diff options
Diffstat (limited to 'arch/parisc/kernel/pci.c')
| -rw-r--r-- | arch/parisc/kernel/pci.c | 69 |
1 files changed, 19 insertions, 50 deletions
diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c index 64f2764a8cef..cf285b17a5ae 100644 --- a/arch/parisc/kernel/pci.c +++ b/arch/parisc/kernel/pci.c @@ -34,25 +34,14 @@ #define DBG_RES(x...) #endif -/* To be used as: mdelay(pci_post_reset_delay); - * - * post_reset is the time the kernel should stall to prevent anyone from - * accessing the PCI bus once #RESET is de-asserted. - * PCI spec somewhere says 1 second but with multi-PCI bus systems, - * this makes the boot time much longer than necessary. - * 20ms seems to work for all the HP PCI implementations to date. - * - * #define pci_post_reset_delay 50 - */ +struct pci_port_ops *pci_port __ro_after_init; +struct pci_bios_ops *pci_bios __ro_after_init; -struct pci_port_ops *pci_port __read_mostly; -struct pci_bios_ops *pci_bios __read_mostly; - -static int pci_hba_count __read_mostly; +static int pci_hba_count __ro_after_init; /* parisc_pci_hba used by pci_port->in/out() ops to lookup bus data. */ #define PCI_HBA_MAX 32 -static struct pci_hba_data *parisc_pci_hba[PCI_HBA_MAX] __read_mostly; +static struct pci_hba_data *parisc_pci_hba[PCI_HBA_MAX] __ro_after_init; /******************************************************************** @@ -170,23 +159,31 @@ void pcibios_set_master(struct pci_dev *dev) (0x80 << 8) | pci_cache_line_size); } - -void __init pcibios_init_bus(struct pci_bus *bus) +/* + * pcibios_init_bridge() initializes cache line and default latency + * for pci controllers and pci-pci bridges + */ +void __ref pcibios_init_bridge(struct pci_dev *dev) { - struct pci_dev *dev = bus->self; - unsigned short bridge_ctl; + unsigned short bridge_ctl, bridge_ctl_new; /* We deal only with pci controllers and pci-pci bridges. */ if (!dev || (dev->class >> 8) != PCI_CLASS_BRIDGE_PCI) return; /* PCI-PCI bridge - set the cache line and default latency - (32) for primary and secondary buses. */ + * (32) for primary and secondary buses. + */ pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 32); pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bridge_ctl); - bridge_ctl |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR; - pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bridge_ctl); + + bridge_ctl_new = bridge_ctl | PCI_BRIDGE_CTL_PARITY | + PCI_BRIDGE_CTL_SERR | PCI_BRIDGE_CTL_MASTER_ABORT; + dev_info(&dev->dev, "Changing bridge control from 0x%08x to 0x%08x\n", + bridge_ctl, bridge_ctl_new); + + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bridge_ctl_new); } /* @@ -219,34 +216,6 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res, return start; } - -int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, - enum pci_mmap_state mmap_state, int write_combine) -{ - unsigned long prot; - - /* - * I/O space can be accessed via normal processor loads and stores on - * this platform but for now we elect not to do this and portable - * drivers should not do this anyway. - */ - if (mmap_state == pci_mmap_io) - return -EINVAL; - - if (write_combine) - return -EINVAL; - - /* - * Ignore write-combine; for now only return uncached mappings. - */ - prot = pgprot_val(vma->vm_page_prot); - prot |= _PAGE_NO_CACHE; - vma->vm_page_prot = __pgprot(prot); - - return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, - vma->vm_end - vma->vm_start, vma->vm_page_prot); -} - /* * A driver is enabling the device. We make sure that all the appropriate * bits are set to allow the device to operate as the driver is expecting. |