diff options
Diffstat (limited to 'arch/sh/boards/Kconfig')
| -rw-r--r-- | arch/sh/boards/Kconfig | 66 |
1 files changed, 25 insertions, 41 deletions
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index 3554fcaa023b..1af93be61b1f 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 menu "Board support" config SOLUTION_ENGINE @@ -6,28 +7,25 @@ config SOLUTION_ENGINE config SH_ALPHA_BOARD bool +config SH_CUSTOM_CLK + def_bool y + depends on !SH_DEVICE_TREE + select HAVE_LEGACY_CLK + config SH_DEVICE_TREE - bool "Board Described by Device Tree" + bool select OF select OF_EARLY_FLATTREE select TIMER_OF select COMMON_CLK select GENERIC_CALIBRATE_DELAY - help - Select Board Described by Device Tree to build a kernel that - does not hard-code any board-specific knowledge but instead uses - a device tree blob provided by the boot-loader. You must enable - drivers for any hardware you want to use separately. At this - time, only boards based on the open-hardware J-Core processors - have sufficient driver coverage to use this option; do not - select it if you are using original SuperH hardware. config SH_JCORE_SOC bool "J-Core SoC" - depends on SH_DEVICE_TREE && (CPU_SH2 || CPU_J2) + select SH_DEVICE_TREE select CLKSRC_JCORE_PIT select JCORE_AIC - default y if CPU_J2 + depends on CPU_J2 help Select this option to include drivers core components of the J-Core SoC, including interrupt controllers and timers. @@ -82,8 +80,8 @@ config SH_7724_SOLUTION_ENGINE select SOLUTION_ENGINE depends on CPU_SUBTYPE_SH7724 select GPIOLIB - select SND_SOC_AK4642 if SND_SIMPLE_CARD select REGULATOR_FIXED_VOLTAGE if REGULATOR + imply SND_SOC_AK4642 if SND_SIMPLE_CARD help Select 7724 SolutionEngine if configuring for a Hitachi SH7724 evaluation board. @@ -100,7 +98,7 @@ config SH_7751_SOLUTION_ENGINE config SH_7780_SOLUTION_ENGINE bool "SolutionEngine7780" select SOLUTION_ENGINE - select SYS_SUPPORTS_PCI + select HAVE_PCI depends on CPU_SUBTYPE_SH7780 help Select 7780 SolutionEngine if configuring for a Renesas SH7780 @@ -128,7 +126,7 @@ config SH_HP6XX config SH_DREAMCAST bool "Dreamcast" - select SYS_SUPPORTS_PCI + select HAVE_PCI depends on CPU_SUBTYPE_SH7091 help Select Dreamcast if configuring for a SEGA Dreamcast. @@ -138,7 +136,7 @@ config SH_SH03 bool "Interface CTP/PCI-SH03" depends on CPU_SUBTYPE_SH7751 select CPU_HAS_IPR_IRQ - select SYS_SUPPORTS_PCI + select HAVE_PCI help CTP/PCI-SH03 is a CPU module computer that is produced by Interface Corporation. @@ -148,7 +146,7 @@ config SH_SECUREEDGE5410 bool "SecureEdge5410" depends on CPU_SUBTYPE_SH7751R select CPU_HAS_IPR_IRQ - select SYS_SUPPORTS_PCI + select HAVE_PCI help Select SecureEdge5410 if configuring for a SnapGear SH board. This includes both the OEM SecureEdge products as well as the @@ -157,7 +155,7 @@ config SH_SECUREEDGE5410 config SH_RTS7751R2D bool "RTS7751R2D" depends on CPU_SUBTYPE_SH7751R - select SYS_SUPPORTS_PCI + select HAVE_PCI select IO_TRAPPED if MMU help Select RTS7751R2D if configuring for a Renesas Technology @@ -175,7 +173,7 @@ config