diff options
Diffstat (limited to 'arch/powerpc/kernel/head_8xx.S')
| -rw-r--r-- | arch/powerpc/kernel/head_8xx.S | 1114 |
1 files changed, 462 insertions, 652 deletions
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S index b2a5860accfb..393e19ee1322 100644 --- a/arch/powerpc/kernel/head_8xx.S +++ b/arch/powerpc/kernel/head_8xx.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * PowerPC version * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) @@ -11,38 +12,40 @@ * * This file contains low-level support and setup for PowerPC 8xx * embedded processors, including trap and interrupt dispatch. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * */ #include <linux/init.h> +#include <linux/magic.h> +#include <linux/pgtable.h> +#include <linux/sizes.h> +#include <linux/linkage.h> + #include <asm/processor.h> #include <asm/page.h> #include <asm/mmu.h> #include <asm/cache.h> -#include <asm/pgtable.h> #include <asm/cputable.h> #include <asm/thread_info.h> #include <asm/ppc_asm.h> #include <asm/asm-offsets.h> #include <asm/ptrace.h> +#include <asm/code-patching-asm.h> +#include <asm/interrupt.h> + +/* + * Value for the bits that have fixed value in RPN entries. + * Also used for tagging DAR for DTLBerror. + */ +#define RPN_PATTERN 0x00f0 + +#include "head_32.h" + +#define PAGE_SHIFT_512K 19 +#define PAGE_SHIFT_8M 23 -/* Macro to make the code more readable. */ -#ifdef CONFIG_8xx_CPU6 -#define DO_8xx_CPU6(val, reg) \ - li reg, val; \ - stw reg, 12(r0); \ - lwz reg, 12(r0); -#else -#define DO_8xx_CPU6(val, reg) -#endif __HEAD -_ENTRY(_stext); -_ENTRY(_start); +_GLOBAL(_stext); +_GLOBAL(_start); /* MPC8xx * This port was done on an MBX board with an 860. Right now I only @@ -65,13 +68,6 @@ _ENTRY(_start); * 8M 1:1. I also mapped an additional I/O space 1:1 so we can get to * the "internal" processor registers before MMU_init is called. * - * The TLB code currently contains a major hack. Since I use the condition - * code register, I have to save and restore it. I am out of registers, so - * I just store it in memory location 0 (the TLB handlers are not reentrant). - * To avoid making any decisions, I need to use the "segment" valid bit - * in the first level table, but that would require many changes to the - * Linux page directory/table functions that I don't want to do right now. - * * -- Dan */ .globl __start @@ -94,541 +90,354 @@ turn_on_mmu: lis r0,start_here@h ori r0,r0,start_here@l mtspr SPRN_SRR0,r0 - SYNC rfi /* enables MMU */ -/* - * Exception entry code. This code runs with address translation - * turned off, i.e. using physical addresses. - * We assume sprg3 has the physical address of the current - * task's thread_struct. - */ -#define EXCEPTION_PROLOG \ - mtspr SPRN_SPRG_SCRATCH0,r10; \ - mtspr SPRN_SPRG_SCRATCH1,r11; \ - mfcr r10; \ - EXCEPTION_PROLOG_1; \ - EXCEPTION_PROLOG_2 - -#define EXCEPTION_PROLOG_1 \ - mfspr r11,SPRN_SRR1; /* check whether user or kernel */ \ - andi. r11,r11,MSR_PR; \ - tophys(r11,r1); /* use tophys(r1) if kernel */ \ - beq 1f; \ - mfspr r11,SPRN_SPRG_THREAD; \ - lwz r11,THREAD_INFO-THREAD(r11); \ - addi r11,r11,THREAD_SIZE; \ - tophys(r11,r11); \ -1: subi r11,r11,INT_FRAME_SIZE /* alloc exc. frame */ - - -#define EXCEPTION_PROLOG_2 \ - CLR_TOP32(r11); \ - stw r10,_CCR(r11); /* save registers */ \ - stw r12,GPR12(r11); \ - stw r9,GPR9(r11); \ - mfspr r10,SPRN_SPRG_SCRATCH0; \ - stw r10,GPR10(r11); \ - mfspr r12,SPRN_SPRG_SCRATCH1; \ - stw r12,GPR11(r11); \ - mflr r10; \ - stw r10,_LINK(r11); \ - mfspr r12,SPRN_SRR0; \ - mfspr r9,SPRN_SRR1; \ - stw r1,GPR1(r11); \ - stw r1,0(r11); \ - tovirt(r1,r11); /* set new kernel sp */ \ - li r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \ - MTMSRD(r10); /* (except for mach check in rtas) */ \ - stw r0,GPR0(r11); \ - SAVE_4GPRS(3, r11); \ - SAVE_2GPRS(7, r11) -/* - * Note: code which follows this uses cr0.eq (set if from kernel), - * r11, r12 (SRR0), and r9 (SRR1). - * - * Note2: once we have set r1 we are in a position to take exceptions - * again, and we could thus set MSR:RI at that point. - */ +#ifdef CONFIG_PERF_EVENTS + .align 4 -/* - * Exception vectors. - */ -#define EXCEPTION(n, label, hdlr, xfer) \ - . = n; \ -label: \ - EXCEPTION_PROLOG; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - xfer(n, hdlr) - -#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret) \ - li r10,trap; \ - stw r10,_TRAP(r11); \ - li r10,MSR_KERNEL; \ - copyee(r10, r9); \ - bl tfer; \ -i##n: \ - .long hdlr; \ - .long ret - -#define COPY_EE(d, s) rlwimi d,s,0,16,16 -#define NOCOPY(d, s) - -#define EXC_XFER_STD(n, hdlr) \ - EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full, \ - ret_from_except_full) - -#define EXC_XFER_LITE(n, hdlr) \ - EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \ - ret_from_except) - -#define EXC_XFER_EE(n, hdlr) \ - EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \ - ret_from_except_full) - -#define EXC_XFER_EE_LITE(n, hdlr) \ - EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \ - ret_from_except) + .globl itlb_miss_counter +itlb_miss_counter: + .space 4 + + .globl dtlb_miss_counter +dtlb_miss_counter: + .space 4 + + .globl instruction_counter +instruction_counter: + .space 4 +#endif /* System reset */ - EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD) + EXCEPTION(INTERRUPT_SYSTEM_RESET, Reset, system_reset_exception) /* Machine check */ - . = 0x200 -MachineCheck: - EXCEPTION_PROLOG - mfspr r4,SPRN_DAR - stw r4,_DAR(r11) - li r5,0x00f0 - mtspr SPRN_DAR,r5 /* Tag DAR, to be used in DTLB Error */ - mfspr r5,SPRN_DSISR - stw r5,_DSISR(r11) - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_STD(0x200, machine_check_exception) - -/* Data access exception. - * This is "never generated" by the MPC8xx. We jump to it for other - * translation errors. - */ - . = 0x300 -DataAccess: - EXCEPTION_PROLOG - mfspr r10,SPRN_DSISR - stw r10,_DSISR(r11) - mr r5,r10 - mfspr r4,SPRN_DAR - li r10,0x00f0 - mtspr SPRN_DAR,r10 /* Tag DAR, to be used in DTLB Error */ - EXC_XFER_LITE(0x300, handle_page_fault) - -/* Instruction access exception. - * This is "never generated" by the MPC8xx. We jump to it for other - * translation errors. - */ - . = 0x400 -InstructionAccess: - EXCEPTION_PROLOG - mr r4,r12 - mr r5,r9 - EXC_XFER_LITE(0x400, handle_page_fault) + START_EXCEPTION(INTERRUPT_MACHINE_CHECK, MachineCheck) + EXCEPTION_PROLOG INTERRUPT_MACHINE_CHECK MachineCheck handle_dar_dsisr=1 + prepare_transfer_to_handler + bl machine_check_exception + b interrupt_return /* External interrupt */ - EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE) + EXCEPTION(INTERRUPT_EXTERNAL, HardwareInterrupt, do_IRQ) /* Alignment exception */ - . = 0x600 -Alignment: - EXCEPTION_PROLOG - mfspr r4,SPRN_DAR - stw r4,_DAR(r11) - li r5,0x00f0 - mtspr SPRN_DAR,r5 /* Tag DAR, to be used in DTLB Error */ - mfspr r5,SPRN_DSISR - stw r5,_DSISR(r11) - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_EE(0x600, alignment_exception) + START_EXCEPTION(INTERRUPT_ALIGNMENT, Alignment) + EXCEPTION_PROLOG INTERRUPT_ALIGNMENT Alignment handle_dar_dsisr=1 + prepare_transfer_to_handler + bl alignment_exception + REST_NVGPRS(r1) + b interrupt_return /* Program check exception */ - EXCEPTION(0x700, ProgramCheck, program_check_exception, EXC_XFER_STD) - -/* No FPU on MPC8xx. This exception is not supposed to happen. -*/ - EXCEPTION(0x800, FPUnavailable, unknown_exception, EXC_XFER_STD) + START_EXCEPTION(INTERRUPT_PROGRAM, ProgramCheck) + EXCEPTION_PROLOG INTERRUPT_PROGRAM ProgramCheck + prepare_transfer_to_handler + bl program_check_exception + REST_NVGPRS(r1) + b interrupt_return /* Decrementer */ - EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE) - - EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE) - EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE) + EXCEPTION(INTERRUPT_DECREMENTER, Decrementer, timer_interrupt) /* System call */ - . = 0xc00 -SystemCall: - EXCEPTION_PROLOG - EXC_XFER_EE_LITE(0xc00, DoSyscall) + START_EXCEPTION(INTERRUPT_SYSCALL, SystemCall) + SYSCALL_ENTRY INTERRUPT_SYSCALL /* Single step - not used on 601 */ - EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD) - EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_EE) - EXCEPTION(0xf00, Trap_0f, unknown_exception, EXC_XFER_EE) + EXCEPTION(INTERRUPT_TRACE, SingleStep, single_step_exception) /* On the MPC8xx, this is a software emulation interrupt. It occurs * for all unimplemented and illegal instructions. */ - EXCEPTION(0x1000, SoftEmu, SoftwareEmulation, EXC_XFER_STD) + START_EXCEPTION(INTERRUPT_SOFT_EMU_8xx, SoftEmu) + EXCEPTION_PROLOG INTERRUPT_SOFT_EMU_8xx SoftEmu + prepare_transfer_to_handler + bl emulation_assist_interrupt + REST_NVGPRS(r1) + b interrupt_return - . = 0x1100 /* * For the MPC8xx, this is a software tablewalk to load the instruction - * TLB. It is modelled after the example in the Motorola manual. The task - * switch loads the M_TWB register with the pointer to the first level table. - * If we discover there is no second level table (value is zero) or if there + * TLB. The task switch loads the M_TWB register with the pointer to the first + * level table. + * If there is no second level table (value is zero) or if there * is an invalid pte, we load that into the TLB, which causes another fault * into the TLB Error interrupt where we can handle such problems. * We have to use the MD_xxx registers for the tablewalk because the * equivalent MI_xxx registers only perform the attribute functions. */ -InstructionTLBMiss: -#ifdef CONFIG_8xx_CPU6 - stw r3, 8(r0) -#endif - DO_8xx_CPU6(0x3f80, r3) - mtspr SPRN_M_TW, r10 /* Save a couple of working registers */ - mfcr r10 -#ifdef CONFIG_8xx_CPU6 - stw r10, 0(r0) - stw r11, 4(r0) -#else - mtspr SPRN_DAR, r10 - mtspr SPRN_SPRG2, r11 -#endif - mfspr r10, SPRN_SRR0 /* Get effective address of fault */ + #ifdef CONFIG_8xx_CPU15 - addi r11, r10, 0x1000 - tlbie r11 - addi r11, r10, -0x1000 - tlbie r11 +#define INVALIDATE_ADJACENT_PAGES_CPU15(addr, tmp) \ + addi tmp, addr, PAGE_SIZE; \ + tlbie tmp; \ + addi tmp, addr, -PAGE_SIZE; \ + tlbie tmp +#else +#define INVALIDATE_ADJACENT_PAGES_CPU15(addr, tmp) #endif - DO_8xx_CPU6(0x3780, r3) - mtspr SPRN_MD_EPN, r10 /* Have to use MD_EPN for walk, MI_EPN can't */ - mfspr r10, SPRN_M_TWB /* Get level 1 table entry address */ - /* If we are faulting a kernel address, we have to use the - * kernel page tables. - */ -#ifdef CONFIG_MODULES - /* Only modules will cause ITLB Misses as we always - * pin the first 8MB of kernel memory */ - andi. r11, r10, 0x0800 /* Address >= 0x80000000 */ - beq 3f - lis r11, swapper_pg_dir@h - ori r11, r11, swapper_pg_dir@l - rlwimi r10, r11, 0, 2, 19 -3: -#endif - lwz r11, 0(r10) /* Get the level 1 entry */ - rlwinm. r10, r11,0,0,19 /* Extract page descriptor page address */ - beq 2f /* If zero, don't try to find a pte */ + START_EXCEPTION(INTERRUPT_INST_TLB_MISS_8xx, InstructionTLBMiss) + mtspr SPRN_SPRG_SCRATCH2, r10 + mtspr SPRN_M_TW, r11 - /* We have a pte table, so load the MI_TWC with the attributes - * for this "segment." - */ - ori r11,r11,1 /* Set valid bit */ - DO_8xx_CPU6(0x2b80, r3) - mtspr SPRN_MI_TWC, r11 /* Set segment attributes */ - DO_8xx_CPU6(0x3b80, r3) - mtspr SPRN_MD_TWC, r11 /* Load pte table base address */ - mfspr r11, SPRN_MD_TWC /* ....and get the pte address */ - lwz r10, 0(r11) /* Get the pte */ - -#ifdef CONFIG_SWAP - andi. r11, r10, _PAGE_ACCESSED | _PAGE_PRESENT - cmpwi cr0, r11, _PAGE_ACCESSED | _PAGE_PRESENT - bne- cr0, 2f -#endif + mfspr r10, SPRN_SRR0 /* Get effective address of fault */ + INVALIDATE_ADJACENT_PAGES_CPU15(r10, r11) + mtspr SPRN_MD_EPN, r10 + mfspr r10, SPRN_M_TWB /* Get level 1 table */ + lwz r11, 0(r10) /* Get level 1 entry */ + mtspr SPRN_MD_TWC, r11 + mfspr r10, SPRN_MD_TWC + lwz r10, 0(r10) /* Get the pte */ + rlwimi r11, r10, 0, _PAGE_GUARDED | _PAGE_ACCESSED + rlwimi r11, r10, 32 - 9, _PMD_PAGE_512K + mtspr SPRN_MI_TWC, r11 /* The Linux PTE won't go exactly into the MMU TLB. - * Software indicator bits 21 and 28 must be clear. - * Software indicator bits 24, 25, 26, and 27 must be + * Software indicator bits 20 and 23 must be clear. + * Software indicator bits 22, 24, 25, 26, and 27 must be * set. All other Linux PTE bits control the behavior * of the MMU. */ - li r11, 0x00f0 - rlwimi r10, r11, 0, 0x07f8 /* Set 24-27, clear 21-23,28 */ - DO_8xx_CPU6(0x2d80, r3) + rlwinm r10, r10, 0, ~0x0f00 /* Clear bits 20-23 */ + rlwimi r10, r10, 4, 0x0400 /* Copy _PAGE_EXEC into bit 21 */ + ori r10, r10, RPN_PATTERN | 0x200 /* Set 22 and 24-27 */ mtspr SPRN_MI_RPN, r10 /* Update TLB entry */ /* Restore registers */ -#ifndef CONFIG_8xx_CPU6 - mfspr r10, SPRN_DAR - mtcr r10 - mtspr SPRN_DAR, r11 /* Tag DAR */ - mfspr r11, SPRN_SPRG2 -#else - lwz r11, 0(r0) - mtcr r11 - lwz r11, 4(r0) - lwz r3, 8(r0) -#endif - mfspr r10, SPRN_M_TW +0: mfspr r10, SPRN_SPRG_SCRATCH2 + mfspr r11, SPRN_M_TW + rfi + patch_site 0b, patch__itlbmiss_exit_1 + +#ifdef CONFIG_PERF_EVENTS + patch_site 0f, patch__itlbmiss_perf +0: lwz r10, (itlb_miss_counter - PAGE_OFFSET)@l(0) + addi r10, r10, 1 + stw r10, (itlb_miss_counter - PAGE_OFFSET)@l(0) + mfspr r10, SPRN_SPRG_SCRATCH2 + mfspr r11, SPRN_M_TW rfi -2: - mfspr r11, SPRN_SRR1 - /* clear all error bits as TLB Miss - * sets a few unconditionally - */ - rlwinm r11, r11, 0, 0xffff - mtspr SPRN_SRR1, r11 - - /* Restore registers */ -#ifndef CONFIG_8xx_CPU6 - mfspr r10, SPRN_DAR - mtcr r10 - li r11, 0x00f0 - mtspr SPRN_DAR, r11 /* Tag DAR */ - mfspr r11, SPRN_SPRG2 -#else - lwz r11, 0(r0) - mtcr r11 - lwz r11, 4(r0) - lwz r3, 8(r0) #endif - mfspr r10, SPRN_M_TW - b InstructionAccess - . = 0x1200 -DataStoreTLBMiss: -#ifdef CONFIG_8xx_CPU6 - stw r3, 8(r0) -#endif - DO_8xx_CPU6(0x3f80, r3) - mtspr SPRN_M_TW, r10 /* Save a couple of working registers */ - mfcr r10 -#ifdef CONFIG_8xx_CPU6 - stw r10, 0(r0) - stw r11, 4(r0) -#else - mtspr SPRN_DAR, r10 - mtspr SPRN_SPRG2, r11 -#endif - mfspr r10, SPRN_M_TWB /* Get level 1 table entry address */ + START_EXCEPTION(INTERRUPT_DATA_TLB_MISS_8xx, DataStoreTLBMiss) + mtspr SPRN_SPRG_SCRATCH2, r10 + mtspr SPRN_M_TW, r11 - /* If we are faulting a kernel address, we have to use the - * kernel page tables. - */ - andi. r11, r10, 0x0800 - beq 3f - lis r11, swapper_pg_dir@h - ori r11, r11, swapper_pg_dir@l - rlwimi r10, r11, 0, 2, 19 -3: - lwz r11, 0(r10) /* Get the level 1 entry */ - rlwinm. r10, r11,0,0,19 /* Extract page descriptor page address */ - beq 2f /* If zero, don't try to find a pte */ + mfspr r10, SPRN_M_TWB /* Get level 1 table */ + lwz r11, 0(r10) /* Get level 1 entry */ - /* We have a pte table, so load fetch