diff options
Diffstat (limited to 'arch/mips/kernel/r4k_switch.S')
| -rw-r--r-- | arch/mips/kernel/r4k_switch.S | 198 |
1 files changed, 3 insertions, 195 deletions
diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S index 921238a6bd26..58232ae6cfae 100644 --- a/arch/mips/kernel/r4k_switch.S +++ b/arch/mips/kernel/r4k_switch.S @@ -12,10 +12,8 @@ */ #include <asm/asm.h> #include <asm/cachectl.h> -#include <asm/fpregdef.h> #include <asm/mipsregs.h> #include <asm/asm-offsets.h> -#include <asm/pgtable-bits.h> #include <asm/regdef.h> #include <asm/stackframe.h> #include <asm/thread_info.h> @@ -23,24 +21,8 @@ #include <asm/asmmacro.h> /* - * Offset to the current process status flags, the first 32 bytes of the - * stack are not used. - */ -#define ST_OFF (_THREAD_SIZE - 32 - PT_SIZE + PT_STATUS) - -/* - * FPU context is saved iff the process has used it's FPU in the current - * time slice as indicated by _TIF_USEDFPU. In any case, the CU1 bit for user - * space STATUS register should be 0, so that a process *always* starts its - * userland with FPU disabled after each context switch. - * - * FPU will be enabled as soon as the process accesses FPU again, through - * do_cpu() trap. - */ - -/* * task_struct *resume(task_struct *prev, task_struct *next, - * struct thread_info *next_ti, int usedfpu) + * struct thread_info *next_ti) */ .align 5 LEAF(resume) @@ -49,27 +31,8 @@ cpu_save_nonscratch a0 LONG_S ra, THREAD_REG31(a0) - /* - * check if we need to save FPU registers - */ - - beqz a3, 1f - - PTR_L t3, TASK_THREAD_INFO(a0) - /* - * clear saved user stack CU1 bit - */ - LONG_L t0, ST_OFF(t3) - li t1, ~ST0_CU1 - and t0, t0, t1 - LONG_S t0, ST_OFF(t3) - - fpu_save_double a0 t0 t1 # c0_status passed in t0 - # clobbers t1 -1: - -#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP) - PTR_L t8, __stack_chk_guard +#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP) + PTR_LA t8, __stack_chk_guard LONG_L t9, TASK_STACK_CANARY(a1) LONG_S t9, 0(t8) #endif @@ -83,18 +46,6 @@ PTR_ADDU t0, $28, _THREAD_SIZE - 32 set_saved_sp t0, t1, t2 -#ifdef CONFIG_MIPS_MT_SMTC - /* Read-modify-writes of Status must be atomic on a VPE */ - mfc0 t2, CP0_TCSTATUS - ori t1, t2, TCSTATUS_IXMT - mtc0 t1, CP0_TCSTATUS - andi t2, t2, TCSTATUS_IXMT - _ehb - DMT 8 # dmt t0 - move t1,ra - jal mips_ihb - move ra,t1 -#endif /* CONFIG_MIPS_MT_SMTC */ mfc0 t1, CP0_STATUS /* Do we really need this? */ li a3, 0xff01 and t1, a3 @@ -103,149 +54,6 @@ and a2, a3 or a2, t1 mtc0 a2, CP0_STATUS -#ifdef CONFIG_MIPS_MT_SMTC - _ehb - andi