diff options
Diffstat (limited to 'arch/powerpc/boot')
131 files changed, 763 insertions, 9880 deletions
diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore index a4716d138cfc..5a867f23fe7f 100644 --- a/arch/powerpc/boot/.gitignore +++ b/arch/powerpc/boot/.gitignore @@ -30,7 +30,6 @@ zImage.coff zImage.epapr zImage.holly zImage.*lds -zImage.maple zImage.miboot zImage.pmac zImage.pseries diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c index 00c4d843a023..682ca3827892 100644 --- a/arch/powerpc/boot/4xx.c +++ b/arch/powerpc/boot/4xx.c @@ -253,7 +253,6 @@ void ibm4xx_denali_fixup_memsize(void) dt_fixup_memory(0, memsize); } -#define SPRN_DBCR0_40X 0x3F2 #define SPRN_DBCR0_44X 0x134 #define DBCR0_RST_SYSTEM 0x30000000 @@ -270,18 +269,6 @@ void ibm44x_dbcr_reset(void) } -void ibm40x_dbcr_reset(void) -{ - unsigned long tmp; - - asm volatile ( - "mfspr %0,%1\n" - "oris %0,%0,%2@h\n" - "mtspr %1,%0" - : "=&r"(tmp) : "i"(SPRN_DBCR0_40X), "i"(DBCR0_RST_SYSTEM) - ); -} - #define EMAC_RESET 0x20000000 void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1) { @@ -544,256 +531,3 @@ void ibm440spe_fixup_clocks(unsigned int sys_clk, eplike_fixup_uart_clk(1, "/plb/opb/serial@f0000300", ser_clk, plb_clk); eplike_fixup_uart_clk(2, "/plb/opb/serial@f0000600", ser_clk, plb_clk); } - -void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk) -{ - u32 pllmr = mfdcr(DCRN_CPC0_PLLMR); - u32 cpc0_cr0 = mfdcr(DCRN_405_CPC0_CR0); - u32 cpc0_cr1 = mfdcr(DCRN_405_CPC0_CR1); - u32 psr = mfdcr(DCRN_405_CPC0_PSR); - u32 cpu, plb, opb, ebc, tb, uart0, uart1, m; - u32 fwdv, fwdvb, fbdv, cbdv, opdv, epdv, ppdv, udiv; - - fwdv = (8 - ((pllmr & 0xe0000000) >> 29)); - fbdv = (pllmr & 0x1e000000) >> 25; - if (fbdv == 0) - fbdv = 16; - cbdv = ((pllmr & 0x00060000) >> 17) + 1; /* CPU:PLB */ - opdv = ((pllmr & 0x00018000) >> 15) + 1; /* PLB:OPB */ - ppdv = ((pllmr & 0x00006000) >> 13) + 1; /* PLB:PCI */ - epdv = ((pllmr & 0x00001800) >> 11) + 2; /* PLB:EBC */ - udiv = ((cpc0_cr0 & 0x3e) >> 1) + 1; - - /* check for 405GPr */ - if ((mfpvr() & 0xfffffff0) == (0x50910951 & 0xfffffff0)) { - fwdvb = 8 - (pllmr & 0x00000007); - if (!(psr & 0x00001000)) /* PCI async mode enable == 0 */ - if (psr & 0x00000020) /* New mode enable */ - m = fwdvb * 2 * ppdv; - else - m = fwdvb * cbdv * ppdv; - else if (psr & 0x00000020) /* New mode enable */ - if (psr & 0x00000800) /* PerClk synch mode */ - m = fwdvb * 2 * epdv; - else - m = fbdv * fwdv; - else if (epdv == fbdv) - m = fbdv * cbdv * epdv; - else - m = fbdv * fwdvb * cbdv; - - cpu = sys_clk * m / fwdv; - plb = sys_clk * m / (fwdvb * cbdv); - } else { - m = fwdv * fbdv * cbdv; - cpu = sys_clk * m / fwdv; - plb = cpu / cbdv; - } - opb = plb / opdv; - ebc = plb / epdv; - - if (cpc0_cr0 & 0x80) - /* uart0 uses the external clock */ - uart0 = ser_clk; - else - uart0 = cpu / udiv; - - if (cpc0_cr0 & 0x40) - /* uart1 uses the external clock */ - uart1 = ser_clk; - else - uart1 = cpu / udiv; - - /* setup the timebase clock to tick at the cpu frequency */ - cpc0_cr1 = cpc0_cr1 & ~0x00800000; - mtdcr(DCRN_405_CPC0_CR1, cpc0_cr1); - tb = cpu; - - dt_fixup_cpu_clocks(cpu, tb, 0); - dt_fixup_clock("/plb", plb); - dt_fixup_clock("/plb/opb", opb); - dt_fixup_clock("/plb/ebc", ebc); - dt_fixup_clock("/plb/opb/serial@ef600300", uart0); - dt_fixup_clock("/plb/opb/serial@ef600400", uart1); -} - - -void ibm405ep_fixup_clocks(unsigned int sys_clk) -{ - u32 pllmr0 = mfdcr(DCRN_CPC0_PLLMR0); - u32 pllmr1 = mfdcr(DCRN_CPC0_PLLMR1); - u32 cpc0_ucr = mfdcr(DCRN_CPC0_UCR); - u32 cpu, plb, opb, ebc, uart0, uart1; - u32 fwdva, fwdvb, fbdv, cbdv, opdv, epdv; - u32 pllmr0_ccdv, tb, m; - - fwdva = 8 - ((pllmr1 & 0x00070000) >> 16); - fwdvb = 8 - ((pllmr1 & 0x00007000) >> 12); - fbdv = (pllmr1 & 0x00f00000) >> 20; - if (fbdv == 0) - fbdv = 16; - - cbdv = ((pllmr0 & 0x00030000) >> 16) + 1; /* CPU:PLB */ - epdv = ((pllmr0 & 0x00000300) >> 8) + 2; /* PLB:EBC */ - opdv = ((pllmr0 & 0x00003000) >> 12) + 1; /* PLB:OPB */ - - m = fbdv * fwdvb; - - pllmr0_ccdv = ((pllmr0 & 0x00300000) >> 20) + 1; - if (pllmr1 & 0x80000000) - cpu = sys_clk * m / (fwdva * pllmr0_ccdv); - else - cpu = sys_clk / pllmr0_ccdv; - - plb = cpu / cbdv; - opb = plb / opdv; - ebc = plb / epdv; - tb = cpu; - uart0 = cpu / (cpc0_ucr & 0x0000007f); - uart1 = cpu / ((cpc0_ucr & 0x00007f00) >> 8); - - dt_fixup_cpu_clocks(cpu, tb, 0); - dt_fixup_clock("/plb", plb); - dt_fixup_clock("/plb/opb", opb); - dt_fixup_clock("/plb/ebc", ebc); - dt_fixup_clock("/plb/opb/serial@ef600300", uart0); - dt_fixup_clock("/plb/opb/serial@ef600400", uart1); -} - -static u8 ibm405ex_fwdv_multi_bits[] = { - /* values for: 1 - 16 */ - 0x01, 0x02, 0x0e, 0x09, 0x04, 0x0b, 0x10, 0x0d, 0x0c, 0x05, - 0x06, 0x0f, 0x0a, 0x07, 0x08, 0x03 -}; - -u32 ibm405ex_get_fwdva(unsigned long cpr_fwdv) -{ - u32 index; - - for (index = 0; index < ARRAY_SIZE(ibm405ex_fwdv_multi_bits); index++) - if (cpr_fwdv == (u32)ibm405ex_fwdv_multi_bits[index]) - return index + 1; - - return 0; -} - -static u8 ibm405ex_fbdv_multi_bits[] = { - /* values for: 1 - 100 */ - 0x00, 0xff, 0x7e, 0xfd, 0x7a, 0xf5, 0x6a, 0xd5, 0x2a, 0xd4, - 0x29, 0xd3, 0x26, 0xcc, 0x19, 0xb3, 0x67, 0xce, 0x1d, 0xbb, - 0x77, 0xee, 0x5d, 0xba, 0x74, 0xe9, 0x52, 0xa5, 0x4b, 0x96, - 0x2c, 0xd8, 0x31, 0xe3, 0x46, 0x8d, 0x1b, 0xb7, 0x6f, 0xde, - 0x3d, 0xfb, 0x76, 0xed, 0x5a, 0xb5, 0x6b, 0xd6, 0x2d, 0xdb, - 0x36, 0xec, 0x59, 0xb2, 0x64, 0xc9, 0x12, 0xa4, 0x48, 0x91, - 0x23, 0xc7, 0x0e, 0x9c, 0x38, 0xf0, 0x61, 0xc2, 0x05, 0x8b, - 0x17, 0xaf, 0x5f, 0xbe, 0x7c, 0xf9, 0x72, 0xe5, 0x4a, 0x95, - 0x2b, 0xd7, 0x2e, 0xdc, 0x39, 0xf3, 0x66, 0xcd, 0x1a, 0xb4, - 0x68, 0xd1, 0x22, 0xc4, 0x09, 0x93, 0x27, 0xcf, 0x1e, 0xbc, - /* values for: 101 - 200 */ - 0x78, 0xf1, 0x62, 0xc5, 0x0a, 0x94, 0x28, 0xd0, 0x21, 0xc3, - 0x06, 0x8c, 0x18, 0xb0, 0x60, 0xc1, 0x02, 0x84, 0x08, 0x90, - 0x20, 0xc0, 0x01, 0x83, 0x07, 0x8f, 0x1f, 0xbf, 0x7f, 0xfe, - 0x7d, 0xfa, 0x75, 0xea, 0x55, 0xaa, 0x54, 0xa9, 0x53, 0xa6, - 0x4c, 0x99, 0x33, 0xe7, 0x4e, 0x9d, 0x3b, 0xf7, 0x6e, 0xdd, - 0x3a, 0xf4, 0x69, 0xd2, 0x25, 0xcb, 0x16, 0xac, 0x58, 0xb1, - 0x63, 0xc6, 0x0d, 0x9b, 0x37, 0xef, 0x5e, 0xbd, 0x7b, 0xf6, - 0x6d, 0xda, 0x35, 0xeb, 0x56, 0xad, 0x5b, 0xb6, 0x6c, 0xd9, - 0x32, 0xe4, 0x49, 0x92, 0x24, 0xc8, 0x11, 0xa3, 0x47, 0x8e, - 0x1c, 0xb8, 0x70, 0xe1, 0x42, 0x85, 0x0b, 0x97, 0x2f, 0xdf, - /* values for: 201 - 255 */ - 0x3e, 0xfc, 0x79, 0xf2, 0x65, 0xca, 0x15, 0xab, 0x57, 0xae, - 0x5c, 0xb9, 0x73, 0xe6, 0x4d, 0x9a, 0x34, 0xe8, 0x51, 0xa2, - 0x44, 0x89, 0x13, 0xa7, 0x4f, 0x9e, 0x3c, 0xf8, 0x71, 0xe2, - 0x45, 0x8a, 0x14, 0xa8, 0x50, 0xa1, 0x43, 0x86, 0x0c, 0x98, - 0x30, 0xe0, 0x41, 0x82, 0x04, 0x88, 0x10, 0xa0, 0x40, 0x81, - 0x03, 0x87, 0x0f, 0x9f, 0x3f /* END */ -}; - -u32 ibm405ex_get_fbdv(unsigned long cpr_fbdv) -{ - u32 index; - - for (index = 0; index < ARRAY_SIZE(ibm405ex_fbdv_multi_bits); index++) - if (cpr_fbdv == (u32)ibm405ex_fbdv_multi_bits[index]) - return index + 1; - - return 0; -} - -void ibm405ex_fixup_clocks(unsigned int sys_clk, unsigned int uart_clk) -{ - /* PLL config */ - u32 pllc = CPR0_READ(DCRN_CPR0_PLLC); - u32 plld = CPR0_READ(DCRN_CPR0_PLLD); - u32 cpud = CPR0_READ(DCRN_CPR0_PRIMAD); - u32 plbd = CPR0_READ(DCRN_CPR0_PRIMBD); - u32 opbd = CPR0_READ(DCRN_CPR0_OPBD); - u32 perd = CPR0_READ(DCRN_CPR0_PERD); - - /* Dividers */ - u32 fbdv = ibm405ex_get_fbdv(__fix_zero((plld >> 24) & 0xff, 1)); - - u32 fwdva = ibm405ex_get_fwdva(__fix_zero((plld >> 16) & 0x0f, 1)); - - u32 cpudv0 = __fix_zero((cpud >> 24) & 7, 8); - - /* PLBDV0 is hardwared to 010. */ - u32 plbdv0 = 2; - u32 plb2xdv0 = __fix_zero((plbd >> 16) & 7, 8); - - u32 opbdv0 = __fix_zero((opbd >> 24) & 3, 4); - - u32 perdv0 = __fix_zero((perd >> 24) & 3, 4); - - /* Resulting clocks */ - u32 cpu, plb, opb, ebc, vco, tb, uart0, uart1; - - /* PLL's VCO is the source for primary forward ? */ - if (pllc & 0x40000000) { - u32 m; - - /* Feedback path */ - switch ((pllc >> 24) & 7) { - case 0: - /* PLLOUTx */ - m = fbdv; - break; - case 1: - /* CPU */ - m = fbdv * fwdva * cpudv0; - break; - case 5: - /* PERClk */ - m = fbdv * fwdva * plb2xdv0 * plbdv0 * opbdv0 * perdv0; - break; - default: - printf("WARNING ! Invalid PLL feedback source !\n"); - goto bypass; - } - - vco = (unsigned int)(sys_clk * m); - } else { -bypass: - /* Bypass system PLL */ - vco = 0; - } - - /* CPU = VCO / ( FWDVA x CPUDV0) */ - cpu = vco / (fwdva * cpudv0); - /* PLB = VCO / ( FWDVA x PLB2XDV0 x PLBDV0) */ - plb = vco / (fwdva * plb2xdv0 * plbdv0); - /* OPB = PLB / OPBDV0 */ - opb = plb / opbdv0; - /* EBC = OPB / PERDV0 */ - ebc = opb / perdv0; - - tb = cpu; - uart0 = uart1 = uart_clk; - - dt_fixup_cpu_clocks(cpu, tb, 0); - dt_fixup_clock("/plb", plb); - dt_fixup_clock("/plb/opb", opb); - dt_fixup_clock("/plb/opb/ebc", ebc); - dt_fixup_clock("/plb/opb/serial@ef600200", uart0); - dt_fixup_clock("/plb/opb/serial@ef600300", uart1); -} diff --git a/arch/powerpc/boot/4xx.h b/arch/powerpc/boot/4xx.h index 77f15d124c81..62df496b7ba6 100644 --- a/arch/powerpc/boot/4xx.h +++ b/arch/powerpc/boot/4xx.h @@ -12,13 +12,9 @@ void ibm4xx_sdram_fixup_memsize(void); void ibm440spe_fixup_memsize(void); void ibm4xx_denali_fixup_memsize(void); void ibm44x_dbcr_reset(void); -void ibm40x_dbcr_reset(void); void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1); void ibm4xx_fixup_ebc_ranges(const char *ebc); -void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk); -void ibm405ep_fixup_clocks(unsigned int sys_clk); -void ibm405ex_fixup_clocks(unsigned int sys_clk, unsigned int uart_clk); void ibm440gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk); void ibm440ep_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk, unsigned int tmr_clk); diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index d32d95aea5d6..f1a4761ebd44 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -32,39 +32,61 @@ else BOOTAR := $(AR) endif -BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ - -fno-strict-aliasing -O2 -msoft-float -mno-altivec -mno-vsx \ - $(call cc-option,-mno-spe) $(call cc-option,-mspe=no) \ - -pipe -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \ - $(LINUXINCLUDE) - ifdef CONFIG_PPC64_BOOT_WRAPPER -ifdef CONFIG_CPU_LITTLE_ENDIAN -BOOTCFLAGS += -m64 -mcpu=powerpc64le +BOOTTARGETFLAGS += -m64 +BOOTTARGETFLAGS += -mabi=elfv2 +ifdef CONFIG_PPC64_ELF_ABI_V2 +BOOTTARGETFLAGS += $(call cc-option,-mabi=elfv2) +endif else -BOOTCFLAGS += -m64 -mcpu=powerpc64 +BOOTTARGETFLAGS := -m32 endif + +ifdef CONFIG_TARGET_CPU_BOOL +BOOTTARGETFLAGS += -mcpu=$(CONFIG_TARGET_CPU) +else ifdef CONFIG_PPC64_BOOT_WRAPPER +ifdef CONFIG_CPU_LITTLE_ENDIAN +BOOTTARGETFLAGS += -mcpu=powerpc64le else -BOOTCFLAGS += -m32 -mcpu=powerpc +BOOTTARGETFLAGS += -mcpu=powerpc64 +endif endif -BOOTCFLAGS += -isystem $(shell $(BOOTCC) -print-file-name=include) +$(obj)/4xx.o: BOOTTARGETFLAGS += -mcpu=405 +$(obj)/ebony.o: BOOTTARGETFLAGS += -mcpu=440 +$(obj)/cuboot-taishan.o: BOOTTARGETFLAGS += -mcpu=440 +$(obj)/cuboot-katmai.o: BOOTTARGETFLAGS += -mcpu=440 +$(obj)/treeboot-iss4xx.o: BOOTTARGETFLAGS += -mcpu=405 +$(obj)/treeboot-currituck.o: BOOTTARGETFLAGS += -mcpu=405 +$(obj)/treeboot-akebono.o: BOOTTARGETFLAGS += -mcpu=405 ifdef CONFIG_CPU_BIG_ENDIAN -BOOTCFLAGS += -mbig-endian +BOOTTARGETFLAGS += -mbig-endian else -BOOTCFLAGS += -mlittle-endian -endif -ifdef CONFIG_PPC64_ELF_ABI_V2 -BOOTCFLAGS += $(call cc-option,-mabi=elfv2) +BOOTTARGETFLAGS += -mlittle-endian endif -BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -nostdinc +BOOTCPPFLAGS := -nostdinc $(LINUXINCLUDE) +BOOTCPPFLAGS += -isystem $(shell $(BOOTCC) -print-file-name=include) + +BOOTCFLAGS := $(BOOTTARGETFLAGS) \ + -std=gnu11 -fms-extensions \ + -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ + -fno-strict-aliasing -O2 \ + -msoft-float -mno-altivec -mno-vsx \ + $(call cc-option,-mno-prefixed) \ + $(call cc-option,-mno-pcrel) \ + $(call cc-option,-mno-mma) \ + $(call cc-option,-mno-spe) $(call cc-option,-mspe=no) \ + -fomit-frame-pointer -fno-builtin -fPIC + +BOOTAFLAGS := $(BOOTTARGETFLAGS) -D__ASSEMBLY__ BOOTARFLAGS := -crD ifdef CONFIG_CC_IS_CLANG BOOTCFLAGS += $(CLANG_FLAGS) +BOOTCFLAGS += -Wno-microsoft-anon-tag BOOTAFLAGS += $(CLANG_FLAGS) endif @@ -81,23 +103,13 @@ BOOTCFLAGS += -I$(objtree)/$(obj) -I$(srctree)/$(obj) DTC_FLAGS ?= -p 1024 -$(obj)/4xx.o: BOOTCFLAGS += -mcpu=405 -$(obj)/ebony.o: BOOTCFLAGS += -mcpu=440 -$(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405 -$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440 -$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440 -$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405 -$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405 -$(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405 -$(obj)/treeboot-akebono.o: BOOTCFLAGS += -mcpu=405 - # The pre-boot decompressors pull in a lot of kernel headers and other source # files. This creates a bit of a dependency headache since we need to copy # these files into the build dir, fix up any includes and ensure that dependent # files are copied in the right order. -# these need to be seperate variables because they are copied out of different -# directories in the kernel tree. Sure you COULd merge them, but it's a +# these need to be separate variables because they are copied out of different +# directories in the kernel tree. Sure you COULD merge them, but it's a # cure-is-worse-than-disease situation. zlib-decomp-$(CONFIG_KERNEL_GZIP) := decompress_inflate.c zlib-$(CONFIG_KERNEL_GZIP) := inffast.c inflate.c inftrees.c @@ -134,7 +146,6 @@ src-wlib-$(CONFIG_PPC_POWERNV) += opal-calls.S opal.c ifndef CONFIG_PPC64_BOOT_WRAPPER src-wlib-y += crtsavres.S endif -src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c src-wlib-$(CONFIG_PPC_8xx) += mpc8xx.c planetcore.c fsl-soc.c src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c @@ -142,9 +153,6 @@ src-wlib-$(CONFIG_EMBEDDED6xx) += ugecon.c fsl-soc.c src-wlib-$(CONFIG_CPM) += cpm-serial.c src-plat-y := of.c epapr.c -src-plat-$(CONFIG_40x) += fixed-head.S cuboot-hotfoot.c \ - cuboot-acadia.c \ - cuboot-kilauea.c simpleboot.c src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \ cuboot-bamboo.c cuboot-sam440ep.c \ cuboot-sequoia.c cuboot-rainier.c \ @@ -158,7 +166,7 @@ src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c -src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \ +src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c \ gamecube-head.S gamecube.c \ wii-head.S wii.c holly.c \ fixed-head.S mvme5100.c @@ -167,7 +175,6 @@ src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S -src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c @@ -206,7 +213,7 @@ $(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc $(obj)/empty.c: $(Q)touch $@ -$(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds : $(obj)/%: $(srctree)/$(src)/%.S +$(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds : $(obj)/%: $(src)/%.S $(Q)cp $< $@ clean-files := $(zlib-) $(zlibheader-) $(zliblinuxheader-) \ @@ -214,10 +221,10 @@ clean-files := $(zlib-) $(zlibheader-) $(zliblinuxheader-) \ empty.c zImage.coff.lds zImage.ps3.lds zImage.lds quiet_cmd_bootcc = BOOTCC $@ - cmd_bootcc = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $< + cmd_bootcc = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTCPPFLAGS) $(BOOTCFLAGS) -c -o $@ $< quiet_cmd_bootas = BOOTAS $@ - cmd_bootas = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $< + cmd_bootas = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTCPPFLAGS) $(BOOTAFLAGS) -c -o $@ $< quiet_cmd_bootar = BOOTAR $@ cmd_bootar = $(BOOTAR) $(BOOTARFLAGS) $@.$$$$ $(real-prereqs); mv $@.$$$$ $@ @@ -237,13 +244,13 @@ $(obj)/wrapper.a: $(obj-wlib) FORCE hostprogs := addnote hack-coff mktree targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) zImage.lds -extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ +always-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds -dtstree := $(srctree)/$(src)/dts +dtstree := $(src)/dts -wrapper :=$(srctree)/$(src)/wrapper -wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \ +wrapper := $(src)/wrapper +wrapperbits := $(always-y) $(addprefix $(obj)/,addnote hack-coff mktree) \ $(wrapper) FORCE ############# @@ -270,8 +277,6 @@ quiet_cmd_wrap = WRAP $@ image-$(CONFIG_PPC_PSERIES) += zImage.pseries image-$(CONFIG_PPC_POWERNV) += zImage.pseries -image-$(CONFIG_PPC_MAPLE) += zImage.maple -image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries image-$(CONFIG_PPC_PS3) += dtbImage.ps3 image-$(CONFIG_PPC_CHRP) += zImage.chrp image-$(CONFIG_PPC_EFIKA) += zImage.chrp @@ -288,11 +293,6 @@ image-$(CONFIG_EPAPR_BOOT) += zImage.epapr # Boards with newish u-boot firmware can use the uImage target above # -# Board ports in arch/powerpc/platform/40x/Kconfig -image-$(CONFIG_HOTFOOT) += cuImage.hotfoot -image-$(CONFIG_ACADIA) += cuImage.acadia -image-$(CONFIG_OBS600) += uImage.obs600 - # Board ports in arch/powerpc/platform/44x/Kconfig image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony image-$(CONFIG_BAMBOO) += treeImage.bamboo cuImage.bamboo @@ -321,25 +321,15 @@ image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200b image-$(CONFIG_PPC_MEDIA5200) += cuImage.media5200 # Board ports in arch/powerpc/platform/82xx/Kconfig -image-$(CONFIG_MPC8272_ADS) += cuImage.mpc8272ads -image-$(CONFIG_PQ2FADS) += cuImage.pq2fads image-$(CONFIG_EP8248E) += dtbImage.ep8248e # Board ports in arch/powerpc/platform/83xx/Kconfig -image-$(CONFIG_MPC832x_MDS) += cuImage.mpc832x_mds image-$(CONFIG_MPC832x_RDB) += cuImage.mpc832x_rdb image-$(CONFIG_MPC834x_ITX) += cuImage.mpc8349emitx \ cuImage.mpc8349emitxgp -image-$(CONFIG_MPC834x_MDS) += cuImage.mpc834x_mds -image-$(CONFIG_MPC836x_MDS) += cuImage.mpc836x_mds image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot # Board ports in arch/powerpc/platform/85xx/Kconfig -image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads -image-$(CONFIG_MPC8560_ADS) += cuImage.mpc8560ads -image-$(CONFIG_MPC85xx_CDS) += cuImage.mpc8541cds \ - cuImage.mpc8548cds_32b \ - cuImage.mpc8555cds image-$(CONFIG_MPC85xx_MDS) += cuImage.mpc8568mds image-$(CONFIG_MPC85xx_DS) += cuImage.mpc8544ds \ cuImage.mpc8572ds @@ -355,7 +345,6 @@ image-$(CONFIG_MVME7100) += dtbImage.mvme7100 # Board ports in arch/powerpc/platform/embedded6xx/Kconfig image-$(CONFIG_STORCENTER) += cuImage.storcenter -image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2 image-$(CONFIG_GAMECUBE) += dtbImage.gamecube image-$(CONFIG_WII) += dtbImage.wii image-$(CONFIG_MVME5100) += dtbImage.mvme5100 @@ -454,7 +443,7 @@ $(obj)/zImage.initrd: $(addprefix $(obj)/, $(initrd-y)) clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \ zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \ zImage.miboot zImage.pmac zImage.pseries \ - zImage.maple simpleImage.* otheros.bld + simpleImage.* otheros.bld # clean up files cached by wrapper clean-kernel-base := vmlinux.strip vmlinux.bin @@ -468,7 +457,7 @@ WRAPPER_DTSDIR := /usr/lib/kernel-wrapper/dts WRAPPER_BINDIR := /usr/sbin INSTALL := install -extra-installed := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y)) +extra-installed := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(always-y)) hostprogs-installed := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs)) wrapper-installed := $(DESTDIR)$(WRAPPER_BINDIR)/wrapper dts-installed := $(patsubst $(dtstree)/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(dtstree)/*.dts)) diff --git a/arch/powerpc/boot/addnote.c b/arch/powerpc/boot/addnote.c index 53b3b2621457..78704927453a 100644 --- a/arch/powerpc/boot/addnote.c +++ b/arch/powerpc/boot/addnote.c @@ -68,8 +68,8 @@ static int e_class = ELFCLASS32; #define PUT_16BE(off, v)(buf[off] = ((v) >> 8) & 0xff, \ buf[(off) + 1] = (v) & 0xff) #define PUT_32BE(off, v)(PUT_16BE((off), (v) >> 16L), PUT_16BE((off) + 2, (v))) -#define PUT_64BE(off, v)((PUT_32BE((off), (v) >> 32L), \ - PUT_32BE((off) + 4, (v)))) +#define PUT_64BE(off, v)((PUT_32BE((off), (unsigned long long)(v) >> 32L), \ + PUT_32BE((off) + 4, (unsigned long long)(v)))) #define GET_16LE(off) ((buf[off]) + (buf[(off)+1] << 8)) #define GET_32LE(off) (GET_16LE(off) + (GET_16LE((off)+2U) << 16U)) @@ -78,7 +78,8 @@ static int e_class = ELFCLASS32; #define PUT_16LE(off, v) (buf[off] = (v) & 0xff, \ buf[(off) + 1] = ((v) >> 8) & 0xff) #define PUT_32LE(off, v) (PUT_16LE((off), (v)), PUT_16LE((off) + 2, (v) >> 16L)) -#define PUT_64LE(off, v) (PUT_32LE((off), (v)), PUT_32LE((off) + 4, (v) >> 32L)) +#define PUT_64LE(off, v) (PUT_32LE((off), (unsigned long long)(v)), \ + PUT_32LE((off) + 4, (unsigned long long)(v) >> 32L)) #define GET_16(off) (e_data == ELFDATA2MSB ? GET_16BE(off) : GET_16LE(off)) #define GET_32(off) (e_data == ELFDATA2MSB ? GET_32BE(off) : GET_32LE(off)) diff --git a/arch/powerpc/boot/crt0.S b/arch/powerpc/boot/crt0.S index 44544720daae..121cab9d579b 100644 --- a/arch/powerpc/boot/crt0.S +++ b/arch/powerpc/boot/crt0.S @@ -51,7 +51,7 @@ _zimage_start: _zimage_start_lib: /* Work out the offset between the address we were linked at and the address where we're running. */ - bl .+4 + bcl 20,31,.+4 p_base: mflr r10 /* r10 now points to runtime addr of p_base */ #ifndef __powerpc64__ /* grab the link address of the dynamic section in r11 */ @@ -274,7 +274,7 @@ prom: mtsrr1 r10 /* Load FW address, set LR to label 1, and jump to FW */ - bl 0f + bcl 20,31,0f 0: mflr r10 addi r11,r10,(1f-0b) mtlr r11 diff --git a/arch/powerpc/boot/cuboot-acadia.c b/arch/powerpc/boot/cuboot-acadia.c deleted file mode 100644 index 46e96756cfe1..000000000000 --- a/arch/powerpc/boot/cuboot-acadia.c +++ /dev/null @@ -1,171 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Old U-boot compatibility for Acadia - * - * Author: Josh Boyer <jwboyer@linux.vnet.ibm.com> - * - * Copyright 2008 IBM Corporation - */ - -#include "ops.h" -#include "io.h" -#include "dcr.h" -#include "stdio.h" -#include "4xx.h" -#include "44x.h" -#include "cuboot.h" - -#define TARGET_4xx -#include "ppcboot.h" - -static bd_t bd; - -#define CPR_PERD0_SPIDV_MASK 0x000F0000 /* SPI Clock Divider */ - -#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */ - -#define PLLD_FBDV_MASK 0x1F000000 /* PLL feedback divider value */ -#define PLLD_FWDVA_MASK 0x000F0000 /* PLL forward divider A value */ -#define PLLD_FWDVB_MASK 0x00000700 /* PLL forward divider B value */ - -#define PRIMAD_CPUDV_MASK 0x0F000000 /* CPU Clock Divisor Mask */ -#define PRIMAD_PLBDV_MASK 0x000F0000 /* PLB Clock Divisor Mask */ -#define PRIMAD_OPBDV_MASK 0x00000F00 /* OPB Clock Divisor Mask */ -#define PRIMAD_EBCDV_MASK 0x0000000F /* EBC Clock Divisor Mask */ - -#define PERD0_PWMDV_MASK 0xFF000000 /* PWM Divider Mask */ -#define PERD0_SPIDV_MASK 0x000F0000 /* SPI Divider Mask */ -#define PERD0_U0DV_MASK 0x0000FF00 /* UART 0 Divider Mask */ -#define PERD0_U1DV_MASK 0x000000FF /* UART 1 Divider Mask */ - -static void get_clocks(void) -{ - unsigned long sysclk, cpr_plld, cpr_pllc, cpr_primad, plloutb, i; - unsigned long pllFwdDiv, pllFwdDivB, pllFbkDiv, pllPlbDiv, pllExtBusDiv; - unsigned long pllOpbDiv, freqEBC, freqUART, freqOPB; - unsigned long div; /* total divisor udiv * bdiv */ - unsigned long umin; /* minimum udiv */ - unsigned short diff; /* smallest diff */ - unsigned long udiv; /* best udiv */ - unsigned short idiff; /* current diff */ - unsigned short ibdiv; /* current bdiv */ - unsigned long est; /* current estimate */ - unsigned long baud; - void *np; - - /* read the sysclk value from the CPLD */ - sysclk = (in_8((unsigned char *)0x80000000) == 0xc) ? 66666666 : 33333000; - - /* - * Read PLL Mode registers - */ - cpr_plld = CPR0_READ(DCRN_CPR0_PLLD); - cpr_pllc = CPR0_READ(DCRN_CPR0_PLLC); - - /* - * Determine forward divider A - */ - pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16); - - /* - * Determine forward divider B - */ - pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8); - if (pllFwdDivB == 0) - pllFwdDivB = 8; - - /* - * Determine FBK_DIV. - */ - pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24); - if (pllFbkDiv == 0) - pllFbkDiv = 256; - - /* - * Read CPR_PRIMAD register - */ - cpr_primad = CPR0_READ(DCRN_CPR0_PRIMAD); - - /* - * Determine PLB_DIV. - */ - pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16); - if (pllPlbDiv == 0) - pllPlbDiv = 16; - - /* - * Determine EXTBUS_DIV. - */ - pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK); - if (pllExtBusDiv == 0) - pllExtBusDiv = 16; - - /* - * Determine OPB_DIV. - */ - pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8); - if (pllOpbDiv == 0) - pllOpbDiv = 16; - - /* There is a bug in U-Boot that prevents us from using - * bd.bi_opbfreq because U-Boot doesn't populate it for - * 405EZ. We get to calculate it, yay! - */ - freqOPB = (sysclk *pllFbkDiv) /pllOpbDiv; - - freqEBC = (sysclk * pllFbkDiv) / pllExtBusDiv; - - plloutb = ((sysclk * ((cpr_pllc & PLLC_SRC_MASK) ? - pllFwdDivB : pllFwdDiv) * - pllFbkDiv) / pllFwdDivB); - - np = find_node_by_alias("serial0"); - if (getprop(np, "current-speed", &baud, sizeof(baud)) != sizeof(baud)) - fatal("no current-speed property\n\r"); - - udiv = 256; /* Assume lowest possible serial clk */ - div = plloutb / (16 * baud); /* total divisor */ - umin = (plloutb / freqOPB) << 1; /* 2 x OPB divisor */ - diff = 256; /* highest possible */ - - /* i is the test udiv value -- start with the largest - * possible (256) to minimize serial clock and constrain - * search to umin. - */ - for (i = 256; i > umin; i--) { - ibdiv = div / i; - est = i * ibdiv; - idiff = (est > div) ? (est-div) : (div-est); - if (idiff == 0) { - udiv = i; - break; /* can't do better */ - } else if (idiff < diff) { - udiv = i; /* best so far */ - diff = idiff; /* update lowest diff*/ - } - } - freqUART = plloutb / udiv; - - dt_fixup_cpu_clocks(bd.bi_procfreq, bd.bi_intfreq, bd.bi_plb_busfreq); - dt_fixup_clock("/plb/ebc", freqEBC); - dt_fixup_clock("/plb/opb", freqOPB); - dt_fixup_clock("/plb/opb/serial@ef600300", freqUART); - dt_fixup_clock("/plb/opb/serial@ef600400", freqUART); -} - -static void acadia_fixups(void) -{ - dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); - get_clocks(); - dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); -} - -void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - CUBOOT_INIT(); - platform_ops.fixups = acadia_fixups; - platform_ops.exit = ibm40x_dbcr_reset; - fdt_init(_dtb_start); - serial_console_init(); -} diff --git a/arch/powerpc/boot/cuboot-hotfoot.c b/arch/powerpc/boot/cuboot-hotfoot.c deleted file mode 100644 index 0e5532f855d6..000000000000 --- a/arch/powerpc/boot/cuboot-hotfoot.c +++ /dev/null @@ -1,139 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Old U-boot compatibility for Esteem 195E Hotfoot CPU Board - * - * Author: Solomon Peachy <solomon@linux-wlan.com> - */ - -#include "ops.h" -#include "stdio.h" -#include "reg.h" -#include "dcr.h" -#include "4xx.h" -#include "cuboot.h" - -#define TARGET_4xx -#define TARGET_HOTFOOT - -#include "ppcboot-hotfoot.h" - -static bd_t bd; - -#define NUM_REGS 3 - -static void hotfoot_fixups(void) -{ - u32 uart = mfdcr(DCRN_CPC0_UCR) & 0x7f; - - dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); - - dt_fixup_cpu_clocks(bd.bi_procfreq, bd.bi_procfreq, 0); - dt_fixup_clock("/plb", bd.bi_plb_busfreq); - dt_fixup_clock("/plb/opb", bd.bi_opbfreq); - dt_fixup_clock("/plb/ebc", bd.bi_pci_busfreq); - dt_fixup_clock("/plb/opb/serial@ef600300", bd.bi_procfreq / uart); - dt_fixup_clock("/plb/opb/serial@ef600400", bd.bi_procfreq / uart); - - dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); - dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); - - /* Is this a single eth/serial board? */ - if ((bd.bi_enet1addr[0] == 0) && - (bd.bi_enet1addr[1] == 0) && - (bd.bi_enet1addr[2] == 0) && - (bd.bi_enet1addr[3] == 0) && - (bd.bi_enet1addr[4] == 0) && - (bd.bi_enet1addr[5] == 0)) { - void *devp; - - printf("Trimming devtree for single serial/eth board\n"); - - devp = finddevice("/plb/opb/serial@ef600300"); - if (!devp) - fatal("Can't find node for /plb/opb/serial@ef600300"); - del_node(devp); - - devp = finddevice("/plb/opb/ethernet@ef600900"); - if (!devp) - fatal("Can't find node for /plb/opb/ethernet@ef600900"); - del_node(devp); - } - - ibm4xx_quiesce_eth((u32 *)0xef600800, (u32 *)0xef600900); - - /* Fix up flash size in fdt for 4M boards. */ - if (bd.bi_flashsize < 0x800000) { - u32 regs[NUM_REGS]; - void *devp = finddevice("/plb/ebc/nor_flash@0"); - if (!devp) - fatal("Can't find FDT node for nor_flash!??"); - - printf("Fixing devtree for 4M Flash\n"); - - /* First fix up the base address */ - getprop(devp, "reg", regs, sizeof(regs)); - regs[0] = 0; - regs[1] = 0xffc00000; - regs[2] = 0x00400000; - setprop(devp, "reg", regs, sizeof(regs)); - - /* Then the offsets */ - devp = finddevice("/plb/ebc/nor_flash@0/partition@0"); - if (!devp) - fatal("Can't find FDT node for partition@0"); - getprop(devp, "reg", regs, 2*sizeof(u32)); - regs[0] -= 0x400000; - setprop(devp, "reg", regs, 2*sizeof(u32)); - - devp = finddevice("/plb/ebc/nor_flash@0/partition@1"); - if (!devp) - fatal("Can't find FDT node for partition@1"); - getprop(devp, "reg", regs, 2*sizeof(u32)); - regs[0] -= 0x400000; - setprop(devp, "reg", regs, 2*sizeof(u32)); - - devp = finddevice("/plb/ebc/nor_flash@0/partition@2"); - if (!devp) - fatal("Can't find FDT node for partition@2"); - getprop(devp, "reg", regs, 2*sizeof(u32)); - regs[0] -= 0x400000; - setprop(devp, "reg", regs, 2*sizeof(u32)); - - devp = finddevice("/plb/ebc/nor_flash@0/partition@3"); - if (!devp) - fatal("Can't find FDT node for partition@3"); - getprop(devp, "reg", regs, 2*sizeof(u32)); - regs[0] -= 0x400000; - setprop(devp, "reg", regs, 2*sizeof(u32)); - - devp = finddevice("/plb/ebc/nor_flash@0/partition@4"); - if (!devp) - fatal("Can't find FDT node for partition@4"); - getprop(devp, "reg", regs, 2*sizeof(u32)); - regs[0] -= 0x400000; - setprop(devp, "reg", regs, 2*sizeof(u32)); - - devp = finddevice("/plb/ebc/nor_flash@0/partition@6"); - if (!devp) - fatal("Can't find FDT node for partition@6"); - getprop(devp, "reg", regs, 2*sizeof(u32)); - regs[0] -= 0x400000; - setprop(devp, "reg", regs, 2*sizeof(u32)); - - /* Delete the FeatFS node */ - devp = finddevice("/plb/ebc/nor_flash@0/partition@5"); - if (!devp) - fatal("Can't find FDT node for partition@5"); - del_node(devp); - } -} - -void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - CUBOOT_INIT(); - platform_ops.fixups = hotfoot_fixups; - platform_ops.exit = ibm40x_dbcr_reset; - fdt_init(_dtb_start); - serial_console_init(); -} diff --git a/arch/powerpc/boot/cuboot-kilauea.c b/arch/powerpc/boot/cuboot-kilauea.c deleted file mode 100644 index fda182f518a2..000000000000 --- a/arch/powerpc/boot/cuboot-kilauea.c +++ /dev/null @@ -1,46 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Old U-boot compatibility for PPC405EX. This image is already included - * a dtb. - * - * Author: Tiejun Chen <tiejun.chen@windriver.com> - * - * Copyright (C) 2009 Wind River Systems, Inc. - */ - -#include "ops.h" -#include "io.h" -#include "dcr.h" -#include "stdio.h" -#include "4xx.h" -#include "44x.h" -#include "cuboot.h" - -#define TARGET_4xx -#define TARGET_44x -#include "ppcboot.h" - -#define KILAUEA_SYS_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */ - -static bd_t bd; - -static void kilauea_fixups(void) -{ - unsigned long sysclk = 33333333; - - ibm405ex_fixup_clocks(sysclk, KILAUEA_SYS_EXT_SERIAL_CLOCK); - dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); - ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); - dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); - dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); -} - -void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - CUBOOT_INIT(); - platform_ops.fixups = kilauea_fixups; - platform_ops.exit = ibm40x_dbcr_reset; - fdt_init(_dtb_start); - serial_console_init(); -} diff --git a/arch/powerpc/boot/cuboot-mpc7448hpc2.c b/arch/powerpc/boot/cuboot-mpc7448hpc2.c deleted file mode 100644 index 335fb65212e7..000000000000 --- a/arch/powerpc/boot/cuboot-mpc7448hpc2.c +++ /dev/null @@ -1,43 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. - * - * Author: Roy Zang <tie-fei.zang@freescale.com> - * - * Description: - * Old U-boot compatibility for mpc7448hpc2 board - * Based on the code of Scott Wood <scottwood@freescale.com> - * for 83xx and 85xx. - */ - -#include "ops.h" -#include "stdio.h" -#include "cuboot.h" - -#define TARGET_HAS_ETH1 -#include "ppcboot.h" - -static bd_t bd; -extern char _dtb_start[], _dtb_end[]; - -static void platform_fixups(void) -{ - void *tsi; - - dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); - dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr); - dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq); - tsi = find_node_by_devtype(NULL, "tsi-bridge"); - if (tsi) - setprop(tsi, "bus-frequency", &bd.bi_busfreq, - sizeof(bd.bi_busfreq)); -} - -void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - CUBOOT_INIT(); - fdt_init(_dtb_start); - serial_console_init(); - platform_ops.fixups = platform_fixups; -} diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h index 334ab8b5a668..91dc3a302cc8 100644 --- a/arch/powerpc/boot/dcr.h +++ b/arch/powerpc/boot/dcr.h @@ -153,17 +153,6 @@ static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR, #define CPR0_SCPID 0x120 #define CPR0_PLLC0 0x40 -/* 405GP Clocking/Power Management/Chip Control regs */ -#define DCRN_CPC0_PLLMR 0xb0 -#define DCRN_405_CPC0_CR0 0xb1 -#define DCRN_405_CPC0_CR1 0xb2 -#define DCRN_405_CPC0_PSR 0xb4 - -/* 405EP Clocking/Power Management/Chip Control regs */ -#define DCRN_CPC0_PLLMR0 0xf0 -#define DCRN_CPC0_PLLMR1 0xf4 -#define DCRN_CPC0_UCR 0xf5 - /* 440GX/405EX Clock Control reg */ #define DCRN_CPR0_CLKUPD 0x020 #define DCRN_CPR0_PLLC 0x040 diff --git a/arch/powerpc/boot/decompress.c b/arch/powerpc/boot/decompress.c index 977eb15a6d17..6835cb53f034 100644 --- a/arch/powerpc/boot/decompress.c +++ b/arch/powerpc/boot/decompress.c @@ -101,7 +101,7 @@ static void print_err(char *s) * @input_size: length of the input buffer * @outbuf: output buffer * @output_size: length of the output buffer - * @skip number of output bytes to ignore + * @_skip: number of output bytes to ignore * * This function takes compressed data from inbuf, decompresses and write it to * outbuf. Once output_size bytes are written to the output buffer, or the diff --git a/arch/powerpc/boot/dts/Makefile b/arch/powerpc/boot/dts/Makefile index fb335d05aae8..0cd0d8558b47 100644 --- a/arch/powerpc/boot/dts/Makefile +++ b/arch/powerpc/boot/dts/Makefile @@ -2,5 +2,4 @@ subdir-y += fsl -dtstree := $(srctree)/$(src) -dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) +dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(src)/%.dts,%.dtb, $(wildcard $(src)/*.dts)) diff --git a/arch/powerpc/boot/dts/acadia.dts b/arch/powerpc/boot/dts/acadia.dts deleted file mode 100644 index deb52e41ab84..000000000000 --- a/arch/powerpc/boot/dts/acadia.dts +++ /dev/null @@ -1,224 +0,0 @@ -/* - * Device Tree Source for AMCC Acadia (405EZ) - * - * Copyright IBM Corp. 2008 - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "amcc,acadia"; - compatible = "amcc,acadia"; - dcr-parent = <&{/cpus/cpu@0}>; - - aliases { - ethernet0 = &EMAC0; - serial0 = &UART0; - serial1 = &UART1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,405EZ"; - reg = <0x0>; - clock-frequency = <0>; /* Filled in by wrapper */ - timebase-frequency = <0>; /* Filled in by wrapper */ - i-cache-line-size = <32>; - d-cache-line-size = <32>; - i-cache-size = <16384>; - d-cache-size = <16384>; - dcr-controller; - dcr-access-method = "native"; - }; - }; - - memory { - device_type = "memory"; - reg = <0x0 0x0>; /* Filled in by wrapper */ - }; - - UIC0: interrupt-controller { - compatible = "ibm,uic-405ez", "ibm,uic"; - interrupt-controller; - dcr-reg = <0x0c0 0x009>; - cell-index = <0>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - }; - - plb { - compatible = "ibm,plb-405ez", "ibm,plb3"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clock-frequency = <0>; /* Filled in by wrapper */ - - MAL0: mcmal { - compatible = "ibm,mcmal-405ez", "ibm,mcmal"; - dcr-reg = <0x380 0x62>; - num-tx-chans = <1>; - num-rx-chans = <1>; - interrupt-parent = <&UIC0>; - /* 405EZ has only 3 interrupts to the UIC, as - * SERR, TXDE, and RXDE are or'd together into - * one UIC bit - */ - interrupts = < - 0x13 0x4 /* TXEOB */ - 0x15 0x4 /* RXEOB */ - 0x12 0x4 /* SERR, TXDE, RXDE */>; - }; - - POB0: opb { - compatible = "ibm,opb-405ez", "ibm,opb"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - dcr-reg = <0x0a 0x05>; - clock-frequency = <0>; /* Filled in by wrapper */ - - UART0: serial@ef600300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600300 0x8>; - virtual-reg = <0xef600300>; - clock-frequency = <0>; /* Filled in by wrapper */ - current-speed = <115200>; - interrupt-parent = <&UIC0>; - interrupts = <0x5 0x4>; - }; - - UART1: serial@ef600400 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600400 0x8>; - clock-frequency = <0>; /* Filled in by wrapper */ - current-speed = <115200>; - interrupt-parent = <&UIC0>; - interrupts = <0x6 0x4>; - }; - - IIC: i2c@ef600500 { - compatible = "ibm,iic-405ez", "ibm,iic"; - reg = <0xef600500 0x11>; - interrupt-parent = <&UIC0>; - interrupts = <0xa 0x4>; - }; - - GPIO0: gpio@ef600700 { - compatible = "ibm,gpio-405ez"; - reg = <0xef600700 0x20>; - }; - - GPIO1: gpio@ef600800 { - compatible = "ibm,gpio-405ez"; - reg = <0xef600800 0x20>; - }; - - EMAC0: ethernet@ef600900 { - device_type = "network"; - compatible = "ibm,emac-405ez", "ibm,emac"; - interrupt-parent = <&UIC0>; - interrupts = < - 0x10 0x4 /* Ethernet */ - 0x11 0x4 /* Ethernet Wake up */>; - local-mac-address = [000000000000]; /* Filled in by wrapper */ - reg = <0xef600900 0x70>; - mal-device = <&MAL0>; - mal-tx-channel = <0>; - mal-rx-channel = <0>; - cell-index = <0>; - max-frame-size = <1500>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - phy-mode = "mii"; - phy-map = <0x0>; - }; - - CAN0: can@ef601000 { - compatible = "amcc,can-405ez"; - reg = <0xef601000 0x620>; - interrupt-parent = <&UIC0>; - interrupts = <0x7 0x4>; - }; - - CAN1: can@ef601800 { - compatible = "amcc,can-405ez"; - reg = <0xef601800 0x620>; - interrupt-parent = <&UIC0>; - interrupts = <0x8 0x4>; - }; - - cameleon@ef602000 { - compatible = "amcc,cameleon-405ez"; - reg = <0xef602000 0x800>; - interrupt-parent = <&UIC0>; - interrupts = <0xb 0x4 0xc 0x4>; - }; - - ieee1588@ef602800 { - compatible = "amcc,ieee1588-405ez"; - reg = <0xef602800 0x60>; - interrupt-parent = <&UIC0>; - interrupts = <0x4 0x4>; - /* This thing is a bit weird. It has it's own UIC - * that it uses to generate snapshot triggers. We - * don't really support this device yet, and it needs - * work to figure this out. - */ - dcr-reg = <0xe0 0x9>; - }; - - usb@ef603000 { - compatible = "ohci-be"; - reg = <0xef603000 0x80>; - interrupt-parent = <&UIC0>; - interrupts = <0xd 0x4 0xe 0x4>; - }; - - dac@ef603300 { - compatible = "amcc,dac-405ez"; - reg = <0xef603300 0x40>; - interrupt-parent = <&UIC0>; - interrupts = <0x18 0x4>; - }; - - adc@ef603400 { - compatible = "amcc,adc-405ez"; - reg = <0xef603400 0x40>; - interrupt-parent = <&UIC0>; - interrupts = <0x17 0x4>; - }; - - spi@ef603500 { - compatible = "amcc,spi-405ez"; - reg = <0xef603500 0x100>; - interrupt-parent = <&UIC0>; - interrupts = <0x9 0x4>; - }; - }; - - EBC0: ebc { - compatible = "ibm,ebc-405ez", "ibm,ebc"; - dcr-reg = <0x12 0x2>; - #address-cells = <2>; - #size-cells = <1>; - clock-frequency = <0>; /* Filled in by wrapper */ - }; - }; - - chosen { - stdout-path = "/plb/opb/serial@ef600300"; - }; -}; diff --git a/arch/powerpc/boot/dts/akebono.dts b/arch/powerpc/boot/dts/akebono.dts index df18f8dc4642..343326c30380 100644 --- a/arch/powerpc/boot/dts/akebono.dts +++ b/arch/powerpc/boot/dts/akebono.dts @@ -126,7 +126,7 @@ interrupts = <93 2>; }; - EHCI0: ehci@30010000000 { + EHCI0: usb@30010000000 { compatible = "ibm,476gtr-ehci", "generic-ehci"; reg = <0x300 0x10000000 0x0 0x10000>; interrupt-parent = <&MPIC>; @@ -140,14 +140,14 @@ interrupt-parent = <&MPIC>; }; - OHCI0: ohci@30010010000 { + OHCI0: usb@30010010000 { compatible = "ibm,476gtr-ohci", "generic-ohci"; reg = <0x300 0x10010000 0x0 0x10000>; interrupt-parent = <&MPIC>; interrupts = <89 1>; }; - OHCI1: ohci@30010020000 { + OHCI1: usb@30010020000 { compatible = "ibm,476gtr-ohci", "generic-ohci"; reg = <0x300 0x10020000 0x0 0x10000>; interrupt-parent = <&MPIC>; diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts index 52a84561c4f0..33ddb17d1876 100644 --- a/arch/powerpc/boot/dts/asp834x-redboot.dts +++ b/arch/powerpc/boot/dts/asp834x-redboot.dts @@ -72,7 +72,7 @@ reg = <0xff000000 0x00000200>; bus-frequency = <0>; - wdt@200 { + watchdog@200 { device_type = "watchdog"; compatible = "mpc83xx_wdt"; reg = <0x200 0x100>; diff --git a/arch/powerpc/boot/dts/fsl/Makefile b/arch/powerpc/boot/dts/fsl/Makefile index 3bae982641e9..d3ecdf14bc42 100644 --- a/arch/powerpc/boot/dts/fsl/Makefile +++ b/arch/powerpc/boot/dts/fsl/Makefile @@ -1,4 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 -dtstree := $(srctree)/$(src) -dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) +dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(src)/%.dts,%.dtb, $(wildcard $(src)/*.dts)) diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi index 4f044b41a776..fb3200b006ad 100644 --- a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi @@ -50,7 +50,7 @@ &ifc { #address-cells = <2>; #size-cells = <1>; - compatible = "fsl,ifc", "simple-bus"; + compatible = "fsl,ifc"; interrupts = <25 2 0 0>; }; diff --git a/arch/powerpc/boot/dts/fsl/bsc9131rdb.dts b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dts index 8da984251abc..0ba86a6dce1b 100644 --- a/arch/powerpc/boot/dts/fsl/bsc9131rdb.dts +++ b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dts @@ -15,7 +15,7 @@ device_type = "memory"; }; - board_ifc: ifc: ifc@ff71e000 { + board_ifc: ifc: memory-controller@ff71e000 { /* NAND Flash on board */ ranges = <0x0 0x0 0x0 0xff800000 0x00004000>; reg = <0x0 0xff71e000 0x0 0x2000>; diff --git a/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi b/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi index 2a677fd323eb..5c53cee8755f 100644 --- a/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi @@ -35,7 +35,7 @@ &ifc { #address-cells = <2>; #size-cells = <1>; - compatible = "fsl,ifc", "simple-bus"; + compatible = "fsl,ifc"; interrupts = <16 2 0 0 20 2 0 0>; }; diff --git a/arch/powerpc/boot/dts/fsl/bsc9132qds.dts b/arch/powerpc/boot/dts/fsl/bsc9132qds.dts index 7cb2158dfe58..ce642e879a1b 100644 --- a/arch/powerpc/boot/dts/fsl/bsc9132qds.dts +++ b/arch/powerpc/boot/dts/fsl/bsc9132qds.dts @@ -15,7 +15,7 @@ device_type = "memory"; }; - ifc: ifc@ff71e000 { + ifc: memory-controller@ff71e000 { /* NOR, NAND Flash on board */ ranges = <0x0 0x0 0x0 0x88000000 0x08000000 0x1 0x0 0x0 0xff800000 0x00010000>; diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi index b8e0edd1ac69..4da451e000d9 100644 --- a/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi @@ -35,7 +35,7 @@ &ifc { #address-cells = <2>; #size-cells = <1>; - compatible = "fsl,ifc", "simple-bus"; + compatible = "fsl,ifc"; /* FIXME: Test whether interrupts are split */ interrupts = <16 2 0 0 20 2 0 0>; }; diff --git a/arch/powerpc/boot/dts/fsl/c293pcie.dts b/arch/powerpc/boot/dts/fsl/c293pcie.dts index 5e905e0857cf..e2fdac2ed420 100644 --- a/arch/powerpc/boot/dts/fsl/c293pcie.dts +++ b/arch/powerpc/boot/dts/fsl/c293pcie.dts @@ -42,7 +42,7 @@ device_type = "memory"; }; - ifc: ifc@fffe1e000 { + ifc: memory-controller@fffe1e000 { reg = <0xf 0xffe1e000 0 0x2000>; ranges = <0x0 0x0 0xf 0xec000000 0x04000000 0x1 0x0 0xf 0xff800000 0x00010000 diff --git a/arch/powerpc/boot/dts/fsl/c293si-post.dtsi b/arch/powerpc/boot/dts/fsl/c293si-post.dtsi index bec0fc36849d..2d443d519274 100644 --- a/arch/powerpc/boot/dts/fsl/c293si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/c293si-post.dtsi @@ -35,7 +35,7 @@ &ifc { #address-cells = <2>; #size-cells = <1>; - compatible = "fsl,ifc", "simple-bus"; + compatible = "fsl,ifc"; interrupts = <19 2 0 0>; }; @@ -124,10 +124,10 @@ reg = <0x80000 0x20000>; ranges = <0x0 0x80000 0x20000>; - jr@1000{ + jr@1000 { interrupts = <45 2 0 0>; }; - jr@2000{ + jr@2000 { interrupts = <57 2 0 0>; }; }; @@ -140,10 +140,10 @@ reg = <0xa0000 0x20000>; ranges = <0x0 0xa0000 0x20000>; - jr@1000{ + jr@1000 { interrupts = <49 2 0 0>; }; - jr@2000{ + jr@2000 { interrupts = <50 2 0 0>; }; }; @@ -156,10 +156,10 @@ reg = <0xc0000 0x20000>; ranges = <0x0 0xc0000 0x20000>; - jr@1000{ + jr@1000 { interrupts = <55 2 0 0>; }; - jr@2000{ + jr@2000 { interrupts = <56 2 0 0>; }; }; diff --git a/arch/powerpc/boot/dts/fsl/ge_imp3a.dts b/arch/powerpc/boot/dts/fsl/ge_imp3a.dts index da3de8e2b7d2..9e5c01cfac2f 100644 --- a/arch/powerpc/boot/dts/fsl/ge_imp3a.dts +++ b/arch/powerpc/boot/dts/fsl/ge_imp3a.dts @@ -94,7 +94,7 @@ gpio-controller; }; - wdt@4,800 { + watchdog@4,800 { compatible = "ge,imp3a-fpga-wdt", "gef,fpga-wdt-1.00", "gef,fpga-wdt"; reg = <0x4 0x800 0x8>; @@ -103,7 +103,7 @@ }; /* Second watchdog available, driver currently supports one. - wdt@4,808 { + watchdog@4,808 { compatible = "gef,imp3a-fpga-wdt", "gef,fpga-wdt-1.00", "gef,fpga-wdt"; reg = <0x4 0x808 0x8>; diff --git a/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts b/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts index fc92bb032c51..48a81430a8a3 100644 --- a/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts +++ b/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts @@ -82,7 +82,7 @@ reg = <0x4 0x0 0x40>; }; - wdt@4,2000 { + watchdog@4,2000 { compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00", "gef,fpga-wdt"; reg = <0x4 0x2000 0x8>; @@ -90,7 +90,7 @@ interrupt-parent = <&gef_pic>; }; /* Second watchdog available, driver currently supports one. - wdt@4,2010 { + watchdog@4,2010 { compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00", "gef,fpga-wdt"; reg = <0x4 0x2010 0x8>; diff --git a/arch/powerpc/boot/dts/fsl/gef_sbc310.dts b/arch/powerpc/boot/dts/fsl/gef_sbc310.dts index 47ae85c34635..8eb254b1738d 100644 --- a/arch/powerpc/boot/dts/fsl/gef_sbc310.dts +++ b/arch/powerpc/boot/dts/fsl/gef_sbc310.dts @@ -79,7 +79,7 @@ reg = <0x4 0x0 0x40>; }; - wdt@4,2000 { + watchdog@4,2000 { compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00", "gef,fpga-wdt"; reg = <0x4 0x2000 0x8>; @@ -87,7 +87,7 @@ interrupt-parent = <&gef_pic>; }; /* - wdt@4,2010 { + watchdog@4,2010 { compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00", "gef,fpga-wdt"; reg = <0x4 0x2010 0x8>; diff --git a/arch/powerpc/boot/dts/fsl/gef_sbc610.dts b/arch/powerpc/boot/dts/fsl/gef_sbc610.dts index 5322be44b62e..02edbb262b8f 100644 --- a/arch/powerpc/boot/dts/fsl/gef_sbc610.dts +++ b/arch/powerpc/boot/dts/fsl/gef_sbc610.dts @@ -82,14 +82,14 @@ reg = <0x4 0x0 0x40>; }; - wdt@4,2000 { + watchdog@4,2000 { compatible = "gef,fpga-wdt"; reg = <0x4 0x2000 0x8>; interrupts = <0x1a 0x4>; interrupt-parent = <&gef_pic>; }; /* Second watchdog available, driver currently supports one. - wdt@4,2010 { + watchdog@4,2010 { compatible = "gef,fpga-wdt"; reg = <0x4 0x2010 0x8>; interrupts = <0x1b 0x4>; diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi index 41935709ebe8..fba40a1bccc0 100644 --- a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi @@ -199,6 +199,10 @@ /include/ "pq3-dma-0.dtsi" /include/ "pq3-etsec1-0.dtsi" + enet0: ethernet@24000 { + fsl,wake-on-filer; + fsl,pmc-handle = <&etsec1_clk>; + }; /include/ "pq3-etsec1-timer-0.dtsi" usb@22000 { @@ -222,9 +226,10 @@ }; /include/ "pq3-etsec1-2.dtsi" - - ethernet@26000 { + enet2: ethernet@26000 { cell-index = <1>; + fsl,wake-on-filer; + fsl,pmc-handle = <&etsec3_clk>; }; usb@2b000 { @@ -249,4 +254,9 @@ reg = <0xe0000 0x1000>; fsl,has-rstcr; }; + +/include/ "pq3-power.dtsi" + power@e0070 { + compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc"; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/mpc8540ads.dts b/arch/powerpc/boot/dts/fsl/mpc8540ads.dts deleted file mode 100644 index e03ae130162b..000000000000 --- a/arch/powerpc/boot/dts/fsl/mpc8540ads.dts +++ /dev/null @@ -1,355 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * MPC8540 ADS Device Tree Source - * - * Copyright 2006, 2008 Freescale Semiconductor Inc. - */ - -/dts-v1/; - -/include/ "e500v1_power_isa.dtsi" - -/ { - model = "MPC8540ADS"; - compatible = "MPC8540ADS", "MPC85xxADS"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8540@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; // 33 MHz, from uboot - bus-frequency = <0>; // 166 MHz - clock-frequency = <0>; // 825 MHz, from uboot - next-level-cache = <&L2>; - }; - }; - - memory { - device_type = "memory"; - reg = <0x0 0x8000000>; // 128M at 0x0 - }; - - soc8540@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xe0000000 0x100000>; - bus-frequency = <0>; - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <8>; - }; - - ecm@1000 { - compatible = "fsl,mpc8540-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8540-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8540-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x40000>; // L2, 256K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8540-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8540-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8540-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8540-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x1>; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <7 1>; - reg = <0x3>; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet2: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <2>; - device_type = "network"; - model = "FEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <41 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi2>; - phy-handle = <&phy3>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4500 0x100>; // reg base, size - clock-frequency = <0>; // should we fill in in uboot? - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4600 0x100>; // reg base, size - clock-frequency = <0>; // should we fill in in uboot? - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - }; - - pci0: pci@e0008000 { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x02 */ - 0x1000 0x0 0x0 0x1 &mpic 0x1 0x1 - 0x1000 0x0 0x0 0x2 &mpic 0x2 0x1 - 0x1000 0x0 0x0 0x3 &mpic 0x3 0x1 - 0x1000 0x0 0x0 0x4 &mpic 0x4 0x1 - - /* IDSEL 0x03 */ - 0x1800 0x0 0x0 0x1 &mpic 0x4 0x1 - 0x1800 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x1800 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x1800 0x0 0x0 0x4 &mpic 0x3 0x1 - - /* IDSEL 0x04 */ - 0x2000 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x2000 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x2000 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x2000 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x05 */ - 0x2800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x2800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x2800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x2800 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x0c */ - 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1 - 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1 - 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1 - 0x6000 0x0 0x0 0x4 &mpic 0x4 0x1 - - /* IDSEL 0x0d */ - 0x6800 0x0 0x0 0x1 &mpic 0x4 0x1 - 0x6800 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x6800 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x6800 0x0 0x0 0x4 &mpic 0x3 0x1 - - /* IDSEL 0x0e */ - 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x7000 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x7000 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x7000 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x0f */ - 0x7800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x7800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x7800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x7800 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x12 */ - 0x9000 0x0 0x0 0x1 &mpic 0x1 0x1 - 0x9000 0x0 0x0 0x2 &mpic 0x2 0x1 - 0x9000 0x0 0x0 0x3 &mpic 0x3 0x1 - 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 - - /* IDSEL 0x13 */ - 0x9800 0x0 0x0 0x1 &mpic 0x4 0x1 - 0x9800 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x9800 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x9800 0x0 0x0 0x4 &mpic 0x3 0x1 - - /* IDSEL 0x14 */ - 0xa000 0x0 0x0 0x1 &mpic 0x3 0x1 - 0xa000 0x0 0x0 0x2 &mpic 0x4 0x1 - 0xa000 0x0 0x0 0x3 &mpic 0x1 0x1 - 0xa000 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x15 */ - 0xa800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0xa800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0xa800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>; - interrupt-parent = <&mpic>; - interrupts = <24 2>; - bus-range = <0 0>; - ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008000 0x1000>; - compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; - device_type = "pci"; - }; -}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8541cds.dts b/arch/powerpc/boot/dts/fsl/mpc8541cds.dts deleted file mode 100644 index a2a6c5cf852e..000000000000 --- a/arch/powerpc/boot/dts/fsl/mpc8541cds.dts +++ /dev/null @@ -1,375 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * MPC8541 CDS Device Tree Source - * - * Copyright 2006, 2008 Freescale Semiconductor Inc. - */ - -/dts-v1/; - -/include/ "e500v1_power_isa.dtsi" - -/ { - model = "MPC8541CDS"; - compatible = "MPC8541CDS", "MPC85xxCDS"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8541@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; // 33 MHz, from uboot - bus-frequency = <0>; // 166 MHz - clock-frequency = <0>; // 825 MHz, from uboot - next-level-cache = <&L2>; - }; - }; - - memory { - device_type = "memory"; - reg = <0x0 0x8000000>; // 128M at 0x0 - }; - - soc8541@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xe0000000 0x100000>; - bus-frequency = <0>; - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <8>; - }; - - ecm@1000 { - compatible = "fsl,mpc8541-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8541-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8541-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x40000>; // L2, 256K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8541-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8541-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8541-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8541-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x1>; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4500 0x100>; // reg base, size - clock-frequency = <0>; // should we fill in in uboot? - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4600 0x100>; // reg base, size - clock-frequency = <0>; // should we fill in in uboot? - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - crypto@30000 { - compatible = "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x7e>; - fsl,descriptor-types-mask = <0x01010ebf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - cpm@919c0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8541-cpm", "fsl,cpm2"; - reg = <0x919c0 0x30>; - ranges; - - muram@80000 { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x80000 0x10000>; - - data@0 { - compatible = "fsl,cpm-muram-data"; - reg = <0x0 0x2000 0x9000 0x1000>; - }; - }; - - brg@919f0 { - compatible = "fsl,mpc8541-brg", - "fsl,cpm2-brg", - "fsl,cpm-brg"; - reg = <0x919f0 0x10 0x915f0 0x10>; - }; - - cpmpic: pic@90c00 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - interrupts = <46 2>; - interrupt-parent = <&mpic>; - reg = <0x90c00 0x80>; - compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic"; - }; - }; - }; - - pci0: pci@e0008000 { - interrupt-map-mask = <0x1f800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x10 */ - 0x8000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x8000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x8000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x8000 0x0 0x0 0x4 &mpic 0x3 0x1 - - /* IDSEL 0x11 */ - 0x8800 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x8800 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x8800 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x8800 0x0 0x0 0x4 &mpic 0x3 0x1 - - /* IDSEL 0x12 (Slot 1) */ - 0x9000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x9000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x9000 0x0 0x0 0x4 &mpic 0x3 0x1 - - /* IDSEL 0x13 (Slot 2) */ - 0x9800 0x0 0x0 0x1 &mpic 0x1 0x1 - 0x9800 0x0 0x0 0x2 &mpic 0x2 0x1 - 0x9800 0x0 0x0 0x3 &mpic 0x3 0x1 - 0x9800 0x0 0x0 0x4 &mpic 0x0 0x1 - - /* IDSEL 0x14 (Slot 3) */ - 0xa000 0x0 0x0 0x1 &mpic 0x2 0x1 - 0xa000 0x0 0x0 0x2 &mpic 0x3 0x1 - 0xa000 0x0 0x0 0x3 &mpic 0x0 0x1 - 0xa000 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x15 (Slot 4) */ - 0xa800 0x0 0x0 0x1 &mpic 0x3 0x1 - 0xa800 0x0 0x0 0x2 &mpic 0x0 0x1 - 0xa800 0x0 0x0 0x3 &mpic 0x1 0x1 - 0xa800 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* Bus 1 (Tundra Bridge) */ - /* IDSEL 0x12 (ISA bridge) */ - 0x19000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x19000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x19000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>; - interrupt-parent = <&mpic>; - interrupts = <24 2>; - bus-range = <0 0>; - ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008000 0x1000>; - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; - - i8259@19000 { - interrupt-controller; - device_type = "interrupt-controller"; - reg = <0x19000 0x0 0x0 0x0 0x1>; - #address-cells = <0>; - #interrupt-cells = <2>; - compatible = "chrp,iic"; - interrupts = <1>; - interrupt-parent = <&pci0>; - }; - }; - - pci1: pci@e0009000 { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x15 */ - 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 - 0xa800 0x0 0x0 0x2 &mpic 0xb 0x1 - 0xa800 0x0 0x0 0x3 &mpic 0xb 0x1 - 0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>; - interrupt-parent = <&mpic>; - interrupts = <25 2>; - bus-range = <0 0>; - ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0009000 0x1000>; - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; - }; -}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi index b68eb119faef..ea7416af7ee3 100644 --- a/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi @@ -188,4 +188,6 @@ reg = <0xe0000 0x1000>; fsl,has-rstcr; }; + +/include/ "pq3-power.dtsi" }; diff --git a/arch/powerpc/boot/dts/fsl/mpc8548cds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548cds.dtsi deleted file mode 100644 index 3bc7d4711220..000000000000 --- a/arch/powerpc/boot/dts/fsl/mpc8548cds.dtsi +++ /dev/null @@ -1,302 +0,0 @@ -/* - * MPC8548CDS Device Tree Source stub (no addresses or top-level ranges) - * - * Copyright 2012 Freescale Semiconductor Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Freescale Semiconductor nor the - * names of its contributors may be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation, either version 2 of that License or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY - * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -&board_lbc { - nor@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x0 0x0 0x01000000>; - bank-width = <2>; - device-width = <2>; - - partition@0 { - reg = <0x0 0x0b00000>; - label = "ramdisk-nor"; - }; - - partition@300000 { - reg = <0x0b00000 0x0400000>; - label = "kernel-nor"; - }; - - partition@700000 { - reg = <0x0f00000 0x060000>; - label = "dtb-nor"; - }; - - partition@760000 { - reg = <0x0f60000 0x020000>; - label = "env-nor"; - read-only; - }; - - partition@780000 { - reg = <0x0f80000 0x080000>; - label = "u-boot-nor"; - read-only; - }; - }; - - board-control@1,0 { - compatible = "fsl,mpc8548cds-fpga"; - reg = <0x1 0x0 0x1000>; - }; -}; - -&board_soc { - i2c@3000 { - eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - }; - - eeprom@56 { - compatible = "atmel,24c64"; - reg = <0x56>; - }; - - eeprom@57 { - compatible = "atmel,24c64"; - reg = <0x57>; - }; - }; - - i2c@3100 { - eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - }; - }; - - enet0: ethernet@24000 { - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - }; - - mdio@24520 { - phy0: ethernet-phy@0 { - interrupts = <5 1 0 0>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupts = <5 1 0 0>; - reg = <0x1>; - }; - phy2: ethernet-phy@2 { - interrupts = <5 1 0 0>; - reg = <0x2>; - }; - phy3: ethernet-phy@3 { - interrupts = <5 1 0 0>; - reg = <0x3>; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet1: ethernet@25000 { - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - }; - - mdio@25520 { - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet2: ethernet@26000 { - tbi-handle = <&tbi2>; - phy-handle = <&phy2>; - }; - - mdio@26520 { - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet3: ethernet@27000 { - tbi-handle = <&tbi3>; - phy-handle = <&phy3>; - }; - - mdio@27520 { - tbi3: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; -}; - -&board_pci0 { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x4 (PCIX Slot 2) */ - 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0x5 (PCIX Slot 3) */ - 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 - 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0 - 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0 - 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0 - - /* IDSEL 0x6 (PCIX Slot 4) */ - 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 - 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 - 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 - 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 - - /* IDSEL 0x8 (PCIX Slot 5) */ - 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0xC (Tsi310 bridge) */ - 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0x14 (Slot 2) */ - 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0x15 (Slot 3) */ - 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 - 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0 - 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0 - 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0 - - /* IDSEL 0x16 (Slot 4) */ - 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 - 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 - 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 - 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 - - /* IDSEL 0x18 (Slot 5) */ - 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0x1C (Tsi310 bridge PCI primary) */ - 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; - - pci_bridge@1c { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x00 (PrPMC Site) */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0x04 (VIA chip) */ - 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0x05 (8139) */ - 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 - - /* IDSEL 0x06 (Slot 6) */ - 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 - 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 - 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 - 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 - - /* IDESL 0x07 (Slot 7) */ - 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 - 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0 - 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 - 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>; - - reg = <0xe000 0x0 0x0 0x0 0x0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <0x2000000 0x0 0x80000000 - 0x2000000 0x0 0x80000000 - 0x0 0x20000000 - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x80000>; - clock-frequency = <33333333>; - - isa@4 { - device_type = "isa"; - #interrupt-cells = <2>; - #size-cells = <1>; - #address-cells = <2>; - reg = <0x2000 0x0 0x0 0x0 0x0>; - ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>; - interrupt-parent = <&i8259>; - - i8259: interrupt-controller@20 { - interrupt-controller; - device_type = "interrupt-controller"; - reg = <0x1 0x20 0x2 - 0x1 0xa0 0x2 - 0x1 0x4d0 0x2>; - #address-cells = <0>; - #interrupt-cells = <2>; - compatible = "chrp,iic"; - interrupts = <0 1 0 0>; - interrupt-parent = <&mpic>; - }; - - rtc@70 { - compatible = "pnpPNP,b00"; - reg = <0x1 0x70 0x2>; - }; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8548cds_32b.dts b/arch/powerpc/boot/dts/fsl/mpc8548cds_32b.dts deleted file mode 100644 index f6ba4a982766..000000000000 --- a/arch/powerpc/boot/dts/fsl/mpc8548cds_32b.dts +++ /dev/null @@ -1,82 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * MPC8548 CDS Device Tree Source (32-bit address map) - * - * Copyright 2006, 2008, 2011-2012 Freescale Semiconductor Inc. - */ - -/include/ "mpc8548si-pre.dtsi" - -/ { - model = "MPC8548CDS"; - compatible = "MPC8548CDS", "MPC85xxCDS"; - - memory { - device_type = "memory"; - reg = <0 0 0x0 0x8000000>; // 128M at 0x0 - }; - - board_lbc: lbc: localbus@e0005000 { - reg = <0 0xe0005000 0 0x1000>; - - ranges = <0x0 0x0 0x0 0xff000000 0x01000000 - 0x1 0x0 0x0 0xf8004000 0x00001000>; - - }; - - board_soc: soc: soc8548@e0000000 { - ranges = <0 0x0 0xe0000000 0x100000>; - }; - - board_pci0: pci0: pci@e0008000 { - reg = <0 0xe0008000 0 0x1000>; - ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000 - 0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>; - clock-frequency = <66666666>; - }; - - pci1: pci@e0009000 { - reg = <0 0xe0009000 0 0x1000>; - ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000 - 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>; - clock-frequency = <66666666>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x15 */ - 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0 - 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; - }; - - pci2: pcie@e000a000 { - reg = <0 0xe000a000 0 0x1000>; - ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>; - pcie@0 { - ranges = <0x2000000 0x0 0xa0000000 - 0x2000000 0x0 0xa0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; - - rio: rapidio@e00c0000 { - reg = <0x0 0xe00c0000 0x0 0x20000>; - port1 { - ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>; - }; - }; -}; - -/* - * mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings - * for interrupt-map & interrupt-map-mask. - */ - -/include/ "mpc8548si-post.dtsi" -/include/ "mpc8548cds.