the pte from the table. - */ - ori r11, r11, 1 /* Set valid bit in physical L2 page */ - DO_8xx_CPU6(0x3b80, r3) - mtspr SPRN_MD_TWC, r11 /* Load pte table base address */ - mfspr r10, SPRN_MD_TWC /* ....and get the pte address */ + mtspr SPRN_MD_TWC, r11 + mfspr r10, SPRN_MD_TWC lwz r10, 0(r10) /* Get the pte */ - /* Insert the Guarded flag into the TWC from the Linux PTE. + /* Insert Guarded and Accessed flags into the TWC from the Linux PTE. * It is bit 27 of both the Linux PTE and the TWC (at least * I got that right :-). It will be better when we can put * this into the Linux pgd/pmd and load it in the operation * above. */ - rlwimi r11, r10, 0, 27, 27 - /* Insert the WriteThru flag into the TWC from the Linux PTE. - * It is bit 25 in the Linux PTE and bit 30 in the TWC - */ - rlwimi r11, r10, 32-5, 30, 30 - DO_8xx_CPU6(0x3b80, r3) + rlwimi r11, r10, 0, _PAGE_GUARDED | _PAGE_ACCESSED + rlwimi r11, r10, 32 - 9, _PMD_PAGE_512K mtspr SPRN_MD_TWC, r11 - /* Both _PAGE_ACCESSED and _PAGE_PRESENT has to be set. - * We also need to know if the insn is a load/store, so: - * Clear _PAGE_PRESENT and load that which will - * trap into DTLB Error with store bit set accordinly. - */ - /* PRESENT=0x1, ACCESSED=0x20 - * r11 = ((r10 & PRESENT) & ((r10 & ACCESSED) >> 5)); - * r10 = (r10 & ~PRESENT) | r11; - */ -#ifdef CONFIG_SWAP - rlwinm r11, r10, 32-5, _PAGE_PRESENT - and r11, r11, r10 - rlwimi r10, r11, 0, _PAGE_PRESENT -#endif - /* Honour kernel RO, User NA */ - /* 0x200 == Extended encoding, bit 22 */ - rlwimi r10, r10, 32-2, 0x200 /* Copy USER to bit 22, 0x200 */ - /* r11 = (r10 & _PAGE_RW) >> 1 */ - rlwinm r11, r10, 32-1, 0x200 - or r10, r11, r10 - /* invert RW and 0x200 bits */ - xori r10, r10, _PAGE_RW | 0x200 - /* The Linux PTE won't go exactly into the MMU TLB. - * Software indicator bits 22 and 28 must be clear. * Software indicator bits 24, 25, 26, and 27 must be * set. All other Linux PTE bits control the behavior * of the MMU. */ -2: li r11, 0x00f0 - rlwimi r10, r11, 0, 24, 28 /* Set 24-27, clear 28 */ - DO_8xx_CPU6(0x3d80, r3) + li r11, RPN_PATTERN + rlwimi r10, r11, 0, 24, 27 /* Set 24-27 */ mtspr SPRN_MD_RPN, r10 /* Update TLB entry */ + mtspr SPRN_DAR, r11 /* Tag DAR */ /* Restore registers */ -#ifndef CONFIG_8xx_CPU6 - mfspr r10, SPRN_DAR - mtcr r10 - mtspr SPRN_DAR, r11 /* Tag DAR */ - mfspr r11, SPRN_SPRG2 -#else - mtspr SPRN_DAR, r11 /* Tag DAR */ - lwz r11, 0(r0) - mtcr r11 - lwz r11, 4(r0) - lwz r3, 8(r0) -#endif - mfspr r10, SPRN_M_TW + +0: mfspr r10, SPRN_SPRG_SCRATCH2 + mfspr r11, SPRN_M_TW + rfi + patch_site 0b, patch__dtlbmiss_exit_1 + +#ifdef CONFIG_PERF_EVENTS + patch_site 0f, patch__dtlbmiss_perf +0: lwz r10, (dtlb_miss_counter - PAGE_OFFSET)@l(0) + addi r10, r10, 1 + stw r10, (dtlb_miss_counter - PAGE_OFFSET)@l(0) + mfspr r10, SPRN_SPRG_SCRATCH2 + mfspr r11, SPRN_M_TW rfi +#endif /* This is an instruction TLB error on the MPC8xx. This could be due * to many reasons, such as executing guarded memory or illegal instruction * addresses. There is nothing to do but handle a big time error fault. */ - . = 0x1300 -InstructionTLBError: - b InstructionAccess + START_EXCEPTION(INTERRUPT_INST_TLB_ERROR_8xx, InstructionTLBError) + /* 0x400 is InstructionAccess exception, needed by bad_page_fault() */ + EXCEPTION_PROLOG INTERRUPT_INST_STORAGE InstructionTLBError + andis. r5,r9,DSISR_SRR1_MATCH_32S@h /* Filter relevant SRR1 bits */ + andis. r10,r9,SRR1_ISI_NOPT@h + beq+ .Litlbie + tlbie r12 +.Litlbie: + stw r12, _DAR(r11) + stw r5, _DSISR(r11) + prepare_transfer_to_handler + bl do_page_fault + b interrupt_return /* This is the data TLB error on the MPC8xx. This could be due to - * many reasons, including a dirty update to a pte. We can catch that - * one here, but anything else is an error. First, we track down the - * Linux pte. If it is valid, write access is allowed, but the - * page dirty bit is not set, we will set it and reload the TLB. For - * any other case, we bail out to a higher level function that can - * handle it. + * many reasons, including a dirty update to a pte. We bail out to + * a higher level function that can handle it. */ - . = 0x1400 -DataTLBError: -#ifdef CONFIG_8xx_CPU6 - stw r3, 8(r0) -#endif - DO_8xx_CPU6(0x3f80, r3) - mtspr SPRN_M_TW, r10 /* Save a couple of working registers */ - mfcr r10 - stw r10, 0(r0) - stw r11, 4(r0) - - mfspr r10, SPRN_DAR - cmpwi cr0, r10, 0x00f0 - beq- FixupDAR /* must be a buggy dcbX, icbi insn. */ -DARFixed:/* Return from dcbx instruction bug workaround, r10 holds value of DAR */ - mfspr r10, SPRN_M_TW /* Restore registers */ - lwz r11, 0(r0) - mtcr r11 - lwz r11, 4(r0) -#ifdef CONFIG_8xx_CPU6 - lwz r3, 8(r0) + START_EXCEPTION(INTERRUPT_DATA_TLB_ERROR_8xx, DataTLBError) + EXCEPTION_PROLOG_0 handle_dar_dsisr=1 + mfspr r11, SPRN_DAR + cmpwi cr1, r11, RPN_PATTERN + beq- cr1, FixupDAR /* must be a buggy dcbX, icbi