t0, t0, VPECONTROL_TE - beqz t0, 1f - emt -1: - mfc0 t1, CP0_TCSTATUS - xori t1, t1, TCSTATUS_IXMT - or t1, t1, t2 - mtc0 t1, CP0_TCSTATUS - _ehb -#endif /* CONFIG_MIPS_MT_SMTC */ move v0, a0 jr ra END(resume) - -/* - * Save a thread's fp context. - */ -LEAF(_save_fp) -#ifdef CONFIG_64BIT - mfc0 t0, CP0_STATUS -#endif - fpu_save_double a0 t0 t1 # clobbers t1 - jr ra - END(_save_fp) - -/* - * Restore a thread's fp context. - */ -LEAF(_restore_fp) -#ifdef CONFIG_64BIT - mfc0 t0, CP0_STATUS -#endif - fpu_restore_double a0 t0 t1 # clobbers t1 - jr ra - END(_restore_fp) - -/* - * Load the FPU with signalling NANS. This bit pattern we're using has - * the property that no matter whether considered as single or as double - * precision represents signaling NANS. - * - * We initialize fcr31 to rounding to nearest, no exceptions. - */ - -#define FPU_DEFAULT 0x00000000 - -LEAF(_init_fpu) -#ifdef CONFIG_MIPS_MT_SMTC - /* Rather than manipulate per-VPE Status, set per-TC bit in TCStatus */ - mfc0 t0, CP0_TCSTATUS - /* Bit position is the same for Status, TCStatus */ - li t1, ST0_CU1 - or t0, t1 - mtc0 t0, CP0_TCSTATUS -#else /* Normal MIPS CU1 enable */ - mfc0 t0, CP0_STATUS - li t1, ST0_CU1 - or t0, t1 - mtc0 t0, CP0_STATUS -#endif /* CONFIG_MIPS_MT_SMTC */ - enable_fpu_hazard - - li t1, FPU_DEFAULT - ctc1 t1, fcr31 - - li t1, -1 # SNaN - -#ifdef CONFIG_64BIT - sll t0, t0, 5 - bgez t0, 1f # 16 / 32 register mode? - - dmtc1 t1, $f1 - dmtc1 t1, $f3 - dmtc1 t1, $f5 - dmtc1 t1, $f7 - dmtc1 t1, $f9 - dmtc1 t1, $f11 - dmtc1 t1, $f13 - dmtc1 t1, $f15 - dmtc1 t1, $f17 - dmtc1 t1, $f19 - dmtc1 t1, $f21 - dmtc1 t1, $f23 - dmtc1 t1, $f25 - dmtc1 t1, $f27 - dmtc1 t1, $f29 - dmtc1 t1, $f31 -1: -#endif - -#ifdef CONFIG_CPU_MIPS32 - mtc1 t1, $f0 - mtc1 t1, $f1 - mtc1 t1, $f2 - mtc1 t1, $f3 - mtc1 t1, $f4 - mtc1 t1, $f5 - mtc1 t1, $f6 - mtc1 t1, $f7 - mtc1 t1, $f8 - mtc1 t1, $f9 - mtc1 t1, $f10 - mtc1 t1, $f11 - mtc1 t1, $f12 - mtc1 t1, $f13 - mtc1 t1, $f14 - mtc1 t1, $f15 - mtc1 t1, $f16 - mtc1 t1, $f17 - mtc1 t1, $f18 - mtc1 t1, $f19 - mtc1 t1, $f20 - mtc1 t1, $f21 - mtc1 t1, $f22 - mtc1 t1, $f23 - mtc1 t1, $f24 - mtc1 t1, $f25 - mtc1 t1, $f26 - mtc1 t1, $f27 - mtc1 t1, $f28 - mtc1 t1, $f29 - mtc1 t1, $f30 - mtc1 t1, $f31 -#else - .set mips3 - dmtc1 t1, $f0 - dmtc1 t1, $f2 - dmtc1 t1, $f4 - dmtc1 t1, $f6 - dmtc1 t1, $f8 - dmtc1 t1, $f10 - dmtc1 t1, $f12 - dmtc1 t1, $f14 - dmtc1 t1, $f16 - dmtc1 t1, $f18 - dmtc1 t1, $f20 - dmtc1 t1, $f22 - dmtc1 t1, $f24 - dmtc1 t1, $f26 - dmtc1 t1, $f28 - dmtc1 t1, $f30 -#endif - jr ra - END(_init_fpu) |