diff options
Diffstat (limited to 'arch/powerpc/platforms')
29 files changed, 35 insertions, 35 deletions
diff --git a/arch/powerpc/platforms/512x/clock-commonclk.c b/arch/powerpc/platforms/512x/clock-commonclk.c index 0b03d812baae..0652c7e69225 100644 --- a/arch/powerpc/platforms/512x/clock-commonclk.c +++ b/arch/powerpc/platforms/512x/clock-commonclk.c @@ -663,7 +663,7 @@ static void __init mpc512x_clk_setup_mclk(struct mclk_setup_data *entry, size_t * the PSC/MSCAN/SPDIF (serial drivers et al) need the MCLK * for their bitrate * - in the absence of "aliases" for clocks we need to create - * individial 'struct clk' items for whatever might get + * individual 'struct clk' items for whatever might get * referenced or looked up, even if several of those items are * identical from the logical POV (their rate value) * - for easier future maintenance and for better reflection of diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c index e3411663edad..96d9cf49560d 100644 --- a/arch/powerpc/platforms/512x/mpc512x_shared.c +++ b/arch/powerpc/platforms/512x/mpc512x_shared.c @@ -289,7 +289,7 @@ static void __init mpc512x_setup_diu(void) /* * We do not allocate and configure new area for bitmap buffer - * because it would requere copying bitmap data (splash image) + * because it would require copying bitmap data (splash image) * and so negatively affect boot time. Instead we reserve the * already configured frame buffer area so that it won't be * destroyed. The starting address of the area to reserve and diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c index 565e3a83dc9e..60aa6015e284 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_common.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c @@ -308,7 +308,7 @@ int mpc5200_psc_ac97_gpio_reset(int psc_number) spin_lock_irqsave(&gpio_lock, flags); - /* Reconfiure pin-muxing to gpio */ + /* Reconfigure pin-muxing to gpio */ mux = in_be32(&simple_gpio->port_config); out_be32(&simple_gpio->port_config, mux & (~gpio)); diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c index 0cb248269db7..03e9bf7c0773 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c @@ -398,7 +398,7 @@ static int mpc52xx_gpt_do_start(struct mpc52xx_gpt_priv *gpt, u64 period, set |= MPC52xx_GPT_MODE_CONTINUOUS; /* Determine the number of clocks in the requested period. 64 bit - * arithmatic is done here to preserve the precision until the value + * arithmetic is done here to preserve the precision until the value * is scaled back down into the u32 range. Period is in 'ns', bus * frequency is in Hz. */ clocks = period * (u64)gpt->ipb_freq; diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c index b91ebebd9ff2..54dfc63809d3 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c @@ -104,7 +104,7 @@ static void mpc52xx_lpbfifo_kick(struct mpc52xx_lpbfifo_request *req) * * Configure the watermarks so DMA will always complete correctly. * It may be worth experimenting with the ALARM value to see if - * there is a performance impacit. However, if it is wrong there + * there is a performance impact. However, if it is wrong there * is a risk of DMA not transferring the last chunk of data */ if (write) { diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index 5bd487030256..ad0b88ecfd0c 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -151,7 +151,7 @@ static void __init mpc85xx_cds_pci_irq_fixup(struct pci_dev *dev) */ case PCI_DEVICE_ID_VIA_82C586_2: /* There are two USB controllers. - * Identify them by functon number + * Identify them by function number */ if (PCI_FUNC(dev->devfn) == 3) dev->irq = 11; diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c index 44bbbc535e1d..884da08806ce 100644 --- a/arch/powerpc/platforms/86xx/gef_ppc9a.c +++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c @@ -180,7 +180,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, * * This function is called to determine whether the BSP is compatible with the * supplied device-tree, which is assumed to be the correct one for the actual - * board. It is expected thati, in the future, a kernel may support multiple + * board. It is expected that, in the future, a kernel may support multiple * boards. */ static int __init gef_ppc9a_probe(void) diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c index 46d6d3d4957a..baaf1ab07016 100644 --- a/arch/powerpc/platforms/86xx/gef_sbc310.c +++ b/arch/powerpc/platforms/86xx/gef_sbc310.c @@ -167,7 +167,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, * * This function is called to determine whether the BSP is compatible with the * supplied device-tree, which is assumed to be the correct one for the actual - * board. It is expected thati, in the future, a kernel may support multiple + * board. It is expected that, in the future, a kernel may support multiple * boards. */ static int __init gef_sbc310_probe(void) diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c index acf2c6c3c1eb..120caf6af71d 100644 --- a/arch/powerpc/platforms/86xx/gef_sbc610.c +++ b/arch/powerpc/platforms/86xx/gef_sbc610.c @@ -157,7 +157,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, * * This function is called to determine whether the BSP is compatible with the * supplied device-tree, which is assumed to be the correct one for the actual - * board. It is expected thati, in the future, a kernel may support multiple + * board. It is expected that, in the future, a kernel may support multiple * boards. */ static int __init gef_sbc610_probe(void) diff --git a/arch/powerpc/platforms/book3s/vas-api.c b/arch/powerpc/platforms/book3s/vas-api.c index f9a1615b74da..c0799fb26b6d 100644 --- a/arch/powerpc/platforms/book3s/vas-api.c +++ b/arch/powerpc/platforms/book3s/vas-api.c @@ -30,7 +30,7 @@ * * where "vas_copy" and "vas_paste" are defined in copy-paste.h. * copy/paste returns to the user space directly. So refer NX hardware - * documententation for exact copy/paste usage and completion / error + * documentation for exact copy/paste usage and completion / error * conditions. */ diff --git a/arch/powerpc/platforms/cell/cbe_regs.c b/arch/powerpc/platforms/cell/cbe_regs.c index 1c4c53bec66c..03512a41bd7e 100644 --- a/arch/powerpc/platforms/cell/cbe_regs.c +++ b/arch/powerpc/platforms/cell/cbe_regs.c @@ -23,7 +23,7 @@ * Current implementation uses "cpu" nodes. We build our own mapping * array of cpu numbers to cpu nodes locally for now to allow interrupt * time code to have a fast path rather than call of_get_cpu_node(). If - * we implement cpu hotplug, we'll have to install an appropriate norifier + * we implement cpu hotplug, we'll have to install an appropriate notifier * in order to release references to the cpu going away */ static struct cbe_regs_map diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 25e726bf0172..3f141cf5e580 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -582,7 +582,7 @@ static int cell_of_bus_notify(struct notifier_block *nb, unsigned long action, { struct device *dev = data; - /* We are only intereted in device addition */ + /* We are only interested in device addition */ if (action != BUS_NOTIFY_ADD_DEVICE) return 0; diff --git a/arch/powerpc/platforms/cell/spider-pci.c b/arch/powerpc/platforms/cell/spider-pci.c index a1c293f42a1f..3a2ea8376e32 100644 --- a/arch/powerpc/platforms/cell/spider-pci.c +++ b/arch/powerpc/platforms/cell/spider-pci.c @@ -81,7 +81,7 @@ static int __init spiderpci_pci_setup_chip(struct pci_controller *phb, /* * On CellBlade, we can't know that which XDR memory is used by * kmalloc() to allocate dummy_page_va. - * In order to imporve the performance, the XDR which is used to + * In order to improve