diff options
Diffstat (limited to 'arch/mips/ralink/mt7620.c')
| -rw-r--r-- | arch/mips/ralink/mt7620.c | 378 |
1 files changed, 118 insertions, 260 deletions
diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c index ae1fa0391c88..672249a13a09 100644 --- a/arch/mips/ralink/mt7620.c +++ b/arch/mips/ralink/mt7620.c @@ -11,6 +11,8 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/bug.h> +#include <linux/slab.h> +#include <linux/sys_soc.h> #include <asm/mipsregs.h> #include <asm/mach-ralink/ralink_regs.h> @@ -34,12 +36,6 @@ #define PMU1_CFG 0x8C #define DIG_SW_SEL BIT(25) -/* clock scaling */ -#define CLKCFG_FDIV_MASK 0x1f00 -#define CLKCFG_FDIV_USB_VAL 0x0300 -#define CLKCFG_FFRAC_MASK 0x001f -#define CLKCFG_FFRAC_USB_VAL 0x0003 - /* EFUSE bits */ #define EFUSE_MT7688 0x100000 @@ -49,234 +45,7 @@ /* does the board have sdram or ddram */ static int dram_type; -static __init u32 -mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div) -{ - u64 t; - - t = ref_rate; - t *= mul; - do_div(t, div); - - return t; -} - -#define MHZ(x) ((x) * 1000 * 1000) - -static __init unsigned long -mt7620_get_xtal_rate(void) -{ - u32 reg; - - reg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0); - if (reg & SYSCFG0_XTAL_FREQ_SEL) - return MHZ(40); - - return MHZ(20); -} - -static __init unsigned long -mt7620_get_periph_rate(unsigned long xtal_rate) -{ - u32 reg; - - reg = rt_sysc_r32(SYSC_REG_CLKCFG0); - if (reg & CLKCFG0_PERI_CLK_SEL) - return xtal_rate; - - return MHZ(40); -} - -static const u32 mt7620_clk_divider[] __initconst = { 2, 3, 4, 8 }; - -static __init unsigned long -mt7620_get_cpu_pll_rate(unsigned long xtal_rate) -{ - u32 reg; - u32 mul; - u32 div; - - reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0); - if (reg & CPLL_CFG0_BYPASS_REF_CLK) - return xtal_rate; - - if ((reg & CPLL_CFG0_SW_CFG) == 0) - return MHZ(600); - - mul = (reg >> CPLL_CFG0_PLL_MULT_RATIO_SHIFT) & - CPLL_CFG0_PLL_MULT_RATIO_MASK; - mul += 24; - if (reg & CPLL_CFG0_LC_CURFCK) - mul *= 2; - - div = (reg >> CPLL_CFG0_PLL_DIV_RATIO_SHIFT) & - CPLL_CFG0_PLL_DIV_RATIO_MASK; - - WARN_ON(div >= ARRAY_SIZE(mt7620_clk_divider)); - - return mt7620_calc_rate(xtal_rate, mul, mt7620_clk_divider[div]); -} - -static __init unsigned long -mt7620_get_pll_rate(unsigned long xtal_rate, unsigned long cpu_pll_rate) -{ - u32 reg; - - reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1); - if (reg & CPLL_CFG1_CPU_AUX1) - return xtal_rate; - - if (reg & CPLL_CFG1_CPU_AUX0) - return MHZ(480); - - return cpu_pll_rate; -} - -static __init unsigned long -mt7620_get_cpu_rate(unsigned long pll_rate) -{ - u32 reg; - u32 mul; - u32 div; - - reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG); - - mul = reg & CPU_SYS_CLKCFG_CPU_FFRAC_MASK; - div = (reg >> CPU_SYS_CLKCFG_CPU_FDIV_SHIFT) & - CPU_SYS_CLKCFG_CPU_FDIV_MASK; - - return mt7620_calc_rate(pll_rate, mul, div); -} - -static const u32 mt7620_ocp_dividers[16] __initconst = { - [CPU_SYS_CLKCFG_OCP_RATIO_2] = 2, - [CPU_SYS_CLKCFG_OCP_RATIO_3] = 3, - [CPU_SYS_CLKCFG_OCP_RATIO_4] = 4, - [CPU_SYS_CLKCFG_OCP_RATIO_5] = 5, - [CPU_SYS_CLKCFG_OCP_RATIO_10] = 10, -}; - -static __init unsigned long -mt7620_get_dram_rate(unsigned long pll_rate) -{ - if (dram_type == SYSCFG0_DRAM_TYPE_SDRAM) - return pll_rate / 4; - - return pll_rate / 3; -} - -static __init unsigned long -mt7620_get_sys_rate(unsigned long cpu_rate) -{ - u32 reg; - u32 ocp_ratio; - u32 div; - - reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG); - - ocp_ratio = (reg >> CPU_SYS_CLKCFG_OCP_RATIO_SHIFT) & - CPU_SYS_CLKCFG_OCP_RATIO_MASK; - - if (WARN_ON(ocp_ratio >= ARRAY_SIZE(mt7620_ocp_dividers))) - return cpu_rate; - - div = mt7620_ocp_dividers[ocp_ratio]; - if (WARN(!div, "invalid divider for OCP ratio %u", ocp_ratio)) - return cpu_rate; - - return cpu_rate / div; -} - -void __init ralink_clk_init(void) -{ - unsigned long xtal_rate; - unsigned long cpu_pll_rate; - unsigned long pll_rate; - unsigned long cpu_rate; - unsigned long sys_rate; - unsigned long dram_rate; - unsigned long periph_rate; - unsigned long pcmi2s_rate; - - xtal_rate = mt7620_get_xtal_rate(); - -#define RFMT(label) label ":%lu.