insn. */ +DARFixed:/* Return from dcbx instruction bug workaround */ + mfspr r11, SPRN_DSISR + rlwinm r11, r11, 0, DSISR_NOHPTE + cmpwi cr1, r11, 0 + beq+ cr1, .Ldtlbie + mfspr r11, SPRN_DAR + tlbie r11 + rlwinm r11, r11, 16, 0xffff + cmplwi cr1, r11, TASK_SIZE@h + bge- cr1, FixupPGD +.Ldtlbie: + EXCEPTION_PROLOG_1 + /* 0x300 is DataAccess exception, needed by bad_page_fault() */ + EXCEPTION_PROLOG_2 INTERRUPT_DATA_STORAGE DataTLBError handle_dar_dsisr=1 + prepare_transfer_to_handler + bl do_page_fault + b interrupt_return + +#ifdef CONFIG_VMAP_STACK + vmap_stack_overflow_exception #endif - b DataAccess - - EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE) /* On the MPC8xx, these next four traps are used for development * support of breakpoints and such. Someday I will get around to * using them. */ - EXCEPTION(0x1c00, Trap_1c, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_EE) + START_EXCEPTION(INTERRUPT_DATA_BREAKPOINT_8xx, DataBreakpoint) + EXCEPTION_PROLOG_0 handle_dar_dsisr=1 + mfspr r11, SPRN_SRR0 + cmplwi cr1, r11, (.Ldtlbie - PAGE_OFFSET)@l + cmplwi cr7, r11, (.Litlbie - PAGE_OFFSET)@l + cror 4*cr1+eq, 4*cr1+eq, 4*cr7+eq + bne cr1, 1f + mtcr r10 + mfspr r10, SPRN_SPRG_SCRATCH0 + mfspr r11, SPRN_SPRG_SCRATCH1 + rfi +1: EXCEPTION_PROLOG_1 + EXCEPTION_PROLOG_2 INTERRUPT_DATA_BREAKPOINT_8xx DataBreakpoint handle_dar_dsisr=1 + mfspr r4,SPRN_BAR + stw r4,_DAR(r11) + prepare_transfer_to_handler + bl do_break + REST_NVGPRS(r1) + b interrupt_return + +#ifdef CONFIG_PERF_EVENTS + START_EXCEPTION(INTERRUPT_INST_BREAKPOINT_8xx, InstructionBreakpoint) + mtspr SPRN_SPRG_SCRATCH0, r10 + lwz r10, (instruction_counter - PAGE_OFFSET)@l(0) + addi r10, r10, -1 + stw r10, (instruction_counter - PAGE_OFFSET)@l(0) + lis r10, 0xffff + ori r10, r10, 0x01 + mtspr SPRN_COUNTA, r10 + mfspr r10, SPRN_SPRG_SCRATCH0 + rfi +#else + EXCEPTION(INTERRUPT_INST_BREAKPOINT_8xx, Trap_1d, unknown_exception) +#endif + EXCEPTION(0x1e00, Trap_1e, unknown_exception) + EXCEPTION(0x1f00, Trap_1f, unknown_exception) + + __HEAD . = 0x2000 +FixupPGD: + mtspr SPRN_M_TW, r10 + mfspr r10, SPRN_DAR + mtspr SPRN_MD_EPN, r10 + mfspr r11, SPRN_M_TWB /* Get level 1 table */ + lwz r10, 0(r11) /* Get the level 1 entry */ + cmpwi cr1, r10, 0 + bne cr1, 1f + + rlwinm r10, r11, 0, 20, 31 + oris r10, r10, (swapper_pg_dir - PAGE_OFFSET)@ha + lwz r10, (swapper_pg_dir - PAGE_OFFSET)@l(r10) /* Get the level 1 entry */ + cmpwi cr1, r10, 0 + beq cr1, 1f + stw r10, 0(r11) /* Set the level 1 entry */ + mfspr r10, SPRN_M_TW + mtcr r10 + mfspr r10, SPRN_SPRG_SCRATCH0 + mfspr r11, SPRN_SPRG_SCRATCH1 + rfi +1: + mfspr r10, SPRN_M_TW + b .Ldtlbie + /* This is the procedure to calculate the data EA for buggy dcbx,dcbi instructions * by decoding the registers used by the dcbx instruction and adding them. - * DAR is set to the calculated address and r10 also holds the EA on exit. + * DAR is set to the calculated address. */ - /* define if you don't want to use self modifying code */ -#define NO_SELF_MODIFYING_CODE FixupDAR:/* Entry point for dcbx workaround. */ + mtspr SPRN_M_TW, r10 /* fetch instruction from memory. */ mfspr r10, SPRN_SRR0 - andis. r11, r10, 0x8000 /* Address >= 0x80000000 */ - DO_8xx_CPU6(0x3780, r3) mtspr SPRN_MD_EPN, r10 - mfspr r11, SPRN_M_TWB /* Get level 1 table entry address */ - beq- 3f /* Branch if user space */ - lis r11, (swapper_pg_dir-PAGE_OFFSET)@h - ori r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l - rlwimi r11, r10, 32-20, 0xffc /* r11 = r11&~0xffc|(r10>>20)&0xffc */ -3: lwz r11, 0(r11) /* Get the level 1 entry */ - DO_8xx_CPU6(0x3b80, r3) - mtspr SPRN_MD_TWC, r11 /* Load pte table base address */ - mfspr r11, SPRN_MD_TWC /* ....and get the pte address */ + rlwinm r11, r10, 16, 0xfff8 + cmpli cr1, r11, TASK_SIZE@h + mfspr r11, SPRN_M_TWB /* Get level 1 table */ + blt+ cr1, 3f + + /* create physical page address from effective address */ + tophys(r11, r10) + mfspr r11, SPRN_M_TWB /* Get level 1 table */ + rlwinm r11, r11, 0, 20, 31 + oris r11, r11, (swapper_pg_dir - PAGE_OFFSET)@h + ori r11, r11, (swapper_pg_dir - PAGE_OFFSET)@l +3: + lwz r11, 0(r11) /* Get the level 1 entry */ + rlwinm r11, r11, 0, ~_PMD_PAGE_8M + mtspr SPRN_MD_TWC, r11 + mfspr r11, SPRN_MD_TWC lwz r11, 0(r11) /* Get the pte */ /* concat physical page address(r11) and page offset(r10) */ - rlwimi r11, r10, 0, 20, 31 + rlwimi r11, r10, 0, 32 - PAGE_SHIFT, 31 lwz r11,0(r11) /* Check if it really is a dcbx instruction. */ /* dcbt and dcbtst does not generate DTLB Misses/Errors, * no need to include them here */ - srwi r10, r11, 26 /* check if major OP code is 31 */ - cmpwi cr0, r10, 31 - bne- 141f - rlwinm r10, r11, 0, 21, 30 - cmpwi cr0, r10, 2028 /* Is dcbz? */ - beq+ 142f - cmpwi cr0, r10, 940 /* Is dcbi? */ - beq+ 142f - cmpwi cr0, r10, 108 /* Is dcbst? */ - beq+ 144f /* Fix up store bit! */ - cmpwi cr0, r10, 172 /* Is