the performance, the XDR which is used to * allocate dummy_page_va is the nearest the spider-pci. * We have to select the CBE which is the nearest the spider-pci * to allocate memory from the best XDR, but I don't know that diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c index ddf8742f09a3..080ed2d2c682 100644 --- a/arch/powerpc/platforms/cell/spu_manage.c +++ b/arch/powerpc/platforms/cell/spu_manage.c @@ -457,7 +457,7 @@ static void __init init_affinity_node(int cbe) /* * Walk through each phandle in vicinity property of the spu - * (tipically two vicinity phandles per spe node) + * (typically two vicinity phandles per spe node) */ for (i = 0; i < (lenp / sizeof(phandle)); i++) { if (vic_handles[i] == avoid_ph) diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c index df89d916236d..9aded0188ce8 100644 --- a/arch/powerpc/platforms/powermac/low_i2c.c +++ b/arch/powerpc/platforms/powermac/low_i2c.c @@ -1472,7 +1472,7 @@ int __init pmac_i2c_init(void) smu_i2c_probe(); #endif - /* Now add plaform functions for some known devices */ + /* Now add platform functions for some known devices */ pmac_i2c_devscan(pmac_i2c_dev_create); return 0; diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c index 89e22c460ebf..33f7b959c810 100644 --- a/arch/powerpc/platforms/powernv/eeh-powernv.c +++ b/arch/powerpc/platforms/powernv/eeh-powernv.c @@ -390,7 +390,7 @@ static struct eeh_dev *pnv_eeh_probe(struct pci_dev *pdev) * should be blocked until PE reset. MMIO access is dropped * by hardware certainly. In order to drop PCI config requests, * one more flag (EEH_PE_CFG_RESTRICTED) is introduced, which - * will be checked in the backend for PE state retrival. If + * will be checked in the backend for PE state retrieval. If * the PE becomes frozen for the first time and the flag has * been set for the PE, we will set EEH_PE_CFG_BLOCKED for * that PE to block its config space. @@ -981,7 +981,7 @@ static int pnv_eeh_do_af_flr(struct pci_dn *pdn, int option) case EEH_RESET_FUNDAMENTAL: /* * Wait for Transaction Pending bit to clear. A word-aligned - * test is used, so we use the conrol offset rather than status + * test is used, so we use the control offset rather than status * and shift the test bit to match. */ pnv_eeh_wait_for_pending(pdn, "AF", @@ -1048,7 +1048,7 @@ static int pnv_eeh_reset(struct eeh_pe *pe, int option) * frozen state during PE reset. However, the good idea here from * benh is to keep frozen state before we get PE reset done completely * (until BAR restore). With the frozen state, HW drops illegal IO - * or MMIO access, which can incur recrusive frozen PE during PE + * or MMIO access, which can incur recursive frozen PE during PE * reset. The side effect is that EEH core has to clear the frozen * state explicitly after BAR restore. */ @@ -1095,8 +1095,8 @@ static int pnv_eeh_reset(struct eeh_pe *pe, int option) * bus is behind a hotplug slot and it will use the slot provided * reset methods to prevent spurious hotplug events during the reset. * - * Fundemental resets need to be handled internally to EEH since the - * PCI core doesn't really have a concept of a fundemental reset, + * Fundamental resets need to be handled internally to EEH since the + * PCI core doesn't really have a concept of a fundamental reset, * mainly because there's no standard way to generate one. Only a * few devices require an FRESET so it should be fine. */ diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c index a6677a111aca..6f94b808dd39 100644 --- a/arch/powerpc/platforms/powernv/idle.c +++ b/arch/powerpc/platforms/powernv/idle.c @@ -112,7 +112,7 @@ static int __init pnv_save_sprs_for_deep_states(void) if (rc != 0) return rc; - /* Only p8 needs to set extra HID regiters */ + /* Only p8 needs to set extra HID registers */ if (!cpu_has_feature(CPU_FTR_ARCH_300)) { uint64_t