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/mpc8548cds_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8548cds_36b.dts deleted file mode 100644 index 32e9076375ae..000000000000 --- a/arch/powerpc/boot/dts/fsl/mpc8548cds_36b.dts +++ /dev/null @@ -1,82 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * MPC8548 CDS Device Tree Source (36-bit address map) - * - * Copyright 2012 Freescale Semiconductor Inc. - */ - -/include/ "mpc8548si-pre.dtsi" - -/ { - model = "MPC8548CDS"; - compatible = "MPC8548CDS", "MPC85xxCDS"; - - memory { - device_type = "memory"; - reg = <0 0 0x0 0x8000000>; // 128M at 0x0 - }; - - board_lbc: lbc: localbus@fe0005000 { - reg = <0xf 0xe0005000 0 0x1000>; - - ranges = <0x0 0x0 0xf 0xff000000 0x01000000 - 0x1 0x0 0xf 0xf8004000 0x00001000>; - - }; - - board_soc: soc: soc8548@fe0000000 { - ranges = <0 0xf 0xe0000000 0x100000>; - }; - - board_pci0: pci0: pci@fe0008000 { - reg = <0xf 0xe0008000 0 0x1000>; - ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x10000000 - 0x1000000 0x0 0x00000000 0xf 0xe2000000 0x0 0x800000>; - clock-frequency = <66666666>; - }; - - pci1: pci@fe0009000 { - reg = <0xf 0xe0009000 0 0x1000>; - ranges = <0x2000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000 - 0x1000000 0x0 0x00000000 0xf 0xe2800000 0x0 0x800000>; - clock-frequency = <66666666>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x15 */ - 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0 - 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; - }; - - pci2: pcie@fe000a000 { - reg = <0xf 0xe000a000 0 0x1000>; - ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0xf 0xe3000000 0x0 0x100000>; - pcie@0 { - ranges = <0x2000000 0x0 0xa0000000 - 0x2000000 0x0 0xa0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; - - rio: rapidio@fe00c0000 { - reg = <0xf 0xe00c0000 0x0 0x20000>; - port1 { - ranges = <0x0 0x0 0xc 0x40000000 0x0 0x20000000>; - }; - }; -}; - -/* - * mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings - * for interrupt-map & interrupt-map-mask. - */ - -/include/ "mpc8548si-post.dtsi" -/include/ "mpc8548cds.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi index 579d76cb8e32..dddb7374508d 100644 --- a/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi @@ -156,4 +156,6 @@ reg = <0xe0000 0x1000>; fsl,has-rstcr; }; + +/include/ "pq3-power.dtsi" }; diff --git a/arch/powerpc/boot/dts/fsl/mpc8555cds.dts b/arch/powerpc/boot/dts/fsl/mpc8555cds.dts deleted file mode 100644 index 901b6ff06dfb..000000000000 --- a/arch/powerpc/boot/dts/fsl/mpc8555cds.dts +++ /dev/null @@ -1,375 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * MPC8555 CDS Device Tree Source - * - * Copyright 2006, 2008 Freescale Semiconductor Inc. - */ - -/dts-v1/; - -/include/ "e500v1_power_isa.dtsi" - -/ { - model = "MPC8555CDS"; - compatible = "MPC8555CDS", "MPC85xxCDS"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8555@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; // 33 MHz, from uboot - bus-frequency = <0>; // 166 MHz - clock-frequency = <0>; // 825 MHz, from uboot - next-level-cache = <&L2>; - }; - }; - - memory { - device_type = "memory"; - reg = <0x0 0x8000000>; // 128M at 0x0 - }; - - soc8555@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xe0000000 0x100000>; - bus-frequency = <0>; - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <8>; - }; - - ecm@1000 { - compatible = "fsl,mpc8555-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8555-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8555-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x40000>; // L2, 256K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8555-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8555-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8555-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8555-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x1>; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4500 0x100>; // reg base, size - clock-frequency = <0>; // should we fill in in uboot? - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4600 0x100>; // reg base, size - clock-frequency = <0>; // should we fill in in uboot? - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - crypto@30000 { - compatible = "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x7e>; - fsl,descriptor-types-mask = <0x01010ebf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - cpm@919c0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8555-cpm", "fsl,cpm2"; - reg = <0x919c0 0x30>; - ranges; - - muram@80000 { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x80000 0x10000>; - - data@0 { - compatible = "fsl,cpm-muram-data"; - reg = <0x0 0x2000 0x9000 0x1000>; - }; - }; - - brg@919f0 { - compatible = "fsl,mpc8555-brg", - "fsl,cpm2-brg", - "fsl,cpm-brg"; - reg = <0x919f0 0x10 0x915f0 0x10>; - }; - - cpmpic: pic@90c00 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - interrupts = <46 2>; - interrupt-parent = <&mpic>; - reg = <0x90c00 0x80>; - compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic"; - }; - }; - }; - - pci0: pci@e0008000 { - interrupt-map-mask = <0x1f800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x10 */ - 0x8000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x8000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x8000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x8000 0x0 0x0 0x4 &mpic 0x3 0x1 - - /* IDSEL 0x11 */ - 0x8800 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x8800 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x8800 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x8800 0x0 0x0 0x4 &mpic 0x3 0x1 - - /* IDSEL 0x12 (Slot 1) */ - 0x9000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x9000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x9000 0x0 0x0 0x4 &mpic 0x3 0x1 - - /* IDSEL 0x13 (Slot 2) */ - 0x9800 0x0 0x0 0x1 &mpic 0x1 0x1 - 0x9800 0x0 0x0 0x2 &mpic 0x2 0x1 - 0x9800 0x0 0x0 0x3 &mpic 0x3 0x1 - 0x9800 0x0 0x0 0x4 &mpic 0x0 0x1 - - /* IDSEL 0x14 (Slot 3) */ - 0xa000 0x0 0x0 0x1 &mpic 0x2 0x1 - 0xa000 0x0 0x0 0x2 &mpic 0x3 0x1 - 0xa000 0x0 0x0 0x3 &mpic 0x0 0x1 - 0xa000 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x15 (Slot 4) */ - 0xa800 0x0 0x0 0x1 &mpic 0x3 0x1 - 0xa800 0x0 0x0 0x2 &mpic 0x0 0x1 - 0xa800 0x0 0x0 0x3 &mpic 0x1 0x1 - 0xa800 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* Bus 1 (Tundra Bridge) */ - /* IDSEL 0x12 (ISA bridge) */ - 0x19000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x19000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x19000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>; - interrupt-parent = <&mpic>; - interrupts = <24 2>; - bus-range = <0 0>; - ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008000 0x1000>; - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; - - i8259@19000 { - interrupt-controller; - device_type = "interrupt-controller"; - reg = <0x19000 0x0 0x0 0x0 0x1>; - #address-cells = <0>; - #interrupt-cells = <2>; - compatible = "chrp,iic"; - interrupts = <1>; - interrupt-parent = <&pci0>; - }; - }; - - pci1: pci@e0009000 { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x15 */ - 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 - 0xa800 0x0 0x0 0x2 &mpic 0xb 0x1 - 0xa800 0x0 0x0 0x3 &mpic 0xb 0x1 - 0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>; - interrupt-parent = <&mpic>; - interrupts = <25 2>; - bus-range = <0 0>; - ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0009000 0x1000>; - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; - }; -}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8560ads.dts b/arch/powerpc/boot/dts/fsl/mpc8560ads.dts deleted file mode 100644 index c2f9aea78b29..000000000000 --- a/arch/powerpc/boot/dts/fsl/mpc8560ads.dts +++ /dev/null @@ -1,388 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * MPC8560 ADS Device Tree Source - * - * Copyright 2006, 2008 Freescale Semiconductor Inc. - */ - -/dts-v1/; - -/include/ "e500v1_power_isa.dtsi" - -/ { - model = "MPC8560ADS"; - compatible = "MPC8560ADS", "MPC85xxADS"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; - ethernet3 = &enet3; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8560@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <82500000>; - bus-frequency = <330000000>; - clock-frequency = <825000000>; - }; - }; - - memory { - device_type = "memory"; - reg = <0x0 0x10000000>; - }; - - soc8560@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xe0000000 0x100000>; - bus-frequency = <330000000>; - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <8>; - }; - - ecm@1000 { - compatible = "fsl,mpc8560-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8540-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8540-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x40000>; // L2, 256K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8560-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8560-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8560-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8560-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x1>; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <7 1>; - reg = <0x2>; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <7 1>; - reg = <0x3>; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - cpm@919c0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8560-cpm", "fsl,cpm2"; - reg = <0x919c0 0x30>; - ranges; - - muram@80000 { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x80000 0x10000>; - - data@0 { - compatible = "fsl,cpm-muram-data"; - reg = <0x0 0x4000 0x9000 0x2000>; - }; - }; - - brg@919f0 { - compatible = "fsl,mpc8560-brg", - "fsl,cpm2-brg", - "fsl,cpm-brg"; - reg = <0x919f0 0x10 0x915f0 0x10>; - clock-frequency = <165000000>; - }; - - cpmpic: pic@90c00 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - interrupts = <46 2>; - interrupt-parent = <&mpic>; - reg = <0x90c00 0x80>; - compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic"; - }; - - serial0: serial@91a00 { - device_type = "serial"; - compatible = "fsl,mpc8560-scc-uart", - "fsl,cpm2-scc-uart"; - reg = <0x91a00 0x20 0x88000 0x100>; - fsl,cpm-brg = <1>; - fsl,cpm-command = <0x800000>; - current-speed = <115200>; - interrupts = <40 8>; - interrupt-parent = <&cpmpic>; - }; - - serial1: serial@91a20 { - device_type = "serial"; - compatible = "fsl,mpc8560-scc-uart", - "fsl,cpm2-scc-uart"; - reg = <0x91a20 0x20 0x88100 0x100>; - fsl,cpm-brg = <2>; - fsl,cpm-command = <0x4a00000>; - current-speed = <115200>; - interrupts = <41 8>; - interrupt-parent = <&cpmpic>; - }; - - enet2: ethernet@91320 { - device_type = "network"; - compatible = "fsl,mpc8560-fcc-enet", - "fsl,cpm2-fcc-enet"; - reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>; - local-mac-address = [ 00 00 00 00 00 00 ]; - fsl,cpm-command = <0x16200300>; - interrupts = <33 8>; - interrupt-parent = <&cpmpic>; - phy-handle = <&phy2>; - }; - - enet3: ethernet@91340 { - device_type = "network"; - compatible = "fsl,mpc8560-fcc-enet", - "fsl,cpm2-fcc-enet"; - reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>; - local-mac-address = [ 00 00 00 00 00 00 ]; - fsl,cpm-command = <0x1a400300>; - interrupts = <34 8>; - interrupt-parent = <&cpmpic>; - phy-handle = <&phy3>; - }; - }; - }; - - pci0: pci@e0008000 { - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; - device_type = "pci"; - reg = <0xe0008000 0x1000>; - clock-frequency = <66666666>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x2 */ - 0x1000 0x0 0x0 0x1 &mpic 0x1 0x1 - 0x1000 0x0 0x0 0x2 &mpic 0x2 0x1 - 0x1000 0x0 0x0 0x3 &mpic 0x3 0x1 - 0x1000 0x0 0x0 0x4 &mpic 0x4 0x1 - - /* IDSEL 0x3 */ - 0x1800 0x0 0x0 0x1 &mpic 0x4 0x1 - 0x1800 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x1800 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x1800 0x0 0x0 0x4 &mpic 0x3 0x1 - - /* IDSEL 0x4 */ - 0x2000 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x2000 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x2000 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x2000 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x5 */ - 0x2800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x2800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x2800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x2800 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 12 */ - 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1 - 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1 - 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1 - 0x6000 0x0 0x0 0x4 &mpic 0x4 0x1 - - /* IDSEL 13 */ - 0x6800 0x0 0x0 0x1 &mpic 0x4 0x1 - 0x6800 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x6800 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x6800 0x0 0x0 0x4 &mpic 0x3 0x1 - - /* IDSEL 14*/ - 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x7000 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x7000 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x7000 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 15 */ - 0x7800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x7800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x7800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x7800 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 18 */ - 0x9000 0x0 0x0 0x1 &mpic 0x1 0x1 - 0x9000 0x0 0x0 0x2 &mpic 0x2 0x1 - 0x9000 0x0 0x0 0x3 &mpic 0x3 0x1 - 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 - - /* IDSEL 19 */ - 0x9800 0x0 0x0 0x1 &mpic 0x4 0x1 - 0x9800 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x9800 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x9800 0x0 0x0 0x4 &mpic 0x3 0x1 - - /* IDSEL 20 */ - 0xa000 0x0 0x0 0x1 &mpic 0x3 0x1 - 0xa000 0x0 0x0 0x2 &mpic 0x4 0x1 - 0xa000 0x0 0x0 0x3 &mpic 0x1 0x1 - 0xa000 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 21 */ - 0xa800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0xa800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0xa800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>; - - interrupt-parent = <&mpic>; - interrupts = <24 2>; - bus-range = <0 0>; - ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xe2000000 0x0 0x1000000>; - }; -}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi index 49294cf36b4e..40a6cff77032 100644 --- a/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi @@ -193,4 +193,6 @@ reg = <0xe0000 0x1000>; fsl,has-rstcr; }; + +/include/ "pq3-power.dtsi" }; diff --git a/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts deleted file mode 100644 index f7a2430d6629..000000000000 --- a/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts +++ /dev/null @@ -1,394 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * MPC8641 HPCN Device Tree Source - * - * Copyright 2006 Freescale Semiconductor Inc. - */ - -/include/ "mpc8641si-pre.dtsi" - -/ { - model = "MPC8641HPCN"; - compatible = "fsl,mpc8641hpcn"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x40000000>; // 1G at 0x0 - }; - - lbc: localbus@ffe05000 { - reg = <0xffe05000 0x1000>; - - ranges = <0 0 0xef800000 0x00800000 - 2 0 0xffdf8000 0x00008000 - 3 0 0xffdf0000 0x00008000>; - - flash@0,0 { - compatible = "cfi-flash"; - reg = <0 0 0x00800000>; - bank-width = <2>; - device-width = <2>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "kernel"; - reg = <0x00000000 0x00300000>; - }; - partition@300000 { - label = "firmware b"; - reg = <0x00300000 0x00100000>; - read-only; - }; - partition@400000 { - label = "fs"; - reg = <0x00400000 0x00300000>; - }; - partition@700000 { - label = "firmware a"; - reg = <0x00700000 0x00100000>; - read-only; - }; - }; - }; - - soc: soc8641@ffe00000 { - ranges = <0x00000000 0xffe00000 0x00100000>; - - enet0: ethernet@24000 { - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; - }; - - mdio@24520 { - phy0: ethernet-phy@0 { - interrupts = <10 1 0 0>; - reg = <0>; - }; - phy1: ethernet-phy@1 { - interrupts = <10 1 0 0>; - reg = <1>; - }; - phy2: ethernet-phy@2 { - interrupts = <10 1 0 0>; - reg = <2>; - }; - phy3: ethernet-phy@3 { - interrupts = <10 1 0 0>; - reg = <3>; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet1: ethernet@25000 { - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - }; - - mdio@25520 { - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet2: ethernet@26000 { - tbi-handle = <&tbi2>; - phy-handle = <&phy2>; - phy-connection-type = "rgmii-id"; - }; - - mdio@26520 { - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet3: ethernet@27000 { - tbi-handle = <&tbi3>; - phy-handle = <&phy3>; - phy-connection-type = "rgmii-id"; - }; - - mdio@27520 { - tbi3: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - rmu: rmu@d3000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,srio-rmu"; - reg = <0xd3000 0x500>; - ranges = <0x0 0xd3000 0x500>; - - message-unit@0 { - compatible = "fsl,srio-msg-unit"; - reg = <0x0 0x100>; - interrupts = < - 53 2 0 0 /* msg1_tx_irq */ - 54 2 0 0>;/* msg1_rx_irq */ - }; - message-unit@100 { - compatible = "fsl,srio-msg-unit"; - reg = <0x100 0x100>; - interrupts = < - 55 2 0 0 /* msg2_tx_irq */ - 56 2 0 0>;/* msg2_rx_irq */ - }; - doorbell-unit@400 { - compatible = "fsl,srio-dbell-unit"; - reg = <0x400 0x80>; - interrupts = < - 49 2 0 0 /* bell_outb_irq */ - 50 2 0 0>;/* bell_inb_irq */ - }; - port-write-unit@4e0 { - compatible = "fsl,srio-port-write-unit"; - reg = <0x4e0 0x20>; - interrupts = <48 2 0 0>; - }; - }; - }; - - pci0: pcie@ffe08000 { - reg = <0xffe08000 0x1000>; - ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000 - 0x01000000 0x0 0x00000000 0xffc00000 0x0 0x00010000>; - interrupt-map-mask = <0xff00 0 0 7>; - interrupt-map = < - /* IDSEL 0x11 func 0 - PCI slot 1 */ - 0x8800 0 0 1 &mpic 2 1 0 0 - 0x8800 0 0 2 &mpic 3 1 0 0 - 0x8800 0 0 3 &mpic 4 1 0 0 - 0x8800 0 0 4 &mpic 1 1 0 0 - - /* IDSEL 0x11 func 1 - PCI slot 1 */ - 0x8900 0 0 1 &mpic 2 1 0 0 - 0x8900 0 0 2 &mpic 3 1 0 0 - 0x8900 0 0 3 &mpic 4 1 0 0 - 0x8900 0 0 4 &mpic 1 1 0 0 - - /* IDSEL 0x11 func 2 - PCI slot 1 */ - 0x8a00 0 0 1 &mpic 2 1 0 0 - 0x8a00 0 0 2 &mpic 3 1 0 0 - 0x8a00 0 0 3 &mpic 4 1 0 0 - 0x8a00 0 0 4 &mpic 1 1 0 0 - - /* IDSEL 0x11 func 3 - PCI slot 1 */ - 0x8b00 0 0 1 &mpic 2 1 0 0 - 0x8b00 0 0 2 &mpic 3 1 0 0 - 0x8b00 0 0 3 &mpic 4 1 0 0 - 0x8b00 0 0 4 &mpic 1 1 0 0 - - /* IDSEL 0x11 func 4 - PCI slot 1 */ - 0x8c00 0 0 1 &mpic 2 1 0 0 - 0x8c00 0 0 2 &mpic 3 1 0 0 - 0x8c00 0 0 3 &mpic 4 1 0 0 - 0x8c00 0 0 4 &mpic 1 1 0 0 - - /* IDSEL 0x11 func 5 - PCI slot 1 */ - 0x8d00 0 0 1 &mpic 2 1 0 0 - 0x8d00 0 0 2 &mpic 3 1 0 0 - 0x8d00 0 0 3 &mpic 4 1 0 0 - 0x8d00 0 0 4 &mpic 1 1 0 0 - - /* IDSEL 0x11 func 6 - PCI slot 1 */ - 0x8e00 0 0 1 &mpic 2 1 0 0 - 0x8e00 0 0 2 &mpic 3 1 0 0 - 0x8e00 0 0 3 &mpic 4 1 0 0 - 0x8e00 0 0 4 &mpic 1 1 0 0 - - /* IDSEL 0x11 func 7 - PCI slot 1 */ - 0x8f00 0 0 1 &mpic 2 1 0 0 - 0x8f00 0 0 2 &mpic 3 1 0 0 - 0x8f00 0 0 3 &mpic 4 1 0 0 - 0x8f00 0 0 4 &mpic 1 1 0 0 - - /* IDSEL 0x12 func 0 - PCI slot 2 */ - 0x9000 0 0 1 &mpic 3 1 0 0 - 0x9000 0 0 2 &mpic 4 1 0 0 - 0x9000 0 0 3 &mpic 1 1 0 0 - 0x9000 0 0 4 &mpic 2 1 0 0 - - /* IDSEL 0x12 func 1 - PCI slot 2 */ - 0x9100 0 0 1 &mpic 3 1 0 0 - 0x9100 0 0 2 &mpic 4 1 0 0 - 0x9100 0 0 3 &mpic 1 1 0 0 - 0x9100 0 0 4 &mpic 2 1 0 0 - - /* IDSEL 0x12 func 2 - PCI slot 2 */ - 0x9200 0 0 1 &mpic 3 1 0 0 - 0x9200 0 0 2 &mpic 4 1 0 0 - 0x9200 0 0 3 &mpic 1 1 0 0 - 0x9200 0 0 4 &mpic 2 1 0 0 - - /* IDSEL 0x12 func 3 - PCI slot 2 */ - 0x9300 0 0 1 &mpic 3 1 0 0 - 0x9300 0 0 2 &mpic 4 1 0 0 - 0x9300 0 0 3 &mpic 1 1 0 0 - 0x9300 0 0 4 &mpic 2 1 0 0 - - /* IDSEL 0x12 func 4 - PCI slot 2 */ - 0x9400 0 0 1 &mpic 3 1 0 0 - 0x9400 0 0 2 &mpic 4 1 0 0 - 0x9400 0 0 3 &mpic 1 1 0 0 - 0x9400 0 0 4 &mpic 2 1 0 0 - - /* IDSEL 0x12 func 5 - PCI slot 2 */ - 0x9500 0 0 1 &mpic 3 1 0 0 - 0x9500 0 0 2 &mpic 4 1 0 0 - 0x9500 0 0 3 &mpic 1 1 0 0 - 0x9500 0 0 4 &mpic 2 1 0 0 - - /* IDSEL 0x12 func 6 - PCI slot 2 */ - 0x9600 0 0 1 &mpic 3 1 0 0 - 0x9600 0 0 2 &mpic 4 1 0 0 - 0x9600 0 0 3 &mpic 1 1 0 0 - 0x9600 0 0 4 &mpic 2 1 0 0 - - /* IDSEL 0x12 func 7 - PCI slot 2 */ - 0x9700 0 0 1 &mpic 3 1 0 0 - 0x9700 0 0 2 &mpic 4 1 0 0 - 0x9700 0 0 3 &mpic 1 1 0 0 - 0x9700 0 0 4 &mpic 2 1 0 0 - - // IDSEL 0x1c USB - 0xe000 0 0 1 &i8259 12 2 - 0xe100 0 0 2 &i8259 9 2 - 0xe200 0 0 3 &i8259 10 2 - 0xe300 0 0 4 &i8259 11 2 - - // IDSEL 0x1d Audio - 0xe800 0 0 1 &i8259 6 2 - - // IDSEL 0x1e Legacy - 0xf000 0 0 1 &i8259 7 2 - 0xf100 0 0 1 &i8259 7 2 - - // IDSEL 0x1f IDE/SATA - 0xf800 0 0 1 &i8259 14 2 - 0xf900 0 0 1 &i8259 5 2 - >; - - pcie@0 { - ranges = <0x02000000 0x0 0x80000000 - 0x02000000 0x0 0x80000000 - 0x0 0x20000000 - - 0x01000000 0x0 0x00000000 - 0x01000000 0x0 0x00000000 - 0x0 0x00010000>; - uli1575@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <0x02000000 0x0 0x80000000 - 0x02000000 0x0 0x80000000 - 0x0 0x20000000 - 0x01000000 0x0 0x00000000 - 0x01000000 0x0 0x00000000 - 0x0 0x00010000>; - isa@1e { - device_type = "isa"; - #size-cells = <1>; - #address-cells = <2>; - reg = <0xf000 0 0 0 0>; - ranges = <1 0 0x01000000 0 0 - 0x00001000>; - interrupt-parent = <&i8259>; - - i8259: interrupt-controller@20 { - reg = <1 0x20 2 - 1 0xa0 2 - 1 0x4d0 2>; - interrupt-controller; - device_type = "interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <2>; - compatible = "chrp,iic"; - interrupts = <9 2 0 0>; - }; - - i8042@60 { - #size-cells = <0>; - #address-cells = <1>; - reg = <1 0x60 1 1 0x64 1>; - interrupts = <1 3 12 3>; - interrupt-parent = <&i8259>; - - keyboard@0 { - reg = <0>; - compatible = "pnpPNP,303"; - }; - - mouse@1 { - reg = <1>; - compatible = "pnpPNP,f03"; - }; - }; - - rtc@70 { - compatible = - "pnpPNP,b00"; - reg = <1 0x70 2>; - }; - - gpio@400 { - reg = <1 0x400 0x80>; - }; - }; - }; - }; - - }; - - pci1: pcie@ffe09000 { - reg = <0xffe09000 0x1000>; - ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 - 0x01000000 0x0 0x00000000 0xffc10000 0x0 0x00010000>; - - pcie@0 { - ranges = <0x02000000 0x0 0xa0000000 - 0x02000000 0x0 0xa0000000 - 0x0 0x20000000 - - 0x01000000 0x0 0x00000000 - 0x01000000 0x0 0x00000000 - 0x0 0x00010000>; - }; - }; -/* - * Only one of Rapid IO or PCI can be present due to HW limitations and - * due to the fact that the 2 now share address space in the new memory - * map. The most likely case is that we have PCI, so comment out the - * rapidio node. Leave it here for reference. - - rapidio@ffec0000 { - reg = <0xffec0000 0x11000>; - compatible = "fsl,srio"; - interrupts = <48 2 0 0>; - #address-cells = <2>; - #size-cells = <2>; - fsl,srio-rmu-handle = <&rmu>; - ranges; - - port1 { - #address-cells = <2>; - #size-cells = <2>; - cell-index = <1>; - ranges = <0 0 0x80000000 0 0x20000000>; - }; - }; -*/ - -}; - -/include/ "mpc8641si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts deleted file mode 100644 index 3f5f7a99b9ea..000000000000 --- a/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts +++ /dev/null @@ -1,337 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * MPC8641 HPCN Device Tree Source - * - * Copyright 2008-2009 Freescale Semiconductor Inc. - */ - -/include/ "mpc8641si-pre.dtsi" - -/ { - model = "MPC8641HPCN"; - compatible = "fsl,mpc8641hpcn"; - #address-cells = <2>; - #size-cells = <2>; - - memory { - device_type = "memory"; - reg = <0x0 0x00000000 0x0 0x40000000>; // 1G at 0x0 - }; - - lbc: localbus@fffe05000 { - reg = <0x0f 0xffe05000 0x0 0x1000>; - - ranges = <0 0 0xf 0xef800000 0x00800000 - 2 0 0xf 0xffdf8000 0x00008000 - 3 0 0xf 0xffdf0000 0x00008000>; - - flash@0,0 { - compatible = "cfi-flash"; - reg = <0 0 0x00800000>; - bank-width = <2>; - device-width = <2>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "kernel"; - reg = <0x00000000 0x00300000>; - }; - partition@300000 { - label = "firmware b"; - reg = <0x00300000 0x00100000>; - read-only; - }; - partition@400000 { - label = "fs"; - reg = <0x00400000 0x00300000>; - }; - partition@700000 { - label = "firmware a"; - reg = <0x00700000 0x00100000>; - read-only; - }; - }; - }; - - soc: soc8641@fffe00000 { - ranges = <0x00000000 0x0f 0xffe00000 0x00100000>; - - enet0: ethernet@24000 { - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; - }; - - mdio@24520 { - phy0: ethernet-phy@0 { - interrupts = <10 1 0 0>; - reg = <0>; - }; - phy1: ethernet-phy@1 { - interrupts = <10 1 0 0>; - reg = <1>; - }; - phy2: ethernet-phy@2 { - interrupts = <10 1 0 0>; - reg = <2>; - }; - phy3: ethernet-phy@3 { - interrupts = <10 1 0 0>; - reg = <3>; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet1: ethernet@25000 { - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - }; - - mdio@25520 { - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet2: ethernet@26000 { - tbi-handle = <&tbi2>; - phy-handle = <&phy2>; - phy-connection-type = "rgmii-id"; - }; - - mdio@26520 { - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet3: ethernet@27000 { - tbi-handle = <&tbi3>; - phy-handle = <&phy3>; - phy-connection-type = "rgmii-id"; - }; - - mdio@27520 { - tbi3: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - pci0: pcie@fffe08000 { - reg = <0x0f 0xffe08000 0x0 0x1000>; - ranges = <0x02000000 0x0 0xe0000000 0x0c 0x00000000 0x0 0x20000000 - 0x01000000 0x0 0x00000000 0x0f 0xffc00000 0x0 0x00010000>; - interrupt-map-mask = <0xff00 0 0 7>; - interrupt-map = < - /* IDSEL 0x11 func 0 - PCI slot 1 */ - 0x8800 0 0 1 &mpic 2 1 0 0 - 0x8800 0 0 2 &mpic 3 1 0 0 - 0x8800 0 0 3 &mpic 4 1 0 0 - 0x8800 0 0 4 &mpic 1 1 0 0 - - /* IDSEL 0x11 func 1 - PCI slot 1 */ - 0x8900 0 0 1 &mpic 2 1 0 0 - 0x8900 0 0 2 &mpic 3 1 0 0 - 0x8900 0 0 3 &mpic 4 1 0 0 - 0x8900 0 0 4 &mpic 1 1 0 0 - - /* IDSEL 0x11 func 2 - PCI slot 1 */ - 0x8a00 0 0 1 &mpic 2 1 0 0 - 0x8a00 0 0 2 &mpic 3 1 0 0 - 0x8a00 0 0 3 &mpic 4 1 0 0 - 0x8a00 0 0 4 &mpic 1 1 0 0 - - /* IDSEL 0x11 func 3 - PCI slot 1 */ - 0x8b00 0 0 1 &mpic 2 1 0 0 - 0x8b00 0 0 2 &mpic 3 1 0 0 - 0x8b00 0 0 3 &mpic 4 1 0 0 - 0x8b00 0 0 4 &mpic 1 1 0 0 - - /* IDSEL 0x11 func 4 - PCI slot 1 */ - 0x8c00 0 0 1 &mpic 2 1 0 0 - 0x8c00 0 0 2 &mpic 3 1 0 0 - 0x8c00 0 0 3 &mpic 4 1 0 0 - 0x8c00 0 0 4 &mpic 1 1 0 0 - - /* IDSEL 0x11 func 5 - PCI slot 1 */ - 0x8d00 0 0 1 &mpic 2 1 0 0 - 0x8d00 0 0 2 &mpic 3 1 0 0 - 0x8d00 0 0 3 &mpic 4 1 0 0 - 0x8d00 0 0 4 &mpic 1 1 0 0 - - /* IDSEL 0x11 func 6 - PCI slot 1 */ - 0x8e00 0 0 1 &mpic 2 1 0 0 - 0x8e00 0 0 2 &mpic 3 1 0 0 - 0x8e00 0 0 3 &mpic 4 1 0 0 - 0x8e00 0 0 4 &mpic 1 1 0 0 - - /* IDSEL 0x11 func 7 - PCI slot 1 */ - 0x8f00 0 0 1 &mpic 2 1 0 0 - 0x8f00 0 0 2 &mpic 3 1 0 0 - 0x8f00 0 0 3 &mpic 4 1 0 0 - 0x8f00 0 0 4 &mpic 1 1 0 0 - - /* IDSEL 0x12 func 0 - PCI slot 2 */ - 0x9000 0 0 1 &mpic 3 1 0 0 - 0x9000 0 0 2 &mpic 4 1 0 0 - 0x9000 0 0 3 &mpic 1 1 0 0 - 0x9000 0 0 4 &mpic 2 1 0 0 - - /* IDSEL 0x12 func 1 - PCI slot 2 */ - 0x9100 0 0 1 &mpic 3 1 0 0 - 0x9100 0 0 2 &mpic 4 1 0 0 - 0x9100 0 0 3 &mpic 1 1 0 0 - 0x9100 0 0 4 &mpic 2 1 0 0 - - /* IDSEL 0x12 func 2 - PCI slot 2 */ - 0x9200 0 0 1 &mpic 3 1 0 0 - 0x9200 0 0 2 &mpic 4 1 0 0 - 0x9200 0 0 3 &mpic 1 1 0 0 - 0x9200 0 0 4 &mpic 2 1 0 0 - - /* IDSEL 0x12 func 3 - PCI slot 2 */ - 0x9300 0 0 1 &mpic 3 1 0 0 - 0x9300 0 0 2 &mpic 4 1 0 0 - 0x9300 0 0 3 &mpic 1 1 0 0 - 0x9300 0 0 4 &mpic 2 1 0 0 - - /* IDSEL 0x12 func 4 - PCI slot 2 */ - 0x9400 0 0 1 &mpic 3 1 0 0 - 0x9400 0 0 2 &mpic 4 1 0 0 - 0x9400 0 0 3 &mpic 1 1 0 0 - 0x9400 0 0 4 &mpic 2 1 0 0 - - /* IDSEL 0x12 func 5 - PCI slot 2 */ - 0x9500 0 0 1 &mpic 3 1 0 0 - 0x9500 0 0 2 &mpic 4 1 0 0 - 0x9500 0 0 3 &mpic 1 1 0 0 - 0x9500 0 0 4 &mpic 2 1 0 0 - - /* IDSEL 0x12 func 6 - PCI slot 2 */ - 0x9600 0 0 1 &mpic 3 1 0 0 - 0x9600 0 0 2 &mpic 4 1 0 0 - 0x9600 0 0 3 &mpic 1 1 0 0 - 0x9600 0 0 4 &mpic 2 1 0 0 - - /* IDSEL 0x12 func 7 - PCI slot 2 */ - 0x9700 0 0 1 &mpic 3 1 0 0 - 0x9700 0 0 2 &mpic 4 1 0 0 - 0x9700 0 0 3 &mpic 1 1 0 0 - 0x9700 0 0 4 &mpic 2 1 0 0 - - // IDSEL 0x1c USB - 0xe000 0 0 1 &i8259 12 2 - 0xe100 0 0 2 &i8259 9 2 - 0xe200 0 0 3 &i8259 10 2 - 0xe300 0 0 4 &i8259 11 2 - - // IDSEL 0x1d Audio - 0xe800 0 0 1 &i8259 6 2 - - // IDSEL 0x1e Legacy - 0xf000 0 0 1 &i8259 7 2 - 0xf100 0 0 1 &i8259 7 2 - - // IDSEL 0x1f IDE/SATA - 0xf800 0 0 1 &i8259 14 2 - 0xf900 0 0 1 &i8259 5 2 - >; - - pcie@0 { - ranges = <0x02000000 0x0 0xe0000000 - 0x02000000 0x0 0xe0000000 - 0x0 0x20000000 - - 0x01000000 0x0 0x00000000 - 0x01000000 0x0 0x00000000 - 0x0 0x00010000>; - uli1575@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <0x02000000 0x0 0xe0000000 - 0x02000000 0x0 0xe0000000 - 0x0 0x20000000 - 0x01000000 0x0 0x00000000 - 0x01000000 0x0 0x00000000 - 0x0 0x00010000>; - isa@1e { - device_type = "isa"; - #size-cells = <1>; - #address-cells = <2>; - reg = <0xf000 0 0 0 0>; - ranges = <1 0 0x01000000 0 0 - 0x00001000>; - interrupt-parent = <&i8259>; - - i8259: interrupt-controller@20 { - reg = <1 0x20 2 - 1 0xa0 2 - 1 0x4d0 2>; - interrupt-controller; - device_type = "interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <2>; - compatible = "chrp,iic"; - interrupts = <9 2 0 0>; - }; - - i8042@60 { - #size-cells = <0>; - #address-cells = <1>; - reg = <1 0x60 1 1 0x64 1>; - interrupts = <1 3 12 3>; - interrupt-parent = <&i8259>; - - keyboard@0 { - reg = <0>; - compatible = "pnpPNP,303"; - }; - - mouse@1 { - reg = <1>; - compatible = "pnpPNP,f03"; - }; - }; - - rtc@70 { - compatible = - "pnpPNP,b00"; - reg = <1 0x70 2>; - }; - - gpio@400 { - reg = <1 0x400 0x80>; - }; - }; - }; - }; - - }; - - pci1: pcie@fffe09000 { - reg = <0x0f 0xffe09000 0x0 0x1000>; - ranges = <0x02000000 0x0 0xe0000000 0x0c 0x20000000 0x0 0x20000000 - 0x01000000 0x0 0x00000000 0x0f 0xffc10000 0x0 0x00010000>; - - pcie@0 { - ranges = <0x02000000 0x0 0xe0000000 - 0x02000000 0x0 0xe0000000 - 0x0 0x20000000 - - 0x01000000 0x0 0x00000000 - 0x01000000 0x0 0x00000000 - 0x0 0x00010000>; - }; - }; -}; - -/include/ "mpc8641si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts index 3a94acbb3c03..ce3346d77858 100644 --- a/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts +++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts @@ -29,3 +29,19 @@ }; /include/ "p1010si-post.dtsi" + +&pci0 { + pcie@0 { + interrupt-map = < + /* IDSEL 0x0 */ + /* + *irq[4:5] are active-high + *irq[6:7] are active-low + */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts index 4cf255fedc96..83590354f9a0 100644 --- a/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts +++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts @@ -56,3 +56,19 @@ }; /include/ "p1010si-post.dtsi" + +&pci0 { + pcie@0 { + interrupt-map = < + /* IDSEL 0x0 */ + /* + *irq[4:5] are active-high + *irq[6:7] are active-low + */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi index 2ca9cee2ddeb..ef49a7d6c69d 100644 --- a/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi @@ -215,19 +215,3 @@ phy-connection-type = "sgmii"; }; }; - -&pci0 { - pcie@0 { - interrupt-map = < - /* IDSEL 0x0 */ - /* - *irq[4:5] are active-high - *irq[6:7] are active-low - */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0 - 0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0 - 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 - 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 - >; - }; -}; diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb_32b.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb_32b.dtsi index fdc19aab2f70..583a6cd05079 100644 --- a/arch/powerpc/boot/dts/fsl/p1010rdb_32b.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1010rdb_32b.dtsi @@ -36,7 +36,7 @@ memory { device_type = "memory"; }; -board_ifc: ifc: ifc@ffe1e000 { +board_ifc: ifc: memory-controller@ffe1e000 { /* NOR, NAND Flashes and CPLD on board */ ranges = <0x0 0x0 0x0 0xee000000 0x02000000 0x1 0x0 0x0 0xff800000 0x00010000 diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb_36b.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb_36b.dtsi index de2fceed4f79..4d41efe0038f 100644 --- a/arch/powerpc/boot/dts/fsl/p1010rdb_36b.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1010rdb_36b.dtsi @@ -36,7 +36,7 @@ memory { device_type = "memory"; }; -board_ifc: ifc: ifc@fffe1e000 { +board_ifc: ifc: memory-controller@fffe1e000 { /* NOR, NAND Flashes and CPLD on board */ ranges = <0x0 0x0 0xf 0xee000000 0x02000000 0x1 0x0 0xf 0xff800000 0x00010000 diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi index ccda0a91abf0..2d2550729dcc 100644 --- a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi @@ -35,7 +35,7 @@ &ifc { #address-cells = <2>; #size-cells = <1>; - compatible = "fsl,ifc", "simple-bus"; + compatible = "fsl,ifc"; interrupts = <16 2 0 0 19 2 0 0>; }; @@ -183,9 +183,23 @@ /include/ "pq3-etsec2-1.dtsi" /include/ "pq3-etsec2-2.dtsi" + enet0: ethernet@b0000 { + fsl,pmc-handle = <&etsec1_clk>; + }; + + enet1: ethernet@b1000 { + fsl,pmc-handle = <&etsec2_clk>; + }; + + enet2: ethernet@b2000 { + fsl,pmc-handle = <&etsec3_clk>; + }; + global-utilities@e0000 { compatible = "fsl,p1010-guts"; reg = <0xe0000 0x1000>; fsl,has-rstcr; }; + +/include/ "pq3-power.dtsi" }; diff --git a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi index 642dc3a83d0e..cc4c7461003b 100644 --- a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi @@ -163,14 +163,17 @@ /include/ "pq3-etsec2-0.dtsi" enet0: enet0_grp2: ethernet@b0000 { + fsl,pmc-handle = <&etsec1_clk>; }; /include/ "pq3-etsec2-1.dtsi" enet1: enet1_grp2: ethernet@b1000 { + fsl,pmc-handle = <&etsec2_clk>; }; /include/ "pq3-etsec2-2.dtsi" enet2: enet2_grp2: ethernet@b2000 { + fsl,pmc-handle = <&etsec3_clk>; }; global-utilities@e0000 { @@ -178,6 +181,8 @@ reg = <0xe0000 0x1000>; fsl,has-rstcr; }; + +/include/ "pq3-power.dtsi" }; /include/ "pq3-etsec2-grp2-0.