diff options
Diffstat (limited to 'arch/tile/include/asm/processor.h')
| -rw-r--r-- | arch/tile/include/asm/processor.h | 365 |
1 files changed, 0 insertions, 365 deletions
diff --git a/arch/tile/include/asm/processor.h b/arch/tile/include/asm/processor.h deleted file mode 100644 index b3f104953da2..000000000000 --- a/arch/tile/include/asm/processor.h +++ /dev/null @@ -1,365 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_PROCESSOR_H -#define _ASM_TILE_PROCESSOR_H - -#ifndef __ASSEMBLY__ - -/* - * NOTE: we don't include <linux/ptrace.h> or <linux/percpu.h> as one - * normally would, due to #include dependencies. - */ -#include <linux/types.h> -#include <asm/ptrace.h> -#include <asm/percpu.h> - -#include <arch/chip.h> -#include <arch/spr_def.h> - -struct task_struct; -struct thread_struct; - -typedef struct { - unsigned long seg; -} mm_segment_t; - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -void *current_text_addr(void); - -#if CHIP_HAS_TILE_DMA() -/* Capture the state of a suspended DMA. */ -struct tile_dma_state { - int enabled; - unsigned long src; - unsigned long dest; - unsigned long strides; - unsigned long chunk_size; - unsigned long src_chunk; - unsigned long dest_chunk; - unsigned long byte; - unsigned long status; -}; - -/* - * A mask of the DMA status register for selecting only the 'running' - * and 'done' bits. - */ -#define DMA_STATUS_MASK \ - (SPR_DMA_STATUS__RUNNING_MASK | SPR_DMA_STATUS__DONE_MASK) -#endif - -/* - * Track asynchronous TLB events (faults and access violations) - * that occur while we are in kernel mode from DMA or the SN processor. - */ -struct async_tlb { - short fault_num; /* original fault number; 0 if none */ - char is_fault; /* was it a fault (vs an access violation) */ - char is_write; /* for fault: was it caused by a write? */ - unsigned long address; /* what address faulted? */ -}; - -#ifdef CONFIG_HARDWALL -struct hardwall_info; -struct hardwall_task { - /* Which hardwall is this task tied to? (or NULL if none) */ - struct hardwall_info *info; - /* Chains this task into the list at info->task_head. */ - struct list_head list; -}; -#ifdef __tilepro__ -#define HARDWALL_TYPES 1 /* udn */ -#else -#define HARDWALL_TYPES 3 /* udn, idn, and ipi */ -#endif -#endif - -struct thread_struct { - /* kernel stack pointer */ - unsigned long ksp; - /* kernel PC */ - unsigned long pc; - /* starting user stack pointer (for page migration) */ - unsigned long usp0; - /* pid of process that created this one */ - pid_t creator_pid; -#if CHIP_HAS_TILE_DMA() - /* DMA info for suspended threads (byte == 0 means no DMA state) */ - struct tile_dma_state tile_dma_state; -#endif - /* User EX_CONTEXT registers */ - unsigned long ex_context[2]; - /* User SYSTEM_SAVE registers */ - unsigned long system_save[4]; - /* User interrupt mask */ - unsigned long long interrupt_mask; - /* User interrupt-control 0 state */ - unsigned long intctrl_0; -#if CHIP_HAS_PROC_STATUS_SPR() - /* Any other miscellaneous processor state bits */ - unsigned long proc_status; -#endif -#if !CHIP_HAS_FIXED_INTVEC_BASE() - /* Interrupt base for PL0 interrupts */ - unsigned long interrupt_vector_base; -#endif -#if CHIP_HAS_TILE_RTF_HWM() - /* Tile cache retry fifo high-water mark */ - unsigned long tile_rtf_hwm; -#endif -#if CHIP_HAS_DSTREAM_PF() - /* Data stream prefetch control */ - unsigned long dstream_pf; -#endif -#ifdef CONFIG_HARDWALL - /* Hardwall information for various resources. */ - struct hardwall_task hardwall[HARDWALL_TYPES]; -#endif -#if CHIP_HAS_TILE_DMA() - /* Async DMA TLB fault information */ - struct async_tlb dma_async_tlb; -#endif -#if CHIP_HAS_SN_PROC() - /* Was static network processor when we were switched out? */ - int sn_proc_running; - /* Async SNI TLB fault information */ - struct async_tlb sn_async_tlb; -#endif -}; - -#endif /* !