dcbf? */ - beq+ 142f - cmpwi cr0, r10, 1964 /* Is icbi? */ - beq+ 142f -141: mfspr r10, SPRN_DAR /* r10 must hold DAR at exit */ + xoris r10, r11, 0x7c00 /* check if major OP code is 31 */ + rlwinm r10, r10, 0, 21, 5 + cmpwi cr1, r10, 2028 /* Is dcbz? */ + beq+ cr1, 142f + cmpwi cr1, r10, 940 /* Is dcbi? */ + beq+ cr1, 142f + cmpwi cr1, r10, 108 /* Is dcbst? */ + beq+ cr1, 144f /* Fix up store bit! */ + cmpwi cr1, r10, 172 /* Is dcbf? */ + beq+ cr1, 142f + cmpwi cr1, r10, 1964 /* Is icbi? */ + beq+ cr1, 142f +141: mfspr r10,SPRN_M_TW b DARFixed /* Nope, go back to normal TLB processing */ 144: mfspr r10, SPRN_DSISR rlwinm r10, r10,0,7,5 /* Clear store bit for buggy dcbst insn */ mtspr SPRN_DSISR, r10 142: /* continue, it was a dcbx, dcbi instruction. */ -#ifdef CONFIG_8xx_CPU6 - lwz r3, 8(r0) /* restore r3 from memory */ -#endif -#ifndef NO_SELF_MODIFYING_CODE - andis. r10,r11,0x1f /* test if reg RA is r0 */ - li r10,modified_instr@l - dcbtst r0,r10 /* touch for store */ - rlwinm r11,r11,0,0,20 /* Zero lower 10 bits */ - oris r11,r11,640 /* Transform instr. to a "add r10,RA,RB" */ - ori r11,r11,532 - stw r11,0(r10) /* store add/and instruction */ - dcbf 0,r10 /* flush new instr. to memory. */ - icbi 0,r10 /* invalidate instr. cache line */ - lwz r11, 4(r0) /* restore r11 from memory */ - mfspr r10, SPRN_M_TW /* restore r10 from M_TW */ - isync /* Wait until new instr is loaded from memory */ -modified_instr: - .space 4 /* this is where the add instr. is stored */ - bne+ 143f - subf r10,r0,r10 /* r10=r10-r0, only if reg RA is r0 */ -143: mtdar r10 /* store faulting EA in DAR */ - b DARFixed /* Go back to normal TLB handling */ -#else mfctr r10 mtdar r10 /* save ctr reg in DAR */ rlwinm r10, r11, 24, 24, 28 /* offset into jump table for reg RB */ @@ -670,30 +479,33 @@ modified_instr: add r10, r10, r30 ;b 151f add r10, r10, r31 151: - rlwinm. r11,r11,19,24,28 /* offset into jump table for reg RA */ - beq 152f /* if reg RA is zero, don't add it */ + rlwinm r11,r11,19,24,28 /* offset into jump table for reg RA */ + cmpwi cr1, r11, 0 + beq cr1, 152f /* if reg RA is zero, don't add it */ addi r11, r11, 150b@l /* add start of table */ mtctr r11 /* load ctr with jump address */ rlwinm r11,r11,0,16,10 /* make sure we don't execute this more than once */ bctr /* jump into table */ 152: mfdar r11 + mtdar r10 mtctr r11 /* restore ctr reg from DAR */ - mtdar r10 /* save fault EA to DAR */ + mfspr r11, SPRN_SPRG_THREAD + stw r10, DAR(r11) + mfspr r10, SPRN_DSISR + stw r10, DSISR(r11) + mfspr r10,SPRN_M_TW b DARFixed /* Go back to normal TLB handling */ /* special handling for r10,r11 since these are modified already */ -153: lwz r11, 4(r0) /* load r11 from memory */ - b 155f -154: mfspr r11, SPRN_M_TW /* load r10 from M_TW */ -155: add r10, r10, r11 /* add it */ +153: mfspr r11, SPRN_SPRG_SCRATCH1 /* load r11 from SPRN_SPRG_SCRATCH1 */ + add r10, r10, r11 /* add it */ + mfctr r11 /* restore r11 */ + b 151b +154: mfspr r11, SPRN_SPRG_SCRATCH0 /* load r10 from SPRN_SPRG_SCRATCH0 */ + add r10, r10, r11 /* add it */ mfctr r11 /* restore r11 */ b 151b -#endif - - .globl giveup_fpu -giveup_fpu: - blr /* * This is where the main kernel code starts. @@ -711,14 +523,25 @@ start_here: /* stack */ lis r1,init_thread_union@ha addi r1,r1,init_thread_union@l + lis r0, STACK_END_MAGIC@h + ori r0, r0, STACK_END_MAGIC@l + stw r0, 0(r1) li r0,0 - stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1) + stwu r0,THREAD_SIZE-STACK_FRAME_MIN_SIZE(r1) + + lis r6, swapper_pg_dir@h + ori r6, r6, swapper_pg_dir@l + tophys(r6,r6) + mtspr SPRN_M_TWB, r6 bl early_init /* We have to do this with MMU on */ /* * Decide what sort of machine this is and initialize the MMU. */ +#ifdef CONFIG_KASAN + bl kasan_early_init +#endif li r3,0 mr r4,r31 bl machine_init @@ -734,17 +557,6 @@ start_here: * init's THREAD like the context switch code does, but this is * easier......until someone changes init's static structures. */ - lis r6, swapper_pg_dir@h - ori r6, r6, swapper_pg_dir@l - tophys(r6,r6) -#ifdef CONFIG_8xx_CPU6 - lis r4, cpu6_errata_word@h - ori r4, r4, cpu6_errata_word@l - li r3, 0x3980 - stw r3, 12(r4) - lwz r3, 12(r4) -#endif - mtspr SPRN_M_TWB, r6 lis r4,2f@h ori r4,r4,2f@l tophys(r4,r4) @@ -754,18 +566,42 @@ start_here: rfi /* Load up the kernel context */ 2: - SYNC /* Force all PTE updates to finish */ +#ifdef CONFIG_PIN_TLB_IMMR + lis r0, MD_TWAM@h + oris r0, r0, 0x1f00 + mtspr SPRN_MD_CTR, r0 + LOAD_REG_IMMEDIATE(r0, VIRT_IMMR_BASE | MD_EVALID) + tlbie r0 + mtspr SPRN_MD_EPN, r0 + LOAD_REG_IMMEDIATE(r0, MD_SVALID | MD_PS512K | MD_GUARDED) + mtspr SPRN_MD_TWC, r0 + mfspr r0, SPRN_IMMR + rlwinm r0, r0, 0, 0xfff80000 + ori r0, r0, 0xf0 | _PAGE_DIRTY | _PAGE_SPS | _PAGE_SH | \ + _PAGE_NO_CACHE | _PAGE_PRESENT + mtspr SPRN_MD_RPN, r0 + lis r0, (MD_TWAM | MD_RSV4I)@h + mtspr SPRN_MD_CTR, r0 +#endif +#ifndef