diff options
Diffstat (limited to 'arch/x86/include/asm/intel-mid.h')
| -rw-r--r-- | arch/x86/include/asm/intel-mid.h | 160 |
1 files changed, 3 insertions, 157 deletions
diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h index fe04491130ae..a3abdcd89a32 100644 --- a/arch/x86/include/asm/intel-mid.h +++ b/arch/x86/include/asm/intel-mid.h @@ -1,19 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* - * intel-mid.h: Intel MID specific setup code + * Intel MID specific setup code * - * (C) Copyright 2009 Intel Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; version 2 - * of the License. + * (C) Copyright 2009, 2021 Intel Corporation */ #ifndef _ASM_X86_INTEL_MID_H #define _ASM_X86_INTEL_MID_H -#include <linux/sfi.h> #include <linux/pci.h> -#include <linux/platform_device.h> extern int intel_mid_pci_init(void); extern int intel_mid_pci_set_power_state(struct pci_dev *pdev, pci_power_t state); @@ -26,152 +20,4 @@ extern void intel_mid_pwr_power_off(void); extern int intel_mid_pwr_get_lss_id(struct pci_dev *pdev); -extern int get_gpio_by_name(const char *name); -extern int __init sfi_parse_mrtc(struct sfi_table_header *table); -extern int __init sfi_parse_mtmr(struct sfi_table_header *table); -extern int sfi_mrtc_num; -extern struct sfi_rtc_table_entry sfi_mrtc_array[]; - -/* - * Here defines the array of devices platform data that IAFW would export - * through SFI "DEVS" table, we use name and type to match the device and - * its platform data. - */ -struct devs_id { - char name[SFI_NAME_LEN + 1]; - u8 type; - u8 delay; - u8 msic; - void *(*get_platform_data)(void *info); -}; - -#define sfi_device(i) \ - static const struct devs_id *const __intel_mid_sfi_##i##_dev __used \ - __attribute__((__section__(".x86_intel_mid_dev.init"))) = &i - -/** -* struct mid_sd_board_info - template for SD device creation -* @name: identifies the driver -* @bus_num: board-specific identifier for a given SD controller -* @max_clk: the maximum frequency device supports -* @platform_data: the particular data stored there is driver-specific -*/ -struct mid_sd_board_info { - char name[SFI_NAME_LEN]; - int bus_num; - unsigned short addr; - u32 max_clk; - void *platform_data; -}; - -/* - * Medfield is the follow-up of Moorestown, it combines two chip solution into - * one. Other than that it also added always-on and constant tsc and lapic - * timers. Medfield is the platform name, and the chip name is called Penwell - * we treat Medfield/Penwell as a variant of Moorestown. Penwell can be - * identified via MSRs. - */ -enum intel_mid_cpu_type { - /* 1 was Moorestown */ - INTEL_MID_CPU_CHIP_PENWELL = 2, - INTEL_MID_CPU_CHIP_CLOVERVIEW, - INTEL_MID_CPU_CHIP_TANGIER, -}; - -extern enum intel_mid_cpu_type __intel_mid_cpu_chip; - -/** - * struct intel_mid_ops - Interface between intel-mid & sub archs - * @arch_setup: arch_setup function to re-initialize platform - * structures (x86_init, x86_platform_init) - * - * This structure can be extended if any new interface is required - * between intel-mid & its sub arch files. - */ -struct intel_mid_ops { - void (*arch_setup)(void); -}; - -/* Helper API's for INTEL_MID_OPS_INIT */ -#define DECLARE_INTEL_MID_OPS_INIT(cpuname, cpuid) \ - [cpuid] = get_##cpuname##_ops - -/* Maximum number of CPU ops */ -#define MAX_CPU_OPS(a) (sizeof(a)/sizeof(void *)) - -/* - * For every new cpu addition, a weak get_<cpuname>_ops() function needs be - * declared in arch/x86/platform/intel_mid/intel_mid_weak_decls.h. - */ -#define INTEL_MID_OPS_INIT { \ - DECLARE_INTEL_MID_OPS_INIT(penwell, INTEL_MID_CPU_CHIP_PENWELL), \ - DECLARE_INTEL_MID_OPS_INIT(cloverview, INTEL_MID_CPU_CHIP_CLOVERVIEW), \ - DECLARE_INTEL_MID_OPS_INIT(tangier, INTEL_MID_CPU_CHIP_TANGIER) \ -}; - -#ifdef CONFIG_X86_INTEL_MID - -static inline enum intel_mid_cpu_type intel_mid_identify_cpu(void) -{ - return __intel_mid_cpu_chip; -} - -static inline bool intel_mid_has_msic(void) -{ - return (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_PENWELL); -} - -#else /* !CONFIG_X86_INTEL_MID */ - -#define intel_mid_identify_cpu() 0 -#define intel_mid_has_msic() 0 - -#endif /* !CONFIG_X86_INTEL_MID */ - -enum intel_mid_timer_options { - INTEL_MID_TIMER_DEFAULT, - INTEL_MID_TIMER_APBT_ONLY, - INTEL_MID_TIMER_LAPIC_APBT, -}; - -extern enum intel_mid_timer_options intel_mid_timer_options; - -/* - * Penwell uses spread spectrum clock, so the freq number is not exactly - * the same as reported by MSR based on SDM. - */ -#define FSB_FREQ_83SKU 83200 -#define FSB_FREQ_100SKU 99840 -#define FSB_FREQ_133SKU 133000 - -#define FSB_FREQ_167SKU 167000 -#define FSB_FREQ_200SKU 200000 -#define FSB_FREQ_267SKU 267000 -#define FSB_FREQ_333SKU 333000 -#define FSB_FREQ_400SKU 400000 - -/* Bus Select SoC Fuse value */ -#define BSEL_SOC_FUSE_MASK 0x7 -/* FSB 133MHz */ -#define BSEL_SOC_FUSE_001 0x1 -/* FSB 100MHz */ -#define BSEL_SOC_FUSE_101 0x5 -/* FSB 83MHz */ -#define BSEL_SOC_FUSE_111 0x7 - -#define SFI_MTMR_MAX_NUM 8 -#define SFI_MRTC_MAX 8 - -extern void intel_scu_devices_create(void); -extern void intel_scu_devices_destroy(void); - -/* VRTC timer */ -#define MRST_VRTC_MAP_SZ 1024 -/* #define MRST_VRTC_PGOFFSET 0xc00 */ - -extern void intel_mid_rtc_init(void); - -/* The offset for the mapping of global gpio pin to irq */ -#define INTEL_MID_IRQ_OFFSET 0x100 - #endif /* _ASM_X86_INTEL_MID_H */ |