__ASSEMBLY__ */ - -/* - * Start with "sp" this many bytes below the top of the kernel stack. - * This preserves the invariant that a called function may write to *sp. - */ -#define STACK_TOP_DELTA 8 - -/* - * When entering the kernel via a fault, start with the top of the - * pt_regs structure this many bytes below the top of the page. - * This aligns the pt_regs structure optimally for cache-line access. - */ -#ifdef __tilegx__ -#define KSTK_PTREGS_GAP 48 -#else -#define KSTK_PTREGS_GAP 56 -#endif - -#ifndef __ASSEMBLY__ - -#ifdef __tilegx__ -#define TASK_SIZE_MAX (MEM_LOW_END + 1) -#else -#define TASK_SIZE_MAX PAGE_OFFSET -#endif - -/* TASK_SIZE and related variables are always checked in "current" context. */ -#ifdef CONFIG_COMPAT -#define COMPAT_TASK_SIZE (1UL << 31) -#define TASK_SIZE ((current_thread_info()->status & TS_COMPAT) ?\ - COMPAT_TASK_SIZE : TASK_SIZE_MAX) -#else -#define TASK_SIZE TASK_SIZE_MAX -#endif - -/* We provide a minimal "vdso" a la x86; just the sigreturn code for now. */ -#define VDSO_BASE (TASK_SIZE - PAGE_SIZE) - -#define STACK_TOP VDSO_BASE - -/* STACK_TOP_MAX is used temporarily in execve and should not check COMPAT. */ -#define STACK_TOP_MAX TASK_SIZE_MAX - -/* - * This decides where the kernel will search for a free chunk of vm - * space during mmap's, if it is using bottom-up mapping. - */ -#define TASK_UNMAPPED_BASE (PAGE_ALIGN(TASK_SIZE / 3)) - -#define HAVE_ARCH_PICK_MMAP_LAYOUT - -#define INIT_THREAD { \ - .ksp = (unsigned long)init_stack + THREAD_SIZE - STACK_TOP_DELTA, \ - .interrupt_mask = -1ULL \ -} - -/* Kernel stack top for the task that first boots on this cpu. */ -DECLARE_PER_CPU(unsigned long, boot_sp); - -/* PC to boot from on this cpu. */ -DECLARE_PER_CPU(unsigned long, boot_pc); - -/* Do necessary setup to start up a newly executed thread. */ -static inline void start_thread(struct pt_regs *regs, - unsigned long pc, unsigned long usp) -{ - regs->pc = pc; - regs->sp = usp; - single_step_execve(); -} - -/* Free all resources held by a thread. */ -static inline void release_thread(struct task_struct *dead_task) -{ - /* Nothing for now */ -} - -extern int do_work_pending(struct pt_regs *regs, u32 flags); - - -/* - * Return saved (kernel) PC of a blocked thread. - * Only used in a printk() in kernel/sched/core.c, so don't work too hard. - */ -#define thread_saved_pc(t) ((t)->thread.pc) - -unsigned long get_wchan(struct task_struct *p); - -/* Return initial ksp value for given task. */ -#define task_ksp0(task) ((unsigned long)(task)->stack + THREAD_SIZE) - -/* Return some info about the user process TASK. */ -#define KSTK_TOP(task) (task_ksp0(task) - STACK_TOP_DELTA) -#define task_pt_regs(task) \ - ((struct pt_regs *)(task_ksp0(task) - KSTK_PTREGS_GAP) - 1) -#define current_pt_regs() \ - ((struct pt_regs *)((stack_pointer | (THREAD_SIZE - 1)) - \ - (KSTK_PTREGS_GAP - 1)) - 1) -#define task_sp(task) (task_pt_regs(task)->sp) -#define task_pc(task) (task_pt_regs(task)->pc) -/* Aliases for pc and sp (used in fs/proc/array.c) */ -#define KSTK_EIP(task) task_pc(task) -#define KSTK_ESP(task) task_sp(task) - -/* Standard format for printing registers and other word-size