%03luMHz " -#define RINT(x) ((x) / 1000000) -#define RFRAC(x) (((x) / 1000) % 1000) - - if (is_mt76x8()) { - if (xtal_rate == MHZ(40)) - cpu_rate = MHZ(580); - else - cpu_rate = MHZ(575); - dram_rate = sys_rate = cpu_rate / 3; - periph_rate = MHZ(40); - pcmi2s_rate = MHZ(480); - - ralink_clk_add("10000d00.uartlite", periph_rate); - ralink_clk_add("10000e00.uartlite", periph_rate); - } else { - cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate); - pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate); - - cpu_rate = mt7620_get_cpu_rate(pll_rate); - dram_rate = mt7620_get_dram_rate(pll_rate); - sys_rate = mt7620_get_sys_rate(cpu_rate); - periph_rate = mt7620_get_periph_rate(xtal_rate); - pcmi2s_rate = periph_rate; - - pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"), - RINT(xtal_rate), RFRAC(xtal_rate), - RINT(cpu_pll_rate), RFRAC(cpu_pll_rate), - RINT(pll_rate), RFRAC(pll_rate)); - - ralink_clk_add("10000500.uart", periph_rate); - } - - pr_debug(RFMT("CPU") RFMT("DRAM") RFMT("SYS") RFMT("PERIPH"), - RINT(cpu_rate), RFRAC(cpu_rate), - RINT(dram_rate), RFRAC(dram_rate), - RINT(sys_rate), RFRAC(sys_rate), - RINT(periph_rate), RFRAC(periph_rate)); -#undef RFRAC -#undef RINT -#undef RFMT - - ralink_clk_add("cpu", cpu_rate); - ralink_clk_add("10000100.timer", periph_rate); - ralink_clk_add("10000120.watchdog", periph_rate); - ralink_clk_add("10000900.i2c", periph_rate); - ralink_clk_add("10000a00.i2s", pcmi2s_rate); - ralink_clk_add("10000b00.spi", sys_rate); - ralink_clk_add("10000b40.spi", sys_rate); - ralink_clk_add("10000c00.uartlite", periph_rate); - ralink_clk_add("10000d00.uart1", periph_rate); - ralink_clk_add("10000e00.uart2", periph_rate); - ralink_clk_add("10180000.wmac", xtal_rate); - - if (IS_ENABLED(CONFIG_USB) && !is_mt76x8()) { - /* - * When the CPU goes into sleep mode, the BUS clock will be - * too low for USB to function properly. Adjust the busses - * fractional divider to fix this - */ - u32 val = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG); - - val &= ~(CLKCFG_FDIV_MASK | CLKCFG_FFRAC_MASK); - val |= CLKCFG_FDIV_USB_VAL | CLKCFG_FFRAC_USB_VAL; - - rt_sysc_w32(val, SYSC_REG_CPU_SYS_CLKCFG); - } -} - -void __init ralink_of_remap(void) -{ - rt_sysc_membase = plat_of_remap_node("ralink,mt7620a-sysc"); - rt_memc_membase = plat_of_remap_node("ralink,mt7620a-memc"); - - if (!rt_sysc_membase || !rt_memc_membase) - panic("Failed to remap core resources"); -} +static struct ralink_soc_info *soc_info_ptr; static __init void mt7620_dram_init(struct ralink_soc_info *soc_info) @@ -324,35 +93,76 @@ mt7628_dram_init(struct ralink_soc_info *soc_info) } } -void __init prom_soc_init(struct ralink_soc_info *soc_info) +static unsigned int __init mt7620_get_soc_name0(void) { - void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE); - unsigned char *name = NULL; - u32 n0; - u32 n1; - u32 rev; - u32 cfg0; - u32 pmu0; - u32 pmu1; - u32 bga; + return __raw_readl(MT7620_SYSC_BASE + SYSC_REG_CHIP_NAME0); +} - n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); - n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1); - rev = __raw_readl(sysc + SYSC_REG_CHIP_REV); - bga = (rev >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK; +static unsigned int __init mt7620_get_soc_name1(void) +{ + return __raw_readl(MT7620_SYSC_BASE + SYSC_REG_CHIP_NAME1); +} + +static bool __init mt7620_soc_valid(void) +{ + if (mt7620_get_soc_name0() == MT7620_CHIP_NAME0 && + mt7620_get_soc_name1() == MT7620_CHIP_NAME1) + return true; + else + return false; +} + +static