CONFIG_PIN_TLB_TEXT + li r0, 0 + mtspr SPRN_MI_CTR, r0 +#endif +#if !defined(CONFIG_PIN_TLB_DATA) && !defined(CONFIG_PIN_TLB_IMMR) + lis r0, MD_TWAM@h + mtspr SPRN_MD_CTR, r0 +#endif tlbia /* Clear all TLB entries */ sync /* wait for tlbia/tlbie to finish */ - TLBSYNC /* ... on all CPUs */ /* set up the PTE pointers for the Abatron bdiGDB. */ - tovirt(r6,r6) lis r5, abatron_pteptrs@h ori r5, r5, abatron_pteptrs@l - stw r5, 0xf0(r0) /* Must match your Abatron config file */ + stw r5, 0xf0(0) /* Must match your Abatron config file */ tophys(r5,r5) + lis r6, swapper_pg_dir@h + ori r6, r6, swapper_pg_dir@l stw r6, 0(r5) /* Now turn on the MMU for real! */ @@ -781,93 +617,50 @@ start_here: * virtual to physical. Also, set the cache mode since that is defined * by TLB entries and perform any additional mapping (like of the IMMR). * If configured to pin some TLBs, we pin the first 8 Mbytes of kernel, - * 24 Mbytes of data, and the 8M IMMR space. Anything not covered by + * 24 Mbytes of data, and the 512k IMMR space. Anything not covered by * these mappings is mapped by page tables. */ -initial_mmu: - tlbia /* Invalidate all TLB entries */ -/* Always pin the first 8 MB ITLB to prevent ITLB - misses while mucking around with SRR0/SRR1 in asm -*/ - lis r8, MI_RSV4I@h - ori r8, r8, 0x1c00 - - mtspr SPRN_MI_CTR, r8 /* Set instruction MMU control */ +SYM_FUNC_START_LOCAL(initial_mmu) + li r8, 0 + mtspr SPRN_MI_CTR, r8 /* remove PINNED ITLB entries */ + lis r10, MD_TWAM@h + mtspr SPRN_MD_CTR, r10 /* remove PINNED DTLB entries */ -#ifdef CONFIG_PIN_TLB - lis r10, (MD_RSV4I | MD_RESETVAL)@h - ori r10, r10, 0x1c00 - mr r8, r10 -#else - lis r10, MD_RESETVAL@h -#endif -#ifndef CONFIG_8xx_COPYBACK - oris r10, r10, MD_WTDEF@h -#endif - mtspr SPRN_MD_CTR, r10 /* Set data TLB control */ + tlbia /* Invalidate all TLB entries */ - /* Now map the lower 8 Meg into the TLBs. For this quick hack, - * we can load the instruction and data TLB registers with the - * same values. - */ - lis r8, KERNELBASE@h /* Create vaddr for TLB */ - ori r8, r8, MI_EVALID /* Mark it valid */ - mtspr SPRN_MI_EPN, r8 - mtspr SPRN_MD_EPN, r8 - li r8, MI_PS8MEG /* Set 8M byte page */ - ori r8, r8, MI_SVALID /* Make it valid */ - mtspr SPRN_MI_TWC, r8 - mtspr SPRN_MD_TWC, r8 - li r8, MI_BOOTINIT /* Create RPN for address 0 */ - mtspr SPRN_MI_RPN, r8 /* Store TLB entry */ - mtspr SPRN_MD_RPN, r8 - lis r8, MI_Kp@h /* Set the protection mode */ + lis r8, MI_APG_INIT@h /* Set protection modes */ + ori r8, r8, MI_APG_INIT@l mtspr SPRN_MI_AP, r8 + lis r8, MD_APG_INIT@h + ori r8, r8, MD_APG_INIT@l mtspr SPRN_MD_AP, r8 - /* Map another 8 MByte at the IMMR to get the processor - * internal registers (among other things). - */ -#ifdef CONFIG_PIN_TLB - addi r10, r10, 0x0100 - mtspr SPRN_MD_CTR, r10 -#endif - mfspr r9, 638 /* Get current IMMR */ - andis. r9, r9, 0xff80 /* Get 8Mbyte boundary */ - - mr r8, r9 /* Create vaddr for TLB */ - ori r8, r8, MD_EVALID /* Mark it valid */ - mtspr SPRN_MD_EPN, r8 - li r8, MD_PS8MEG /* Set 8M byte page */ - ori r8, r8, MD_SVALID /* Make it valid */ - mtspr SPRN_MD_TWC, r8 - mr r8, r9 /* Create paddr for TLB */ - ori r8, r8, MI_BOOTINIT|0x2 /* Inhibit cache -- Cort */ - mtspr SPRN_MD_RPN, r8 - -#ifdef CONFIG_PIN_TLB - /* Map two more 8M kernel data pages. - */ - addi r10, r10, 0x0100 - mtspr SPRN_MD_CTR, r10 - - lis r8, KERNELBASE@h /* Create vaddr for TLB */ - addis r8, r8, 0x0080 /* Add 8M */ - ori r8, r8, MI_EVALID /* Mark it valid */ - mtspr SPRN_MD_EPN, r8 - li r9, MI_PS8MEG /* Set 8M byte page */ - ori r9, r9, MI_SVALID /* Make it valid */ - mtspr SPRN_MD_TWC, r9 - li r11, MI_BOOTINIT /* Create RPN for address 0 */ - addis r11, r11, 0x0080 /* Add 8M */ + /* Map the lower RAM (up to 32 Mbytes) into the ITLB and DTLB */ + lis r8, MI_RSV4I@h + ori r8, r8, 0x1c00 + oris r12, r10, MD_RSV4I@h + ori r12, r12, 0x1c00 + li r9, 4 /* up to 4 pages of 8M */ + mtctr r9 + lis r9, KERNELBASE@h /* Create vaddr for TLB */ + li r10, MI_PS8MEG | _PMD_ACCESSED | MI_SVALID + li r11, MI_BOOTINIT /* Create RPN for address 0 */ +1: + mtspr SPRN_MI_CTR, r8 /* Set instruction MMU control */ + addi r8, r8, 0x100 + ori r0, r9, MI_EVALID /* Mark it valid */ + mtspr SPRN_MI_EPN, r0 + mtspr SPRN_MI_TWC, r10 + mtspr SPRN_MI_RPN, r11 /* Store TLB entry */ + mtspr SPRN_MD_CTR, r12 + addi r12, r12, 0x100 + mtspr SPRN_MD_EPN, r0 + mtspr SPRN_MD_TWC, r10 mtspr SPRN_MD_RPN, r11 + addis r9, r9, 0x80 + addis r11, r11, 0x80 - addis r8, r8, 0x0080 /* Add 8M */ - mtspr SPRN_MD_EPN, r8 - mtspr SPRN_MD_TWC, r9 - addis r11, r11, 0x0080 /* Add 8M */ - mtspr SPRN_MD_RPN, r11 -#endif + bdnz 1b /* Since the cache is enabled according to the information we * just loaded into the TLB, invalidate and enable the caches here. @@ -878,102 +671,119 @@ initial_mmu: mtspr SPRN_DC_CST, r8 lis r8, IDC_ENABLE@h mtspr SPRN_IC_CST, r8 -#ifdef CONFIG_8xx_COPYBACK