, and this
- * is one case where CLI is invoked without EXL being
- * necessarily set. The CLI and setup_c0_status will
- * in fact be redundant for all but the first TC of
- * each VPE being booted.
- */
- DMT 10 # dmt t2 /* t0, t1 are used by CLI and setup_c0_status() */
- jal mips_ihb
-#endif /* CONFIG_MIPS_MT_SMTC */
- setup_c0_status_sec
smp_slave_setup
-#ifdef CONFIG_MIPS_MT_SMTC
- andi t2, t2, VPECONTROL_TE
- beqz t2, 2f
- EMT # emt
-2:
-#endif /* CONFIG_MIPS_MT_SMTC */
+ setup_c0_status_sec
j start_secondary
END(smp_bootstrap)
#endif /* CONFIG_SMP */
-
- __FINIT