1 files changed, 0 insertions, 293 deletions
diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
deleted file mode 100644
index 8d73c3c0bee6..000000000000
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * Interrupt controller driver for Xilinx Virtex FPGAs
- *
- * Copyright (C) 2007 Secret Lab Technologies Ltd.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- *
- */
-
-/*
- * This is a driver for the interrupt controller typically found in
- * Xilinx Virtex FPGA designs.
- *
- * The interrupt sense levels are hard coded into the FPGA design with
- * typically a 1:1 relationship between irq lines and devices (no shared
- * irq lines).  Therefore, this driver does not attempt to handle edge
- * and level interrupts differently.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/of.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/i8259.h>
-#include <asm/irq.h>
-
-/*
- * INTC Registers
- */
-#define XINTC_ISR	0	/* Interrupt Status */
-#define XINTC_IPR	4	/* Interrupt Pending */
-#define XINTC_IER	8	/* Interrupt Enable */
-#define XINTC_IAR	12	/* Interrupt Acknowledge */
-#define XINTC_SIE	16	/* Set Interrupt Enable bits */
-#define XINTC_CIE	20	/* Clear Interrupt Enable bits */
-#define XINTC_IVR	24	/* Interrupt Vector */
-#define XINTC_MER	28	/* Master Enable */
-
-static struct irq_domain *master_irqhost;
-
-#define XILINX_INTC_MAXIRQS	(32)
-
-/* The following table allows the interrupt type, edge or level,
- * to be cached after being read from the device tree until the interrupt
- * is mapped
- */
-static int xilinx_intc_typetable[XILINX_INTC_MAXIRQS];
-
-/* Map the interrupt type from the device tree to the interrupt types
- * used by the interrupt subsystem
- */
-static unsigned char xilinx_intc_map_senses[] = {
-	IRQ_TYPE_EDGE_RISING,
-	IRQ_TYPE_EDGE_FALLING,
-	IRQ_TYPE_LEVEL_HIGH,
-	IRQ_TYPE_LEVEL_LOW,
-};
-
-/*
- * The interrupt controller is setup such that it doesn't work well with
- * the level interrupt handler in the kernel because the handler acks the
- * interrupt before calling the application interrupt handler. To deal with
- * that, we use 2 different irq chips so that different functions can be
- * used for level and edge type interrupts.
- *
- * IRQ Chip common (across level and edge) operations
- */
-static void xilinx_intc_mask(struct irq_data *d)
-{
-	int irq = irqd_to_hwirq(d);
-	void * regs = irq_data_get_irq_chip_data(d);
-	pr_debug("mask: %d\n", irq);
-	out_be32(regs + XINTC_CIE, 1 << irq);
-}
-
-static int xilinx_intc_set_type(struct irq_data *d, unsigned int flow_type)
-{
-	return 0;
-}
-
-/*
- * IRQ Chip level operations
- */
-static void xilinx_intc_level_unmask(struct irq_data *d)
-{
-	int irq = irqd_to_hwirq(d);
-	void * regs = irq_data_get_irq_chip_data(d);
-	pr_debug("unmask: %d\n", irq);
-	out_be32(regs + XINTC_SIE, 1 << irq);
-
-	/* ack level irqs because they can't be acked during
-	 * ack function since the handle_level_irq function
-	 * acks the irq before calling the inerrupt handler
-	 */
-	out_be32(regs + XINTC_IAR, 1 << irq);
-}
-
-static struct irq_chip xilinx_intc_level_irqchip = {
-	.name = "Xilinx Level INTC",
-	.irq_mask = xilinx_intc_mask,
-	.irq_mask_ack = xilinx_intc_mask,
-	.irq_unmask = xilinx_intc_level_unmask,
-	.irq_set_type = xilinx_intc_set_type,
-};
-
-/*
- * IRQ Chip edge operations
- */
-static void xilinx_intc_edge_unmask(struct irq_data *d)
-{
-	int irq = irqd_to_hwirq(d);
-	void *regs = irq_data_get_irq_chip_data(d);
-	pr_debug("unmask: %d\n", irq);
-	out_be32(regs + XINTC_SIE, 1 << irq);
-}
-
-static void xilinx_intc_edge_ack(struct irq_data *d)
-{
-	int irq = irqd_to_hwirq(d);
-	void * regs = irq_data_get_irq_chip_data(d);
-	pr_debug("ack: %d\n", irq);
-	out_be32(regs + XINTC_IAR, 1 << irq);
-}
-
-static struct irq_chip xilinx_intc_edge_irqchip = {
-	.name = "Xilinx Edge  INTC",
-	.irq_mask = xilinx_intc_mask,
-	.irq_unmask = xilinx_intc_edge_unmask,
-	.irq_ack = xilinx_intc_edge_ack,
-	.irq_set_type = xilinx_intc_set_type,
-};
-
-/*
- * IRQ Host operations
- */
-
-/**