bool __init mt7628_soc_valid(void) +{ + if (mt7620_get_soc_name0() == MT7620_CHIP_NAME0 && + mt7620_get_soc_name1() == MT7628_CHIP_NAME1) + return true; + else + return false; +} + +static unsigned int __init mt7620_get_rev(void) +{ + return __raw_readl(MT7620_SYSC_BASE + SYSC_REG_CHIP_REV); +} + +static unsigned int __init mt7620_get_bga(void) +{ + return (mt7620_get_rev() >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK; +} + +static unsigned int __init mt7620_get_efuse(void) +{ + return __raw_readl(MT7620_SYSC_BASE + SYSC_REG_EFUSE_CFG); +} + +static unsigned int __init mt7620_get_soc_ver(void) +{ + return (mt7620_get_rev() >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK; +} + +static unsigned int __init mt7620_get_soc_eco(void) +{ + return (mt7620_get_rev() & CHIP_REV_ECO_MASK); +} + +static const char __init *mt7620_get_soc_name(struct ralink_soc_info *soc_info) +{ + if (mt7620_soc_valid()) { + u32 bga = mt7620_get_bga(); - if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) { if (bga) { ralink_soc = MT762X_SOC_MT7620A; - name = "MT7620A"; soc_info->compatible = "ralink,mt7620a-soc"; + return "MT7620A"; } else { ralink_soc = MT762X_SOC_MT7620N; - name = "MT7620N"; soc_info->compatible = "ralink,mt7620n-soc"; + return "MT7620N"; } - } else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) { - u32 efuse = __raw_readl(sysc + SYSC_REG_EFUSE_CFG); + } else if (mt7628_soc_valid()) { + u32 efuse = mt7620_get_efuse(); + unsigned char *name = NULL; if (efuse & EFUSE_MT7688) { ralink_soc = MT762X_SOC_MT7688; @@ -362,17 +172,63 @@ void __init prom_soc_init(struct ralink_soc_info *soc_info) name = "MT7628AN"; } soc_info->compatible = "ralink,mt7628an-soc"; + return name; } else { - panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1); + panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", + mt7620_get_soc_name0(), mt7620_get_soc_name1()); + } +} + +static const char __init *mt7620_get_soc_id_name(void) +{ + if (ralink_soc == MT762X_SOC_MT7620A) + return "mt7620a"; + else if (ralink_soc == MT762X_SOC_MT7620N) + return "mt7620n"; + else if (ralink_soc == MT762X_SOC_MT7688) + return "mt7688"; + else if (ralink_soc == MT762X_SOC_MT7628AN) + return "mt7628n"; + else + return "invalid"; +} + +static int __init mt7620_soc_dev_init(void) +{ + struct soc_device *soc_dev; + struct soc_device_attribute *soc_dev_attr; + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return -ENOMEM; + + soc_dev_attr->family = "Ralink"; + soc_dev_attr->soc_id = mt7620_get_soc_id_name(); + + soc_dev_attr->data = soc_info_ptr; + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) { + kfree(soc_dev_attr); + return PTR_ERR(soc_dev); } + return 0; +} +device_initcall(mt7620_soc_dev_init); + +void __init prom_soc_init(struct ralink_soc_info *soc_info) +{ + const char *name = mt7620_get_soc_name(soc_info); + u32 cfg0; + u32 pmu0; + u32 pmu1; + snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN, "MediaTek %s ver:%u eco:%u", - name, - (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK, - (rev & CHIP_REV_ECO_MASK)); + name, mt7620_get_soc_ver(), mt7620_get_soc_eco()); - cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0); + cfg0 = __raw_readl(MT7620_SYSC_BASE + SYSC_REG_SYSTEM_CONFIG0); if (is_mt76x8()) { dram_type = cfg0 & DRAM_TYPE_MT7628_MASK; } else { @@ -388,11 +244,13 @@ void __init prom_soc_init(struct ralink_soc_info *soc_info) else mt7620_dram_init(soc_info); - pmu0 = __raw_readl(sysc + PMU0_CFG); - pmu1 = __raw_readl(sysc + PMU1_CFG); + pmu0 = __raw_readl(MT7620_SYSC_BASE + PMU0_CFG); + pmu1 = __raw_readl(MT7620_SYSC_BASE + PMU1_CFG); pr_info("Analog PMU set to %s control\n", (pmu0 & PMU_SW_SET) ? ("sw") : ("hw")); pr_info("Digital PMU set to %s control\n", (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw")); + + soc_info_ptr = soc_info; } |