diff options
Diffstat (limited to 'arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts')
| -rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts | 97 |
1 files changed, 97 insertions, 0 deletions
diff --git a/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts b/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts new file mode 100644 index 000000000000..d8db9ed4474d --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2024 DeepComputing (HK) Limited + */ + +/dts-v1/; +#include "jh7110-common.dtsi" + +/ { + model = "DeepComputing FML13V01"; + compatible = "deepcomputing,fml13v01", "starfive,jh7110"; +}; + +&mmc0 { + cap-mmc-highspeed; + cap-mmc-hw-reset; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&emmc_vdd>; +}; + +&mmc0_pins { + rst-pins { + pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST, + GPOEN_ENABLE, + GPI_NONE)>; + bias-pull-up; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; +}; + +&mmc1 { + cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>; + disable-wp; +}; + +&pcie1 { + perst-gpios = <&sysgpio 21 GPIO_ACTIVE_LOW>; + phys = <&pciephy1>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_pins>; + status = "okay"; +}; + +&sysgpio { + pcie1_pins: pcie1-0 { + clkreq-pins { + pinmux = <GPIOMUX(29, GPOUT_LOW, + GPOEN_DISABLE, + GPI_NONE)>; + bias-pull-down; + drive-strength = <2>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + + wake-pins { + pinmux = <GPIOMUX(28, GPOUT_HIGH, + GPOEN_DISABLE, + GPI_NONE)>; + bias-pull-up; + drive-strength = <2>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; + + usb0_pins: usb0-0 { + vbus-pins { + pinmux = <GPIOMUX(25, GPOUT_SYS_USB_DRIVE_VBUS, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; +}; + +&usb0 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; + status = "okay"; +}; + +&usb_cdns3 { + phys = <&usbphy0>, <&pciephy0>; + phy-names = "cdns3,usb2-phy", "cdns3,usb3-phy"; +}; |