SH_RSK config SH_SDK7780 bool "SDK7780R3" depends on CPU_SUBTYPE_SH7780 - select SYS_SUPPORTS_PCI + select HAVE_PCI help Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3 evaluation board. @@ -183,7 +181,7 @@ config SH_SDK7780 config SH_SDK7786 bool "SDK7786" depends on CPU_SUBTYPE_SH7786 - select SYS_SUPPORTS_PCI + select HAVE_PCI select NO_IOPORT_MAP if !PCI select HAVE_SRAM_POOL select REGULATOR_FIXED_VOLTAGE if REGULATOR @@ -194,7 +192,7 @@ config SH_SDK7786 config SH_HIGHLANDER bool "Highlander" depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 - select SYS_SUPPORTS_PCI + select HAVE_PCI select IO_TRAPPED if MMU config SH_SH7757LCR @@ -206,7 +204,7 @@ config SH_SH7757LCR config SH_SH7785LCR bool "SH7785LCR" depends on CPU_SUBTYPE_SH7785 - select SYS_SUPPORTS_PCI + select HAVE_PCI config SH_SH7785LCR_29BIT_PHYSMAPS bool "SH7785LCR 29bit physmaps" @@ -228,7 +226,7 @@ config SH_URQUELL bool "Urquell" depends on CPU_SUBTYPE_SH7786 select GPIOLIB - select SYS_SUPPORTS_PCI + select HAVE_PCI select NO_IOPORT_MAP if !PCI config SH_MIGOR @@ -261,8 +259,8 @@ config SH_ECOVEC bool "EcoVec" depends on CPU_SUBTYPE_SH7724 select GPIOLIB - select SND_SOC_DA7210 if SND_SIMPLE_CARD select REGULATOR_FIXED_VOLTAGE if REGULATOR + imply SND_SOC_DA7210 if SND_SIMPLE_CARD help Renesas "R0P7724LC0011/21RL (EcoVec)" support. @@ -291,17 +289,10 @@ config SH_EDOSK7760 Select if configuring for a Renesas EDOSK7760 evaluation board. -config SH_SH4202_MICRODEV - bool "SH4-202 MicroDev" - depends on CPU_SUBTYPE_SH4_202 - help - Select SH4-202 MicroDev if configuring for a SuperH MicroDev board - with an SH4-202 CPU. - config SH_LANDISK bool "LANDISK" depends on CPU_SUBTYPE_SH7751R - select SYS_SUPPORTS_PCI + select HAVE_PCI help I-O DATA DEVICE, INC. "LANDISK Series" support. @@ -309,7 +300,7 @@ config SH_TITAN bool "TITAN" depends on CPU_SUBTYPE_SH7751R select CPU_HAS_IPR_IRQ - select SYS_SUPPORTS_PCI + select HAVE_PCI help Select Titan if you are configuring for a Nimble Microsystems NetEngine NP51R. @@ -324,7 +315,7 @@ config SH_SHMIN config SH_LBOX_RE2 bool "L-BOX RE2" depends on CPU_SUBTYPE_SH7751R - select SYS_SUPPORTS_PCI + select HAVE_PCI help Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2. @@ -342,12 +333,6 @@ config SH_MAGIC_PANEL_R2 help Select Magic Panel R2 if configuring for Magic Panel R2. -config SH_CAYMAN - bool "Hitachi Cayman" - depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103 - select SYS_SUPPORTS_PCI - select ARCH_MIGHT_HAVE_PC_SERIO - config SH_POLARIS bool "SMSC Polaris" select CPU_HAS_IPR_IRQ @@ -366,7 +351,6 @@ config SH_SH2007 intended for embedded applications. It has an Ethernet interface (SMC9118), direct connected Compact Flash socket, two serial ports and PC-104 bus. - More information at <http://sh2000.sh-linux.org>. config SH_APSH4A3A bool "AP-SH4A-3A" @@ -379,7 +363,7 @@ config SH_APSH4A3A config SH_APSH4AD0A bool "AP-SH4AD-0A" select SH_ALPHA_BOARD - select SYS_SUPPORTS_PCI + select HAVE_PCI select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7786 help |