data. */ -#ifdef __tilegx__ -# define REGFMT "0x%016lx" -#else -# define REGFMT "0x%08lx" -#endif - -/* - * Do some slow action (e.g. read a slow SPR). - * Note that this must also have compiler-barrier semantics since - * it may be used in a busy loop reading memory. - */ -static inline void cpu_relax(void) -{ - __insn_mfspr(SPR_PASS); - barrier(); -} - -/* Info on this processor (see fs/proc/cpuinfo.c) */ -struct seq_operations; -extern const struct seq_operations cpuinfo_op; - -/* Provide information about the chip model. */ -extern char chip_model[64]; - -/* Data on which physical memory controller corresponds to which NUMA node. */ -extern int node_controller[]; - -#if CHIP_HAS_CBOX_HOME_MAP() -/* Does the heap allocator return hash-for-home pages by default? */ -extern int hash_default; - -/* Should kernel stack pages be hash-for-home? */ -extern int kstack_hash; - -/* Does MAP_ANONYMOUS return hash-for-home pages by default? */ -#define uheap_hash hash_default - -#else -#define hash_default 0 -#define kstack_hash 0 -#define uheap_hash 0 -#endif - -/* Are we using huge pages in the TLB for kernel data? */ -extern int kdata_huge; - -/* Support standard Linux prefetching. */ -#define ARCH_HAS_PREFETCH -#define prefetch(x) __builtin_prefetch(x) -#define PREFETCH_STRIDE CHIP_L2_LINE_SIZE() - -/* Bring a value into the L1D, faulting the TLB if necessary. */ -#ifdef __tilegx__ -#define prefetch_L1(x) __insn_prefetch_l1_fault((void *)(x)) -#else -#define prefetch_L1(x) __insn_prefetch_L1((void *)(x)) -#endif - -#else /* __ASSEMBLY__ */ - -/* Do some slow action (e.g. read a slow SPR). */ -#define CPU_RELAX mfspr zero, SPR_PASS - -#endif /* !__ASSEMBLY__ */ - -/* Assembly code assumes that the PL is in the low bits. */ -#if SPR_EX_CONTEXT_1_1__PL_SHIFT != 0 -# error Fix assembly assumptions about PL -#endif - -/* We sometimes use these macros for EX_CONTEXT_0_1 as well. */ -#if SPR_EX_CONTEXT_1_1__PL_SHIFT != SPR_EX_CONTEXT_0_1__PL_SHIFT || \ - SPR_EX_CONTEXT_1_1__PL_RMASK != SPR_EX_CONTEXT_0_1__PL_RMASK || \ - SPR_EX_CONTEXT_1_1__ICS_SHIFT != SPR_EX_CONTEXT_0_1__ICS_SHIFT || \ - SPR_EX_CONTEXT_1_1__ICS_RMASK != SPR_EX_CONTEXT_0_1__ICS_RMASK -# error Fix assumptions that EX1 macros work for both PL0 and PL1 -#endif - -/* Allow pulling apart and recombining the PL and ICS bits in EX_CONTEXT. */ -#define EX1_PL(ex1) \ - (((ex1) >> SPR_EX_CONTEXT_1_1__PL_SHIFT) & SPR_EX_CONTEXT_1_1__PL_RMASK) -#define EX1_ICS(ex1) \ - (((ex1) >> SPR_EX_CONTEXT_1_1__ICS_SHIFT) & SPR_EX_CONTEXT_1_1__ICS_RMASK) -#define PL_ICS_EX1(pl, ics) \ - (((pl) << SPR_EX_CONTEXT_1_1__PL_SHIFT) | \ - ((ics) << SPR_EX_CONTEXT_1_1__ICS_SHIFT)) - -/* - * Provide symbolic constants for PLs. - * Note that assembly code assumes that USER_PL is zero. - */ -#define USER_PL 0 -#if CONFIG_KERNEL_PL == 2 -#define GUEST_PL 1 -#endif -#define KERNEL_PL CONFIG_KERNEL_PL - -/* SYSTEM_SAVE_K_0 holds the current cpu number ORed with ksp0. */ -#define CPU_LOG_MASK_VALUE 12 -#define CPU_MASK_VALUE ((1 << CPU_LOG_MASK_VALUE) - 1) -#if CONFIG_NR_CPUS > CPU_MASK_VALUE -# error Too many cpus! -#endif -#define raw_smp_processor_id() \ - ((int)__insn_mfspr(SPR_SYSTEM_SAVE_K_0) & CPU_MASK_VALUE) -#define get_current_ksp0() \ - (__insn_mfspr(SPR_SYSTEM_SAVE_K_0) & ~CPU_MASK_VALUE) -#define next_current_ksp0(task) ({ \ - unsigned long __ksp0 = task_ksp0(task); \ - int __cpu = raw_smp_processor_id(); \ - BUG_ON(__ksp0 & CPU_MASK_VALUE); \ - __ksp0 | __cpu; \ -}) - -#endif /* _ASM_TILE_PROCESSOR_H */ |