diff options
Diffstat (limited to 'arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts')
| -rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts | 57 |
1 files changed, 50 insertions, 7 deletions
diff --git a/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts index 0d248b671d4b..21873612d993 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts +++ b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts @@ -12,9 +12,9 @@ }; &gmac0 { - starfive,tx-use-rgmii-clk; assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>; assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>; + starfive,tx-use-rgmii-clk; status = "okay"; }; @@ -22,6 +22,33 @@ status = "okay"; }; +&mmc0 { + cap-mmc-highspeed; + cap-mmc-hw-reset; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&emmc_vdd>; +}; + +&mmc0_pins { + rst-pins { + pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST, + GPOEN_ENABLE, + GPI_NONE)>; + bias-pull-up; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; +}; + +&mmc1 { + cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>; + disable-wp; +}; + &pcie0 { status = "okay"; }; @@ -31,14 +58,14 @@ }; &phy0 { - motorcomm,tx-clk-adj-enabled; + rx-internal-delay-ps = <1500>; + tx-internal-delay-ps = <1500>; + motorcomm,rx-clk-drv-microamp = <3970>; + motorcomm,rx-data-drv-microamp = <2910>; motorcomm,tx-clk-10-inverted; motorcomm,tx-clk-100-inverted; motorcomm,tx-clk-1000-inverted; - motorcomm,rx-clk-drv-microamp = <3970>; - motorcomm,rx-data-drv-microamp = <2910>; - rx-internal-delay-ps = <1500>; - tx-internal-delay-ps = <1500>; + motorcomm,tx-clk-adj-enabled; }; &pwm { @@ -53,7 +80,23 @@ status = "okay"; }; +&sysgpio { + usb0_pins: usb0-0 { + vbus-pins { + pinmux = <GPIOMUX(25, GPOUT_SYS_USB_DRIVE_VBUS, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; +}; + &usb0 { - dr_mode = "peripheral"; + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; status = "okay"; }; |