- * xilinx_intc_xlate - translate virq# from device tree interrupts property
- */
-static int xilinx_intc_xlate(struct irq_domain *h, struct device_node *ct,
-				const u32 *intspec, unsigned int intsize,
-				irq_hw_number_t *out_hwirq,
-				unsigned int *out_flags)
-{
-	if ((intsize < 2) || (intspec[0] >= XILINX_INTC_MAXIRQS))
-		return -EINVAL;
-
-	/* keep a copy of the interrupt type til the interrupt is mapped
-	 */
-	xilinx_intc_typetable[intspec[0]] = xilinx_intc_map_senses[intspec[1]];
-
-	/* Xilinx uses 2 interrupt entries, the 1st being the h/w
-	 * interrupt number, the 2nd being the interrupt type, edge or level
-	 */
-	*out_hwirq = intspec[0];
-	*out_flags = xilinx_intc_map_senses[intspec[1]];
-
-	return 0;
-}
-static int xilinx_intc_map(struct irq_domain *h, unsigned int virq,
-				  irq_hw_number_t irq)
-{
-	irq_set_chip_data(virq, h->host_data);
-
-	if (xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_HIGH ||
-	    xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_LOW) {
-		irq_set_chip_and_handler(virq, &xilinx_intc_level_irqchip,
-					 handle_level_irq);
-	} else {
-		irq_set_chip_and_handler(virq, &xilinx_intc_edge_irqchip,
-					 handle_edge_irq);
-	}
-	return 0;
-}
-
-static struct irq_domain_ops xilinx_intc_ops = {
-	.map = xilinx_intc_map,
-	.xlate = xilinx_intc_xlate,
-};
-
-struct irq_domain * __init
-xilinx_intc_init(struct device_node *np)
-{
-	struct irq_domain * irq;
-	void * regs;
-
-	/* Find and map the intc registers */
-	regs = of_iomap(np, 0);
-	if (!regs) {
-		pr_err("xilinx_intc: could not map registers\n");
-		return NULL;
-	}
-
-	/* Setup interrupt controller */
-	out_be32(regs + XINTC_IER, 0); /* disable all irqs */
-	out_be32(regs + XINTC_IAR, ~(u32) 0); /* Acknowledge pending irqs */
-	out_be32(regs + XINTC_MER, 0x3UL); /* Turn on the Master Enable. */
-
-	/* Allocate and initialize an irq_domain structure. */
-	irq = irq_domain_add_linear(np, XILINX_INTC_MAXIRQS, &xilinx_intc_ops,
-				    regs);
-	if (!irq)
-		panic(__FILE__ ": Cannot allocate IRQ host\n");
-
-	return irq;
-}
-
-int xilinx_intc_get_irq(void)
-{
-	void * regs = master_irqhost->host_data;
-	pr_debug("get_irq:\n");
-	return irq_linear_revmap(master_irqhost, in_be32(regs + XINTC_IVR));
-}
-
-#if defined(CONFIG_PPC_I8259)
-/*
- * Support code for cascading to 8259 interrupt controllers
- */
-static void xilinx_i8259_cascade(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	unsigned int cascade_irq = i8259_irq();
-
-	if (cascade_irq)
-		generic_handle_irq(cascade_irq);
-
-	/* Let xilinx_intc end the interrupt */
-	chip->irq_unmask(&desc->irq_data);
-}
-
-static void __init xilinx_i8259_setup_cascade(void)
-{
-	struct device_node *cascade_node;
-	int cascade_irq;
-
-	/* Initialize i8259 controller */
-	cascade_node = of_find_compatible_node(NULL, NULL, "chrp,iic");
-	if (!cascade_node)
-		return;
-
-	cascade_irq = irq_of_parse_and_map(cascade_node, 0);
-	if (!cascade_irq) {
-		pr_err("virtex_ml510: Failed to map cascade interrupt\n");
-		goto out;
-	}
-
-	i8259_init(cascade_node, 0);
-	irq_set_chained_handler(cascade_irq, xilinx_i8259_cascade);
-
-	/* Program irq 7 (usb/audio), 14/15 (ide) to level sensitive */
-	/* This looks like a dirty hack to me --gcl */
-	outb(0xc0, 0x4d0);
-	outb(0xc0, 0x4d1);
-
- out:
-	of_node_put(cascade_node);
-}
-#else
-static inline void xilinx_i8259_setup_cascade(void) { return; }
-#endif /* defined(CONFIG_PPC_I8259) */
-
-static struct of_device_id xilinx_intc_match[] __initconst = {
-	{ .compatible = "xlnx,opb-intc-1.00.c", },
-	{ .compatible = "xlnx,xps-intc-1.00.a", },
-	{}
-};
-
-/*
- * Initialize master Xilinx interrupt controller
- */
-void __init xilinx_intc_init_tree(void)
-{
-	struct device_node *np;
-
-	/* find top level interrupt controller */
-	for_each_matching_node(np, xilinx_intc_match) {
-		if (!of_get_property(np, "interrupts", NULL))
-			break;
-	}
-	BUG_ON(!np);
-
-	master_irqhost = xilinx_intc_init(np);
-	BUG_ON(!master_irqhost);
-
-	irq_set_default_host(master_irqhost);
-	of_node_put(np);
-
-	xilinx_i8259_setup_cascade();
-}