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi index 407cb5fd0f5b..378195db9fca 100644 --- a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi @@ -159,14 +159,17 @@ /include/ "pq3-etsec2-0.dtsi" enet0: enet0_grp2: ethernet@b0000 { + fsl,pmc-handle = <&etsec1_clk>; }; /include/ "pq3-etsec2-1.dtsi" enet1: enet1_grp2: ethernet@b1000 { + fsl,pmc-handle = <&etsec2_clk>; }; /include/ "pq3-etsec2-2.dtsi" enet2: enet2_grp2: ethernet@b2000 { + fsl,pmc-handle = <&etsec3_clk>; }; global-utilities@e0000 { @@ -174,6 +177,8 @@ reg = <0xe0000 0x1000>; fsl,has-rstcr; }; + +/include/ "pq3-power.dtsi" }; &qe { diff --git a/arch/powerpc/boot/dts/fsl/p1022rdk.dts b/arch/powerpc/boot/dts/fsl/p1022rdk.dts index 29e8af1e3711..4261c2f7e4b3 100644 --- a/arch/powerpc/boot/dts/fsl/p1022rdk.dts +++ b/arch/powerpc/boot/dts/fsl/p1022rdk.dts @@ -60,23 +60,23 @@ compatible = "st,m41t62"; reg = <0x68>; }; - adt7461@4c{ + adt7461@4c { compatible = "adi,adt7461"; reg = <0x4c>; }; - zl6100@21{ + zl6100@21 { compatible = "isil,zl6100"; reg = <0x21>; }; - zl6100@24{ + zl6100@24 { compatible = "isil,zl6100"; reg = <0x24>; }; - zl6100@26{ + zl6100@26 { compatible = "isil,zl6100"; reg = <0x26>; }; - zl6100@29{ + zl6100@29 { compatible = "isil,zl6100"; reg = <0x29>; }; diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi index 5f51b7bfc064..6ac21e81344a 100644 --- a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi @@ -225,11 +225,13 @@ /include/ "pq3-etsec2-0.dtsi" enet0: enet0_grp2: ethernet@b0000 { fsl,wake-on-filer; + fsl,pmc-handle = <&etsec1_clk>; }; /include/ "pq3-etsec2-1.dtsi" enet1: enet1_grp2: ethernet@b1000 { fsl,wake-on-filer; + fsl,pmc-handle = <&etsec2_clk>; }; global-utilities@e0000 { @@ -238,9 +240,10 @@ fsl,has-rstcr; }; - power@e0070{ - compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc"; - reg = <0xe0070 0x20>; +/include/ "pq3-power.dtsi" + power@e0070 { + compatible = "fsl,p1022-pmc", "fsl,mpc8536-pmc", + "fsl,mpc8548-pmc"; }; }; diff --git a/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi index 81b9ab2119be..d410082d21c0 100644 --- a/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi @@ -178,6 +178,10 @@ compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; }; /include/ "pq3-etsec1-0.dtsi" + enet0: ethernet@24000 { + fsl,pmc-handle = <&etsec1_clk>; + + }; /include/ "pq3-etsec1-timer-0.dtsi" ptp_clock@24e00 { @@ -186,7 +190,15 @@ /include/ "pq3-etsec1-1.dtsi" + enet1: ethernet@25000 { + fsl,pmc-handle = <&etsec2_clk>; + }; + /include/ "pq3-etsec1-2.dtsi" + enet2: ethernet@26000 { + fsl,pmc-handle = <&etsec3_clk>; + }; + /include/ "pq3-esdhc-0.dtsi" sdhc@2e000 { compatible = "fsl,p2020-esdhc", "fsl,esdhc"; @@ -202,8 +214,5 @@ fsl,has-rstcr; }; - pmc: power@e0070 { - compatible = "fsl,mpc8548-pmc"; - reg = <0xe0070 0x20>; - }; +/include/ "pq3-power.dtsi" }; diff --git a/arch/powerpc/boot/dts/fsl/p3041ds.dts b/arch/powerpc/boot/dts/fsl/p3041ds.dts index 6f5f7283c533..ca0e0272ac62 100644 --- a/arch/powerpc/boot/dts/fsl/p3041ds.dts +++ b/arch/powerpc/boot/dts/fsl/p3041ds.dts @@ -41,7 +41,7 @@ #size-cells = <2>; interrupt-parent = <&mpic>; - aliases{ + aliases { phy_rgmii_0 = &phy_rgmii_0; phy_rgmii_1 = &phy_rgmii_1; phy_sgmii_1c = &phy_sgmii_1c; @@ -165,7 +165,7 @@ }; }; - fman@400000{ + fman@400000 { ethernet@e0000 { phy-handle = <&phy_sgmii_1c>; phy-connection-type = "sgmii"; diff --git a/arch/powerpc/boot/dts/fsl/p5040ds.dts b/arch/powerpc/boot/dts/fsl/p5040ds.dts index 30850b3228e0..5cfc689ee474 100644 --- a/arch/powerpc/boot/dts/fsl/p5040ds.dts +++ b/arch/powerpc/boot/dts/fsl/p5040ds.dts @@ -41,7 +41,7 @@ #size-cells = <2>; interrupt-parent = <&mpic>; - aliases{ + aliases { phy_sgmii_slot2_1c = &phy_sgmii_slot2_1c; phy_sgmii_slot2_1d = &phy_sgmii_slot2_1d; phy_sgmii_slot2_1e = &phy_sgmii_slot2_1e; diff --git a/arch/powerpc/boot/dts/fsl/pq3-power.dtsi b/arch/powerpc/boot/dts/fsl/pq3-power.dtsi new file mode 100644 index 000000000000..6af12401004d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-power.dtsi @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: (GPL-2.0+) +/* + * Copyright 2024 NXP + */ + +power@e0070 { + compatible = "fsl,mpc8548-pmc"; + reg = <0xe0070 0x20>; + + etsec1_clk: soc-clk@24 { + fsl,pmcdr-mask = <0x00000080>; + }; + etsec2_clk: soc-clk@25 { + fsl,pmcdr-mask = <0x00000040>; + }; + etsec3_clk: soc-clk@26 { + fsl,pmcdr-mask = <0x00000020>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi index baa0c503e741..7e70977f282a 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi @@ -55,7 +55,8 @@ fman@400000 { reg = <0xe0000 0x1000>; fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>; ptp-timer = <&ptp_timer0>; - pcsphy-handle = <&pcsphy0>; + pcsphy-handle = <&pcsphy0>, <&pcsphy0>; + pcs-handle-names = "sgmii", "qsgmii"; }; mdio@e1000 { diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi index 93095600e808..5f89f7c1761f 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi @@ -52,7 +52,15 @@ fman@400000 { compatible = "fsl,fman-memac"; reg = <0xf0000 0x1000>; fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>; - pcsphy-handle = <&pcsphy6>; + pcsphy-handle = <&pcsphy6>, <&qsgmiib_pcs2>, <&pcsphy6>; + pcs-handle-names = "sgmii", "qsgmii", "xfi"; + }; + + mdio@e9000 { + qsgmiib_pcs2: ethernet-pcs@2 { + compatible = "fsl,lynx-pcs"; + reg = <2>; + }; }; mdio@f1000 { diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi index ff4bd38f0645..71eb75e82c2e 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi @@ -55,7 +55,15 @@ fman@400000 { reg = <0xe2000 0x1000>; fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>; ptp-timer = <&ptp_timer0>; - pcsphy-handle = <&pcsphy1>; + pcsphy-handle = <&pcsphy1>, <&qsgmiia_pcs1>; + pcs-handle-names = "sgmii", "qsgmii"; + }; + + mdio@e1000 { + qsgmiia_pcs1: ethernet-pcs@1 { + compatible = "fsl,lynx-pcs"; + reg = <1>; + }; }; mdio@e3000 { diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi index 1fa38ed6f59e..fb7032ddb7fc 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi @@ -52,7 +52,15 @@ fman@400000 { compatible = "fsl,fman-memac"; reg = <0xf2000 0x1000>; fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>; - pcsphy-handle = <&pcsphy7>; + pcsphy-handle = <&pcsphy7>, <&qsgmiib_pcs3>, <&pcsphy7>; + pcs-handle-names = "sgmii", "qsgmii", "xfi"; + }; + + mdio@e9000 { + qsgmiib_pcs3: ethernet-pcs@3 { + compatible = "fsl,lynx-pcs"; + reg = <3>; + }; }; mdio@f3000 { diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi new file mode 100644 index 000000000000..6b3609574b0f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later +/* + * QorIQ FMan v3 10g port #2 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2022 Sean Anderson <sean.anderson@seco.com> + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + */ + +fman@400000 { + fman0_rx_0x08: port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x88000 0x1000>; + fsl,fman-10g-port; + }; + + fman0_tx_0x28: port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa8000 0x1000>; + fsl,fman-10g-port; + }; + + ethernet@e0000 { + cell-index = <0>; + compatible = "fsl,fman-memac"; + reg = <0xe0000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy0>, <&pcsphy0>; + pcs-handle-names = "sgmii", "xfi"; + }; + + mdio@e1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe1000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */ + + pcsphy0: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi new file mode 100644 index 000000000000..28ed1a85a436 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later +/* + * QorIQ FMan v3 10g port #3 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2022 Sean Anderson <sean.anderson@seco.com> + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + */ + +fman@400000 { + fman0_rx_0x09: port@89000 { + cell-index = <0x9>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x89000 0x1000>; + fsl,fman-10g-port; + }; + + fman0_tx_0x29: port@a9000 { + cell-index = <0x29>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa9000 0x1000>; + fsl,fman-10g-port; + }; + + ethernet@e2000 { + cell-index = <1>; + compatible = "fsl,fman-memac"; + reg = <0xe2000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy1>, <&pcsphy1>; + pcs-handle-names = "sgmii", "xfi"; + }; + + mdio@e3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe3000 0x1000>; + fsl,erratum-a011043; /* must ignore read errors */ + + pcsphy1: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi index a8cc9780c0c4..1089d6861bfb 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi @@ -51,7 +51,8 @@ fman@400000 { reg = <0xe0000 0x1000>; fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>; ptp-timer = <&ptp_timer0>; - pcsphy-handle = <&pcsphy0>; + pcsphy-handle = <&pcsphy0>, <&pcsphy0>; + pcs-handle-names = "sgmii", "qsgmii"; }; mdio@e1000 { diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi index 8b8bd70c9382..a95bbb4fc827 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi @@ -51,7 +51,15 @@ fman@400000 { reg = <0xe2000 0x1000>; fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>; ptp-timer = <&ptp_timer0>; - pcsphy-handle = <&pcsphy1>; + pcsphy-handle = <&pcsphy1>, <&qsgmiia_pcs1>; + pcs-handle-names = "sgmii", "qsgmii"; + }; + + mdio@e1000 { + qsgmiia_pcs1: ethernet-pcs@1 { + compatible = "fsl,lynx-pcs"; + reg = <1>; + }; }; mdio@e3000 { diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi index 619c880b54d8..7d5af0147a25 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi @@ -51,7 +51,15 @@ fman@400000 { reg = <0xe4000 0x1000>; fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>; ptp-timer = <&ptp_timer0>; - pcsphy-handle = <&pcsphy2>; + pcsphy-handle = <&pcsphy2>, <&qsgmiia_pcs2>; + pcs-handle-names = "sgmii", "qsgmii"; + }; + + mdio@e1000 { + qsgmiia_pcs2: ethernet-pcs@2 { + compatible = "fsl,lynx-pcs"; + reg = <2>; + }; }; mdio@e5000 { diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi index d7ebb73a400d..61e5466ec854 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi @@ -51,7 +51,15 @@ fman@400000 { reg = <0xe6000 0x1000>; fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>; ptp-timer = <&ptp_timer0>; - pcsphy-handle = <&pcsphy3>; + pcsphy-handle = <&pcsphy3>, <&qsgmiia_pcs3>; + pcs-handle-names = "sgmii", "qsgmii"; + }; + + mdio@e1000 { + qsgmiia_pcs3: ethernet-pcs@3 { + compatible = "fsl,lynx-pcs"; + reg = <3>; + }; }; mdio@e7000 { diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi index b151d696a069..3ba0cdafc069 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi @@ -51,7 +51,8 @@ fman@400000 { reg = <0xe8000 0x1000>; fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>; ptp-timer = <&ptp_timer0>; - pcsphy-handle = <&pcsphy4>; + pcsphy-handle = <&pcsphy4>, <&pcsphy4>; + pcs-handle-names = "sgmii", "qsgmii"; }; mdio@e9000 { diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi index adc0ae0013a3..51748de0a289 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi @@ -51,7 +51,15 @@ fman@400000 { reg = <0xea000 0x1000>; fsl,fman-ports = <&fman0_rx_0x0d &fman0_tx_0x2d>; ptp-timer = <&ptp_timer0>; - pcsphy-handle = <&pcsphy5>; + pcsphy-handle = <&pcsphy5>, <&qsgmiib_pcs1>; + pcs-handle-names = "sgmii", "qsgmii"; + }; + + mdio@e9000 { + qsgmiib_pcs1: ethernet-pcs@1 { + compatible = "fsl,lynx-pcs"; + reg = <1>; + }; }; mdio@eb000 { diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi index 435047e0e250..ee4f5170f632 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi @@ -52,7 +52,15 @@ fman@500000 { compatible = "fsl,fman-memac"; reg = <0xf0000 0x1000>; fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>; - pcsphy-handle = <&pcsphy14>; + pcsphy-handle = <&pcsphy14>, <&qsgmiid_pcs2>, <&pcsphy14>; + pcs-handle-names = "sgmii", "qsgmii", "xfi"; + }; + + mdio@e9000 { + qsgmiid_pcs2: ethernet-pcs@2 { + compatible = "fsl,lynx-pcs"; + reg = <2>; + }; }; mdio@f1000 { diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi index c098657cca0a..83d2e0ce8f7b 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi @@ -52,7 +52,15 @@ fman@500000 { compatible = "fsl,fman-memac"; reg = <0xf2000 0x1000>; fsl,fman-ports = <&fman1_rx_0x11 &fman1_tx_0x31>; - pcsphy-handle = <&pcsphy15>; + pcsphy-handle = <&pcsphy15>, <&qsgmiid_pcs3>, <&pcsphy15>; + pcs-handle-names = "sgmii", "qsgmii", "xfi"; + }; + + mdio@e9000 { + qsgmiid_pcs3: ethernet-pcs@3 { + compatible = "fsl,lynx-pcs"; + reg = <3>; + }; }; mdio@f3000 { diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi index 9d06824815f3..3132fc73f133 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi @@ -51,7 +51,8 @@ fman@500000 { reg = <0xe0000 0x1000>; fsl,fman-ports = <&fman1_rx_0x08 &fman1_tx_0x28>; ptp-timer = <&ptp_timer1>; - pcsphy-handle = <&pcsphy8>; + pcsphy-handle = <&pcsphy8>, <&pcsphy8>; + pcs-handle-names = "sgmii", "qsgmii"; }; mdio@e1000 { diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi index 70e947730c4b..75e904d96602 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi @@ -51,7 +51,15 @@ fman@500000 { reg = <0xe2000 0x1000>; fsl,fman-ports = <&fman1_rx_0x09 &fman1_tx_0x29>; ptp-timer = <&ptp_timer1>; - pcsphy-handle = <&pcsphy9>; + pcsphy-handle = <&pcsphy9>, <&qsgmiic_pcs1>; + pcs-handle-names = "sgmii", "qsgmii"; + }; + + mdio@e1000 { + qsgmiic_pcs1: ethernet-pcs@1 { + compatible = "fsl,lynx-pcs"; + reg = <1>; + }; }; mdio@e3000 { diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi index ad96e6529595..69f2cc7b8f19 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi @@ -51,7 +51,15 @@ fman@500000 { reg = <0xe4000 0x1000>; fsl,fman-ports = <&fman1_rx_0x0a &fman1_tx_0x2a>; ptp-timer = <&ptp_timer1>; - pcsphy-handle = <&pcsphy10>; + pcsphy-handle = <&pcsphy10>, <&qsgmiic_pcs2>; + pcs-handle-names = "sgmii", "qsgmii"; + }; + + mdio@e1000 { + qsgmiic_pcs2: ethernet-pcs@2 { + compatible = "fsl,lynx-pcs"; + reg = <2>; + }; }; mdio@e5000 { diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi index 034bc4b71f7a..b3aaf01d7da0 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi @@ -51,7 +51,15 @@ fman@500000 { reg = <0xe6000 0x1000>; fsl,fman-ports = <&fman1_rx_0x0b &fman1_tx_0x2b>; ptp-timer = <&ptp_timer1>; - pcsphy-handle = <&pcsphy11>; + pcsphy-handle = <&pcsphy11>, <&qsgmiic_pcs3>; + pcs-handle-names = "sgmii", "qsgmii"; + }; + + mdio@e1000 { + qsgmiic_pcs3: ethernet-pcs@3 { + compatible = "fsl,lynx-pcs"; + reg = <3>; + }; }; mdio@e7000 { diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi index 93ca23d82b39..18e020432807 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi @@ -51,7 +51,8 @@ fman@500000 { reg = <0xe8000 0x1000>; fsl,fman-ports = <&fman1_rx_0x0c &fman1_tx_0x2c>; ptp-timer = <&ptp_timer1>; - pcsphy-handle = <&pcsphy12>; + pcsphy-handle = <&pcsphy12>, <&pcsphy12>; + pcs-handle-names = "sgmii", "qsgmii"; }; mdio@e9000 { diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi index 23b3117a2fd2..55f329d13f19 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi @@ -51,7 +51,15 @@ fman@500000 { reg = <0xea000 0x1000>; fsl,fman-ports = <&fman1_rx_0x0d &fman1_tx_0x2d>; ptp-timer = <&ptp_timer1>; - pcsphy-handle = <&pcsphy13>; + pcsphy-handle = <&pcsphy13>, <&qsgmiid_pcs1>; + pcs-handle-names = "sgmii", "qsgmii"; + }; + + mdio@e9000 { + qsgmiid_pcs1: ethernet-pcs@1 { + compatible = "fsl,lynx-pcs"; + reg = <1>; + }; }; mdio@eb000 { diff --git a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi index d552044c5afc..8ef0c020206b 100644 --- a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi @@ -52,7 +52,7 @@ &ifc { #address-cells = <2>; #size-cells = <1>; - compatible = "fsl,ifc", "simple-bus"; + compatible = "fsl,ifc"; interrupts = <25 2 0 0>; }; @@ -367,45 +367,46 @@ reg = <0xf0000 0x1000>; interrupts = <18 2 0 0>; fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>; - fsl,tmu-calibration = <0x00000000 0x0000000f - 0x00000001 0x00000017 - 0x00000002 0x0000001e - 0x00000003 0x00000026 - 0x00000004 0x0000002e - 0x00000005 0x00000035 - 0x00000006 0x0000003d - 0x00000007 0x00000044 - 0x00000008 0x0000004c - 0x00000009 0x00000053 - 0x0000000a 0x0000005b - 0x0000000b 0x00000064 - - 0x00010000 0x00000011 - 0x00010001 0x0000001c - 0x00010002 0x00000024 - 0x00010003 0x0000002b - 0x00010004 0x00000034 - 0x00010005 0x00000039 - 0x00010006 0x00000042 - 0x00010007 0x0000004c - 0x00010008 0x00000051 - 0x00010009 0x0000005a - 0x0001000a 0x00000063 - - 0x00020000 0x00000013 - 0x00020001 0x00000019 - 0x00020002 0x00000024 - 0x00020003 0x0000002c - 0x00020004 0x00000035 - 0x00020005 0x0000003d - 0x00020006 0x00000046 - 0x00020007 0x00000050 - 0x00020008 0x00000059 - - 0x00030000 0x00000002 - 0x00030001 0x0000000d - 0x00030002 0x00000019 - 0x00030003 0x00000024>; + fsl,tmu-calibration = + <0x00000000 0x0000000f>, + <0x00000001 0x00000017>, + <0x00000002 0x0000001e>, + <0x00000003 0x00000026>, + <0x00000004 0x0000002e>, + <0x00000005 0x00000035>, + <0x00000006 0x0000003d>, + <0x00000007 0x00000044>, + <0x00000008 0x0000004c>, + <0x00000009 0x00000053>, + <0x0000000a 0x0000005b>, + <0x0000000b 0x00000064>, + + <0x00010000 0x00000011>, + <0x00010001 0x0000001c>, + <0x00010002 0x00000024>, + <0x00010003 0x0000002b>, + <0x00010004 0x00000034>, + <0x00010005 0x00000039>, + <0x00010006 0x00000042>, + <0x00010007 0x0000004c>, + <0x00010008 0x00000051>, + <0x00010009 0x0000005a>, + <0x0001000a 0x00000063>, + + <0x00020000 0x00000013>, + <0x00020001 0x00000019>, + <0x00020002 0x00000024>, + <0x00020003 0x0000002c>, + <0x00020004 0x00000035>, + <0x00020005 0x0000003d>, + <0x00020006 0x00000046>, + <0x00020007 0x00000050>, + <0x00020008 0x00000059>, + + <0x00030000 0x00000002>, + <0x00030001 0x0000000d>, + <0x00030002 0x00000019>, + <0x00030003 0x00000024>; #thermal-sensor-cells = <1>; }; diff --git a/arch/powerpc/boot/dts/fsl/t1024qds.dts b/arch/powerpc/boot/dts/fsl/t1024qds.dts index d6858b7cd93f..9ea7942f914e 100644 --- a/arch/powerpc/boot/dts/fsl/t1024qds.dts +++ b/arch/powerpc/boot/dts/fsl/t1024qds.dts @@ -151,7 +151,7 @@ }; i2c@118000 { - pca9547@77 { + i2c-mux@77 { compatible = "nxp,pca9547"; reg = <0x77>; #address-cells = <1>; diff --git a/arch/powerpc/boot/dts/fsl/t1024rdb.dts b/arch/powerpc/boot/dts/fsl/t1024rdb.dts index dbcd31cc35dc..7d003e07a9fb 100644 --- a/arch/powerpc/boot/dts/fsl/t1024rdb.dts +++ b/arch/powerpc/boot/dts/fsl/t1024rdb.dts @@ -91,7 +91,7 @@ board-control@2,0 { #address-cells = <1>; #size-cells = <1>; - compatible = "fsl,t1024-cpld"; + compatible = "fsl,t1024-cpld", "fsl,deepsleep-cpld"; reg = <3 0 0x300>; ranges = <0 3 0 0x300>; bank-width = <1>; @@ -165,7 +165,7 @@ }; i2c@118100 { - pca9546@77 { + i2c-mux@77 { compatible = "nxp,pca9546"; reg = <0x77>; #address-cells = <1>; diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts b/arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts index 73f8c998c64d..d4f5f159d6f2 100644 --- a/arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts +++ b/arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts @@ -10,7 +10,6 @@ / { model = "fsl,T1040RDB-REV-A"; - compatible = "fsl,T1040RDB-REV-A"; }; &seville_port0 { diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb.dts b/arch/powerpc/boot/dts/fsl/t1040rdb.dts index b6733e7e6580..4347924e9aa7 100644 --- a/arch/powerpc/boot/dts/fsl/t1040rdb.dts +++ b/arch/powerpc/boot/dts/fsl/t1040rdb.dts @@ -104,7 +104,7 @@ ifc: localbus@ffe124000 { cpld@3,0 { - compatible = "fsl,t1040rdb-cpld"; + compatible = "fsl,t104xrdb-cpld", "fsl,deepsleep-cpld"; }; }; }; @@ -180,6 +180,9 @@ }; &seville_port8 { - ethernet = <&enet0>; + status = "okay"; +}; + +&seville_port9 { status = "okay"; }; diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi index f58eb820eb5e..c9542b73bd7f 100644 --- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi @@ -52,7 +52,7 @@ &ifc { #address-cells = <2>; #size-cells = <1>; - compatible = "fsl,ifc", "simple-bus"; + compatible = "fsl,ifc"; interrupts = <25 2 0 0>; }; @@ -447,41 +447,42 @@ reg = <0xf0000 0x1000>; interrupts = <18 2 0 0>; fsl,tmu-range = <0xa0000 0x90026 0x8004a 0x1006a>; - fsl,tmu-calibration = <0x00000000 0x00000025 - 0x00000001 0x00000028 - 0x00000002 0x0000002d - 0x00000003 0x00000031 - 0x00000004 0x00000036 - 0x00000005 0x0000003a - 0x00000006 0x00000040 - 0x00000007 0x00000044 - 0x00000008 0x0000004a - 0x00000009 0x0000004f - 0x0000000a 0x00000054 - - 0x00010000 0x0000000d - 0x00010001 0x00000013 - 0x00010002 0x00000019 - 0x00010003 0x0000001f - 0x00010004 0x00000025 - 0x00010005 0x0000002d - 0x00010006 0x00000033 - 0x00010007 0x00000043 - 0x00010008 0x0000004b - 0x00010009 0x00000053 - - 0x00020000 0x00000010 - 0x00020001 0x00000017 - 0x00020002 0x0000001f - 0x00020003 0x00000029 - 0x00020004 0x00000031 - 0x00020005 0x0000003c - 0x00020006 0x00000042 - 0x00020007 0x0000004d - 0x00020008 0x00000056 - - 0x00030000 0x00000012 - 0x00030001 0x0000001d>; + fsl,tmu-calibration = + <0x00000000 0x00000025>, + <0x00000001 0x00000028>, + <0x00000002 0x0000002d>, + <0x00000003 0x00000031>, + <0x00000004 0x00000036>, + <0x00000005 0x0000003a>, + <0x00000006 0x00000040>, + <0x00000007 0x00000044>, + <0x00000008 0x0000004a>, + <0x00000009 0x0000004f>, + <0x0000000a 0x00000054>, + + <0x00010000 0x0000000d>, + <0x00010001 0x00000013>, + <0x00010002 0x00000019>, + <0x00010003 0x0000001f>, + <0x00010004 0x00000025>, + <0x00010005 0x0000002d>, + <0x00010006 0x00000033>, + <0x00010007 0x00000043>, + <0x00010008 0x0000004b>, + <0x00010009 0x00000053>, + + <0x00020000 0x00000010>, + <0x00020001 0x00000017>, + <0x00020002 0x0000001f>, + <0x00020003 0x00000029>, + <0x00020004 0x00000031>, + <0x00020005 0x0000003c>, + <0x00020006 0x00000042>, + <0x00020007 0x0000004d>, + <0x00020008 0x00000056>, + + <0x00030000 0x00000012>, + <0x00030001 0x0000001d>; #thermal-sensor-cells = <1>; }; @@ -686,6 +687,7 @@ seville_port8: port@8 { reg = <8>; phy-mode = "internal"; + ethernet = <&enet0>; status = "disabled"; fixed-link { @@ -697,6 +699,7 @@ seville_port9: port@9 { reg = <9>; phy-mode = "internal"; + ethernet = <&enet1>; status = "disabled"; fixed-link { diff --git a/arch/powerpc/boot/dts/fsl/t1042rdb.dts b/arch/powerpc/boot/dts/fsl/t1042rdb.dts index 3ebb712224cb..099764322b33 100644 --- a/arch/powerpc/boot/dts/fsl/t1042rdb.dts +++ b/arch/powerpc/boot/dts/fsl/t1042rdb.dts @@ -68,7 +68,7 @@ ifc: localbus@ffe124000 { cpld@3,0 { - compatible = "fsl,t1042rdb-cpld"; + compatible = "fsl,t104xrdb-cpld", "fsl,deepsleep-cpld"; }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts b/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts index 8ec3ff45e6fc..b10cab1a347b 100644 --- a/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts +++ b/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts @@ -41,7 +41,7 @@ ifc: localbus@ffe124000 { cpld@3,0 { - compatible = "fsl,t1042rdb_pi-cpld"; + compatible = "fsl,t104xrdb-cpld", "fsl,deepsleep-cpld"; }; }; diff --git a/arch/powerpc/boot/dts/fsl/t104xqds.dtsi b/arch/powerpc/boot/dts/fsl/t104xqds.dtsi index 615479732252..1c329f076f64 100644 --- a/arch/powerpc/boot/dts/fsl/t104xqds.dtsi +++ b/arch/powerpc/boot/dts/fsl/t104xqds.dtsi @@ -268,7 +268,7 @@ }; i2c@118000 { - pca9547@77 { + i2c-mux@77 { compatible = "nxp,pca9547"; reg = <0x77>; }; diff --git a/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi index bfe1ed5be337..fc7bec5dcb90 100644 --- a/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi +++ b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi @@ -128,7 +128,7 @@ }; i2c@118100 { - pca9546@77 { + i2c-mux@77 { compatible = "nxp,pca9546"; reg = <0x77>; #address-cells = <1>; diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi index ecbb447920bc..6bb95878d39d 100644 --- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi @@ -50,7 +50,7 @@ &ifc { #address-cells = <2>; #size-cells = <1>; - compatible = "fsl,ifc", "simple-bus"; + compatible = "fsl,ifc"; interrupts = <25 2 0 0>; }; @@ -609,8 +609,8 @@ /include/ "qoriq-bman1.dtsi" /include/ "qoriq-fman3-0.dtsi" -/include/ "qoriq-fman3-0-1g-0.dtsi" -/include/ "qoriq-fman3-0-1g-1.dtsi" +/include/ "qoriq-fman3-0-10g-2.dtsi" +/include/ "qoriq-fman3-0-10g-3.dtsi" /include/ "qoriq-fman3-0-1g-2.dtsi" /include/ "qoriq-fman3-0-1g-3.dtsi" /include/ "qoriq-fman3-0-1g-4.dtsi" @@ -659,3 +659,19 @@ interrupts = <16 2 1 9>; }; }; + +&fman0_rx_0x08 { + /delete-property/ fsl,fman-10g-port; +}; + +&fman0_tx_0x28 { + /delete-property/ fsl,fman-10g-port; +}; + +&fman0_rx_0x09 { + /delete-property/ fsl,fman-10g-port; +}; + +&fman0_tx_0x29 { + /delete-property/ fsl,fman-10g-port; +}; diff --git a/arch/powerpc/boot/dts/fsl/t208xqds.dtsi b/arch/powerpc/boot/dts/fsl/t208xqds.dtsi index db4139999b28..962c99941645 100644 --- a/arch/powerpc/boot/dts/fsl/t208xqds.dtsi +++ b/arch/powerpc/boot/dts/fsl/t208xqds.dtsi @@ -135,7 +135,7 @@ }; i2c@118000 { - pca9547@77 { + i2c-mux@77 { compatible = "nxp,pca9547"; reg = <0x77>; #address-cells = <1>; diff --git a/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi b/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi index ff87e67c70da..ecc3e8c7394c 100644 --- a/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi +++ b/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi @@ -138,7 +138,7 @@ }; i2c@118100 { - pca9546@77 { + i2c-mux@77 { compatible = "nxp,pca9546"; reg = <0x77>; }; diff --git a/arch/powerpc/boot/dts/fsl/t4240qds.dts b/arch/powerpc/boot/dts/fsl/t4240qds.dts index c0913ac5aaad..128b5798bb97 100644 --- a/arch/powerpc/boot/dts/fsl/t4240qds.dts +++ b/arch/powerpc/boot/dts/fsl/t4240qds.dts @@ -41,7 +41,7 @@ #size-cells = <2>; interrupt-parent = <&mpic>; - aliases{ + aliases { phy_rgmii1 = &phyrgmii1; phy_rgmii2 = &phyrgmii2; phy_sgmii3 = &phy3; diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi index fcac73486d48..65f3e17c0d41 100644 --- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi @@ -50,7 +50,7 @@ &ifc { #address-cells = <2>; #size-cells = <1>; - compatible = "fsl,ifc", "simple-bus"; + compatible = "fsl,ifc"; interrupts = <25 2 0 0>; }; diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts deleted file mode 100644 index f81ce8786d59..000000000000 --- a/arch/powerpc/boot/dts/haleakala.dts +++ /dev/null @@ -1,281 +0,0 @@ -/* - * Device Tree Source for AMCC Haleakala (405EXr) - * - * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "amcc,haleakala"; - compatible = "amcc,haleakala", "amcc,kilauea"; - dcr-parent = <&{/cpus/cpu@0}>; - - aliases { - ethernet0 = &EMAC0; - serial0 = &UART0; - serial1 = &UART1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,405EXr"; - reg = <0x00000000>; - clock-frequency = <0>; /* Filled in by U-Boot */ - timebase-frequency = <0>; /* Filled in by U-Boot */ - i-cache-line-size = <32>; - d-cache-line-size = <32>; - i-cache-size = <16384>; /* 16 kB */ - d-cache-size = <16384>; /* 16 kB */ - dcr-controller; - dcr-access-method = "native"; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */ - }; - - UIC0: interrupt-controller { - compatible = "ibm,uic-405exr", "ibm,uic"; - interrupt-controller; - cell-index = <0>; - dcr-reg = <0x0c0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - }; - - UIC1: interrupt-controller1 { - compatible = "ibm,uic-405exr","ibm,uic"; - interrupt-controller; - cell-index = <1>; - dcr-reg = <0x0d0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - UIC2: interrupt-controller2 { - compatible = "ibm,uic-405exr","ibm,uic"; - interrupt-controller; - cell-index = <2>; - dcr-reg = <0x0e0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - plb { - compatible = "ibm,plb-405exr", "ibm,plb4"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clock-frequency = <0>; /* Filled in by U-Boot */ - - SDRAM0: memory-controller { - compatible = "ibm,sdram-405exr", "ibm,sdram-4xx-ddr2"; - dcr-reg = <0x010 0x002>; - interrupt-parent = <&UIC2>; - interrupts = <0x5 0x4 /* ECC DED Error */ - 0x6 0x4>; /* ECC SEC Error */ - }; - - MAL0: mcmal { - compatible = "ibm,mcmal-405exr", "ibm,mcmal2"; - dcr-reg = <0x180 0x062>; - num-tx-chans = <2>; - num-rx-chans = <2>; - interrupt-parent = <&MAL0>; - interrupts = <0x0 0x1 0x2 0x3 0x4>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 - /*RXEOB*/ 0x1 &UIC0 0xb 0x4 - /*SERR*/ 0x2 &UIC1 0x0 0x4 - /*TXDE*/ 0x3 &UIC1 0x1 0x4 - /*RXDE*/ 0x4 &UIC1 0x2 0x4>; - interrupt-map-mask = <0xffffffff>; - }; - - POB0: opb { - compatible = "ibm,opb-405exr", "ibm,opb"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x80000000 0x80000000 0x10000000 - 0xef600000 0xef600000 0x00a00000 - 0xf0000000 0xf0000000 0x10000000>; - dcr-reg = <0x0a0 0x005>; - clock-frequency = <0>; /* Filled in by U-Boot */ - - EBC0: ebc { - compatible = "ibm,ebc-405exr", "ibm,ebc"; - dcr-reg = <0x012 0x002>; - #address-cells = <2>; - #size-cells = <1>; - clock-frequency = <0>; /* Filled in by U-Boot */ - /* ranges property is supplied by U-Boot */ - interrupts = <0x5 0x1>; - interrupt-parent = <&UIC1>; - - nor_flash@0,0 { - compatible = "amd,s29gl512n", "cfi-flash"; - bank-width = <2>; - reg = <0x00000000 0x00000000 0x04000000>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "kernel"; - reg = <0x00000000 0x00200000>; - }; - partition@200000 { - label = "root"; - reg = <0x00200000 0x00200000>; - }; - partition@400000 { - label = "user"; - reg = <0x00400000 0x03b60000>; - }; - partition@3f60000 { - label = "env"; - reg = <0x03f60000 0x00040000>; - }; - partition@3fa0000 { - label = "u-boot"; - reg = <0x03fa0000 0x00060000>; - }; - }; - }; - - UART0: serial@ef600200 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600200 0x00000008>; - virtual-reg = <0xef600200>; - clock-frequency = <0>; /* Filled in by U-Boot */ - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <0x1a 0x4>; - }; - - UART1: serial@ef600300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600300 0x00000008>; - virtual-reg = <0xef600300>; - clock-frequency = <0>; /* Filled in by U-Boot */ - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <0x1 0x4>; - }; - - IIC0: i2c@ef600400 { - compatible = "ibm,iic-405exr", "ibm,iic"; - reg = <0xef600400 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x2 0x4>; - }; - - IIC1: i2c@ef600500 { - compatible = "ibm,iic-405exr", "ibm,iic"; - reg = <0xef600500 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x7 0x4>; - }; - - - RGMII0: emac-rgmii@ef600b00 { - compatible = "ibm,rgmii-405exr", "ibm,rgmii"; - reg = <0xef600b00 0x00000104>; - has-mdio; - }; - - EMAC0: ethernet@ef600900 { - linux,network-index = <0x0>; - device_type = "network"; - compatible = "ibm,emac-405exr", "ibm,emac4sync"; - interrupt-parent = <&EMAC0>; - interrupts = <0x0 0x1>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4 - /*Wake*/ 0x1 &UIC1 0x1d 0x4>; - reg = <0xef600900 0x000000c4>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <0>; - mal-rx-channel = <0>; - cell-index = <0>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - rx-fifo-size-gige = <16384>; - tx-fifo-size-gige = <16384>; - phy-mode = "rgmii"; - phy-map = <0x00000000>; - rgmii-device = <&RGMII0>; - rgmii-channel = <0>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; - }; - - PCIE0: pcie@a0000000 { - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; - primary; - port = <0x0>; /* port number */ - reg = <0xa0000000 0x20000000 /* Config space access */ - 0xef000000 0x00001000>; /* Registers */ - dcr-reg = <0x040 0x020>; - sdr-base = <0x400>; - - /* Outbound ranges, one memory and one IO, - * later cannot be changed - */ - ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000 - 0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>; - - /* Inbound 2GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; - - /* This drives busses 0x00 to 0x3f */ - bus-range = <0x0 0x3f>; - - /* Legacy interrupts (note the weird polarity, the bridge seems - * to invert PCIe legacy interrupts). - * We are de-swizzling here because the numbers are actually for - * port of the root complex virtual P2P bridge. But I want - * to avoid putting a node for it in the tree, so the numbers - * below are basically de-swizzled numbers. - * The real slot is on idsel 0, so the swizzling is 1:1 - */ - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = < - 0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */ - 0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */ - 0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */ - 0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/hotfoot.dts b/arch/powerpc/boot/dts/hotfoot.dts deleted file mode 100644 index b93bf2d9dd5b..000000000000 --- a/arch/powerpc/boot/dts/hotfoot.dts +++ /dev/null @@ -1,296 +0,0 @@ -/* - * Device Tree Source for ESTeem 195E Hotfoot - * - * Copyright 2009 AbsoluteValue Systems <solomon@linux-wlan.