hid1_val = mfspr(SPRN_HID1); uint64_t hid4_val = mfspr(SPRN_HID4); @@ -1204,7 +1204,7 @@ static void __init pnv_arch300_idle_init(void) * The idle code does not deal with TB loss occurring * in a shallower state than SPR loss, so force it to * behave like SPRs are lost if TB is lost. POWER9 would - * never encouter this, but a POWER8 core would if it + * never encounter this, but a POWER8 core would if it * implemented the stop instruction. So this is for forward * compatibility. */ diff --git a/arch/powerpc/platforms/powernv/ocxl.c b/arch/powerpc/platforms/powernv/ocxl.c index 28b009b46464..27c936075031 100644 --- a/arch/powerpc/platforms/powernv/ocxl.c +++ b/arch/powerpc/platforms/powernv/ocxl.c @@ -289,7 +289,7 @@ int pnv_ocxl_get_pasid_count(struct pci_dev *dev, int *count) * be used by a function depends on how many functions exist * on the device. The NPU needs to be configured to know how * many bits are available to PASIDs and how many are to be - * used by the function BDF indentifier. + * used by the function BDF identifier. * * We only support one AFU-carrying function for now. */ diff --git a/arch/powerpc/platforms/powernv/opal-fadump.c b/arch/powerpc/platforms/powernv/opal-fadump.c index 5e147f32e932..964f464b1b0e 100644 --- a/arch/powerpc/platforms/powernv/opal-fadump.c +++ b/arch/powerpc/platforms/powernv/opal-fadump.c @@ -206,7 +206,7 @@ static u64 opal_fadump_init_mem_struct(struct fw_dump *fadump_conf) opal_fdm->region_cnt = cpu_to_be16(reg_cnt); /* - * Kernel metadata is passed to f/w and retrieved in capture kerenl. + * Kernel metadata is passed to f/w and retrieved in capture kernel. * So, use it to save fadump header address instead of calculating it. */ opal_fdm->fadumphdr_addr = cpu_to_be64(be64_to_cpu(opal_fdm->rgn[0].dest) + diff --git a/arch/powerpc/platforms/powernv/opal-lpc.c b/arch/powerpc/platforms/powernv/opal-lpc.c index 5390c888db16..d129d6d45a50 100644 --- a/arch/powerpc/platforms/powernv/opal-lpc.c +++ b/arch/powerpc/platforms/powernv/opal-lpc.c @@ -197,7 +197,7 @@ static ssize_t lpc_debug_read(struct file *filp, char __user *ubuf, /* * Select access size based on count and alignment and - * access type. IO and MEM only support byte acceses, + * access type. IO and MEM only support byte accesses, * FW supports all 3. */ len = 1; diff --git a/arch/powerpc/platforms/powernv/opal-memory-errors.c b/arch/powerpc/platforms/powernv/opal-memory-errors.c index 1e8e17df9ce8..a1754a28265d 100644 --- a/arch/powerpc/platforms/powernv/opal-memory-errors.c +++ b/arch/powerpc/platforms/powernv/opal-memory-errors.c @@ -82,7 +82,7 @@ static DECLARE_WORK(mem_error_work, mem_error_handler); /* * opal_memory_err_event - notifier handler that queues up the opal message - * to be preocessed later. + * to be processed later. */ static int opal_memory_err_event(struct notifier_block *nb, unsigned long msg_type, void *msg) diff --git a/arch/powerpc/platforms/powernv/pci-sriov.c b/arch/powerpc/platforms/powernv/pci-sriov.c index 04155aaaadb1..fe3d111b881c 100644 --- a/arch/powerpc/platforms/powernv/pci-sriov.c +++ b/arch/powerpc/platforms/powernv/pci-sriov.c @@ -699,7 +699,7 @@ static int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs) return -ENOSPC; } - /* allocate a contigious block of PEs for our VFs */ + /* allocate a contiguous block of PEs for our VFs */ base_pe = pnv_ioda_alloc_pe(phb, num_vfs); if (!base_pe) { pci_err(pdev, "Unable to allocate PEs for %d VFs\n", num_vfs); diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c index 5ce924611b94..63ef61ed7597 100644 --- a/arch/powerpc/platforms/ps3/mm.c +++ b/arch/powerpc/platforms/ps3/mm.c @@ -364,7 +364,7 @@ static void __maybe_unused _dma_dump_region(const struct ps3_dma_region *r, * @bus_addr: Starting ioc bus address of the area to map. * @len: Length