mtspr SPRN_DC_CST, r8 + /* Disable debug mode entry on breakpoints */ + mfspr r8, SPRN_DER +#ifdef CONFIG_PERF_EVENTS + rlwinm r8, r8, 0, ~0xc #else - /* For a debug option, I left this here to easily enable - * the write through cache mode - */ - lis r8, DC_SFWT@h - mtspr SPRN_DC_CST, r8 - lis r8, IDC_ENABLE@h - mtspr SPRN_DC_CST, r8 + rlwinm r8, r8, 0, ~0x8 #endif + mtspr SPRN_DER, r8 blr +SYM_FUNC_END(initial_mmu) - -/* - * Set up to use a given MMU context. - * r3 is context number, r4 is PGD pointer. - * - * We place the physical address of the new task page directory loaded - * into the MMU base register, and set the ASID compare register with - * the new "context." - */ -_GLOBAL(set_context) - -#ifdef CONFIG_BDI_SWITCH - /* Context switch the PTE pointer for the Abatron BDI2000. - * The PGDIR is passed as second argument. - */ - lis r5, KERNELBASE@h - lwz r5, 0xf0(r5) - stw r4, 0x4(r5) +#ifdef CONFIG_PIN_TLB +_GLOBAL(mmu_pin_tlb) + lis r9, (1f - PAGE_OFFSET)@h + ori r9, r9, (1f - PAGE_OFFSET)@l + mfmsr r10 + mflr r11 + li r12, MSR_KERNEL & ~(MSR_IR | MSR_DR | MSR_RI) + rlwinm r0, r10, 0, ~MSR_RI + rlwinm r0, r0, 0, ~MSR_EE + mtmsr r0 + isync + .align 4 + mtspr SPRN_SRR0, r9 + mtspr SPRN_SRR1, r12 + rfi +1: + li r5, 0 + lis r6, MD_TWAM@h + mtspr SPRN_MI_CTR, r5 + mtspr SPRN_MD_CTR, r6 + tlbia + +#ifdef CONFIG_PIN_TLB_TEXT + LOAD_REG_IMMEDIATE(r5, 28 << 8) + LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET) + LOAD_REG_IMMEDIATE(r7, MI_SVALID | MI_PS8MEG | _PMD_ACCESSED) + LOAD_REG_IMMEDIATE(r8, 0xf0 | _PAGE_RO | _PAGE_SPS | _PAGE_SH | _PAGE_PRESENT) + LOAD_REG_ADDR(r9, _sinittext) + li r0, 4 + mtctr r0 + +2: ori r0, r6, MI_EVALID + mtspr SPRN_MI_CTR, r5 + mtspr SPRN_MI_EPN, r0 + mtspr SPRN_MI_TWC, r7 + mtspr SPRN_MI_RPN, r8 + addi r5, r5, 0x100 + addis r6, r6, SZ_8M@h + addis r8, r8, SZ_8M@h + cmplw r6, r9 + bdnzt lt, 2b + lis r0, MI_RSV4I@h + mtspr SPRN_MI_CTR, r0 #endif -#ifdef CONFIG_8xx_CPU6 - lis r6, cpu6_errata_word@h - ori r6, r6, cpu6_errata_word@l - tophys (r4, r4) - li r7, 0x3980 - stw r7, 12(r6) - lwz r7, 12(r6) - mtspr SPRN_M_TWB, r4 /* Update MMU base address */ - li r7, 0x3380 - stw r7, 12(r6) - lwz r7, 12(r6) - mtspr SPRN_M_CASID, r3 /* Update context */ + LOAD_REG_IMMEDIATE(r5, 28 << 8 | MD_TWAM) +#ifdef CONFIG_PIN_TLB_DATA + LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET) + LOAD_REG_IMMEDIATE(r7, MI_SVALID | MI_PS8MEG | _PMD_ACCESSED) + li r8, 0 +#ifdef CONFIG_PIN_TLB_IMMR + li r0, 3 #else - mtspr SPRN_M_CASID,r3 /* Update context */ - tophys (r4, r4) - mtspr SPRN_M_TWB, r4 /* and pgd */ + li r0, 4 #endif - SYNC - blr - -#ifdef CONFIG_8xx_CPU6 -/* It's here because it is unique to the 8xx. - * It is important we get called with interrupts disabled. I used to - * do that, but it appears that all code that calls this already had - * interrupt disabled. - */ - .globl set_dec_cpu6 -set_dec_cpu6: - lis r7, cpu6_errata_word@h - ori r7, r7, cpu6_errata_word@l - li r4, 0x2c00 - stw r4, 8(r7) - lwz r4, 8(r7) - mtspr 22, r3 /* Update Decrementer */ - SYNC - blr + mtctr r0 + cmpwi r4, 0 + beq 4f + LOAD_REG_ADDR(r9, _sinittext) + +2: ori r0, r6, MD_EVALID + ori r12, r8, 0xf0 | _PAGE_RO | _PAGE_SPS | _PAGE_SH | _PAGE_PRESENT + mtspr SPRN_MD_CTR, r5 + mtspr SPRN_MD_EPN, r0 + mtspr SPRN_MD_TWC, r7 + mtspr SPRN_MD_RPN, r12 + addi r5, r5, 0x100 + addis r6, r6, SZ_8M@h + addis r8, r8, SZ_8M@h + cmplw r6, r9 + bdnzt lt, 2b +4: +2: ori r0, r6, MD_EVALID + ori r12, r8, 0xf0 | _PAGE_DIRTY | _PAGE_SPS | _PAGE_SH | _PAGE_PRESENT + mtspr SPRN_MD_CTR, r5 + mtspr SPRN_MD_EPN, r0 + mtspr SPRN_MD_TWC, r7 + mtspr SPRN_MD_RPN, r12 + addi r5, r5, 0x100 + addis r6, r6, SZ_8M@h + addis r8, r8, SZ_8M@h + cmplw r6, r3 + bdnzt lt, 2b #endif - -/* - * We put a few things here that have to be page-aligned. - * This stuff goes at the beginning of the data segment, - * which is page-aligned. - */ - .data - .globl sdata -sdata: - .globl empty_zero_page -empty_zero_page: - .space 4096 - - .globl swapper_pg_dir -swapper_pg_dir: - .space 4096 - -/* Room for two PTE table poiners, usually the kernel and current user - * pointer to their respective root page table (pgdir). - */ -abatron_pteptrs: - .space 8 - -#ifdef CONFIG_8xx_CPU6 - .globl cpu6_errata_word -cpu6_errata_word: - .space 16 +#ifdef CONFIG_PIN_TLB_IMMR + LOAD_REG_IMMEDIATE(r0, VIRT_IMMR_BASE | MD_EVALID) + LOAD_REG_IMMEDIATE(r7, MD_SVALID | MD_PS512K | MD_GUARDED | _PMD_ACCESSED) + mfspr r8, SPRN_IMMR + rlwinm r8, r8, 0, 0xfff80000 + ori r8, r8, 0xf0 | _PAGE_DIRTY | _PAGE_SPS | _PAGE_SH | \ + _PAGE_NO_CACHE | _PAGE_PRESENT + mtspr SPRN_MD_CTR, r5 + mtspr SPRN_MD_EPN, r0 + mtspr SPRN_MD_TWC, r7 + mtspr SPRN_MD_RPN, r8 +#endif +#if defined(CONFIG_PIN_TLB_IMMR) || defined(CONFIG_PIN_TLB_DATA) + lis r0, (MD_RSV4I | MD_TWAM)@h + mtspr SPRN_MD_CTR, r0 +#endif + mtspr SPRN_SRR1, r10 + mtspr SPRN_SRR0, r11 + rfi #endif - |