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "est,hotfoot"; - compatible = "est,hotfoot"; - dcr-parent = <&{/cpus/cpu@0}>; - - aliases { - ethernet0 = &EMAC0; - ethernet1 = &EMAC1; - serial0 = &UART0; - serial1 = &UART1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,405EP"; - reg = <0x00000000>; - clock-frequency = <0>; /* Filled in by zImage */ - timebase-frequency = <0>; /* Filled in by zImage */ - i-cache-line-size = <0x20>; - d-cache-line-size = <0x20>; - i-cache-size = <0x4000>; - d-cache-size = <0x4000>; - dcr-controller; - dcr-access-method = "native"; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x00000000>; /* Filled in by zImage */ - }; - - UIC0: interrupt-controller { - compatible = "ibm,uic"; - interrupt-controller; - cell-index = <0>; - dcr-reg = <0x0c0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - }; - - plb { - compatible = "ibm,plb3"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clock-frequency = <0>; /* Filled in by zImage */ - - SDRAM0: memory-controller { - compatible = "ibm,sdram-405ep"; - dcr-reg = <0x010 0x002>; - }; - - MAL: mcmal { - compatible = "ibm,mcmal-405ep", "ibm,mcmal"; - dcr-reg = <0x180 0x062>; - num-tx-chans = <4>; - num-rx-chans = <2>; - interrupt-parent = <&UIC0>; - interrupts = < - 0xb 0x4 /* TXEOB */ - 0xc 0x4 /* RXEOB */ - 0xa 0x4 /* SERR */ - 0xd 0x4 /* TXDE */ - 0xe 0x4 /* RXDE */>; - }; - - POB0: opb { - compatible = "ibm,opb-405ep", "ibm,opb"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xef600000 0xef600000 0x00a00000>; - dcr-reg = <0x0a0 0x005>; - clock-frequency = <0>; /* Filled in by zImage */ - - /* Hotfoot has UART0/UART1 swapped */ - - UART0: serial@ef600400 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600400 0x00000008>; - virtual-reg = <0xef600400>; - clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <0x9600>; - interrupt-parent = <&UIC0>; - interrupts = <0x1 0x4>; - }; - - UART1: serial@ef600300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600300 0x00000008>; - virtual-reg = <0xef600300>; - clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <0x9600>; - interrupt-parent = <&UIC0>; - interrupts = <0x0 0x4>; - }; - - IIC: i2c@ef600500 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "ibm,iic-405ep", "ibm,iic"; - reg = <0xef600500 0x00000011>; - interrupt-parent = <&UIC0>; - interrupts = <0x2 0x4>; - - rtc@68 { - /* Actually a DS1339 */ - compatible = "dallas,ds1307"; - reg = <0x68>; - }; - - temp@4a { - /* Not present on all boards */ - compatible = "national,lm75"; - reg = <0x4a>; - }; - }; - - GPIO: gpio@ef600700 { - #gpio-cells = <2>; - compatible = "ibm,ppc4xx-gpio"; - reg = <0xef600700 0x00000020>; - gpio-controller; - }; - - gpio-leds { - compatible = "gpio-leds"; - status { - label = "Status"; - gpios = <&GPIO 1 0>; - }; - radiorx { - label = "Rx"; - gpios = <&GPIO 0xe 0>; - }; - }; - - EMAC0: ethernet@ef600800 { - linux,network-index = <0x0>; - device_type = "network"; - compatible = "ibm,emac-405ep", "ibm,emac"; - interrupt-parent = <&UIC0>; - interrupts = < - 0xf 0x4 /* Ethernet */ - 0x9 0x4 /* Ethernet Wake Up */>; - local-mac-address = [000000000000]; /* Filled in by zImage */ - reg = <0xef600800 0x00000070>; - mal-device = <&MAL>; - mal-tx-channel = <0>; - mal-rx-channel = <0>; - cell-index = <0>; - max-frame-size = <0x5dc>; - rx-fifo-size = <0x1000>; - tx-fifo-size = <0x800>; - phy-mode = "mii"; - phy-map = <0x00000000>; - }; - - EMAC1: ethernet@ef600900 { - linux,network-index = <0x1>; - device_type = "network"; - compatible = "ibm,emac-405ep", "ibm,emac"; - interrupt-parent = <&UIC0>; - interrupts = < - 0x11 0x4 /* Ethernet */ - 0x9 0x4 /* Ethernet Wake Up */>; - local-mac-address = [000000000000]; /* Filled in by zImage */ - reg = <0xef600900 0x00000070>; - mal-device = <&MAL>; - mal-tx-channel = <2>; - mal-rx-channel = <1>; - cell-index = <1>; - max-frame-size = <0x5dc>; - rx-fifo-size = <0x1000>; - tx-fifo-size = <0x800>; - mdio-device = <&EMAC0>; - phy-mode = "mii"; - phy-map = <0x0000001>; - }; - }; - - EBC0: ebc { - compatible = "ibm,ebc-405ep", "ibm,ebc"; - dcr-reg = <0x012 0x002>; - #address-cells = <2>; - #size-cells = <1>; - - /* The ranges property is supplied by the bootwrapper - * and is based on the firmware's configuration of the - * EBC bridge - */ - clock-frequency = <0>; /* Filled in by zImage */ - - nor_flash@0 { - compatible = "cfi-flash"; - bank-width = <2>; - reg = <0x0 0xff800000 0x00800000>; - #address-cells = <1>; - #size-cells = <1>; - - /* This mapping is for the 8M flash - 4M flash has all ofssets -= 4M, - and FeatFS partition is not present */ - partition@0 { - label = "Bootloader"; - reg = <0x7c0000 0x40000>; - /* read-only; */ - }; - partition@1 { - label = "Env_and_Config_Primary"; - reg = <0x400000 0x10000>; - }; - partition@2 { - label = "Kernel"; - reg = <0x420000 0x100000>; - }; - partition@3 { - label = "Filesystem"; - reg = <0x520000 0x2a0000>; - }; - partition@4 { - label = "Env_and_Config_Secondary"; - reg = <0x410000 0x10000>; - }; - partition@5 { - label = "FeatFS"; - reg = <0x000000 0x400000>; - }; - partition@6 { - label = "Bootloader_Env"; - reg = <0x7d0000 0x10000>; - }; - }; - }; - - PCI0: pci@ec000000 { - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "ibm,plb405ep-pci", "ibm,plb-pci"; - primary; - reg = <0xeec00000 0x00000008 /* Config space access */ - 0xeed80000 0x00000004 /* IACK */ - 0xeed80000 0x00000004 /* Special cycle */ - 0xef480000 0x00000040>; /* Internal registers */ - - /* Outbound ranges, one memory and one IO, - * later cannot be changed. Chip supports a second - * IO range but we don't use it for now - */ - ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000 - 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; - - /* Inbound 2GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; - - interrupt-parent = <&UIC0>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 3 -- slot1 (optional) 27/29 A/B IRQ2/4 */ - 0x1800 0x0 0x0 0x1 &UIC0 0x1b 0x8 - 0x1800 0x0 0x0 0x2 &UIC0 0x1d 0x8 - - /* IDSEL 4 -- slot0, 26/28 A/B IRQ1/3 */ - 0x2000 0x0 0x0 0x1 &UIC0 0x1a 0x8 - 0x2000 0x0 0x0 0x2 &UIC0 0x1c 0x8 - >; - }; - }; - - chosen { - stdout-path = &UART0; - }; -}; diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts deleted file mode 100644 index c07a7525a72c..000000000000 --- a/arch/powerpc/boot/dts/kilauea.dts +++ /dev/null @@ -1,407 +0,0 @@ -/* - * Device Tree Source for AMCC Kilauea (405EX) - * - * Copyright 2007-2009 DENX Software Engineering, Stefan Roese <sr@denx.de> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "amcc,kilauea"; - compatible = "amcc,kilauea"; - dcr-parent = <&{/cpus/cpu@0}>; - - aliases { - ethernet0 = &EMAC0; - ethernet1 = &EMAC1; - serial0 = &UART0; - serial1 = &UART1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,405EX"; - reg = <0x00000000>; - clock-frequency = <0>; /* Filled in by U-Boot */ - timebase-frequency = <0>; /* Filled in by U-Boot */ - i-cache-line-size = <32>; - d-cache-line-size = <32>; - i-cache-size = <16384>; /* 16 kB */ - d-cache-size = <16384>; /* 16 kB */ - dcr-controller; - dcr-access-method = "native"; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */ - }; - - UIC0: interrupt-controller { - compatible = "ibm,uic-405ex", "ibm,uic"; - interrupt-controller; - cell-index = <0>; - dcr-reg = <0x0c0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - }; - - UIC1: interrupt-controller1 { - compatible = "ibm,uic-405ex","ibm,uic"; - interrupt-controller; - cell-index = <1>; - dcr-reg = <0x0d0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - UIC2: interrupt-controller2 { - compatible = "ibm,uic-405ex","ibm,uic"; - interrupt-controller; - cell-index = <2>; - dcr-reg = <0x0e0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - CPM0: cpm { - compatible = "ibm,cpm"; - dcr-access-method = "native"; - dcr-reg = <0x0b0 0x003>; - unused-units = <0x00000000>; - idle-doze = <0x02000000>; - standby = <0xe3e74800>; - }; - - plb { - compatible = "ibm,plb-405ex", "ibm,plb4"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clock-frequency = <0>; /* Filled in by U-Boot */ - - SDRAM0: memory-controller { - compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2"; - dcr-reg = <0x010 0x002>; - interrupt-parent = <&UIC2>; - interrupts = <0x5 0x4 /* ECC DED Error */ - 0x6 0x4>; /* ECC SEC Error */ - }; - - CRYPTO: crypto@ef700000 { - compatible = "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto"; - reg = <0xef700000 0x80400>; - interrupt-parent = <&UIC0>; - interrupts = <0x17 0x2>; - }; - - MAL0: mcmal { - compatible = "ibm,mcmal-405ex", "ibm,mcmal2"; - dcr-reg = <0x180 0x062>; - num-tx-chans = <2>; - num-rx-chans = <2>; - interrupt-parent = <&MAL0>; - interrupts = <0x0 0x1 0x2 0x3 0x4>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 - /*RXEOB*/ 0x1 &UIC0 0xb 0x4 - /*SERR*/ 0x2 &UIC1 0x0 0x4 - /*TXDE*/ 0x3 &UIC1 0x1 0x4 - /*RXDE*/ 0x4 &UIC1 0x2 0x4>; - interrupt-map-mask = <0xffffffff>; - }; - - POB0: opb { - compatible = "ibm,opb-405ex", "ibm,opb"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x80000000 0x80000000 0x10000000 - 0xef600000 0xef600000 0x00a00000 - 0xf0000000 0xf0000000 0x10000000>; - dcr-reg = <0x0a0 0x005>; - clock-frequency = <0>; /* Filled in by U-Boot */ - - EBC0: ebc { - compatible = "ibm,ebc-405ex", "ibm,ebc"; - dcr-reg = <0x012 0x002>; - #address-cells = <2>; - #size-cells = <1>; - clock-frequency = <0>; /* Filled in by U-Boot */ - /* ranges property is supplied by U-Boot */ - interrupts = <0x5 0x1>; - interrupt-parent = <&UIC1>; - - nor_flash@0,0 { - compatible = "amd,s29gl512n", "cfi-flash"; - bank-width = <2>; - reg = <0x00000000 0x00000000 0x04000000>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "kernel"; - reg = <0x00000000 0x001e0000>; - }; - partition@1e0000 { - label = "dtb"; - reg = <0x001e0000 0x00020000>; - }; - partition@200000 { - label = "root"; - reg = <0x00200000 0x00200000>; - }; - partition@400000 { - label = "user"; - reg = <0x00400000 0x03b60000>; - }; - partition@3f60000 { - label = "env"; - reg = <0x03f60000 0x00040000>; - }; - partition@3fa0000 { - label = "u-boot"; - reg = <0x03fa0000 0x00060000>; - }; - }; - - ndfc@1,0 { - compatible = "ibm,ndfc"; - reg = <0x00000001 0x00000000 0x00002000>; - ccr = <0x00001000>; - bank-settings = <0x80002222>; - #address-cells = <1>; - #size-cells = <1>; - - nand { - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x00000000 0x00100000>; - }; - partition@100000 { - label = "user"; - reg = <0x00000000 0x03f00000>; - }; - }; - }; - }; - - UART0: serial@ef600200 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600200 0x00000008>; - virtual-reg = <0xef600200>; - clock-frequency = <0>; /* Filled in by U-Boot */ - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <0x1a 0x4>; - }; - - UART1: serial@ef600300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600300 0x00000008>; - virtual-reg = <0xef600300>; - clock-frequency = <0>; /* Filled in by U-Boot */ - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <0x1 0x4>; - }; - - IIC0: i2c@ef600400 { - compatible = "ibm,iic-405ex", "ibm,iic"; - reg = <0xef600400 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x2 0x4>; - #address-cells = <1>; - #size-cells = <0>; - - rtc@68 { - compatible = "dallas,ds1338"; - reg = <0x68>; - }; - - dtt@48 { - compatible = "dallas,ds1775"; - reg = <0x48>; - }; - }; - - IIC1: i2c@ef600500 { - compatible = "ibm,iic-405ex", "ibm,iic"; - reg = <0xef600500 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x7 0x4>; - }; - - RGMII0: emac-rgmii@ef600b00 { - compatible = "ibm,rgmii-405ex", "ibm,rgmii"; - reg = <0xef600b00 0x00000104>; - has-mdio; - }; - - EMAC0: ethernet@ef600900 { - linux,network-index = <0x0>; - device_type = "network"; - compatible = "ibm,emac-405ex", "ibm,emac4sync"; - interrupt-parent = <&EMAC0>; - interrupts = <0x0 0x1>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4 - /*Wake*/ 0x1 &UIC1 0x1d 0x4>; - reg = <0xef600900 0x000000c4>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <0>; - mal-rx-channel = <0>; - cell-index = <0>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - rx-fifo-size-gige = <16384>; - tx-fifo-size-gige = <16384>; - phy-mode = "rgmii"; - phy-map = <0x00000000>; - rgmii-device = <&RGMII0>; - rgmii-channel = <0>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; - - EMAC1: ethernet@ef600a00 { - linux,network-index = <0x1>; - device_type = "network"; - compatible = "ibm,emac-405ex", "ibm,emac4sync"; - interrupt-parent = <&EMAC1>; - interrupts = <0x0 0x1>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4 - /*Wake*/ 0x1 &UIC1 0x1f 0x4>; - reg = <0xef600a00 0x000000c4>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <1>; - mal-rx-channel = <1>; - cell-index = <1>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - rx-fifo-size-gige = <16384>; - tx-fifo-size-gige = <16384>; - phy-mode = "rgmii"; - phy-map = <0x00000000>; - rgmii-device = <&RGMII0>; - rgmii-channel = <1>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; - }; - - PCIE0: pcie@a0000000 { - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; - primary; - port = <0x0>; /* port number */ - reg = <0xa0000000 0x20000000 /* Config space access */ - 0xef000000 0x00001000>; /* Registers */ - dcr-reg = <0x040 0x020>; - sdr-base = <0x400>; - - /* Outbound ranges, one memory and one IO, - * later cannot be changed - */ - ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000 - 0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>; - - /* Inbound 2GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; - - /* This drives busses 0x00 to 0x3f */ - bus-range = <0x0 0x3f>; - - /* Legacy interrupts (note the weird polarity, the bridge seems - * to invert PCIe legacy interrupts). - * We are de-swizzling here because the numbers are actually for - * port of the root complex virtual P2P bridge. But I want - * to avoid putting a node for it in the tree, so the numbers - * below are basically de-swizzled numbers. - * The real slot is on idsel 0, so the swizzling is 1:1 - */ - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = < - 0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */ - 0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */ - 0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */ - 0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>; - }; - - PCIE1: pcie@c0000000 { - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; - primary; - port = <0x1>; /* port number */ - reg = <0xc0000000 0x20000000 /* Config space access */ - 0xef001000 0x00001000>; /* Registers */ - dcr-reg = <0x060 0x020>; - sdr-base = <0x440>; - - /* Outbound ranges, one memory and one IO, - * later cannot be changed - */ - ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000 - 0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>; - - /* Inbound 2GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; - - /* This drives busses 0x40 to 0x7f */ - bus-range = <0x40 0x7f>; - - /* Legacy interrupts (note the weird polarity, the bridge seems - * to invert PCIe legacy interrupts). - * We are de-swizzling here because the numbers are actually for - * port of the root complex virtual P2P bridge. But I want - * to avoid putting a node for it in the tree, so the numbers - * below are basically de-swizzled numbers. - * The real slot is on idsel 0, so the swizzling is 1:1 - */ - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = < - 0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */ - 0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */ - 0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */ - 0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/klondike.dts b/arch/powerpc/boot/dts/klondike.dts deleted file mode 100644 index 97432177892a..000000000000 --- a/arch/powerpc/boot/dts/klondike.dts +++ /dev/null @@ -1,212 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Device Tree for Klondike (APM8018X) board. - * - * Copyright (c) 2010, Applied Micro Circuits Corporation - * Author: Tanmay Inamdar <tinamdar@apm.com> - */ - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "apm,klondike"; - compatible = "apm,klondike"; - dcr-parent = <&{/cpus/cpu@0}>; - - aliases { - ethernet0 = &EMAC0; - ethernet1 = &EMAC1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,apm8018x"; - reg = <0x00000000>; - clock-frequency = <300000000>; /* Filled in by U-Boot */ - timebase-frequency = <300000000>; /* Filled in by U-Boot */ - i-cache-line-size = <32>; - d-cache-line-size = <32>; - i-cache-size = <16384>; /* 16 kB */ - d-cache-size = <16384>; /* 16 kB */ - dcr-controller; - dcr-access-method = "native"; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; /* Filled in by U-Boot */ - }; - - UIC0: interrupt-controller { - compatible = "ibm,uic"; - interrupt-controller; - cell-index = <0>; - dcr-reg = <0x0c0 0x010>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - }; - - UIC1: interrupt-controller1 { - compatible = "ibm,uic"; - interrupt-controller; - cell-index = <1>; - dcr-reg = <0x0d0 0x010>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - UIC2: interrupt-controller2 { - compatible = "ibm,uic"; - interrupt-controller; - cell-index = <2>; - dcr-reg = <0x0e0 0x010>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x0a 0x4 0x0b 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - UIC3: interrupt-controller3 { - compatible = "ibm,uic"; - interrupt-controller; - cell-index = <3>; - dcr-reg = <0x0f0 0x010>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - plb { - compatible = "ibm,plb4"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clock-frequency = <0>; /* Filled in by U-Boot */ - - SDRAM0: memory-controller { - compatible = "ibm,sdram-apm8018x"; - dcr-reg = <0x010 0x002>; - }; - - MAL0: mcmal { - compatible = "ibm,mcmal2"; - dcr-reg = <0x180 0x062>; - num-tx-chans = <2>; - num-rx-chans = <16>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-parent = <&UIC1>; - interrupts = </*TXEOB*/ 0x6 0x4 - /*RXEOB*/ 0x7 0x4 - /*SERR*/ 0x1 0x4 - /*TXDE*/ 0x2 0x4 - /*RXDE*/ 0x3 0x4>; - }; - - POB0: opb { - compatible = "ibm,opb"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x20000000 0x20000000 0x30000000 - 0x50000000 0x50000000 0x10000000 - 0x60000000 0x60000000 0x10000000 - 0xFE000000 0xFE000000 0x00010000>; - dcr-reg = <0x100 0x020>; - clock-frequency = <300000000>; /* Filled in by U-Boot */ - - RGMII0: emac-rgmii@400a2000 { - compatible = "ibm,rgmii"; - reg = <0x400a2000 0x00000010>; - has-mdio; - }; - - TAH0: emac-tah@400a3000 { - compatible = "ibm,tah"; - reg = <0x400a3000 0x100>; - }; - - TAH1: emac-tah@400a4000 { - compatible = "ibm,tah"; - reg = <0x400a4000 0x100>; - }; - - EMAC0: ethernet@400a0000 { - compatible = "ibm,emac4", "ibm-emac4sync"; - interrupt-parent = <&EMAC0>; - interrupts = <0x0>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4>; - reg = <0x400a0000 0x00000100>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <0x0>; - mal-rx-channel = <0x0>; - cell-index = <0>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - phy-mode = "rgmii"; - phy-address = <0x2>; - turbo = "no"; - phy-map = <0x00000000>; - rgmii-device = <&RGMII0>; - rgmii-channel = <0>; - tah-device = <&TAH0>; - tah-channel = <0>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; - - EMAC1: ethernet@400a1000 { - compatible = "ibm,emac4", "ibm-emac4sync"; - status = "disabled"; - interrupt-parent = <&EMAC1>; - interrupts = <0x0>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*Status*/ 0x0 &UIC0 0x14 0x4>; - reg = <0x400a1000 0x00000100>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <1>; - mal-rx-channel = <8>; - cell-index = <1>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - phy-mode = "rgmii"; - phy-address = <0x3>; - turbo = "no"; - phy-map = <0x00000000>; - rgmii-device = <&RGMII0>; - rgmii-channel = <1>; - tah-device = <&TAH1>; - tah-channel = <0>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - mdio-device = <&EMAC0>; - }; - }; - }; - - chosen { - stdout-path = "/plb/opb/serial@50001000"; - }; -}; diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts deleted file mode 100644 index c473cd911bca..000000000000 --- a/arch/powerpc/boot/dts/makalu.dts +++ /dev/null @@ -1,353 +0,0 @@ -/* - * Device Tree Source for AMCC Makalu (405EX) - * - * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "amcc,makalu"; - compatible = "amcc,makalu"; - dcr-parent = <&{/cpus/cpu@0}>; - - aliases { - ethernet0 = &EMAC0; - ethernet1 = &EMAC1; - serial0 = &UART0; - serial1 = &UART1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,405EX"; - reg = <0x00000000>; - clock-frequency = <0>; /* Filled in by U-Boot */ - timebase-frequency = <0>; /* Filled in by U-Boot */ - i-cache-line-size = <32>; - d-cache-line-size = <32>; - i-cache-size = <16384>; /* 16 kB */ - d-cache-size = <16384>; /* 16 kB */ - dcr-controller; - dcr-access-method = "native"; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */ - }; - - UIC0: interrupt-controller { - compatible = "ibm,uic-405ex", "ibm,uic"; - interrupt-controller; - cell-index = <0>; - dcr-reg = <0x0c0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - }; - - UIC1: interrupt-controller1 { - compatible = "ibm,uic-405ex","ibm,uic"; - interrupt-controller; - cell-index = <1>; - dcr-reg = <0x0d0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - UIC2: interrupt-controller2 { - compatible = "ibm,uic-405ex","ibm,uic"; - interrupt-controller; - cell-index = <2>; - dcr-reg = <0x0e0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - plb { - compatible = "ibm,plb-405ex", "ibm,plb4"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clock-frequency = <0>; /* Filled in by U-Boot */ - - SDRAM0: memory-controller { - compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2"; - dcr-reg = <0x010 0x002>; - interrupt-parent = <&UIC2>; - interrupts = <0x5 0x4 /* ECC DED Error */ - 0x6 0x4 /* ECC SEC Error */ >; - }; - - MAL0: mcmal { - compatible = "ibm,mcmal-405ex", "ibm,mcmal2"; - dcr-reg = <0x180 0x062>; - num-tx-chans = <2>; - num-rx-chans = <2>; - interrupt-parent = <&MAL0>; - interrupts = <0x0 0x1 0x2 0x3 0x4>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 - /*RXEOB*/ 0x1 &UIC0 0xb 0x4 - /*SERR*/ 0x2 &UIC1 0x0 0x4 - /*TXDE*/ 0x3 &UIC1 0x1 0x4 - /*RXDE*/ 0x4 &UIC1 0x2 0x4>; - interrupt-map-mask = <0xffffffff>; - }; - - POB0: opb { - compatible = "ibm,opb-405ex", "ibm,opb"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x80000000 0x80000000 0x10000000 - 0xef600000 0xef600000 0x00a00000 - 0xf0000000 0xf0000000 0x10000000>; - dcr-reg = <0x0a0 0x005>; - clock-frequency = <0>; /* Filled in by U-Boot */ - - EBC0: ebc { - compatible = "ibm,ebc-405ex", "ibm,ebc"; - dcr-reg = <0x012 0x002>; - #address-cells = <2>; - #size-cells = <1>; - clock-frequency = <0>; /* Filled in by U-Boot */ - /* ranges property is supplied by U-Boot */ - interrupts = <0x5 0x1>; - interrupt-parent = <&UIC1>; - - nor_flash@0,0 { - compatible = "amd,s29gl512n", "cfi-flash"; - bank-width = <2>; - reg = <0x00000000 0x00000000 0x04000000>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "kernel"; - reg = <0x00000000 0x00200000>; - }; - partition@200000 { - label = "root"; - reg = <0x00200000 0x00200000>; - }; - partition@400000 { - label = "user"; - reg = <0x00400000 0x03b60000>; - }; - partition@3f60000 { - label = "env"; - reg = <0x03f60000 0x00040000>; - }; - partition@3fa0000 { - label = "u-boot"; - reg = <0x03fa0000 0x00060000>; - }; - }; - }; - - UART0: serial@ef600200 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600200 0x00000008>; - virtual-reg = <0xef600200>; - clock-frequency = <0>; /* Filled in by U-Boot */ - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <0x1a 0x4>; - }; - - UART1: serial@ef600300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600300 0x00000008>; - virtual-reg = <0xef600300>; - clock-frequency = <0>; /* Filled in by U-Boot */ - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <0x1 0x4>; - }; - - IIC0: i2c@ef600400 { - compatible = "ibm,iic-405ex", "ibm,iic"; - reg = <0xef600400 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x2 0x4>; - }; - - IIC1: i2c@ef600500 { - compatible = "ibm,iic-405ex", "ibm,iic"; - reg = <0xef600500 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x7 0x4>; - }; - - - RGMII0: emac-rgmii@ef600b00 { - compatible = "ibm,rgmii-405ex", "ibm,rgmii"; - reg = <0xef600b00 0x00000104>; - has-mdio; - }; - - EMAC0: ethernet@ef600900 { - linux,network-index = <0x0>; - device_type = "network"; - compatible = "ibm,emac-405ex", "ibm,emac4sync"; - interrupt-parent = <&EMAC0>; - interrupts = <0x0 0x1>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4 - /*Wake*/ 0x1 &UIC1 0x1d 0x4>; - reg = <0xef600900 0x000000c4>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <0>; - mal-rx-channel = <0>; - cell-index = <0>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - rx-fifo-size-gige = <16384>; - tx-fifo-size-gige = <16384>; - phy-mode = "rgmii"; - phy-map = <0x0000003f>; /* Start at 6 */ - rgmii-device = <&RGMII0>; - rgmii-channel = <0>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; - - EMAC1: ethernet@ef600a00 { - linux,network-index = <0x1>; - device_type = "network"; - compatible = "ibm,emac-405ex", "ibm,emac4sync"; - interrupt-parent = <&EMAC1>; - interrupts = <0x0 0x1>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4 - /*Wake*/ 0x1 &UIC1 0x1f 0x4>; - reg = <0xef600a00 0x000000c4>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <1>; - mal-rx-channel = <1>; - cell-index = <1>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - rx-fifo-size-gige = <16384>; - tx-fifo-size-gige = <16384>; - phy-mode = "rgmii"; - phy-map = <0x00000000>; - rgmii-device = <&RGMII0>; - rgmii-channel = <1>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; - }; - - PCIE0: pcie@a0000000 { - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; - primary; - port = <0x0>; /* port number */ - reg = <0xa0000000 0x20000000 /* Config space access */ - 0xef000000 0x00001000>; /* Registers */ - dcr-reg = <0x040 0x020>; - sdr-base = <0x400>; - - /* Outbound ranges, one memory and one IO, - * later cannot be changed - */ - ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000 - 0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>; - - /* Inbound 2GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; - - /* This drives busses 0x00 to 0x3f */ - bus-range = <0x0 0x3f>; - - /* Legacy interrupts (note the weird polarity, the bridge seems - * to invert PCIe legacy interrupts). - * We are de-swizzling here because the numbers are actually for - * port of the root complex virtual P2P bridge. But I want - * to avoid putting a node for it in the tree, so the numbers - * below are basically de-swizzled numbers. - * The real slot is on idsel 0, so the swizzling is 1:1 - */ - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = < - 0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */ - 0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */ - 0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */ - 0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>; - }; - - PCIE1: pcie@c0000000 { - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; - primary; - port = <0x1>; /* port number */ - reg = <0xc0000000 0x20000000 /* Config space access */ - 0xef001000 0x00001000>; /* Registers */ - dcr-reg = <0x060 0x020>; - sdr-base = <0x440>; - - /* Outbound ranges, one memory and one IO, - * later cannot be changed - */ - ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000 - 0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>; - - /* Inbound 2GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; - - /* This drives busses 0x40 to 0x7f */ - bus-range = <0x40 0x7f>; - - /* Legacy interrupts (note the weird polarity, the bridge seems - * to invert PCIe legacy interrupts). - * We are de-swizzling here because the numbers are actually for - * port of the root complex virtual P2P bridge. But I want - * to avoid putting a node for it in the tree, so the numbers - * below are basically de-swizzled numbers. - * The real slot is on idsel 0, so the swizzling is 1:1 - */ - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = < - 0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */ - 0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */ - 0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */ - 0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/microwatt.dts b/arch/powerpc/boot/dts/microwatt.dts index b69db1d275cd..292b909ca9ce 100644 --- a/arch/powerpc/boot/dts/microwatt.dts +++ b/arch/powerpc/boot/dts/microwatt.dts @@ -1,13 +1,15 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> / { #size-cells = <0x02>; #address-cells = <0x02>; - model-name = "microwatt"; + model = "microwatt"; compatible = "microwatt-soc"; aliases { serial0 = &UART0; + ethernet = &enet0; }; reserved-memory { @@ -21,46 +23,93 @@ reg = <0x00000000 0x00000000 0x00000000 0x10000000>; }; + clocks { + sys_clk: litex_sys_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <100000000>; + }; + }; + cpus { #size-cells = <0x00>; #address-cells = <0x01>; ibm,powerpc-cpu-features { display-name = "Microwatt"; - isa = <3000>; + isa = <3100>; device_type = "cpu-features"; compatible = "ibm,powerpc-cpu-features"; mmu-radix { isa = <3000>; - usable-privilege = <2>; + usable-privilege = <6>; + os-support = <0>; }; little-endian { - isa = <2050>; - usable-privilege = <3>; + isa = <0>; + usable-privilege = <7>; + os-support = <0>; hwcap-bit-nr = <1>; }; cache-inhibited-large-page { - isa = <2040>; - usable-privilege = <2>; + isa = <0>; + usable-privilege = <6>; + os-support = <0>; }; fixed-point-v3 { isa = <3000>; - usable-privilege = <3>; + usable-privilege = <7>; }; no-execute { - isa = <2010>; + isa = <0x00>; usable-privilege = <2>; + os-support = <0>; }; floating-point { + hfscr-bit-nr = <0>; hwcap-bit-nr = <27>; isa = <0>; - usable-privilege = <3>; + usable-privilege = <7>; + hv-support = <1>; + os-support = <0>; + }; + + prefixed-instructions { + hfscr-bit-nr = <13>; + fscr-bit-nr = <13>; + isa = <3010>; + usable-privilege = <7>; + os-support = <1>; + hv-support = <1>; + }; + + tar { + hfscr-bit-nr = <8>; + fscr-bit-nr = <8>; + isa = <2070>; + usable-privilege = <7>; + os-support = <1>; + hv-support = <1>; + hwcap-bit-nr = <58>; + }; + + control-register { + isa = <0>; + usable-privilege = <7>; + }; + + system-call-vectored { + isa = <3000>; + usable-privilege = <7>; + os-support = <1>; + fscr-bit-nr = <12>; + hwcap-bit-nr = <52>; }; }; @@ -93,6 +142,36 @@ ibm,mmu-lpid-bits = <12>; ibm,mmu-pid-bits = <20>; }; + + PowerPC,Microwatt@1 { + i-cache-sets = <2>; + ibm,dec-bits = <64>; + reservation-granule-size = <64>; + clock-frequency = <100000000>; + timebase-frequency = <100000000>; + i-tlb-sets = <1>; + ibm,ppc-interrupt-server#s = <1>; + i-cache-block-size = <64>; + d-cache-block-size = <64>; + d-cache-sets = <2>; + i-tlb-size = <64>; + cpu-version = <0x990000>; + status = "okay"; + i-cache-size = <0x1000>; + ibm,processor-radix-AP-encodings = <0x0c 0xa0000010 0x20000015 0x4000001e>; + tlb-size = <0>; + tlb-sets = <0>; + device_type = "cpu"; + d-tlb-size = <128>; + d-tlb-sets = <2>; + reg = <1>; + general-purpose; + 64-bit; + d-cache-size = <0x1000>; + ibm,chip-id = <0>; + ibm,mmu-lpid-bits = <12>; + ibm,mmu-pid-bits = <20>; + }; }; soc@c0000000 { @@ -105,8 +184,8 @@ interrupt-controller@4000 { compatible = "openpower,xics-presentation", "ibm,ppc-xicp"; - ibm,interrupt-server-ranges = <0x0 0x1>; - reg = <0x4000 0x100>; + ibm,interrupt-server-ranges = <0x0 0x2>; + reg = <0x4000 0x10 0x4010 0x10>; }; ICS: interrupt-controller@5000 { @@ -130,7 +209,18 @@ interrupts = <0x10 0x1>; }; - ethernet@8020000 { + gpio: gpio@7000 { + device_type = "gpio"; + compatible = "faraday,ftgpio010"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x7000 0x80>; + interrupts = <0x14 1>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + enet0: ethernet@8020000 { compatible = "litex,liteeth"; reg = <0x8021000 0x100 0x8020800 0x100 @@ -141,6 +231,19 @@ litex,slot-size = <0x800>; interrupts = <0x11 0x1>; }; + + mmc@8040000 { + compatible = "litex,mmc"; + reg = <0x8042800 0x800 + 0x8041000 0x800 + 0x8040800 0x800 + 0x8042000 0x800 + 0x8041800 0x800>; + reg-names = "phy", "core", "reader", "writer", "irq"; + bus-width = <4>; + interrupts = <0x13 1>; + clocks = <&sys_clk>; + }; }; chosen { diff --git a/arch/powerpc/boot/dts/mpc5121.dtsi b/arch/powerpc/boot/dts/mpc5121.dtsi index 3f66b91a8e3c..a278fb7b9e71 100644 --- a/arch/powerpc/boot/dts/mpc5121.dtsi +++ b/arch/powerpc/boot/dts/mpc5121.dtsi @@ -112,7 +112,7 @@ }; /* Watchdog timer */ - wdt@900 { + watchdog@900 { compatible = "fsl,mpc5121-wdt"; reg = <0x900 0x100>; }; @@ -140,7 +140,7 @@ }; /* Power Management Controller */ - pmc@1000{ + pmc@1000 { compatible = "fsl,mpc5121-pmc"; reg = <0x1000 0x100>; interrupts = <83 0x8>; diff --git a/arch/powerpc/boot/dts/mpc5125twr.dts b/arch/powerpc/boot/dts/mpc5125twr.dts index 0bd2acc0401d..ee090709aa3a 100644 --- a/arch/powerpc/boot/dts/mpc5125twr.dts +++ b/arch/powerpc/boot/dts/mpc5125twr.dts @@ -104,7 +104,7 @@ clock-names = "osc"; }; - pmc@1000{ // Power Management Controller + pmc@1000 { // Power Management Controller compatible = "fsl,mpc5121-pmc"; reg = <0x1000 0x100>; interrupts = <83 0x2>; diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts deleted file mode 100644 index 9494af160e95..000000000000 --- a/arch/powerpc/boot/dts/mpc7448hpc2.dts +++ /dev/null @@ -1,192 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * MPC7448HPC2 (Taiga) board Device Tree Source - * - * Copyright 2006, 2008 Freescale Semiconductor Inc. - * 2006 Roy Zang <Roy Zang at freescale.com>. - */ - -/dts-v1/; - -/ { - model = "mpc7448hpc2"; - compatible = "mpc74xx"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - - serial0 = &serial0; - serial1 = &serial1; - - pci0 = &pci0; - }; - - cpus { - #address-cells = <1>; - #size-cells =<0>; - - PowerPC,7448@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K bytes - i-cache-size = <0x8000>; // L1, 32K bytes - timebase-frequency = <0>; // 33 MHz, from uboot - clock-frequency = <0>; // From U-Boot - bus-frequency = <0>; // From U-Boot - }; - }; - - memory { - device_type = "memory"; - reg = <0x0 0x20000000 // DDR2 512M at 0 - >; - }; - - tsi108@c0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "tsi-bridge"; - ranges = <0x0 0xc0000000 0x10000>; - reg = <0xc0000000 0x10000>; - bus-frequency = <0>; - - i2c@7000 { - interrupt-parent = <&mpic>; - interrupts = <14 0>; - reg = <0x7000 0x400>; - device_type = "i2c"; - compatible = "tsi108-i2c"; - }; - - MDIO: mdio@6000 { - compatible = "tsi108-mdio"; - reg = <0x6000 0x50>; - #address-cells = <1>; - #size-cells = <0>; - - phy8: ethernet-phy@8 { - interrupt-parent = <&mpic>; - interrupts = <2 1>; - reg = <0x8>; - }; - - phy9: ethernet-phy@9 { - interrupt-parent = <&mpic>; - interrupts = <2 1>; - reg = <0x9>; - }; - - }; - - enet0: ethernet@6200 { - linux,network-index = <0>; - #size-cells = <0>; - device_type = "network"; - compatible = "tsi108-ethernet"; - reg = <0x6000 0x200>; - address = [ 00 06 D2 00 00 01 ]; - interrupts = <16 2>; - interrupt-parent = <&mpic>; - mdio-handle = <&MDIO>; - phy-handle = <&phy8>; - }; - - enet1: ethernet@6600 { - linux,network-index = <1>; - #address-cells = <1>; - #size-cells = <0>; - device_type = "network"; - compatible = "tsi108-ethernet"; - reg = <0x6400 0x200>; - address = [ 00 06 D2 00 00 02 ]; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - mdio-handle = <&MDIO>; - phy-handle = <&phy9>; - }; - - serial0: serial@7808 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0x7808 0x200>; - clock-frequency = <1064000000>; - interrupts = <12 0>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@7c08 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0x7c08 0x200>; - clock-frequency = <1064000000>; - interrupts = <13 0>; - interrupt-parent = <&mpic>; - }; - - mpic: pic@7400 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x7400 0x400>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - pci0: pci@1000 { - compatible = "tsi108-pci"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0x1000 0x1000>; - bus-range = <0 0>; - ranges = <0x2000000 0x0 0xe0000000 0xe0000000 0x0 0x1a000000 - 0x1000000 0x0 0x0 0xfa000000 0x0 0x10000>; - clock-frequency = <133333332>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x11 */ - 0x800 0x0 0x0 0x1 &RT0 0x24 0x0 - 0x800 0x0 0x0 0x2 &RT0 0x25 0x0 - 0x800 0x0 0x0 0x3 &RT0 0x26 0x0 - 0x800 0x0 0x0 0x4 &RT0 0x27 0x0 - - /* IDSEL 0x12 */ - 0x1000 0x0 0x0 0x1 &RT0 0x25 0x0 - 0x1000 0x0 0x0 0x2 &RT0 0x26 0x0 - 0x1000 0x0 0x0 0x3 &RT0 0x27 0x0 - 0x1000 0x0 0x0 0x4 &RT0 0x24 0x0 - - /* IDSEL 0x13 */ - 0x1800 0x0 0x0 0x1 &RT0 0x26 0x0 - 0x1800 0x0 0x0 0x2 &RT0 0x27 0x0 - 0x1800 0x0 0x0 0x3 &RT0 0x24 0x0 - 0x1800 0x0 0x0 0x4 &RT0 0x25 0x0 - - /* IDSEL 0x14 */ - 0x2000 0x0 0x0 0x1 &RT0 0x27 0x0 - 0x2000 0x0 0x0 0x2 &RT0 0x24 0x0 - 0x2000 0x0 0x0 0x3 &RT0 0x25 0x0 - 0x2000 0x0 0x0 0x4 &RT0 0x26 0x0 - >; - - RT0: router@1180 { - clock-frequency = <0>; - interrupt-controller; - device_type = "pic-router"; - #address-cells = <0>; - #interrupt-cells = <2>; - big-endian; - interrupts = <23 2>; - interrupt-parent = <&mpic>; - }; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts deleted file mode 100644 index 13ec786f6adf..000000000000 --- a/arch/powerpc/boot/dts/mpc8272ads.dts +++ /dev/null @@ -1,263 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * MPC8272 ADS Device Tree Source - * - * Copyright 2005,2008 Freescale Semiconductor Inc. - */ - -/dts-v1/; - -/ { - model = "MPC8272ADS"; - compatible = "fsl,mpc8272ads"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = ð0; - ethernet1 = ð1; - serial0 = &scc1; - serial1 = &scc4; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8272@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <16384>; - i-cache-size = <16384>; - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - }; - }; - - memory { - device_type = "memory"; - reg = <0x0 0x0>; - }; - - localbus@f0010100 { - compatible = "fsl,mpc8272-localbus", - "fsl,pq2-localbus"; - #address-cells = <2>; - #size-cells = <1>; - reg = <0xf0010100 0x40>; - - ranges = <0x0 0x0 0xff800000 0x00800000 - 0x1 0x0 0xf4500000 0x8000 - 0x3 0x0 0xf8200000 0x8000>; - - flash@0,0 { - compatible = "jedec-flash"; - reg = <0x0 0x0 0x00800000>; - bank-width = <4>; - device-width = <1>; - }; - - board-control@1,0 { - reg = <0x1 0x0 0x20>; - compatible = "fsl,mpc8272ads-bcsr"; - }; - - PCI_PIC: interrupt-controller@3,0 { - compatible = "fsl,mpc8272ads-pci-pic", - "fsl,pq2ads-pci-pic"; - #interrupt-cells = <1>; - interrupt-controller; - reg = <0x3 0x0 0x8>; - interrupt-parent = <&PIC>; - interrupts = <20 8>; - }; - }; - - - pci@f0010800 { - device_type = "pci"; - reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>; - compatible = "fsl,mpc8272-pci", "fsl,pq2-pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - clock-frequency = <66666666>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x16 */ - 0xb000 0x0 0x0 0x1 &PCI_PIC 0 - 0xb000 0x0 0x0 0x2 &PCI_PIC 1 - 0xb000 0x0 0x0 0x3 &PCI_PIC 2 - 0xb000 0x0 0x0 0x4 &PCI_PIC 3 - - /* IDSEL 0x17 */ - 0xb800 0x0 0x0 0x1 &PCI_PIC 4 - 0xb800 0x0 0x0 0x2 &PCI_PIC 5 - 0xb800 0x0 0x0 0x3 &PCI_PIC 6 - 0xb800 0x0 0x0 0x4 &PCI_PIC 7 - - /* IDSEL 0x18 */ - 0xc000 0x0 0x0 0x1 &PCI_PIC 8 - 0xc000 0x0 0x0 0x2 &PCI_PIC 9 - 0xc000 0x0 0x0 0x3 &PCI_PIC 10 - 0xc000 0x0 0x0 0x4 &PCI_PIC 11>; - - interrupt-parent = <&PIC>; - interrupts = <18 8>; - ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000 - 0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>; - }; - - soc@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "fsl,mpc8272", "fsl,pq2-soc"; - ranges = <0x0 0xf0000000 0x53000>; - - // Temporary -- will go away once kernel uses ranges for get_immrbase(). - reg = <0xf0000000 0x53000>; - - cpm@119c0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8272-cpm", "fsl,cpm2"; - reg = <0x119c0 0x30>; - ranges; - - muram@0 { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x10000>; - - data@0 { - compatible = "fsl,cpm-muram-data"; - reg = <0x0 0x2000 0x9800 0x800>; - }; - }; - - brg@119f0 { - compatible = "fsl,mpc8272-brg", - "fsl,cpm2-brg", - "fsl,cpm-brg"; - reg = <0x119f0 0x10 0x115f0 0x10>; - }; - - scc1: serial@11a00 { - device_type = "serial"; - compatible = "fsl,mpc8272-scc-uart", - "fsl,cpm2-scc-uart"; - reg = <0x11a00 0x20 0x8000 0x100>; - interrupts = <40 8>; - interrupt-parent = <&PIC>; - fsl,cpm-brg = <1>; - fsl,cpm-command = <0x800000>; - }; - - scc4: serial@11a60 { - device_type = "serial"; - compatible = "fsl,mpc8272-scc-uart", - "fsl,cpm2-scc-uart"; - reg = <0x11a60 0x20 0x8300 0x100>; - interrupts = <43 8>; - interrupt-parent = <&PIC>; - fsl,cpm-brg = <4>; - fsl,cpm-command = <0xce00000>; - }; - - usb@11b60 { - compatible = "fsl,mpc8272-cpm-usb"; - reg = <0x11b60 0x40 0x8b00 0x100>; - interrupts = <11 8>; - interrupt-parent = <&PIC>; - mode = "peripheral"; - }; - - mdio@10d40 { - compatible = "fsl,mpc8272ads-mdio-bitbang", - "fsl,mpc8272-mdio-bitbang", - "fsl,cpm2-mdio-bitbang"; - reg = <0x10d40 0x14>; - #address-cells = <1>; - #size-cells = <0>; - fsl,mdio-pin = <18>; - fsl,mdc-pin = <19>; - - PHY0: ethernet-phy@0 { - interrupt-parent = <&PIC>; - interrupts = <23 8>; - reg = <0x0>; - }; - - PHY1: ethernet-phy@1 { - interrupt-parent = <&PIC>; - interrupts = <23 8>; - reg = <0x3>; - }; - }; - - eth0: ethernet@11300 { - device_type = "network"; - compatible = "fsl,mpc8272-fcc-enet", - "fsl,cpm2-fcc-enet"; - reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <32 8>; - interrupt-parent = <&PIC>; - phy-handle = <&PHY0>; - linux,network-index = <0>; - fsl,cpm-command = <0x12000300>; - }; - - eth1: ethernet@11320 { - device_type = "network"; - compatible = "fsl,mpc8272-fcc-enet", - "fsl,cpm2-fcc-enet"; - reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <33 8>; - interrupt-parent = <&PIC>; - phy-handle = <&PHY1>; - linux,network-index = <1>; - fsl,cpm-command = <0x16200300>; - }; - - i2c@11860 { - compatible = "fsl,mpc8272-i2c", - "fsl,cpm2-i2c"; - reg = <0x11860 0x20 0x8afc 0x2>; - interrupts = <1 8>; - interrupt-parent = <&PIC>; - fsl,cpm-command = <0x29600000>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - PIC: interrupt-controller@10c00 { - #interrupt-cells = <2>; - interrupt-controller; - reg = <0x10c00 0x80>; - compatible = "fsl,mpc8272-pic", "fsl,cpm2-pic"; - }; - - crypto@30000 { - compatible = "fsl,sec1.0"; - reg = <0x40000 0x13000>; - interrupts = <47 0x8>; - interrupt-parent = <&PIC>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x7e>; - fsl,descriptor-types-mask = <0x1010415>; - }; - }; - - chosen { - stdout-path = "/soc/cpm/serial@11a00"; - }; -}; diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts index a8315795b2c9..09508b4c8c73 100644 --- a/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -99,7 +99,7 @@ reg = <0xe0000000 0x00000200>; bus-frequency = <0>; - wdt@200 { + watchdog@200 { device_type = "watchdog"; compatible = "mpc83xx_wdt"; reg = <0x200 0x100>; diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts index e09b37d7489d..a8f68d6e50b0 100644 --- a/arch/powerpc/boot/dts/mpc8315erdb.dts +++ b/arch/powerpc/boot/dts/mpc8315erdb.dts @@ -6,6 +6,7 @@ */ /dts-v1/; +#include <dt-bindings/interrupt-controller/irq.h> / { compatible = "fsl,mpc8315erdb"; @@ -99,7 +100,7 @@ reg = <0xe0000000 0x00000200>; bus-frequency = <0>; - wdt@200 { + watchdog@200 { device_type = "watchdog"; compatible = "mpc83xx_wdt"; reg = <0x200 0x100>; @@ -358,6 +359,15 @@ interrupt-parent = <&ipic>; fsl,mpc8313-wakeup-timer = <>m1>; }; + + gpio: gpio-controller@c00 { + compatible = "fsl,mpc8314-gpio"; + reg = <0xc00 0x100>; + interrupts = <74 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + gpio-controller; + #gpio-cells = <2>; + }; }; pci0: pci@e0008500 { diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts deleted file mode 100644 index 3af073f01e71..000000000000 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ /dev/null @@ -1,436 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * MPC8323E EMDS Device Tree Source - * - * Copyright 2006 Freescale Semiconductor Inc. - * - - * To enable external serial I/O on a Freescale MPC 8323 SYS/MDS board, do - * this: - * - * 1) On chip U61, lift (disconnect) pins 21 (TXD) and 22 (RXD) from the board. - * 2) Solder a wire from U61-21 to P19A-23. P19 is a grid of pins on the board - * next to the serial ports. - * 3) Solder a wire from U61-22 to P19K-22. - * - * Note that there's a typo in the schematic. The board labels the last column - * of pins "P19K", but in the schematic, that column is called "P19J". So if - * you're going by the schematic, the pin is called "P19J-K22". - */ - -/dts-v1/; - -/ { - model = "MPC8323EMDS"; - compatible = "MPC8323EMDS", "MPC832xMDS", "MPC83xxMDS"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8323@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <16384>; // L1, 16K - i-cache-size = <16384>; // L1, 16K - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x08000000>; - }; - - bcsr@f8000000 { - compatible = "fsl,mpc8323mds-bcsr"; - reg = <0xf8000000 0x8000>; - }; - - soc8323@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xe0000000 0x00100000>; - reg = <0xe0000000 0x00000200>; - bus-frequency = <132000000>; - - wdt@200 { - device_type = "watchdog"; - compatible = "mpc83xx_wdt"; - reg = <0x200 0x100>; - }; - - pmc: power@b00 { - compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc"; - reg = <0xb00 0x100 0xa00 0x100>; - interrupts = <80 0x8>; - interrupt-parent = <&ipic>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <14 0x8>; - interrupt-parent = <&ipic>; - dfsrr; - - rtc@68 { - compatible = "dallas,ds1374"; - reg = <0x68>; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <9 0x8>; - interrupt-parent = <&ipic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <10 0x8>; - interrupt-parent = <&ipic>; - }; - - dma@82a8 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8323-dma", "fsl,elo-dma"; - reg = <0x82a8 4>; - ranges = <0 0x8100 0x1a8>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; - reg = <0 0x80>; - cell-index = <0>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@80 { - compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@100 { - compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@180 { - compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; - reg = <0x180 0x28>; - cell-index = <3>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - }; - - crypto@30000 { - compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <11 0x8>; - interrupt-parent = <&ipic>; - fsl,num-channels = <1>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x4c>; - fsl,descriptor-types-mask = <0x0122003f>; - sleep = <&pmc 0x03000000>; - }; - - ipic: pic@700 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x700 0x100>; - device_type = "ipic"; - }; - - par_io@1400 { - reg = <0x1400 0x100>; - device_type = "par_io"; - num-ports = <7>; - - pio3: ucc_pin@3 { - pio-map = < - /* port pin dir open_drain assignment has_irq */ - 3 4 3 0 2 0 /* MDIO */ - 3 5 1 0 2 0 /* MDC */ - 0 13 2 0 1 0 /* RX_CLK (CLK9) */ - 3 24 2 0 1 0 /* TX_CLK (CLK10) */ - 1 0 1 0 1 0 /* TxD0 */ - 1 1 1 0 1 0 /* TxD1 */ - 1 2 1 0 1 0 /* TxD2 */ - 1 3 1 0 1 0 /* TxD3 */ - 1 4 2 0 1 0 /* RxD0 */ - 1 5 2 0 1 0 /* RxD1 */ - 1 6 2 0 1 0 /* RxD2 */ - 1 7 2 0 1 0 /* RxD3 */ - 1 8 2 0 1 0 /* RX_ER */ - 1 9 1 0 1 0 /* TX_ER */ - 1 10 2 0 1 0 /* RX_DV */ - 1 11 2 0 1 0 /* COL */ - 1 12 1 0 1 0 /* TX_EN */ - 1 13 2 0 1 0>; /* CRS */ - }; - pio4: ucc_pin@4 { - pio-map = < - /* port pin dir open_drain assignment has_irq */ - 3 31 2 0 1 0 /* RX_CLK (CLK7) */ - 3 6 2 0 1 0 /* TX_CLK (CLK8) */ - 1 18 1 0 1 0 /* TxD0 */ - 1 19 1 0 1 0 /* TxD1 */ - 1 20 1 0 1 0 /* TxD2 */ - 1 21 1 0 1 0 /* TxD3 */ - 1 22 2 0 1 0 /* RxD0 */ - 1 23 2 0 1 0 /* RxD1 */ - 1 24 2 0 1 0 /* RxD2 */ - 1 25 2 0 1 0 /* RxD3 */ - 1 26 2 0 1 0 /* RX_ER */ - 1 27 1 0 1 0 /* TX_ER */ - 1 28 2 0 1 0 /* RX_DV */ - 1 29 2 0 1 0 /* COL */ - 1 30 1 0 1 0 /* TX_EN */ - 1 31 2 0 1 0>; /* CRS */ - }; - pio5: ucc_pin@5 { - pio-map = < - /* - * open has - * port pin dir drain sel irq - */ - 2 0 1 0 2 0 /* TxD5 */ - 2 8 2 0 2 0 /* RxD5 */ - - 2 29 2 0 0 0 /* CTS5 */ - 2 31 1 0 2 0 /* RTS5 */ - - 2 24 2 0 0 0 /* CD */ - - >; - }; - - }; - }; - - qe@e0100000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "qe"; - compatible = "fsl,qe"; - ranges = <0x0 0xe0100000 0x00100000>; - reg = <0xe0100000 0x480>; - brg-frequency = <0>; - bus-frequency = <198000000>; - fsl,qe-num-riscs = <1>; - fsl,qe-num-snums = <28>; - - muram@10000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,qe-muram", "fsl,cpm-muram"; - ranges = <0x0 0x00010000 0x00004000>; - - data-only@0 { - compatible = "fsl,qe-muram-data", - "fsl,cpm-muram-data"; - reg = <0x0 0x4000>; - }; - }; - - spi@4c0 { - cell-index = <0>; - compatible = "fsl,spi"; - reg = <0x4c0 0x40>; - interrupts = <2>; - interrupt-parent = <&qeic>; - mode = "cpu"; - }; - - spi@500 { - cell-index = <1>; - compatible = "fsl,spi"; - reg = <0x500 0x40>; - interrupts = <1>; - interrupt-parent = <&qeic>; - mode = "cpu"; - }; - - usb@6c0 { - compatible = "qe_udc"; - reg = <0x6c0 0x40 0x8b00 0x100>; - interrupts = <11>; - interrupt-parent = <&qeic>; - mode = "slave"; - }; - - enet0: ucc@2200 { - device_type = "network"; - compatible = "ucc_geth"; - cell-index = <3>; - reg = <0x2200 0x200>; - interrupts = <34>; - interrupt-parent = <&qeic>; - local-mac-address = [ 00 00 00 00 00 00 ]; - rx-clock-name = "clk9"; - tx-clock-name = "clk10"; - phy-handle = <&phy3>; - pio-handle = <&pio3>; - }; - - enet1: ucc@3200 { - device_type = "network"; - compatible = "ucc_geth"; - cell-index = <4>; - reg = <0x3200 0x200>; - interrupts = <35>; - interrupt-parent = <&qeic>; - local-mac-address = [ 00 00 00 00 00 00 ]; - rx-clock-name = "clk7"; - tx-clock-name = "clk8"; - phy-handle = <&phy4>; - pio-handle = <&pio4>; - }; - - ucc@2400 { - device_type = "serial"; - compatible = "ucc_uart"; - cell-index = <5>; /* The UCC number, 1-7*/ - port-number = <0>; /* Which ttyQEx device */ - soft-uart; /* We need Soft-UART */ - reg = <0x2400 0x200>; - interrupts = <40>; /* From Table 18-12 */ - interrupt-parent = < &qeic >; - /* - * For Soft-UART, we need to set TX to 1X, which - * means specifying separate clock sources. - */ - rx-clock-name = "brg5"; - tx-clock-name = "brg6"; - pio-handle = < &pio5 >; - }; - - - mdio@2320 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x2320 0x18>; - compatible = "fsl,ucc-mdio"; - - phy3: ethernet-phy@3 { - interrupt-parent = <&ipic>; - interrupts = <17 0x8>; - reg = <0x3>; - }; - phy4: ethernet-phy@4 { - interrupt-parent = <&ipic>; - interrupts = <18 0x8>; - reg = <0x4>; - }; - }; - - qeic: interrupt-controller@80 { - interrupt-controller; - compatible = "fsl,qe-ic"; - #address-cells = <0>; - #interrupt-cells = <1>; - reg = <0x80 0x80>; - big-endian; - interrupts = <32 0x8 33 0x8>; //high:32 low:33 - interrupt-parent = <&ipic>; - }; - }; - - pci0: pci@e0008500 { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x11 AD17 */ - 0x8800 0x0 0x0 0x1 &ipic 20 0x8 - 0x8800 0x0 0x0 0x2 &ipic 21 0x8 - 0x8800 0x0 0x0 0x3 &ipic 22 0x8 - 0x8800 0x0 0x0 0x4 &ipic 23 0x8 - - /* IDSEL 0x12 AD18 */ - 0x9000 0x0 0x0 0x1 &ipic 22 0x8 - 0x9000 0x0 0x0 0x2 &ipic 23 0x8 - 0x9000 0x0 0x0 0x3 &ipic 20 0x8 - 0x9000 0x0 0x0 0x4 &ipic 21 0x8 - - /* IDSEL 0x13 AD19 */ - 0x9800 0x0 0x0 0x1 &ipic 23 0x8 - 0x9800 0x0 0x0 0x2 &ipic 20 0x8 - 0x9800 0x0 0x0 0x3 &ipic 21 0x8 - 0x9800 0x0 0x0 0x4 &ipic 22 0x8 - - /* IDSEL 0x15 AD21*/ - 0xa800 0x0 0x0 0x1 &ipic 20 0x8 - 0xa800 0x0 0x0 0x2 &ipic 21 0x8 - 0xa800 0x0 0x0 0x3 &ipic 22 0x8 - 0xa800 0x0 0x0 0x4 &ipic 23 0x8 - - /* IDSEL 0x16 AD22*/ - 0xb000 0x0 0x0 0x1 &ipic 23 0x8 - 0xb000 0x0 0x0 0x2 &ipic 20 0x8 - 0xb000 0x0 0x0 0x3 &ipic 21 0x8 - 0xb000 0x0 0x0 0x4 &ipic 22 0x8 - - /* IDSEL 0x17 AD23*/ - 0xb800 0x0 0x0 0x1 &ipic 22 0x8 - 0xb800 0x0 0x0 0x2 &ipic 23 0x8 - 0xb800 0x0 0x0 0x3 &ipic 20 0x8 - 0xb800 0x0 0x0 0x4 &ipic 21 0x8 - - /* IDSEL 0x18 AD24*/ - 0xc000 0x0 0x0 0x1 &ipic 21 0x8 - 0xc000 0x0 0x0 0x2 &ipic 22 0x8 - 0xc000 0x0 0x0 0x3 &ipic 23 0x8 - 0xc000 0x0 0x0 0x4 &ipic 20 0x8>; - interrupt-parent = <&ipic>; - interrupts = <66 0x8>; - bus-range = <0x0 0x0>; - ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 - 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xd0000000 0x0 0x00100000>; - clock-frequency = <0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008500 0x100 /* internal registers */ - 0xe0008300 0x8>; /* config space access registers */ - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - sleep = <&pmc 0x00010000>; - }; -}; diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index ecebc27a2898..ba7caaf98fd5 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -52,7 +52,7 @@ reg = <0xe0000000 0x00000200>; bus-frequency = <0>; - wdt@200 { + watchdog@200 { device_type = "watchdog"; compatible = "mpc83xx_wdt"; reg = <0x200 0x100>; diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index d4ebbb93de0b..13f17232ba83 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -53,7 +53,7 @@ reg = <0xe0000000 0x00000200>; bus-frequency = <0>; // from bootloader - wdt@200 { + watchdog@200 { device_type = "watchdog"; compatible = "mpc83xx_wdt"; reg = <0x200 0x100>; diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts index bcf68a0a7b55..eae0afd5abbc 100644 --- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -51,7 +51,7 @@ reg = <0xe0000000 0x00000200>; bus-frequency = <0>; // from bootloader - wdt@200 { + watchdog@200 { device_type = "watchdog"; compatible = "mpc83xx_wdt"; reg = <0x200 0x100>; diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts deleted file mode 100644 index 6c8cb859c55f..000000000000 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ /dev/null @@ -1,403 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * MPC8349E MDS Device Tree Source - * - * Copyright 2005, 2006 Freescale Semiconductor Inc. - */ - -/dts-v1/; - -/ { - model = "MPC8349EMDS"; - compatible = "MPC8349EMDS", "MPC834xMDS", "MPC83xxMDS"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8349@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <32768>; - i-cache-size = <32768>; - timebase-frequency = <0>; // from bootloader - bus-frequency = <0>; // from bootloader - clock-frequency = <0>; // from bootloader - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; // 256MB at 0 - }; - - bcsr@e2400000 { - compatible = "fsl,mpc8349mds-bcsr"; - reg = <0xe2400000 0x8000>; - }; - - soc8349@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xe0000000 0x00100000>; - reg = <0xe0000000 0x00000200>; - bus-frequency = <0>; - - wdt@200 { - device_type = "watchdog"; - compatible = "mpc83xx_wdt"; - reg = <0x200 0x100>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <14 0x8>; - interrupt-parent = <&ipic>; - dfsrr; - - rtc@68 { - compatible = "dallas,ds1374"; - reg = <0x68>; - }; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <15 0x8>; - interrupt-parent = <&ipic>; - dfsrr; - }; - - spi@7000 { - cell-index = <0>; - compatible = "fsl,spi"; - reg = <0x7000 0x1000>; - interrupts = <16 0x8>; - interrupt-parent = <&ipic>; - mode = "cpu"; - }; - - dma@82a8 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8349-dma", "fsl,elo-dma"; - reg = <0x82a8 4>; - ranges = <0 0x8100 0x1a8>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - reg = <0 0x80>; - cell-index = <0>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@80 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@100 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@180 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - reg = <0x180 0x28>; - cell-index = <3>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - }; - - /* phy type (ULPI or SERIAL) are only types supported for MPH */ - /* port = 0 or 1 */ - usb@22000 { - compatible = "fsl-usb2-mph"; - reg = <0x22000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&ipic>; - interrupts = <39 0x8>; - phy_type = "ulpi"; - port0; - }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ - usb@23000 { - compatible = "fsl-usb2-dr"; - reg = <0x23000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&ipic>; - interrupts = <38 0x8>; - dr_mode = "otg"; - phy_type = "ulpi"; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <32 0x8 33 0x8 34 0x8>; - interrupt-parent = <&ipic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - linux,network-index = <0>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&ipic>; - interrupts = <17 0x8>; - reg = <0x0>; - }; - - phy1: ethernet-phy@1 { - interrupt-parent = <&ipic>; - interrupts = <18 0x8>; - reg = <0x1>; - }; - - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 0x8 36 0x8 37 0x8>; - interrupt-parent = <&ipic>; - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - linux,network-index = <1>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <9 0x8>; - interrupt-parent = <&ipic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <10 0x8>; - interrupt-parent = <&ipic>; - }; - - crypto@30000 { - compatible = "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <11 0x8>; - interrupt-parent = <&ipic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x7e>; - fsl,descriptor-types-mask = <0x01010ebf>; - }; - - /* IPIC - * interrupts cell = <intr #, sense> - * sense values match linux IORESOURCE_IRQ_* defines: - * sense == 8: Level, low assertion - * sense == 2: Edge, high-to-low change - */ - ipic: pic@700 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x700 0x100>; - device_type = "ipic"; - }; - }; - - pci0: pci@e0008500 { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x11 */ - 0x8800 0x0 0x0 0x1 &ipic 20 0x8 - 0x8800 0x0 0x0 0x2 &ipic 21 0x8 - 0x8800 0x0 0x0 0x3 &ipic 22 0x8 - 0x8800 0x0 0x0 0x4 &ipic 23 0x8 - - /* IDSEL 0x12 */ - 0x9000 0x0 0x0 0x1 &ipic 22 0x8 - 0x9000 0x0 0x0 0x2 &ipic 23 0x8 - 0x9000 0x0 0x0 0x3 &ipic 20 0x8 - 0x9000 0x0 0x0 0x4 &ipic 21 0x8 - - /* IDSEL 0x13 */ - 0x9800 0x0 0x0 0x1 &ipic 23 0x8 - 0x9800 0x0 0x0 0x2 &ipic 20 0x8 - 0x9800 0x0 0x0 0x3 &ipic 21 0x8 - 0x9800 0x0 0x0 0x4 &ipic 22 0x8 - - /* IDSEL 0x15 */ - 0xa800 0x0 0x0 0x1 &ipic 20 0x8 - 0xa800 0x0 0x0 0x2 &ipic 21 0x8 - 0xa800 0x0 0x0 0x3 &ipic 22 0x8 - 0xa800 0x0 0x0 0x4 &ipic 23 0x8 - - /* IDSEL 0x16 */ - 0xb000 0x0 0x0 0x1 &ipic 23 0x8 - 0xb000 0x0 0x0 0x2 &ipic 20 0x8 - 0xb000 0x0 0x0 0x3 &ipic 21 0x8 - 0xb000 0x0 0x0 0x4 &ipic 22 0x8 - - /* IDSEL 0x17 */ - 0xb800 0x0 0x0 0x1 &ipic 22 0x8 - 0xb800 0x0 0x0 0x2 &ipic 23 0x8 - 0xb800 0x0 0x0 0x3 &ipic 20 0x8 - 0xb800 0x0 0x0 0x4 &ipic 21 0x8 - - /* IDSEL 0x18 */ - 0xc000 0x0 0x0 0x1 &ipic 21 0x8 - 0xc000 0x0 0x0 0x2 &ipic 22 0x8 - 0xc000 0x0 0x0 0x3 &ipic 23 0x8 - 0xc000 0x0 0x0 0x4 &ipic 20 0x8>; - interrupt-parent = <&ipic>; - interrupts = <66 0x8>; - bus-range = <0 0>; - ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 - 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008500 0x100 /* internal registers */ - 0xe0008300 0x8>; /* config space access registers */ - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; - - pci1: pci@e0008600 { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x11 */ - 0x8800 0x0 0x0 0x1 &ipic 20 0x8 - 0x8800 0x0 0x0 0x2 &ipic 21 0x8 - 0x8800 0x0 0x0 0x3 &ipic 22 0x8 - 0x8800 0x0 0x0 0x4 &ipic 23 0x8 - - /* IDSEL 0x12 */ - 0x9000 0x0 0x0 0x1 &ipic 22 0x8 - 0x9000 0x0 0x0 0x2 &ipic 23 0x8 - 0x9000 0x0 0x0 0x3 &ipic 20 0x8 - 0x9000 0x0 0x0 0x4 &ipic 21 0x8 - - /* IDSEL 0x13 */ - 0x9800 0x0 0x0 0x1 &ipic 23 0x8 - 0x9800 0x0 0x0 0x2 &ipic 20 0x8 - 0x9800 0x0 0x0 0x3 &ipic 21 0x8 - 0x9800 0x0 0x0 0x4 &ipic 22 0x8 - - /* IDSEL 0x15 */ - 0xa800 0x0 0x0 0x1 &ipic 20 0x8 - 0xa800 0x0 0x0 0x2 &ipic 21 0x8 - 0xa800 0x0 0x0 0x3 &ipic 22 0x8 - 0xa800 0x0 0x0 0x4 &ipic 23 0x8 - - /* IDSEL 0x16 */ - 0xb000 0x0 0x0 0x1 &ipic 23 0x8 - 0xb000 0x0 0x0 0x2 &ipic 20 0x8 - 0xb000 0x0 0x0 0x3 &ipic 21 0x8 - 0xb000 0x0 0x0 0x4 &ipic 22 0x8 - - /* IDSEL 0x17 */ - 0xb800 0x0 0x0 0x1 &ipic 22 0x8 - 0xb800 0x0 0x0 0x2 &ipic 23 0x8 - 0xb800 0x0 0x0 0x3 &ipic 20 0x8 - 0xb800 0x0 0x0 0x4 &ipic 21 0x8 - - /* IDSEL 0x18 */ - 0xc000 0x0 0x0 0x1 &ipic 21 0x8 - 0xc000 0x0 0x0 0x2 &ipic 22 0x8 - 0xc000 0x0 0x0 0x3 &ipic 23 0x8 - 0xc000 0x0 0x0 0x4 &ipic 20 0x8>; - interrupt-parent = <&ipic>; - interrupts = <67 0x8>; - bus-range = <0 0>; - ranges = <0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000 - 0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xe2100000 0x0 0x00100000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008600 0x100 /* internal registers */ - 0xe0008380 0x8>; /* config space access registers */ - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; -}; diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts deleted file mode 100644 index f4ca12ec57f1..000000000000 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ /dev/null @@ -1,481 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * MPC8360E EMDS Device Tree Source - * - * Copyright 2006 Freescale Semiconductor Inc. - */ - - -/* -/memreserve/ 00000000 1000000; -*/ - -/dts-v1/; - -/ { - model = "MPC8360MDS"; - compatible = "MPC8360EMDS", "MPC836xMDS", "MPC83xxMDS"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8360@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <32768>; // L1, 32K - i-cache-size = <32768>; // L1, 32K - timebase-frequency = <66000000>; - bus-frequency = <264000000>; - clock-frequency = <528000000>; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; - - localbus@e0005000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus", - "simple-bus"; - reg = <0xe0005000 0xd8>; - ranges = <0 0 0xfe000000 0x02000000 - 1 0 0xf8000000 0x00008000>; - - flash@0,0 { - compatible = "cfi-flash"; - reg = <0 0 0x2000000>; - bank-width = <2>; - device-width = <1>; - }; - - bcsr@1,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8360mds-bcsr"; - reg = <1 0 0x8000>; - ranges = <0 1 0 0x8000>; - - bcsr13: gpio-controller@d { - #gpio-cells = <2>; - compatible = "fsl,mpc8360mds-bcsr-gpio"; - reg = <0xd 1>; - gpio-controller; - }; - }; - }; - - soc8360@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xe0000000 0x00100000>; - reg = <0xe0000000 0x00000200>; - bus-frequency = <264000000>; - - wdt@200 { - device_type = "watchdog"; - compatible = "mpc83xx_wdt"; - reg = <0x200 0x100>; - }; - - pmc: power@b00 { - compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc"; - reg = <0xb00 0x100 0xa00 0x100>; - interrupts = <80 0x8>; - interrupt-parent = <&ipic>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <14 0x8>; - interrupt-parent = <&ipic>; - dfsrr; - - rtc@68 { - compatible = "dallas,ds1374"; - reg = <0x68>; - }; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <15 0x8>; - interrupt-parent = <&ipic>; - dfsrr; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <264000000>; - interrupts = <9 0x8>; - interrupt-parent = <&ipic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <264000000>; - interrupts = <10 0x8>; - interrupt-parent = <&ipic>; - }; - - dma@82a8 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8360-dma", "fsl,elo-dma"; - reg = <0x82a8 4>; - ranges = <0 0x8100 0x1a8>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; - reg = <0 0x80>; - cell-index = <0>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@80 { - compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@100 { - compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@180 { - compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; - reg = <0x180 0x28>; - cell-index = <3>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - }; - - crypto@30000 { - compatible = "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <11 0x8>; - interrupt-parent = <&ipic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x7e>; - fsl,descriptor-types-mask = <0x01010ebf>; - sleep = <&pmc 0x03000000>; - }; - - ipic: pic@700 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x700 0x100>; - device_type = "ipic"; - }; - - par_io@1400 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0x1400 0x100>; - ranges = <0 0x1400 0x100>; - device_type = "par_io"; - num-ports = <7>; - - qe_pio_b: gpio-controller@18 { - #gpio-cells = <2>; - compatible = "fsl,mpc8360-qe-pario-bank", - "fsl,mpc8323-qe-pario-bank"; - reg = <0x18 0x18>; - gpio-controller; - }; - - pio1: ucc_pin@1 { - pio-map = < - /* port pin dir open_drain assignment has_irq */ - 0 3 1 0 1 0 /* TxD0 */ - 0 4 1 0 1 0 /* TxD1 */ - 0 5 1 0 1 0 /* TxD2 */ - 0 6 1 0 1 0 /* TxD3 */ - 1 6 1 0 3 0 /* TxD4 */ - 1 7 1 0 1 0 /* TxD5 */ - 1 9 1 0 2 0 /* TxD6 */ - 1 10 1 0 2 0 /* TxD7 */ - 0 9 2 0 1 0 /* RxD0 */ - 0 10 2 0 1 0 /* RxD1 */ - 0 11 2 0 1 0 /* RxD2 */ - 0 12 2 0 1 0 /* RxD3 */ - 0 13 2 0 1 0 /* RxD4 */ - 1 1 2 0 2 0 /* RxD5 */ - 1 0 2 0 2 0 /* RxD6 */ - 1 4 2 0 2 0 /* RxD7 */ - 0 7 1 0 1 0 /* TX_EN */ - 0 8 1 0 1 0 /* TX_ER */ - 0 15 2 0 1 0 /* RX_DV */ - 0 16 2 0 1 0 /* RX_ER */ - 0 0 2 0 1 0 /* RX_CLK */ - 2 9 1 0 3 0 /* GTX_CLK - CLK10 */ - 2 8 2 0 1 0>; /* GTX125 - CLK9 */ - }; - pio2: ucc_pin@2 { - pio-map = < - /* port pin dir open_drain assignment has_irq */ - 0 17 1 0 1 0 /* TxD0 */ - 0 18 1 0 1 0 /* TxD1 */ - 0 19 1 0 1 0 /* TxD2 */ - 0 20 1 0 1 0 /* TxD3 */ - 1 2 1 0 1 0 /* TxD4 */ - 1 3 1 0 2 0 /* TxD5 */ - 1 5 1 0 3 0 /* TxD6 */ - 1 8 1 0 3 0 /* TxD7 */ - 0 23 2 0 1 0 /* RxD0 */ - 0 24 2 0 1 0 /* RxD1 */ - 0 25 2 0 1 0 /* RxD2 */ - 0 26 2 0 1 0 /* RxD3 */ - 0 27 2 0 1 0 /* RxD4 */ - 1 12 2 0 2 0 /* RxD5 */ - 1 13 2 0 3 0 /* RxD6 */ - 1 11 2 0 2 0 /* RxD7 */ - 0 21 1 0 1 0 /* TX_EN */ - 0 22 1 0 1 0 /* TX_ER */ - 0 29 2 0 1 0 /* RX_DV */ - 0 30 2 0 1 0 /* RX_ER */ - 0 31 2 0 1 0 /* RX_CLK */ - 2 2 1 0 2 0 /* GTX_CLK - CLK10 */ - 2 3 2 0 1 0 /* GTX125 - CLK4 */ - 0 1 3 0 2 0 /* MDIO */ - 0 2 1 0 1 0>; /* MDC */ - }; - - }; - }; - - qe@e0100000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "qe"; - compatible = "fsl,qe"; - ranges = <0x0 0xe0100000 0x00100000>; - reg = <0xe0100000 0x480>; - brg-frequency = <0>; - bus-frequency = <396000000>; - fsl,qe-num-riscs = <2>; - fsl,qe-num-snums = <28>; - - muram@10000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,qe-muram", "fsl,cpm-muram"; - ranges = <0x0 0x00010000 0x0000c000>; - - data-only@0 { - compatible = "fsl,qe-muram-data", - "fsl,cpm-muram-data"; - reg = <0x0 0xc000>; - }; - }; - - timer@440 { - compatible = "fsl,mpc8360-qe-gtm", - "fsl,qe-gtm", "fsl,gtm"; - reg = <0x440 0x40>; - clock-frequency = <132000000>; - interrupts = <12 13 14 15>; - interrupt-parent = <&qeic>; - }; - - spi@4c0 { - cell-index = <0>; - compatible = "fsl,spi"; - reg = <0x4c0 0x40>; - interrupts = <2>; - interrupt-parent = <&qeic>; - mode = "cpu"; - }; - - spi@500 { - cell-index = <1>; - compatible = "fsl,spi"; - reg = <0x500 0x40>; - interrupts = <1>; - interrupt-parent = <&qeic>; - mode = "cpu"; - }; - - usb@6c0 { - compatible = "fsl,mpc8360-qe-usb", - "fsl,mpc8323-qe-usb"; - reg = <0x6c0 0x40 0x8b00 0x100>; - interrupts = <11>; - interrupt-parent = <&qeic>; - fsl,fullspeed-clock = "clk21"; - fsl,lowspeed-clock = "brg9"; - gpios = <&qe_pio_b 2 0 /* USBOE */ - &qe_pio_b 3 0 /* USBTP */ - &qe_pio_b 8 0 /* USBTN */ - &qe_pio_b 9 0 /* USBRP */ - &qe_pio_b 11 0 /* USBRN */ - &bcsr13 5 0 /* SPEED */ - &bcsr13 4 1>; /* POWER */ - }; - - enet0: ucc@2000 { - device_type = "network"; - compatible = "ucc_geth"; - cell-index = <1>; - reg = <0x2000 0x200>; - interrupts = <32>; - interrupt-parent = <&qeic>; - local-mac-address = [ 00 00 00 00 00 00 ]; - rx-clock-name = "none"; - tx-clock-name = "clk9"; - phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; - pio-handle = <&pio1>; - }; - - enet1: ucc@3000 { - device_type = "network"; - compatible = "ucc_geth"; - cell-index = <2>; - reg = <0x3000 0x200>; - interrupts = <33>; - interrupt-parent = <&qeic>; - local-mac-address = [ 00 00 00 00 00 00 ]; - rx-clock-name = "none"; - tx-clock-name = "clk4"; - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - pio-handle = <&pio2>; - }; - - mdio@2120 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x2120 0x18>; - compatible = "fsl,ucc-mdio"; - - phy0: ethernet-phy@0 { - interrupt-parent = <&ipic>; - interrupts = <17 0x8>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&ipic>; - interrupts = <18 0x8>; - reg = <0x1>; - }; - tbi-phy@2 { - device_type = "tbi-phy"; - reg = <0x2>; - }; - }; - - qeic: interrupt-controller@80 { - interrupt-controller; - compatible = "fsl,qe-ic"; - #address-cells = <0>; - #interrupt-cells = <1>; - reg = <0x80 0x80>; - big-endian; - interrupts = <32 0x8 33 0x8>; // high:32 low:33 - interrupt-parent = <&ipic>; - }; - }; - - pci0: pci@e0008500 { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x11 AD17 */ - 0x8800 0x0 0x0 0x1 &ipic 20 0x8 - 0x8800 0x0 0x0 0x2 &ipic 21 0x8 - 0x8800 0x0 0x0 0x3 &ipic 22 0x8 - 0x8800 0x0 0x0 0x4 &ipic 23 0x8 - - /* IDSEL 0x12 AD18 */ - 0x9000 0x0 0x0 0x1 &ipic 22 0x8 - 0x9000 0x0 0x0 0x2 &ipic 23 0x8 - 0x9000 0x0 0x0 0x3 &ipic 20 0x8 - 0x9000 0x0 0x0 0x4 &ipic 21 0x8 - - /* IDSEL 0x13 AD19 */ - 0x9800 0x0 0x0 0x1 &ipic 23 0x8 - 0x9800 0x0 0x0 0x2 &ipic 20 0x8 - 0x9800 0x0 0x0 0x3 &ipic 21 0x8 - 0x9800 0x0 0x0 0x4 &ipic 22 0x8 - - /* IDSEL 0x15 AD21*/ - 0xa800 0x0 0x0 0x1 &ipic 20 0x8 - 0xa800 0x0 0x0 0x2 &ipic 21 0x8 - 0xa800 0x0 0x0 0x3 &ipic 22 0x8 - 0xa800 0x0 0x0 0x4 &ipic 23 0x8 - - /* IDSEL 0x16 AD22*/ - 0xb000 0x0 0x0 0x1 &ipic 23 0x8 - 0xb000 0x0 0x0 0x2 &ipic 20 0x8 - 0xb000 0x0 0x0 0x3 &ipic 21 0x8 - 0xb000 0x0 0x0 0x4 &ipic 22 0x8 - - /* IDSEL 0x17 AD23*/ - 0xb800 0x0 0x0 0x1 &ipic 22 0x8 - 0xb800 0x0 0x0 0x2 &ipic 23 0x8 - 0xb800 0x0 0x0 0x3 &ipic 20 0x8 - 0xb800 0x0 0x0 0x4 &ipic 21 0x8 - - /* IDSEL 0x18 AD24*/ - 0xc000 0x0 0x0 0x1 &ipic 21 0x8 - 0xc000 0x0 0x0 0x2 &ipic 22 0x8 - 0xc000 0x0 0x0 0x3 &ipic 23 0x8 - 0xc000 0x0 0x0 0x4 &ipic 20 0x8>; - interrupt-parent = <&ipic>; - interrupts = <66 0x8>; - bus-range = <0 0>; - ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 - 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008500 0x100 /* internal registers */ - 0xe0008300 0x8>; /* config space access registers */ - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - sleep = <&pmc 0x00010000>; - }; -}; diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts index a0cc1953484d..4ff38e1a2185 100644 --- a/arch/powerpc/boot/dts/mpc836x_rdk.dts +++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts @@ -62,7 +62,7 @@ /* filled by u-boot */ bus-frequency = <0>; - wdt@200 { + watchdog@200 { compatible = "mpc83xx_wdt"; reg = <0x200 0x100>; }; diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts deleted file mode 100644 index 9227bce0e2f5..000000000000 --- a/arch/powerpc/boot/dts/mpc8377_mds.dts +++ /dev/null @@ -1,505 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * MPC8377E MDS Device Tree Source - * - * Copyright 2007 Freescale Semiconductor Inc. - */ - -/dts-v1/; - -/ { - model = "fsl,mpc8377emds"; - compatible = "fsl,mpc8377emds","fsl,mpc837xmds"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8377@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <32768>; - i-cache-size = <32768>; - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; // 512MB at 0 - }; - - localbus@e0005000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus"; - reg = <0xe0005000 0x1000>; - interrupts = <77 0x8>; - interrupt-parent = <&ipic>; - - // booting from NOR flash - ranges = <0 0x0 0xfe000000 0x02000000 - 1 0x0 0xf8000000 0x00008000 - 3 0x0 0xe0600000 0x00008000>; - - flash@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0 0x0 0x2000000>; - bank-width = <2>; - device-width = <1>; - - u-boot@0 { - reg = <0x0 0x100000>; - read-only; - }; - - fs@100000 { - reg = <0x100000 0x800000>; - }; - - kernel@1d00000 { - reg = <0x1d00000 0x200000>; - }; - - dtb@1f00000 { - reg = <0x1f00000 0x100000>; - }; - }; - - bcsr@1,0 { - reg = <1 0x0 0x8000>; - compatible = "fsl,mpc837xmds-bcsr"; - }; - - nand@3,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8377-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <3 0x0 0x8000>; - - u-boot@0 { - reg = <0x0 0x100000>; - read-only; - }; - - kernel@100000 { - reg = <0x100000 0x300000>; - }; - - fs@400000 { - reg = <0x400000 0x1c00000>; - }; - }; - }; - - soc@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xe0000000 0x00100000>; - reg = <0xe0000000 0x00000200>; - bus-frequency = <0>; - - wdt@200 { - compatible = "mpc83xx_wdt"; - reg = <0x200 0x100>; - }; - - sleep-nexus { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - sleep = <&pmc 0x0c000000>; - ranges; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <14 0x8>; - interrupt-parent = <&ipic>; - dfsrr; - - rtc@68 { - compatible = "dallas,ds1374"; - reg = <0x68>; - interrupts = <19 0x8>; - interrupt-parent = <&ipic>; - }; - }; - - sdhci@2e000 { - compatible = "fsl,mpc8377-esdhc", "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <42 0x8>; - interrupt-parent = <&ipic>; - sdhci,wp-inverted; - /* Filled in by U-Boot */ - clock-frequency = <0>; - }; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <15 0x8>; - interrupt-parent = <&ipic>; - dfsrr; - }; - - spi@7000 { - cell-index = <0>; - compatible = "fsl,spi"; - reg = <0x7000 0x1000>; - interrupts = <16 0x8>; - interrupt-parent = <&ipic>; - mode = "cpu"; - }; - - usb@23000 { - compatible = "fsl-usb2-dr"; - reg = <0x23000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&ipic>; - interrupts = <38 0x8>; - dr_mode = "host"; - phy_type = "ulpi"; - sleep = <&pmc 0x00c00000>; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <32 0x8 33 0x8 34 0x8>; - phy-connection-type = "mii"; - interrupt-parent = <&ipic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy2>; - sleep = <&pmc 0xc0000000>; - fsl,magic-packet; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy2: ethernet-phy@2 { - interrupt-parent = <&ipic>; - interrupts = <17 0x8>; - reg = <0x2>; - }; - - phy3: ethernet-phy@3 { - interrupt-parent = <&ipic>; - interrupts = <18 0x8>; - reg = <0x3>; - }; - - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 0x8 36 0x8 37 0x8>; - phy-connection-type = "mii"; - interrupt-parent = <&ipic>; - tbi-handle = <&tbi1>; - phy-handle = <&phy3>; - sleep = <&pmc 0x30000000>; - fsl,magic-packet; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <9 0x8>; - interrupt-parent = <&ipic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <10 0x8>; - interrupt-parent = <&ipic>; - }; - - dma@82a8 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8377-dma", "fsl,elo-dma"; - reg = <0x82a8 4>; - ranges = <0 0x8100 0x1a8>; - interrupt-parent = <&ipic>; - interrupts = <0x47 8>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; - reg = <0 0x80>; - cell-index = <0>; - interrupt-parent = <&ipic>; - interrupts = <0x47 8>; - }; - dma-channel@80 { - compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&ipic>; - interrupts = <0x47 8>; - }; - dma-channel@100 { - compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&ipic>; - interrupts = <0x47 8>; - }; - dma-channel@180 { - compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; - reg = <0x180 0x28>; - cell-index = <3>; - interrupt-parent = <&ipic>; - interrupts = <0x47 8>; - }; - }; - - crypto@30000 { - compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", - "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <11 0x8>; - interrupt-parent = <&ipic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x9fe>; - fsl,descriptor-types-mask = <0x3ab0ebf>; - sleep = <&pmc 0x03000000>; - }; - - sata@18000 { - compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; - reg = <0x18000 0x1000>; - interrupts = <44 0x8>; - interrupt-parent = <&ipic>; - sleep = <&pmc 0x000000c0>; - }; - - sata@19000 { - compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; - reg = <0x19000 0x1000>; - interrupts = <45 0x8>; - interrupt-parent = <&ipic>; - sleep = <&pmc 0x00000030>; - }; - - /* IPIC - * interrupts cell = <intr #, sense> - * sense values match linux IORESOURCE_IRQ_* defines: - * sense == 8: Level, low assertion - * sense == 2: Edge, high-to-low change - */ - ipic: pic@700 { - compatible = "fsl,ipic"; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x700 0x100>; - }; - - pmc: power@b00 { - compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc"; - reg = <0xb00 0x100 0xa00 0x100>; - interrupts = <80 0x8>; - interrupt-parent = <&ipic>; - }; - }; - - pci0: pci@e0008500 { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x11 */ - 0x8800 0x0 0x0 0x1 &ipic 20 0x8 - 0x8800 0x0 0x0 0x2 &ipic 21 0x8 - 0x8800 0x0 0x0 0x3 &ipic 22 0x8 - 0x8800 0x0 0x0 0x4 &ipic 23 0x8 - - /* IDSEL 0x12 */ - 0x9000 0x0 0x0 0x1 &ipic 22 0x8 - 0x9000 0x0 0x0 0x2 &ipic 23 0x8 - 0x9000 0x0 0x0 0x3 &ipic 20 0x8 - 0x9000 0x0 0x0 0x4 &ipic 21 0x8 - - /* IDSEL 0x13 */ - 0x9800 0x0 0x0 0x1 &ipic 23 0x8 - 0x9800 0x0 0x0 0x2 &ipic 20 0x8 - 0x9800 0x0 0x0 0x3 &ipic 21 0x8 - 0x9800 0x0 0x0 0x4 &ipic 22 0x8 - - /* IDSEL 0x15 */ - 0xa800 0x0 0x0 0x1 &ipic 20 0x8 - 0xa800 0x0 0x0 0x2 &ipic 21 0x8 - 0xa800 0x0 0x0 0x3 &ipic 22 0x8 - 0xa800 0x0 0x0 0x4 &ipic 23 0x8 - - /* IDSEL 0x16 */ - 0xb000 0x0 0x0 0x1 &ipic 23 0x8 - 0xb000 0x0 0x0 0x2 &ipic 20 0x8 - 0xb000 0x0 0x0 0x3 &ipic 21 0x8 - 0xb000 0x0 0x0 0x4 &ipic 22 0x8 - - /* IDSEL 0x17 */ - 0xb800 0x0 0x0 0x1 &ipic 22 0x8 - 0xb800 0x0 0x0 0x2 &ipic 23 0x8 - 0xb800 0x0 0x0 0x3 &ipic 20 0x8 - 0xb800 0x0 0x0 0x4 &ipic 21 0x8 - - /* IDSEL 0x18 */ - 0xc000 0x0 0x0 0x1 &ipic 21 0x8 - 0xc000 0x0 0x0 0x2 &ipic 22 0x8 - 0xc000 0x0 0x0 0x3 &ipic 23 0x8 - 0xc000 0x0 0x0 0x4 &ipic 20 0x8>; - interrupt-parent = <&ipic>; - interrupts = <66 0x8>; - bus-range = <0x0 0x0>; - ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 - 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; - sleep = <&pmc 0x00010000>; - clock-frequency = <0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008500 0x100 /* internal registers */ - 0xe0008300 0x8>; /* config space access registers */ - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; - - pci1: pcie@e0009000 { - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; - reg = <0xe0009000 0x00001000>; - ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 - 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; - bus-range = <0 255>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = <0 0 0 1 &ipic 1 8 - 0 0 0 2 &ipic 1 8 - 0 0 0 3 &ipic 1 8 - 0 0 0 4 &ipic 1 8>; - sleep = <&pmc 0x00300000>; - clock-frequency = <0>; - - pcie@0 { - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - reg = <0 0 0 0 0>; - ranges = <0x02000000 0 0xa8000000 - 0x02000000 0 0xa8000000 - 0 0x10000000 - 0x01000000 0 0x00000000 - 0x01000000 0 0x00000000 - 0 0x00800000>; - }; - }; - - pci2: pcie@e000a000 { - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; - reg = <0xe000a000 0x00001000>; - ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 - 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; - bus-range = <0 255>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = <0 0 0 1 &ipic 2 8 - 0 0 0 2 &ipic 2 8 - 0 0 0 3 &ipic 2 8 - 0 0 0 4 &ipic 2 8>; - sleep = <&pmc 0x000c0000>; - clock-frequency = <0>; - - pcie@0 { - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - reg = <0 0 0 0 0>; - ranges = <0x02000000 0 0xc8000000 - 0x02000000 0 0xc8000000 - 0 0x10000000 - 0x01000000 0 0x00000000 - 0x01000000 0 0x00000000 - 0 0x00800000>; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts index 7df452efa957..f137ccb8cfde 100644 --- a/arch/powerpc/boot/dts/mpc8377_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -99,7 +99,7 @@ reg = <0xe0000000 0x00000200>; bus-frequency = <0>; - wdt@200 { + watchdog@200 { device_type = "watchdog"; compatible = "mpc83xx_wdt"; reg = <0x200 0x100>; diff --git a/arch/powerpc/boot/dts/mpc8377_wlan.dts b/arch/powerpc/boot/dts/mpc8377_wlan.dts index d8e7d40aeae4..ce254dd74dd0 100644 --- a/arch/powerpc/boot/dts/mpc8377_wlan.dts +++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts @@ -89,7 +89,7 @@ reg = <0xe0000000 0x00000200>; bus-frequency = <0>; - wdt@200 { + watchdog@200 { device_type = "watchdog"; compatible = "mpc83xx_wdt"; reg = <0x200 0x100>; diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts deleted file mode 100644 index e45b25554e8c..000000000000 --- a/arch/powerpc/boot/dts/mpc8378_mds.dts +++ /dev/null @@ -1,489 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * MPC8378E MDS Device Tree Source - * - * Copyright 2007 Freescale Semiconductor Inc. - */ - -/dts-v1/; - -/ { - model = "fsl,mpc8378emds"; - compatible = "fsl,mpc8378emds","fsl,mpc837xmds"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8378@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <32768>; - i-cache-size = <32768>; - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; // 512MB at 0 - }; - - localbus@e0005000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus"; - reg = <0xe0005000 0x1000>; - interrupts = <77 0x8>; - interrupt-parent = <&ipic>; - - // booting from NOR flash - ranges = <0 0x0 0xfe000000 0x02000000 - 1 0x0 0xf8000000 0x00008000 - 3 0x0 0xe0600000 0x00008000>; - - flash@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0 0x0 0x2000000>; - bank-width = <2>; - device-width = <1>; - - u-boot@0 { - reg = <0x0 0x100000>; - read-only; - }; - - fs@100000 { - reg = <0x100000 0x800000>; - }; - - kernel@1d00000 { - reg = <0x1d00000 0x200000>; - }; - - dtb@1f00000 { - reg = <0x1f00000 0x100000>; - }; - }; - - bcsr@1,0 { - reg = <1 0x0 0x8000>; - compatible = "fsl,mpc837xmds-bcsr"; - }; - - nand@3,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8378-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <3 0x0 0x8000>; - - u-boot@0 { - reg = <0x0 0x100000>; - read-only; - }; - - kernel@100000 { - reg = <0x100000 0x300000>; - }; - - fs@400000 { - reg = <0x400000 0x1c00000>; - }; - }; - }; - - soc@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xe0000000 0x00100000>; - reg = <0xe0000000 0x00000200>; - bus-frequency = <0>; - - wdt@200 { - compatible = "mpc83xx_wdt"; - reg = <0x200 0x100>; - }; - - sleep-nexus { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - sleep = <&pmc 0x0c000000>; - ranges; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <14 0x8>; - interrupt-parent = <&ipic>; - dfsrr; - - rtc@68 { - compatible = "dallas,ds1374"; - reg = <0x68>; - interrupts = <19 0x8>; - interrupt-parent = <&ipic>; - }; - }; - - sdhci@2e000 { - compatible = "fsl,mpc8378-esdhc", "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <42 0x8>; - interrupt-parent = <&ipic>; - sdhci,wp-inverted; - /* Filled in by U-Boot */ - clock-frequency = <0>; - }; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <15 0x8>; - interrupt-parent = <&ipic>; - dfsrr; - }; - - spi@7000 { - cell-index = <0>; - compatible = "fsl,spi"; - reg = <0x7000 0x1000>; - interrupts = <16 0x8>; - interrupt-parent = <&ipic>; - mode = "cpu"; - }; - - dma@82a8 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8378-dma", "fsl,elo-dma"; - reg = <0x82a8 4>; - ranges = <0 0x8100 0x1a8>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; - reg = <0 0x80>; - cell-index = <0>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@80 { - compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@100 { - compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@180 { - compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; - reg = <0x180 0x28>; - cell-index = <3>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - }; - - usb@23000 { - compatible = "fsl-usb2-dr"; - reg = <0x23000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&ipic>; - interrupts = <38 0x8>; - dr_mode = "host"; - phy_type = "ulpi"; - sleep = <&pmc 0x00c00000>; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <32 0x8 33 0x8 34 0x8>; - phy-connection-type = "mii"; - interrupt-parent = <&ipic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy2>; - sleep = <&pmc 0xc0000000>; - fsl,magic-packet; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy2: ethernet-phy@2 { - interrupt-parent = <&ipic>; - interrupts = <17 0x8>; - reg = <0x2>; - }; - - phy3: ethernet-phy@3 { - interrupt-parent = <&ipic>; - interrupts = <18 0x8>; - reg = <0x3>; - }; - - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 0x8 36 0x8 37 0x8>; - phy-connection-type = "mii"; - interrupt-parent = <&ipic>; - tbi-handle = <&tbi1>; - phy-handle = <&phy3>; - sleep = <&pmc 0x30000000>; - fsl,magic-packet; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <9 0x8>; - interrupt-parent = <&ipic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <10 0x8>; - interrupt-parent = <&ipic>; - }; - - crypto@30000 { - compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", - "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <11 0x8>; - interrupt-parent = <&ipic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x9fe>; - fsl,descriptor-types-mask = <0x3ab0ebf>; - sleep = <&pmc 0x03000000>; - }; - - /* IPIC - * interrupts cell = <intr #, sense> - * sense values match linux IORESOURCE_IRQ_* defines: - * sense == 8: Level, low assertion - * sense == 2: Edge, high-to-low change - */ - ipic: pic@700 { - compatible = "fsl,ipic"; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x700 0x100>; - }; - - pmc: power@b00 { - compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc"; - reg = <0xb00 0x100 0xa00 0x100>; - interrupts = <80 0x8>; - interrupt-parent = <&ipic>; - }; - }; - - pci0: pci@e0008500 { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x11 */ - 0x8800 0x0 0x0 0x1 &ipic 20 0x8 - 0x8800 0x0 0x0 0x2 &ipic 21 0x8 - 0x8800 0x0 0x0 0x3 &ipic 22 0x8 - 0x8800 0x0 0x0 0x4 &ipic 23 0x8 - - /* IDSEL 0x12 */ - 0x9000 0x0 0x0 0x1 &ipic 22 0x8 - 0x9000 0x0 0x0 0x2 &ipic 23 0x8 - 0x9000 0x0 0x0 0x3 &ipic 20 0x8 - 0x9000 0x0 0x0 0x4 &ipic 21 0x8 - - /* IDSEL 0x13 */ - 0x9800 0x0 0x0 0x1 &ipic 23 0x8 - 0x9800 0x0 0x0 0x2 &ipic 20 0x8 - 0x9800 0x0 0x0 0x3 &ipic 21 0x8 - 0x9800 0x0 0x0 0x4 &ipic 22 0x8 - - /* IDSEL 0x15 */ - 0xa800 0x0 0x0 0x1 &ipic 20 0x8 - 0xa800 0x0 0x0 0x2 &ipic 21 0x8 - 0xa800 0x0 0x0 0x3 &ipic 22 0x8 - 0xa800 0x0 0x0 0x4 &ipic 23 0x8 - - /* IDSEL 0x16 */ - 0xb000 0x0 0x0 0x1 &ipic 23 0x8 - 0xb000 0x0 0x0 0x2 &ipic 20 0x8 - 0xb000 0x0 0x0 0x3 &ipic 21 0x8 - 0xb000 0x0 0x0 0x4 &ipic 22 0x8 - - /* IDSEL 0x17 */ - 0xb800 0x0 0x0 0x1 &ipic 22 0x8 - 0xb800 0x0 0x0 0x2 &ipic 23 0x8 - 0xb800 0x0 0x0 0x3 &ipic 20 0x8 - 0xb800 0x0 0x0 0x4 &ipic 21 0x8 - - /* IDSEL 0x18 */ - 0xc000 0x0 0x0 0x1 &ipic 21 0x8 - 0xc000 0x0 0x0 0x2 &ipic 22 0x8 - 0xc000 0x0 0x0 0x3 &ipic 23 0x8 - 0xc000 0x0 0x0 0x4 &ipic 20 0x8>; - interrupt-parent = <&ipic>; - interrupts = <66 0x8>; - bus-range = <0x0 0x0>; - ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 - 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; - clock-frequency = <0>; - sleep = <&pmc 0x00010000>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008500 0x100 /* internal registers */ - 0xe0008300 0x8>; /* config space access registers */ - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; - - pci1: pcie@e0009000 { - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; - reg = <0xe0009000 0x00001000>; - ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 - 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; - bus-range = <0 255>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = <0 0 0 1 &ipic 1 8 - 0 0 0 2 &ipic 1 8 - 0 0 0 3 &ipic 1 8 - 0 0 0 4 &ipic 1 8>; - sleep = <&pmc 0x00300000>; - clock-frequency = <0>; - - pcie@0 { - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - reg = <0 0 0 0 0>; - ranges = <0x02000000 0 0xa8000000 - 0x02000000 0 0xa8000000 - 0 0x10000000 - 0x01000000 0 0x00000000 - 0x01000000 0 0x00000000 - 0 0x00800000>; - }; - }; - - pci2: pcie@e000a000 { - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; - reg = <0xe000a000 0x00001000>; - ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 - 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; - bus-range = <0 255>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = <0 0 0 1 &ipic 2 8 - 0 0 0 2 &ipic 2 8 - 0 0 0 3 &ipic 2 8 - 0 0 0 4 &ipic 2 8>; - sleep = <&pmc 0x000c0000>; - clock-frequency = <0>; - - pcie@0 { - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - reg = <0 0 0 0 0>; - ranges = <0x02000000 0 0xc8000000 - 0x02000000 0 0xc8000000 - 0 0x10000000 - 0x01000000 0 0x00000000 - 0x01000000 0 0x00000000 - 0 0x00800000>; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts index bdcfe83a561e..19e5473d4161 100644 --- a/arch/powerpc/boot/dts/mpc8378_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -99,7 +99,7 @@ reg = <0xe0000000 0x00000200>; bus-frequency = <0>; - wdt@200 { + watchdog@200 { device_type = "watchdog"; compatible = "mpc83xx_wdt"; reg = <0x200 0x100>; diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts deleted file mode 100644 index f7379a1cbb6c..000000000000 --- a/arch/powerpc/boot/dts/mpc8379_mds.dts +++ /dev/null @@ -1,455 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * MPC8379E MDS Device Tree Source - * - * Copyright 2007 Freescale Semiconductor Inc. - */ - -/dts-v1/; - -/ { - model = "fsl,mpc8379emds"; - compatible = "fsl,mpc8379emds","fsl,mpc837xmds"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8379@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <32768>; - i-cache-size = <32768>; - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; // 512MB at 0 - }; - - localbus@e0005000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus"; - reg = <0xe0005000 0x1000>; - interrupts = <77 0x8>; - interrupt-parent = <&ipic>; - - // booting from NOR flash - ranges = <0 0x0 0xfe000000 0x02000000 - 1 0x0 0xf8000000 0x00008000 - 3 0x0 0xe0600000 0x00008000>; - - flash@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0 0x0 0x2000000>; - bank-width = <2>; - device-width = <1>; - - u-boot@0 { - reg = <0x0 0x100000>; - read-only; - }; - - fs@100000 { - reg = <0x100000 0x800000>; - }; - - kernel@1d00000 { - reg = <0x1d00000 0x200000>; - }; - - dtb@1f00000 { - reg = <0x1f00000 0x100000>; - }; - }; - - bcsr@1,0 { - reg = <1 0x0 0x8000>; - compatible = "fsl,mpc837xmds-bcsr"; - }; - - nand@3,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8379-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <3 0x0 0x8000>; - - u-boot@0 { - reg = <0x0 0x100000>; - read-only; - }; - - kernel@100000 { - reg = <0x100000 0x300000>; - }; - - fs@400000 { - reg = <0x400000 0x1c00000>; - }; - }; - }; - - soc@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xe0000000 0x00100000>; - reg = <0xe0000000 0x00000200>; - bus-frequency = <0>; - - wdt@200 { - compatible = "mpc83xx_wdt"; - reg = <0x200 0x100>; - }; - - sleep-nexus { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - sleep = <&pmc 0x0c000000>; - ranges; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <14 0x8>; - interrupt-parent = <&ipic>; - dfsrr; - - rtc@68 { - compatible = "dallas,ds1374"; - reg = <0x68>; - interrupts = <19 0x8>; - interrupt-parent = <&ipic>; - }; - }; - - sdhci@2e000 { - compatible = "fsl,mpc8379-esdhc", "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <42 0x8>; - interrupt-parent = <&ipic>; - sdhci,wp-inverted; - /* Filled in by U-Boot */ - clock-frequency = <0>; - }; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <15 0x8>; - interrupt-parent = <&ipic>; - dfsrr; - }; - - spi@7000 { - cell-index = <0>; - compatible = "fsl,spi"; - reg = <0x7000 0x1000>; - interrupts = <16 0x8>; - interrupt-parent = <&ipic>; - mode = "cpu"; - }; - - dma@82a8 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8379-dma", "fsl,elo-dma"; - reg = <0x82a8 4>; - ranges = <0 0x8100 0x1a8>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel"; - reg = <0 0x80>; - cell-index = <0>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@80 { - compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@100 { - compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@180 { - compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel"; - reg = <0x180 0x28>; - cell-index = <3>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - }; - - usb@23000 { - compatible = "fsl-usb2-dr"; - reg = <0x23000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&ipic>; - interrupts = <38 0x8>; - dr_mode = "host"; - phy_type = "ulpi"; - sleep = <&pmc 0x00c00000>; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <32 0x8 33 0x8 34 0x8>; - phy-connection-type = "mii"; - interrupt-parent = <&ipic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy2>; - sleep = <&pmc 0xc0000000>; - fsl,magic-packet; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy2: ethernet-phy@2 { - interrupt-parent = <&ipic>; - interrupts = <17 0x8>; - reg = <0x2>; - }; - - phy3: ethernet-phy@3 { - interrupt-parent = <&ipic>; - interrupts = <18 0x8>; - reg = <0x3>; - }; - - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 0x8 36 0x8 37 0x8>; - phy-connection-type = "mii"; - interrupt-parent = <&ipic>; - tbi-handle = <&tbi1>; - phy-handle = <&phy3>; - sleep = <&pmc 0x30000000>; - fsl,magic-packet; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <9 0x8>; - interrupt-parent = <&ipic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <10 0x8>; - interrupt-parent = <&ipic>; - }; - - crypto@30000 { - compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", - "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <11 0x8>; - interrupt-parent = <&ipic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x9fe>; - fsl,descriptor-types-mask = <0x3ab0ebf>; - sleep = <&pmc 0x03000000>; - }; - - sata@18000 { - compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; - reg = <0x18000 0x1000>; - interrupts = <44 0x8>; - interrupt-parent = <&ipic>; - sleep = <&pmc 0x000000c0>; - }; - - sata@19000 { - compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; - reg = <0x19000 0x1000>; - interrupts = <45 0x8>; - interrupt-parent = <&ipic>; - sleep = <&pmc 0x00000030>; - }; - - sata@1a000 { - compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; - reg = <0x1a000 0x1000>; - interrupts = <46 0x8>; - interrupt-parent = <&ipic>; - sleep = <&pmc 0x0000000c>; - }; - - sata@1b000 { - compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; - reg = <0x1b000 0x1000>; - interrupts = <47 0x8>; - interrupt-parent = <&ipic>; - sleep = <&pmc 0x00000003>; - }; - - /* IPIC - * interrupts cell = <intr #, sense> - * sense values match linux IORESOURCE_IRQ_* defines: - * sense == 8: Level, low assertion - * sense == 2: Edge, high-to-low change - */ - ipic: pic@700 { - compatible = "fsl,ipic"; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x700 0x100>; - }; - - pmc: power@b00 { - compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc"; - reg = <0xb00 0x100 0xa00 0x100>; - interrupts = <80 0x8>; - interrupt-parent = <&ipic>; - }; - }; - - pci0: pci@e0008500 { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x11 */ - 0x8800 0x0 0x0 0x1 &ipic 20 0x8 - 0x8800 0x0 0x0 0x2 &ipic 21 0x8 - 0x8800 0x0 0x0 0x3 &ipic 22 0x8 - 0x8800 0x0 0x0 0x4 &ipic 23 0x8 - - /* IDSEL 0x12 */ - 0x9000 0x0 0x0 0x1 &ipic 22 0x8 - 0x9000 0x0 0x0 0x2 &ipic 23 0x8 - 0x9000 0x0 0x0 0x3 &ipic 20 0x8 - 0x9000 0x0 0x0 0x4 &ipic 21 0x8 - - /* IDSEL 0x13 */ - 0x9800 0x0 0x0 0x1 &ipic 23 0x8 - 0x9800 0x0 0x0 0x2 &ipic 20 0x8 - 0x9800 0x0 0x0 0x3 &ipic 21 0x8 - 0x9800 0x0 0x0 0x4 &ipic 22 0x8 - - /* IDSEL 0x15 */ - 0xa800 0x0 0x0 0x1 &ipic 20 0x8 - 0xa800 0x0 0x0 0x2 &ipic 21 0x8 - 0xa800 0x0 0x0 0x3 &ipic 22 0x8 - 0xa800 0x0 0x0 0x4 &ipic 23 0x8 - - /* IDSEL 0x16 */ - 0xb000 0x0 0x0 0x1 &ipic 23 0x8 - 0xb000 0x0 0x0 0x2 &ipic 20 0x8 - 0xb000 0x0 0x0 0x3 &ipic 21 0x8 - 0xb000 0x0 0x0 0x4 &ipic 22 0x8 - - /* IDSEL 0x17 */ - 0xb800 0x0 0x0 0x1 &ipic 22 0x8 - 0xb800 0x0 0x0 0x2 &ipic 23 0x8 - 0xb800 0x0 0x0 0x3 &ipic 20 0x8 - 0xb800 0x0 0x0 0x4 &ipic 21 0x8 - - /* IDSEL 0x18 */ - 0xc000 0x0 0x0 0x1 &ipic 21 0x8 - 0xc000 0x0 0x0 0x2 &ipic 22 0x8 - 0xc000 0x0 0x0 0x3 &ipic 23 0x8 - 0xc000 0x0 0x0 0x4 &ipic 20 0x8>; - interrupt-parent = <&ipic>; - interrupts = <66 0x8>; - bus-range = <0x0 0x0>; - ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 - 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; - sleep = <&pmc 0x00010000>; - clock-frequency = <0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008500 0x100 /* internal registers */ - 0xe0008300 0x8>; /* config space access registers */ - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; -}; diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts index a5f702304a35..61519acca228 100644 --- a/arch/powerpc/boot/dts/mpc8379_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -97,7 +97,7 @@ reg = <0xe0000000 0x00000200>; bus-frequency = <0>; - wdt@200 { + watchdog@200 { device_type = "watchdog"; compatible = "mpc83xx_wdt"; reg = <0x200 0x100>; diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts deleted file mode 100644 index 33bbe58c1ad0..000000000000 --- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts +++ /dev/null @@ -1,503 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * MPC8610 HPCD Device Tree Source - * - * Copyright 2007-2008 Freescale Semiconductor Inc. - */ - -/dts-v1/; - -/ { - model = "MPC8610HPCD"; - compatible = "fsl,MPC8610HPCD"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8610@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <32768>; // L1 - i-cache-size = <32768>; // L1 - sleep = <&pmc 0x00008000 0 // core - &pmc 0x00004000 0>; // timebase - timebase-frequency = <0>; // From uboot - bus-frequency = <0>; // From uboot - clock-frequency = <0>; // From uboot - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; // 512M at 0x0 - }; - - localbus@e0005000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,mpc8610-elbc", "fsl,elbc", "simple-bus"; - reg = <0xe0005000 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; - ranges = <0 0 0xf8000000 0x08000000 - 1 0 0xf0000000 0x08000000 - 2 0 0xe8400000 0x00008000 - 4 0 0xe8440000 0x00008000 - 5 0 0xe8480000 0x00008000 - 6 0 0xe84c0000 0x00008000 - 3 0 0xe8000000 0x00000020>; - sleep = <&pmc 0x08000000 0>; - - flash@0,0 { - compatible = "cfi-flash"; - reg = <0 0 0x8000000>; - bank-width = <2>; - device-width = <1>; - }; - - flash@1,0 { - compatible = "cfi-flash"; - reg = <1 0 0x8000000>; - bank-width = <2>; - device-width = <1>; - }; - - flash@2,0 { - compatible = "fsl,mpc8610-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <2 0 0x8000>; - }; - - flash@4,0 { - compatible = "fsl,mpc8610-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <4 0 0x8000>; - }; - - flash@5,0 { - compatible = "fsl,mpc8610-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <5 0 0x8000>; - }; - - flash@6,0 { - compatible = "fsl,mpc8610-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <6 0 0x8000>; - }; - - board-control@3,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,fpga-pixis"; - reg = <3 0 0x20>; - ranges = <0 3 0 0x20>; - interrupt-parent = <&mpic>; - interrupts = <8 8>; - - sdcsr_pio: gpio-controller@a { - #gpio-cells = <2>; - compatible = "fsl,fpga-pixis-gpio-bank"; - reg = <0xa 1>; - gpio-controller; - }; - }; - }; - - soc@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "soc"; - compatible = "fsl,mpc8610-immr", "simple-bus"; - ranges = <0x0 0xe0000000 0x00100000>; - bus-frequency = <0>; - - mcm-law@0 { - compatible = "fsl,mcm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <10>; - }; - - mcm@1000 { - compatible = "fsl,mpc8610-mcm", "fsl,mcm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - - cs4270:codec@4f { - compatible = "cirrus,cs4270"; - reg = <0x4f>; - /* MCLK source is a stand-alone oscillator */ - clock-frequency = <12288000>; - }; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - sleep = <&pmc 0x00000004 0>; - dfsrr; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - sleep = <&pmc 0x00000002 0>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - sleep = <&pmc 0x00000008 0>; - }; - - spi@7000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc8610-spi", "fsl,spi"; - reg = <0x7000 0x40>; - cell-index = <0>; - interrupts = <59 2>; - interrupt-parent = <&mpic>; - mode = "cpu"; - cs-gpios = <&sdcsr_pio 7 0>; - sleep = <&pmc 0x00000800 0>; - - mmc-slot@0 { - compatible = "fsl,mpc8610hpcd-mmc-slot", - "mmc-spi-slot"; - reg = <0>; - gpios = <&sdcsr_pio 0 1 /* nCD */ - &sdcsr_pio 1 0>; /* WP */ - voltage-ranges = <3300 3300>; - spi-max-frequency = <50000000>; - }; - }; - - display@2c000 { - compatible = "fsl,diu"; - reg = <0x2c000 100>; - interrupts = <72 2>; - interrupt-parent = <&mpic>; - sleep = <&pmc 0x04000000 0>; - }; - - mpic: interrupt-controller@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - msi@41600 { - compatible = "fsl,mpc8610-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8610-guts"; - reg = <0xe0000 0x1000>; - ranges = <0 0xe0000 0x1000>; - fsl,has-rstcr; - - pmc: power@70 { - compatible = "fsl,mpc8610-pmc", - "fsl,mpc8641d-pmc"; - reg = <0x70 0x20>; - }; - }; - - wdt@e4000 { - compatible = "fsl,mpc8610-wdt"; - reg = <0xe4000 0x100>; - }; - - ssi@16000 { - compatible = "fsl,mpc8610-ssi"; - cell-index = <0>; - reg = <0x16000 0x100>; - interrupt-parent = <&mpic>; - interrupts = <62 2>; - fsl,mode = "i2s-slave"; - codec-handle = <&cs4270>; - fsl,playback-dma = <&dma00>; - fsl,capture-dma = <&dma01>; - fsl,fifo-depth = <8>; - sleep = <&pmc 0 0x08000000>; - }; - - ssi@16100 { - compatible = "fsl,mpc8610-ssi"; - status = "disabled"; - cell-index = <1>; - reg = <0x16100 0x100>; - interrupt-parent = <&mpic>; - interrupts = <63 2>; - fsl,fifo-depth = <8>; - sleep = <&pmc 0 0x04000000>; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma"; - cell-index = <0>; - reg = <0x21300 0x4>; /* DMA general status register */ - ranges = <0x0 0x21100 0x200>; - sleep = <&pmc 0x00000400 0>; - - dma00: dma-channel@0 { - compatible = "fsl,mpc8610-dma-channel", - "fsl,ssi-dma-channel"; - cell-index = <0>; - reg = <0x0 0x80>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma01: dma-channel@1 { - compatible = "fsl,mpc8610-dma-channel", - "fsl,ssi-dma-channel"; - cell-index = <1>; - reg = <0x80 0x80>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@2 { - compatible = "fsl,mpc8610-dma-channel", - "fsl,eloplus-dma-channel"; - cell-index = <2>; - reg = <0x100 0x80>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@3 { - compatible = "fsl,mpc8610-dma-channel", - "fsl,eloplus-dma-channel"; - cell-index = <3>; - reg = <0x180 0x80>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - dma@c300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma"; - cell-index = <1>; - reg = <0xc300 0x4>; /* DMA general status register */ - ranges = <0x0 0xc100 0x200>; - sleep = <&pmc 0x00000200 0>; - - dma-channel@0 { - compatible = "fsl,mpc8610-dma-channel", - "fsl,eloplus-dma-channel"; - cell-index = <0>; - reg = <0x0 0x80>; - interrupt-parent = <&mpic>; - interrupts = <76 2>; - }; - dma-channel@1 { - compatible = "fsl,mpc8610-dma-channel", - "fsl,eloplus-dma-channel"; - cell-index = <1>; - reg = <0x80 0x80>; - interrupt-parent = <&mpic>; - interrupts = <77 2>; - }; - dma-channel@2 { - compatible = "fsl,mpc8610-dma-channel", - "fsl,eloplus-dma-channel"; - cell-index = <2>; - reg = <0x100 0x80>; - interrupt-parent = <&mpic>; - interrupts = <78 2>; - }; - dma-channel@3 { - compatible = "fsl,mpc8610-dma-channel", - "fsl,eloplus-dma-channel"; - cell-index = <3>; - reg = <0x180 0x80>; - interrupt-parent = <&mpic>; - interrupts = <79 2>; - }; - }; - - }; - - pci0: pci@e0008000 { - compatible = "fsl,mpc8610-pci"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008000 0x1000>; - bus-range = <0 0>; - ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xe1000000 0x0 0x00100000>; - sleep = <&pmc 0x80000000 0>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <24 2>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x11 */ - 0x8800 0 0 1 &mpic 4 1 - 0x8800 0 0 2 &mpic 5 1 - 0x8800 0 0 3 &mpic 6 1 - 0x8800 0 0 4 &mpic 7 1 - - /* IDSEL 0x12 */ - 0x9000 0 0 1 &mpic 5 1 - 0x9000 0 0 2 &mpic 6 1 - 0x9000 0 0 3 &mpic 7 1 - 0x9000 0 0 4 &mpic 4 1 - >; - }; - - pci1: pcie@e000a000 { - compatible = "fsl,mpc8641-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe000a000 0x1000>; - bus-range = <1 3>; - ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>; - sleep = <&pmc 0x40000000 0>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <26 2>; - interrupt-map-mask = <0xf800 0 0 7>; - - interrupt-map = < - /* IDSEL 0x1b */ - 0xd800 0 0 1 &mpic 2 1 - - /* IDSEL 0x1c*/ - 0xe000 0 0 1 &mpic 1 1 - 0xe000 0 0 2 &mpic 1 1 - 0xe000 0 0 3 &mpic 1 1 - 0xe000 0 0 4 &mpic 1 1 - - /* IDSEL 0x1f */ - 0xf800 0 0 1 &mpic 3 2 - 0xf800 0 0 2 &mpic 0 1 - >; - - pcie@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x02000000 0x0 0xa0000000 - 0x02000000 0x0 0xa0000000 - 0x0 0x10000000 - 0x01000000 0x0 0x00000000 - 0x01000000 0x0 0x00000000 - 0x0 0x00100000>; - uli1575@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <0x02000000 0x0 0xa0000000 - 0x02000000 0x0 0xa0000000 - 0x0 0x10000000 - 0x01000000 0x0 0x00000000 - 0x01000000 0x0 0x00000000 - 0x0 0x00100000>; - - isa@1e { - device_type = "isa"; - #size-cells = <1>; - #address-cells = <2>; - reg = <0xf000 0 0 0 0>; - ranges = <1 0 0x01000000 0 0 - 0x00001000>; - - rtc@70 { - compatible = "pnpPNP,b00"; - reg = <1 0x70 2>; - }; - }; - }; - }; - }; - - pci2: pcie@e0009000 { - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - compatible = "fsl,mpc8641-pcie"; - reg = <0xe0009000 0x00001000>; - ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000 - 0x01000000 0 0x00000000 0xe2000000 0 0x00100000>; - bus-range = <0 255>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = <0x0000 0 0 1 &mpic 4 1 - 0x0000 0 0 2 &mpic 5 1 - 0x0000 0 0 3 &mpic 6 1 - 0x0000 0 0 4 &mpic 7 1>; - interrupt-parent = <&mpic>; - interrupts = <25 2>; - sleep = <&pmc 0x20000000 0>; - clock-frequency = <33333333>; - }; -}; diff --git a/arch/powerpc/boot/dts/obs600.dts b/arch/powerpc/boot/dts/obs600.dts deleted file mode 100644 index d10b0411809b..000000000000 --- a/arch/powerpc/boot/dts/obs600.dts +++ /dev/null @@ -1,314 +0,0 @@ -/* - * Device Tree Source for PlatHome OpenBlockS 600 (405EX) - * - * Copyright 2011 Ben Herrenschmidt, IBM Corp. - * - * Based on Kilauea by: - * - * Copyright 2007-2009 DENX Software Engineering, Stefan Roese <sr@denx.de> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "PlatHome,OpenBlockS 600"; - compatible = "plathome,obs600"; - dcr-parent = <&{/cpus/cpu@0}>; - - aliases { - ethernet0 = &EMAC0; - ethernet1 = &EMAC1; - serial0 = &UART0; - serial1 = &UART1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,405EX"; - reg = <0x00000000>; - clock-frequency = <0>; /* Filled in by U-Boot */ - timebase-frequency = <0>; /* Filled in by U-Boot */ - i-cache-line-size = <32>; - d-cache-line-size = <32>; - i-cache-size = <16384>; /* 16 kB */ - d-cache-size = <16384>; /* 16 kB */ - dcr-controller; - dcr-access-method = "native"; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */ - }; - - UIC0: interrupt-controller { - compatible = "ibm,uic-405ex", "ibm,uic"; - interrupt-controller; - cell-index = <0>; - dcr-reg = <0x0c0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - }; - - UIC1: interrupt-controller1 { - compatible = "ibm,uic-405ex","ibm,uic"; - interrupt-controller; - cell-index = <1>; - dcr-reg = <0x0d0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - UIC2: interrupt-controller2 { - compatible = "ibm,uic-405ex","ibm,uic"; - interrupt-controller; - cell-index = <2>; - dcr-reg = <0x0e0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - CPM0: cpm { - compatible = "ibm,cpm"; - dcr-access-method = "native"; - dcr-reg = <0x0b0 0x003>; - unused-units = <0x00000000>; - idle-doze = <0x02000000>; - standby = <0xe3e74800>; - }; - - plb { - compatible = "ibm,plb-405ex", "ibm,plb4"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clock-frequency = <0>; /* Filled in by U-Boot */ - - SDRAM0: memory-controller { - compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2"; - dcr-reg = <0x010 0x002>; - interrupt-parent = <&UIC2>; - interrupts = <0x5 0x4 /* ECC DED Error */ - 0x6 0x4>; /* ECC SEC Error */ - }; - - CRYPTO: crypto@ef700000 { - compatible = "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto"; - reg = <0xef700000 0x80400>; - interrupt-parent = <&UIC0>; - interrupts = <0x17 0x2>; - }; - - MAL0: mcmal { - compatible = "ibm,mcmal-405ex", "ibm,mcmal2"; - dcr-reg = <0x180 0x062>; - num-tx-chans = <2>; - num-rx-chans = <2>; - interrupt-parent = <&MAL0>; - interrupts = <0x0 0x1 0x2 0x3 0x4>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 - /*RXEOB*/ 0x1 &UIC0 0xb 0x4 - /*SERR*/ 0x2 &UIC1 0x0 0x4 - /*TXDE*/ 0x3 &UIC1 0x1 0x4 - /*RXDE*/ 0x4 &UIC1 0x2 0x4>; - interrupt-map-mask = <0xffffffff>; - }; - - POB0: opb { - compatible = "ibm,opb-405ex", "ibm,opb"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x80000000 0x80000000 0x10000000 - 0xef600000 0xef600000 0x00a00000 - 0xf0000000 0xf0000000 0x10000000>; - dcr-reg = <0x0a0 0x005>; - clock-frequency = <0>; /* Filled in by U-Boot */ - - EBC0: ebc { - compatible = "ibm,ebc-405ex", "ibm,ebc"; - dcr-reg = <0x012 0x002>; - #address-cells = <2>; - #size-cells = <1>; - clock-frequency = <0>; /* Filled in by U-Boot */ - /* ranges property is supplied by U-Boot */ - interrupts = <0x5 0x1>; - interrupt-parent = <&UIC1>; - - nor_flash@0,0 { - compatible = "amd,s29gl512n", "cfi-flash"; - bank-width = <2>; - reg = <0x00000000 0x00000000 0x08000000>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "kernel + initrd"; - reg = <0x00000000 0x03de0000>; - }; - partition@3de0000 { - label = "user config area"; - reg = <0x03de0000 0x00080000>; - }; - partition@3e60000 { - label = "user program area"; - reg = <0x03e60000 0x04000000>; - }; - partition@7e60000 { - label = "flat device tree"; - reg = <0x07e60000 0x00080000>; - }; - partition@7ee0000 { - label = "test program"; - reg = <0x07ee0000 0x00080000>; - }; - partition@7f60000 { - label = "u-boot env"; - reg = <0x07f60000 0x00040000>; - }; - partition@7fa0000 { - label = "u-boot"; - reg = <0x07fa0000 0x00060000>; - }; - }; - }; - - UART0: serial@ef600200 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600200 0x00000008>; - virtual-reg = <0xef600200>; - clock-frequency = <0>; /* Filled in by U-Boot */ - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <0x1a 0x4>; - }; - - UART1: serial@ef600300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600300 0x00000008>; - virtual-reg = <0xef600300>; - clock-frequency = <0>; /* Filled in by U-Boot */ - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <0x1 0x4>; - }; - - IIC0: i2c@ef600400 { - compatible = "ibm,iic-405ex", "ibm,iic"; - reg = <0xef600400 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x2 0x4>; - #address-cells = <1>; - #size-cells = <0>; - - rtc@68 { - compatible = "dallas,ds1340"; - reg = <0x68>; - }; - }; - - IIC1: i2c@ef600500 { - compatible = "ibm,iic-405ex", "ibm,iic"; - reg = <0xef600500 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x7 0x4>; - }; - - RGMII0: emac-rgmii@ef600b00 { - compatible = "ibm,rgmii-405ex", "ibm,rgmii"; - reg = <0xef600b00 0x00000104>; - has-mdio; - }; - - EMAC0: ethernet@ef600900 { - linux,network-index = <0x0>; - device_type = "network"; - compatible = "ibm,emac-405ex", "ibm,emac4sync"; - interrupt-parent = <&EMAC0>; - interrupts = <0x0 0x1>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4 - /*Wake*/ 0x1 &UIC1 0x1d 0x4>; - reg = <0xef600900 0x000000c4>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <0>; - mal-rx-channel = <0>; - cell-index = <0>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - rx-fifo-size-gige = <16384>; - tx-fifo-size-gige = <16384>; - phy-mode = "rgmii"; - phy-map = <0x00000000>; - rgmii-device = <&RGMII0>; - rgmii-channel = <0>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; - - EMAC1: ethernet@ef600a00 { - linux,network-index = <0x1>; - device_type = "network"; - compatible = "ibm,emac-405ex", "ibm,emac4sync"; - interrupt-parent = <&EMAC1>; - interrupts = <0x0 0x1>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4 - /*Wake*/ 0x1 &UIC1 0x1f 0x4>; - reg = <0xef600a00 0x000000c4>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <1>; - mal-rx-channel = <1>; - cell-index = <1>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - rx-fifo-size-gige = <16384>; - tx-fifo-size-gige = <16384>; - phy-mode = "rgmii"; - phy-map = <0x00000000>; - rgmii-device = <&RGMII0>; - rgmii-channel = <1>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; - - GPIO: gpio@ef600800 { - device_type = "gpio"; - compatible = "ibm,gpio-405ex", "ibm,ppc4xx-gpio"; - reg = <0xef600800 0x50>; - }; - }; - }; - chosen { - stdout-path = "/plb/opb/serial@ef600200"; - }; -}; diff --git a/arch/powerpc/boot/dts/pq2fads.dts b/arch/powerpc/boot/dts/pq2fads.dts deleted file mode 100644 index b6666215ed63..000000000000 --- a/arch/powerpc/boot/dts/pq2fads.dts +++ /dev/null @@ -1,243 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Device Tree for the PQ2FADS-ZU board with an MPC8280 chip. - * - * Copyright 2007,2008 Freescale Semiconductor Inc. - */ - -/dts-v1/; - -/ { - model = "pq2fads"; - compatible = "fsl,pq2fads"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <16384>; - i-cache-size = <16384>; - timebase-frequency = <0>; - clock-frequency = <0>; - }; - }; - - memory { - device_type = "memory"; - reg = <0x0 0x0>; - }; - - localbus@f0010100 { - compatible = "fsl,mpc8280-localbus", - "fsl,pq2-localbus"; - #address-cells = <2>; - #size-cells = <1>; - reg = <0xf0010100 0x60>; - - ranges = <0x0 0x0 0xff800000 0x800000 - 0x1 0x0 0xf4500000 0x8000 - 0x8 0x0 0xf8200000 0x8000>; - - flash@0,0 { - compatible = "jedec-flash"; - reg = <0x0 0x0 0x800000>; - bank-width = <4>; - device-width = <1>; - }; - - bcsr@1,0 { - reg = <0x1 0x0 0x20>; - compatible = "fsl,pq2fads-bcsr"; - }; - - PCI_PIC: pic@8,0 { - #interrupt-cells = <1>; - interrupt-controller; - reg = <0x8 0x0 0x8>; - compatible = "fsl,pq2ads-pci-pic"; - interrupt-parent = <&PIC>; - interrupts = <24 8>; - }; - }; - - pci0: pci@f0010800 { - device_type = "pci"; - reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>; - compatible = "fsl,mpc8280-pci", "fsl,pq2-pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - clock-frequency = <66000000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x16 */ - 0xb000 0x0 0x0 0x1 &PCI_PIC 0 - 0xb000 0x0 0x0 0x2 &PCI_PIC 1 - 0xb000 0x0 0x0 0x3 &PCI_PIC 2 - 0xb000 0x0 0x0 0x4 &PCI_PIC 3 - - /* IDSEL 0x17 */ - 0xb800 0x0 0x0 0x1 &PCI_PIC 4 - 0xb800 0x0 0x0 0x2 &PCI_PIC 5 - 0xb800 0x0 0x0 0x3 &PCI_PIC 6 - 0xb800 0x0 0x0 0x4 &PCI_PIC 7 - - /* IDSEL 0x18 */ - 0xc000 0x0 0x0 0x1 &PCI_PIC 8 - 0xc000 0x0 0x0 0x2 &PCI_PIC 9 - 0xc000 0x0 0x0 0x3 &PCI_PIC 10 - 0xc000 0x0 0x0 0x4 &PCI_PIC 11>; - - interrupt-parent = <&PIC>; - interrupts = <18 8>; - ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000 - 0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>; - }; - - soc@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "fsl,mpc8280", "fsl,pq2-soc"; - ranges = <0x0 0xf0000000 0x53000>; - - // Temporary -- will go away once kernel uses ranges for get_immrbase(). - reg = <0xf0000000 0x53000>; - - cpm@119c0 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - compatible = "fsl,mpc8280-cpm", "fsl,cpm2"; - reg = <0x119c0 0x30>; - ranges; - - muram@0 { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x10000>; - - data@0 { - compatible = "fsl,cpm-muram-data"; - reg = <0x0 0x2000 0x9800 0x800>; - }; - }; - - brg@119f0 { - compatible = "fsl,mpc8280-brg", - "fsl,cpm2-brg", - "fsl,cpm-brg"; - reg = <0x119f0 0x10 0x115f0 0x10>; - }; - - serial0: serial@11a00 { - device_type = "serial"; - compatible = "fsl,mpc8280-scc-uart", - "fsl,cpm2-scc-uart"; - reg = <0x11a00 0x20 0x8000 0x100>; - interrupts = <40 8>; - interrupt-parent = <&PIC>; - fsl,cpm-brg = <1>; - fsl,cpm-command = <0x800000>; - }; - - serial1: serial@11a20 { - device_type = "serial"; - compatible = "fsl,mpc8280-scc-uart", - "fsl,cpm2-scc-uart"; - reg = <0x11a20 0x20 0x8100 0x100>; - interrupts = <41 8>; - interrupt-parent = <&PIC>; - fsl,cpm-brg = <2>; - fsl,cpm-command = <0x4a00000>; - }; - - enet0: ethernet@11320 { - device_type = "network"; - compatible = "fsl,mpc8280-fcc-enet", - "fsl,cpm2-fcc-enet"; - reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>; - interrupts = <33 8>; - interrupt-parent = <&PIC>; - phy-handle = <&PHY0>; - linux,network-index = <0>; - fsl,cpm-command = <0x16200300>; - }; - - enet1: ethernet@11340 { - device_type = "network"; - compatible = "fsl,mpc8280-fcc-enet", - "fsl,cpm2-fcc-enet"; - reg = <0x11340 0x20 0x8600 0x100 0x113d0 0x1>; - interrupts = <34 8>; - interrupt-parent = <&PIC>; - phy-handle = <&PHY1>; - linux,network-index = <1>; - fsl,cpm-command = <0x1a400300>; - local-mac-address = [00 e0 0c 00 79 01]; - }; - - mdio@10d40 { - compatible = "fsl,pq2fads-mdio-bitbang", - "fsl,mpc8280-mdio-bitbang", - "fsl,cpm2-mdio-bitbang"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10d40 0x14>; - fsl,mdio-pin = <9>; - fsl,mdc-pin = <10>; - - PHY0: ethernet-phy@0 { - interrupt-parent = <&PIC>; - interrupts = <25 2>; - reg = <0x0>; - }; - - PHY1: ethernet-phy@1 { - interrupt-parent = <&PIC>; - interrupts = <25 2>; - reg = <0x3>; - }; - }; - - usb@11b60 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc8280-usb", - "fsl,cpm2-usb"; - reg = <0x11b60 0x18 0x8b00 0x100>; - interrupt-parent = <&PIC>; - interrupts = <11 8>; - fsl,cpm-command = <0x2e600000>; - }; - }; - - PIC: interrupt-controller@10c00 { - #interrupt-cells = <2>; - interrupt-controller; - reg = <0x10c00 0x80>; - compatible = "fsl,mpc8280-pic", "fsl,cpm2-pic"; - }; - - }; - - chosen { - stdout-path = "/soc/cpm/serial@11a00"; - }; -}; diff --git a/arch/powerpc/boot/dts/turris1x.dts b/arch/powerpc/boot/dts/turris1x.dts index 045af668e928..dff1ea074d9d 100644 --- a/arch/powerpc/boot/dts/turris1x.dts +++ b/arch/powerpc/boot/dts/turris1x.dts @@ -15,7 +15,7 @@ / { model = "Turris 1.x"; - compatible = "cznic,turris1x", "fsl,P2020RDB-PC"; /* fsl,P2020RDB-PC is required for booting Linux */ + compatible = "cznic,turris1x"; aliases { ethernet0 = &enet0; @@ -69,6 +69,20 @@ interrupt-parent = <&gpio>; interrupts = <12 IRQ_TYPE_LEVEL_LOW>, /* GPIO12 - ALERT pin */ <13 IRQ_TYPE_LEVEL_LOW>; /* GPIO13 - CRIT pin */ + #address-cells = <1>; + #size-cells = <0>; + + /* Local temperature sensor (SA56004ED internal) */ + channel@0 { + reg = <0>; + label = "board"; + }; + + /* Remote temperature sensor (D+/D- connected to P2020 CPU Temperature Diode) */ + channel@1 { + reg = <1>; + label = "cpu"; + }; }; /* DDR3 SPD/EEPROM */ @@ -353,11 +367,34 @@ }; reboot@d { + /* + * CPLD firmware which manages system reset and + * watchdog registers has bugs. It does not + * autoclear system reset register after change + * and watchdog ignores reset line on immediate + * succeeding reset cycle triggered by watchdog. + * These bugs have to be workarounded in U-Boot + * bootloader. So use system reset via syscon as + * a last resort because older U-Boot versions + * do not have workaround for watchdog. + * + * Reset method via rstcr's global-utilities + * (the preferred one) has priority level 128, + * watchdog has priority level 0 and default + * syscon-reboot priority level is 192. + * + * So define syscon-reboot with custom priority + * level 64 (between rstcr and watchdog) because + * rstcr should stay as default preferred reset + * method and reset via watchdog is more broken + * than system reset via syscon. + */ compatible = "syscon-reboot"; reg = <0x0d 0x01>; offset = <0x0d>; mask = <0x01>; value = <0x01>; + priority = <64>; }; led-controller@13 { @@ -439,12 +476,12 @@ * channel 1 (but only USB 2.0 subset) to USB 2.0 pins on mPCIe * slot 1 (CN5), channels 2 and 3 to connector P600. * - * P2020 PCIe Root Port uses 1MB of PCIe MEM and xHCI controller + * P2020 PCIe Root Port does not use PCIe MEM and xHCI controller * uses 64kB + 8kB of PCIe MEM. No PCIe IO is used or required. - * So allocate 2MB of PCIe MEM for this PCIe bus. + * So allocate 128kB of PCIe MEM for this PCIe bus. */ reg = <0 0xffe08000 0 0x1000>; - ranges = <0x02000000 0x0 0xc0000000 0 0xc0000000 0x0 0x00200000>, /* MEM */ + ranges = <0x02000000 0x0 0xc0000000 0 0xc0000000 0x0 0x00020000>, /* MEM */ <0x01000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>; /* IO */ pcie@0 { diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts index b4f32740870e..aa62d08e97c2 100644 --- a/arch/powerpc/boot/dts/warp.dts +++ b/arch/powerpc/boot/dts/warp.dts @@ -258,14 +258,12 @@ }; power-leds { - compatible = "gpio-leds"; + compatible = "warp-power-leds"; green { gpios = <&GPIO1 0 0>; - default-state = "keep"; }; red { gpios = <&GPIO1 1 0>; - default-state = "keep"; }; }; diff --git a/arch/powerpc/boot/install.sh b/arch/powerpc/boot/install.sh index 461902c8a46d..c3df6c27ce75 100755 --- a/arch/powerpc/boot/install.sh +++ b/arch/powerpc/boot/install.sh @@ -19,15 +19,19 @@ set -e # this should work for both the pSeries zImage and the iSeries vmlinux.sm -image_name=`basename $2` +image_name=$(basename "$2") -if [ -f $4/$image_name ]; then - mv $4/$image_name $4/$image_name.old + +echo "Warning: '${INSTALLKERNEL}' command not available... Copying" \ + "directly to $4/$image_name-$1" >&2 + +if [ -f "$4"/"$image_name"-"$1" ]; then + mv "$4"/"$image_name"-"$1" "$4"/"$image_name"-"$1".old fi -if [ -f $4/System.map ]; then - mv $4/System.map $4/System.old +if [ -f "$4"/System.map-"$1" ]; then + mv "$4"/System.map-"$1" "$4"/System-"$1".old fi -cat $2 > $4/$image_name -cp $3 $4/System.map +cat "$2" > "$4"/"$image_name"-"$1" +cp "$3" "$4"/System.map-"$1" diff --git a/arch/powerpc/boot/main.c b/arch/powerpc/boot/main.c index cae31a6e8f02..2c0e2a1cab01 100644 --- a/arch/powerpc/boot/main.c +++ b/arch/powerpc/boot/main.c @@ -188,7 +188,7 @@ static inline void prep_esm_blob(struct addr_range vmlinux, void *chosen) { } /* A buffer that may be edited by tools operating on a zImage binary so as to * edit the command line passed to vmlinux (by setting /chosen/bootargs). - * The buffer is put in it's own section so that tools may locate it easier. + * The buffer is put in its own section so that tools may locate it easier. */ static char cmdline[BOOT_COMMAND_LINE_SIZE] __attribute__((__section__("__builtin_cmdline"))); diff --git a/arch/powerpc/boot/page.h b/arch/powerpc/boot/page.h index c3d55fc8f34c..e44a3119720d 100644 --- a/arch/powerpc/boot/page.h +++ b/arch/powerpc/boot/page.h @@ -5,7 +5,7 @@ * Copyright (C) 2001 PPC64 Team, IBM Corp */ -#ifdef __ASSEMBLY__ +#ifdef __ASSEMBLER__ #define ASM_CONST(x) x #else #define __ASM_CONST(x) x##UL diff --git a/arch/powerpc/boot/ppcboot-hotfoot.h b/arch/powerpc/boot/ppcboot-hotfoot.h deleted file mode 100644 index 4728db95f58a..000000000000 --- a/arch/powerpc/boot/ppcboot-hotfoot.h +++ /dev/null @@ -1,119 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * This interface is used for compatibility with old U-boots *ONLY*. - * Please do not imitate or extend this. - */ - -/* - * Unfortunately, the ESTeem Hotfoot board uses a mangled version of - * ppcboot.h for historical reasons, and in the interest of having a - * mainline kernel boot on the production board+bootloader, this was the - * least-offensive solution. Please direct all flames to: - * - * Solomon Peachy <solomon@linux-wlan.com> - * - * (This header is identical to ppcboot.h except for the - * TARGET_HOTFOOT bits) - */ - -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - */ - -#ifndef __PPCBOOT_H__ -#define __PPCBOOT_H__ - -/* - * Board information passed to kernel from PPCBoot - * - * include/asm-ppc/ppcboot.h - */ - -#include "types.h" - -typedef struct bd_info { - unsigned long bi_memstart; /* start of DRAM memory */ - unsigned long bi_memsize; /* size of DRAM memory in bytes */ - unsigned long bi_flashstart; /* start of FLASH memory */ - unsigned long bi_flashsize; /* size of FLASH memory */ - unsigned long bi_flashoffset; /* reserved area for startup monitor */ - unsigned long bi_sramstart; /* start of SRAM memory */ - unsigned long bi_sramsize; /* size of SRAM memory */ -#if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\ - defined(TARGET_83xx) - unsigned long bi_immr_base; /* base of IMMR register */ -#endif -#if defined(TARGET_PPC_MPC52xx) - unsigned long bi_mbar_base; /* base of internal registers */ -#endif - unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */ - unsigned long bi_ip_addr; /* IP Address */ - unsigned char bi_enetaddr[6]; /* Ethernet address */ -#if defined(TARGET_HOTFOOT) - /* second onboard ethernet port */ - unsigned char bi_enet1addr[6]; -#define HAVE_ENET1ADDR -#endif /* TARGET_HOOTFOOT */ - unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ - unsigned long bi_intfreq; /* Internal Freq, in MHz */ - unsigned long bi_busfreq; /* Bus Freq, in MHz */ -#if defined(TARGET_CPM2) - unsigned long bi_cpmfreq; /* CPM_CLK Freq, in MHz */ - unsigned long bi_brgfreq; /* BRG_CLK Freq, in MHz */ - unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */ - unsigned long bi_vco; /* VCO Out from PLL, in MHz */ -#endif -#if defined(TARGET_PPC_MPC52xx) - unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */ - unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */ -#endif - unsigned long bi_baudrate; /* Console Baudrate */ -#if defined(TARGET_4xx) - unsigned char bi_s_version[4]; /* Version of this structure */ - unsigned char bi_r_version[32]; /* Version of the ROM (IBM) */ - unsigned int bi_procfreq; /* CPU (Internal) Freq, in Hz */ - unsigned int bi_plb_busfreq; /* PLB Bus speed, in Hz */ - unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ - unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ -#endif -#if defined(TARGET_HOTFOOT) - unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */ -#endif -#if defined(TARGET_HYMOD) - hymod_conf_t bi_hymod_conf; /* hymod configuration information */ -#endif -#if defined(TARGET_EVB64260) || defined(TARGET_405EP) || defined(TARGET_44x) || \ - defined(TARGET_85xx) || defined(TARGET_83xx) || defined(TARGET_HAS_ETH1) - /* second onboard ethernet port */ - unsigned char bi_enet1addr[6]; -#define HAVE_ENET1ADDR -#endif -#if defined(TARGET_EVB64260) || defined(TARGET_440GX) || \ - defined(TARGET_85xx) || defined(TARGET_HAS_ETH2) - /* third onboard ethernet ports */ - unsigned char bi_enet2addr[6]; -#define HAVE_ENET2ADDR -#endif -#if defined(TARGET_440GX) || defined(TARGET_HAS_ETH3) - /* fourth onboard ethernet ports */ - unsigned char bi_enet3addr[6]; -#define HAVE_ENET3ADDR -#endif -#if defined(TARGET_HOTFOOT) - int bi_phynum[2]; /* Determines phy mapping */ - int bi_phymode[2]; /* Determines phy mode */ -#endif -#if defined(TARGET_4xx) - unsigned int bi_opbfreq; /* OB clock in Hz */ - int bi_iic_fast[2]; /* Use fast i2c mode */ -#endif -#if defined(TARGET_440GX) - int bi_phynum[4]; /* phy mapping */ - int bi_phymode[4]; /* phy mode */ -#endif -} bd_t; - -#define bi_tbfreq bi_intfreq - -#endif /* __PPCBOOT_H__ */ diff --git a/arch/powerpc/boot/ppcboot.h b/arch/powerpc/boot/ppcboot.h index a78b0b257698..90c8f452fe6e 100644 --- a/arch/powerpc/boot/ppcboot.h +++ b/arch/powerpc/boot/ppcboot.h @@ -63,7 +63,7 @@ typedef struct bd_info { #if defined(TARGET_HYMOD) hymod_conf_t bi_hymod_conf; /* hymod configuration information */ #endif -#if defined(TARGET_EVB64260) || defined(TARGET_405EP) || defined(TARGET_44x) || \ +#if defined(TARGET_EVB64260) || defined(TARGET_44x) || \ defined(TARGET_85xx) || defined(TARGET_83xx) || defined(TARGET_HAS_ETH1) /* second onboard ethernet port */ unsigned char bi_enet1addr[6]; diff --git a/arch/powerpc/boot/ps3.c b/arch/powerpc/boot/ps3.c index f157717ae814..89ff46b8b225 100644 --- a/arch/powerpc/boot/ps3.c +++ b/arch/powerpc/boot/ps3.c @@ -25,7 +25,7 @@ BSS_STACK(4096); /* A buffer that may be edited by tools operating on a zImage binary so as to * edit the command line passed to vmlinux (by setting /chosen/bootargs). - * The buffer is put in it's own section so that tools may locate it easier. + * The buffer is put in its own section so that tools may locate it easier. */ static char cmdline[BOOT_COMMAND_LINE_SIZE] diff --git a/arch/powerpc/boot/rs6000.h b/arch/powerpc/boot/rs6000.h index a9d879155ef9..16df8f3c43f1 100644 --- a/arch/powerpc/boot/rs6000.h +++ b/arch/powerpc/boot/rs6000.h @@ -1,11 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* IBM RS/6000 "XCOFF" file definitions for BFD. Copyright (C) 1990, 1991 Free Software Foundation, Inc. - FIXME: Can someone provide a transliteration of this name into ASCII? - Using the following chars caused a compiler warning on HIUX (so I replaced - them with octal escapes), and isn't useful without an understanding of what - character set it is. - Written by Mimi Ph\373\364ng-Th\345o V\365 of IBM + Written by Mimi Phuong-Thao Vo of IBM and John Gilmore of Cygnus Support. */ /********************** FILE HEADER **********************/ diff --git a/arch/powerpc/boot/simple_alloc.c b/arch/powerpc/boot/simple_alloc.c index 267d6524caac..d07796fdf91a 100644 --- a/arch/powerpc/boot/simple_alloc.c +++ b/arch/powerpc/boot/simple_alloc.c @@ -112,8 +112,11 @@ static void *simple_realloc(void *ptr, unsigned long size) return ptr; new = simple_malloc(size); - memcpy(new, ptr, p->size); - simple_free(ptr); + if (new) { + memcpy(new, ptr, p->size); + simple_free(ptr); + } + return new; } diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index 5bdd4dd20bbb..1efd1206fcab 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -21,7 +21,7 @@ # (default ./arch/powerpc/boot) # -W dir specify working directory for temporary files (default .) # -z use gzip (legacy) -# -Z zsuffix compression to use (gz, xz or none) +# -Z zsuffix compression to use (gz, xz, lzma, lzo or none) # Stop execution if any command fails set -e @@ -69,7 +69,7 @@ usage() { echo 'Usage: wrapper [-o output] [-p platform] [-i initrd]' >&2 echo ' [-d devtree] [-s tree.dts] [-e esm_blob]' >&2 echo ' [-c] [-C cross-prefix] [-D datadir] [-W workingdir]' >&2 - echo ' [-Z (gz|xz|none)] [--no-compression] [vmlinux]' >&2 + echo ' [-Z (gz|xz|lzma|lzo|none)] [--no-compression] [vmlinux]' >&2 exit 1 } @@ -210,17 +210,28 @@ ld_version() gsub(".*version ", ""); gsub("-.*", ""); split($1,a, "."); + if( length(a[3]) == "8" ) + # a[3] is probably a date of format yyyymmdd used for release snapshots. We + # can assume it to be zero as it does not signify a new version as such. + a[3] = 0; print a[1]*100000000 + a[2]*1000000 + a[3]*10000; exit }' } +ld_is_lld() +{ + ${CROSS}ld -V 2>&1 | grep -q LLD +} + # Do not include PT_INTERP segment when linking pie. Non-pie linking # just ignores this option. -LD_VERSION=$(${CROSS}ld --version | ld_version) -LD_NO_DL_MIN_VERSION=$(echo 2.26 | ld_version) -if [ "$LD_VERSION" -ge "$LD_NO_DL_MIN_VERSION" ] ; then - nodl="--no-dynamic-linker" +nodl="--no-dynamic-linker" + +# suppress some warnings in recent ld versions +nowarn="-z noexecstack" +if "${CROSS}ld" -v --no-warn-rwx-segments >/dev/null 2>&1; then + nowarn="$nowarn --no-warn-rwx-segments" fi platformo=$object/"$platform".o @@ -254,11 +265,6 @@ pseries) fi make_space=n ;; -maple) - platformo="$object/of.o $object/epapr.o" - link_address='0x400000' - make_space=n - ;; pmac|chrp) platformo="$object/of.o $object/epapr.o" make_space=n @@ -320,7 +326,7 @@ ps3) make_space=n pie= ;; -ep88xc|ep405|ep8248e) +ep88xc|ep8248e) platformo="$object/fixed-head.o $object/$platform.o" binary=y ;; @@ -451,26 +457,6 @@ uboot) fi exit 0 ;; -uboot-obs600) - rm -f "$ofile" - # obs600 wants a multi image with an initrd, so we need to put a fake - # one in even when building a "normal" image. - if [ -n "$initrd" ]; then - real_rd="$initrd" - else - real_rd=`mktemp` - echo "\0" >>"$real_rd" - fi - ${MKIMAGE} -A ppc -O linux -T multi -C gzip -a $membase -e $membase \ - $uboot_version -d "$vmz":"$real_rd":"$dtb" "$ofile" - if [ -z "$initrd" ]; then - rm -f "$real_rd" - fi - if [ -z "$cacheit" ]; then - rm -f "$vmz" - fi - exit 0 - ;; esac addsec() { @@ -504,7 +490,7 @@ if [ "$platform" != "miboot" ]; then text_start="-Ttext $link_address" fi #link everything - ${CROSS}ld -m $format -T $lds $text_start $pie $nodl $rodynamic $notext -o "$ofile" $map \ + ${CROSS}ld -m $format -T $lds $text_start $pie $nodl $nowarn $rodynamic $notext -o "$ofile" $map \ $platformo $tmp $object/wrapper.a rm $tmp fi @@ -520,7 +506,7 @@ fi # post-processing needed for some platforms case "$platform" in -pseries|chrp|maple) +pseries|chrp) $objbin/addnote "$ofile" ;; coff) @@ -581,7 +567,7 @@ ps3) # reached, then enter the system reset vector of the partially decompressed # image. No warning is issued. rm -f "$odir"/{otheros,otheros-too-big}.bld - size=$(${CROSS}nm --no-sort --radix=d "$ofile" | egrep ' _end$' | cut -d' ' -f1) + size=$(${CROSS}nm --no-sort --radix=d "$ofile" | grep -E ' _end$' | cut -d' ' -f1) bld="otheros.bld" if [ $size -gt $((0x1000000)) ]; then bld="otheros-too-big.bld" diff --git a/arch/powerpc/boot/xz_config.h b/arch/powerpc/boot/xz_config.h index ebfadd39e192..9506a96ebbcc 100644 --- a/arch/powerpc/boot/xz_config.h +++ b/arch/powerpc/boot/xz_config.h @@ -50,11 +50,8 @@ static inline void put_unaligned_be32(u32 val, void *p) /* prevent the inclusion of the xz-preboot MM headers */ #define DECOMPR_MM_H #define memmove memmove -#define XZ_EXTERN static /* xz.h needs to be included directly since we need enum xz_mode */ #include "../../../include/linux/xz.h" -#undef XZ_EXTERN - #endif |