in bytes of the area to map. * @link: A struct list_head used with struct ps3_dma_region.chunk_list, the - * list of all chuncks owned by the region. + * list of all chunks owned by the region. * * This implementation uses a very simple dma page manager * based on the dma_chunk structure. This scheme assumes diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c index b637bf292047..2502e9b17df4 100644 --- a/arch/powerpc/platforms/ps3/system-bus.c +++ b/arch/powerpc/platforms/ps3/system-bus.c @@ -601,7 +601,7 @@ static dma_addr_t ps3_ioc0_map_page(struct device *_dev, struct page *page, iopte_flag |= CBE_IOPTE_PP_W | CBE_IOPTE_SO_RW; break; default: - /* not happned */ + /* not happened */ BUG(); } result = ps3_dma_map(dev->d_region, (unsigned long)ptr, size, diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c index f9af879c0222..73ae91200b9f 100644 --- a/arch/powerpc/platforms/pseries/eeh_pseries.c +++ b/arch/powerpc/platforms/pseries/eeh_pseries.c @@ -512,7 +512,7 @@ static int pseries_eeh_set_option(struct eeh_pe *pe, int option) int ret = 0; /* - * When we're enabling or disabling EEH functioality on + * When we're enabling or disabling EEH functionality on * the particular PE, the PE config address is possibly * unavailable. Therefore, we have to figure it out from * the FDT node. diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index 4d991cf840d9..7639e7355df2 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -1430,7 +1430,7 @@ static bool enable_ddw(struct pci_dev *dev, struct device_node *pdn) pci->table_group->tables[1] = newtbl; - /* Keep default DMA window stuct if removed */ + /* Keep default DMA window struct if removed */ if (default_win_removed) { tbl->it_size = 0; vfree(tbl->it_map); diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 955ff8aa1644..36433bb1560d 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -658,7 +658,7 @@ static resource_size_t pseries_get_iov_fw_value(struct pci_dev *dev, int resno, */ num_res = of_read_number(&indexes[NUM_RES_PROPERTY], 1); if (resno >= num_res) - return 0; /* or an errror */ + return 0; /* or an error */ i = START_OF_ENTRIES + NEXT_ENTRY * resno; switch (value) { @@ -762,7 +762,7 @@ static void pseries_pci_fixup_iov_resources(struct pci_dev *pdev) if (!pdev->is_physfn) return; - /*Firmware must support open sriov otherwise dont configure*/ + /*Firmware must support open sriov otherwise don't configure*/ indexes = of_get_property(dn, "ibm,open-sriov-vf-bar-info", NULL); if (indexes) of_pci_parse_iov_addrs(pdev, indexes); diff --git a/arch/powerpc/platforms/pseries/vas-sysfs.c b/arch/powerpc/platforms/pseries/vas-sysfs.c index 909535ca513a..59aef6062847 100644 --- a/arch/powerpc/platforms/pseries/vas-sysfs.c +++ b/arch/powerpc/platforms/pseries/vas-sysfs.c @@ -67,7 +67,7 @@ struct vas_sysfs_entry { * Create sysfs interface: * /sys/devices/vas/vas0/gzip/default_capabilities * This directory contains the following VAS GZIP capabilities - * for the defaule credit type. + * for the default credit type. * /sys/devices/vas/vas0/gzip/default_capabilities/nr_total_credits * Total number of default credits assigned to the LPAR which * can be changed with DLPAR operation. diff --git a/arch/powerpc/platforms/pseries/vas.c b/arch/powerpc/platforms/pseries/vas.c index 1f59d78c77a1..245e0a42981a 100644 --- a/arch/powerpc/platforms/pseries/vas.c +++ b/arch/powerpc/platforms/pseries/vas.c @@ -807,7 +807,7 @@ int vas_reconfig_capabilties(u8 type) atomic_set(&caps->nr_total_credits, new_nr_creds); /* * The total number of available credits may be decreased or - * inceased with DLPAR operation. Means some windows have to be + * increased with DLPAR operation. Means some windows have to be * closed / reopened. Hold the vas_pseries_mutex so that the * the user space can not open new windows. */ |