diff options
Diffstat (limited to 'arch/x86/include/asm/tlbflush.h')
| -rw-r--r-- | arch/x86/include/asm/tlbflush.h | 692 |
1 files changed, 291 insertions, 401 deletions
diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h index f4204bf377fc..00daedfefc1b 100644 --- a/arch/x86/include/asm/tlbflush.h +++ b/arch/x86/include/asm/tlbflush.h @@ -2,9 +2,11 @@ #ifndef _ASM_X86_TLBFLUSH_H #define _ASM_X86_TLBFLUSH_H -#include <linux/mm.h> +#include <linux/mm_types.h> +#include <linux/mmu_notifier.h> #include <linux/sched.h> +#include <asm/barrier.h> #include <asm/processor.h> #include <asm/cpufeature.h> #include <asm/special_insns.h> @@ -12,141 +14,56 @@ #include <asm/invpcid.h> #include <asm/pti.h> #include <asm/processor-flags.h> +#include <asm/pgtable.h> -/* - * The x86 feature is called PCID (Process Context IDentifier). It is similar - * to what is traditionally called ASID on the RISC processors. - * - * We don't use the traditional ASID implementation, where each process/mm gets - * its own ASID and flush/restart when we run out of ASID space. - * - * Instead we have a small per-cpu array of ASIDs and cache the last few mm's - * that came by on this CPU, allowing cheaper switch_mm between processes on - * this CPU. - * - * We end up with different spaces for different things. To avoid confusion we - * use different names for each of them: - * - * ASID - [0, TLB_NR_DYN_ASIDS-1] - * the canonical identifier for an mm - * - * kPCID - [1, TLB_NR_DYN_ASIDS] - * the value we write into the PCID part of CR3; corresponds to the - * ASID+1, because PCID 0 is special. - * - * uPCID - [2048 + 1, 2048 + TLB_NR_DYN_ASIDS] - * for KPTI each mm has two address spaces and thus needs two - * PCID values, but we can still do with a single ASID denomination - * for each mm. Corresponds to kPCID + 2048. - * - */ +DECLARE_PER_CPU(u64, tlbstate_untag_mask); -/* There are 12 bits of space for ASIDS in CR3 */ -#define CR3_HW_ASID_BITS 12 +void __flush_tlb_all(void); -/* - * When enabled, PAGE_TABLE_ISOLATION consumes a single bit for - * user/kernel switches - */ -#ifdef CONFIG_PAGE_TABLE_ISOLATION -# define PTI_CONSUMED_PCID_BITS 1 -#else -# define PTI_CONSUMED_PCID_BITS 0 -#endif +#define TLB_FLUSH_ALL -1UL +#define TLB_GENERATION_INVALID 0 -#define CR3_AVAIL_PCID_BITS (X86_CR3_PCID_BITS - PTI_CONSUMED_PCID_BITS) +void cr4_update_irqsoff(unsigned long set, unsigned long clear); +unsigned long cr4_read_shadow(void); -/* - * ASIDs are zero-based: 0->MAX_AVAIL_ASID are valid. -1 below to account - * for them being zero-based. Another -1 is because PCID 0 is reserved for - * use by non-PCID-aware users. - */ -#define MAX_ASID_AVAILABLE ((1 << CR3_AVAIL_PCID_BITS) - 2) - -/* - * 6 because 6 should be plenty and struct tlb_state will fit in two cache - * lines. - */ -#define TLB_NR_DYN_ASIDS 6 - -/* - * Given @asid, compute kPCID - */ -static inline u16 kern_pcid(u16 asid) +/* Set in this cpu's CR4. */ +static inline void cr4_set_bits_irqsoff(unsigned long mask) { - VM_WARN_ON_ONCE(asid > MAX_ASID_AVAILABLE); - -#ifdef CONFIG_PAGE_TABLE_ISOLATION - /* - * Make sure that the dynamic ASID space does not confict with the - * bit we are using to switch between user and kernel ASIDs. - */ - BUILD_BUG_ON(TLB_NR_DYN_ASIDS >= (1 << X86_CR3_PTI_PCID_USER_BIT)); - - /* - * The ASID being passed in here should have respected the - * MAX_ASID_AVAILABLE and thus never have the switch bit set. - */ - VM_WARN_ON_ONCE(asid & (1 << X86_CR3_PTI_PCID_USER_BIT)); -#endif - /* - * The dynamically-assigned ASIDs that get passed in are small - * (<TLB_NR_DYN_ASIDS). They never have the high switch bit set, - * so do not bother to clear it. - * - * If PCID is on, ASID-aware code paths put the ASID+1 into the - * PCID bits. This serves two purposes. It prevents a nasty - * situation in which PCID-unaware code saves CR3, loads some other - * value (with PCID == 0), and then restores CR3, thus corrupting - * the TLB for ASID 0 if the saved ASID was nonzero. It also means - * that any bugs involving loading a PCID-enabled CR3 with - * CR4.PCIDE off will trigger deterministically. - */ - return asid + 1; + cr4_update_irqsoff(mask, 0); } -/* - * Given @asid, compute uPCID - */ -static inline u16 user_pcid(u16 asid) +/* Clear in this cpu's CR4. */ +static inline void cr4_clear_bits_irqsoff(unsigned long mask) { - u16 ret = kern_pcid(asid); -#ifdef CONFIG_PAGE_TABLE_ISOLATION - ret |= 1 << X86_CR3_PTI_PCID_USER_BIT; -#endif - return ret; + cr4_update_irqsoff(0, mask); } -struct pgd_t; -static inline unsigned long build_cr3(pgd_t *pgd, u16 asid) +/* Set in this cpu's CR4. */ +static inline void cr4_set_bits(unsigned long mask) { - if (static_cpu_has(X86_FEATURE_PCID)) { - return __sme_pa(pgd) | kern_pcid(asid); - } else { - VM_WARN_ON_ONCE(asid != 0); - return __sme_pa(pgd); - } + unsigned long flags; + + local_irq_save(flags); + cr4_set_bits_irqsoff(mask); + local_irq_restore(flags); } -static inline unsigned long build_cr3_noflush(pgd_t *pgd, u16 asid) +/* Clear in this cpu's CR4. */ +static inline void cr4_clear_bits(unsigned long mask) { - VM_WARN_ON_ONCE(asid > MAX_ASID_AVAILABLE); - /* - * Use boot_cpu_has() instead of this_cpu_has() as this function - * might be called during early boot. This should work even after - * boot because all CPU's the have same capabilities: - */ - VM_WARN_ON_ONCE(!boot_cpu_has(X86_FEATURE_PCID)); - return __sme_pa(pgd) | kern_pcid(asid) | CR3_NOFLUSH; + unsigned long flags; + + local_irq_save(flags); + cr4_clear_bits_irqsoff(mask); + local_irq_restore(flags); } -#ifdef CONFIG_PARAVIRT -#include <asm/paravirt.h> -#else -#define __flush_tlb() __native_flush_tlb() -#define __flush_tlb_global() __native_flush_tlb_global() -#define __flush_tlb_one_user(addr) __native_flush_tlb_one_user(addr) -#endif +#ifndef MODULE +/* + * 6 because 6 should be plenty and struct tlb_state will fit in two cache + * lines. + */ +#define TLB_NR_DYN_ASIDS 6 struct tlb_context { u64 ctx_id; @@ -167,35 +84,18 @@ struct tlb_state { */ struct mm_struct *loaded_mm; -#define LOADED_MM_SWITCHING ((struct mm_struct *)1) +#define LOADED_MM_SWITCHING ((struct mm_struct *)1UL) /* Last user mm for optimizing IBPB */ union { struct mm_struct *last_user_mm; - unsigned long last_user_mm_ibpb; + unsigned long last_user_mm_spec; }; u16 loaded_mm_asid; u16 next_asid; /* - * We can be in one of several states: - * - * - Actively using an mm. Our CPU's bit will be set in - * mm_cpumask(loaded_mm) and is_lazy == false; - * - * - Not using a real mm. loaded_mm == &init_mm. Our CPU's bit - * will not be set in mm_cpumask(&init_mm) and is_lazy == false. - * - * - Lazily using a real mm. loaded_mm != &init_mm, our bit - * is set in mm_cpumask(loaded_mm), but is_lazy == true. - * We're heuristically guessing that the CR3 load we - * skipped more than makes up for the overhead added by - * lazy mode. - */ - bool is_lazy; - - /* * If set we changed the page tables in such a way that we * needed an invalidation of all contexts (aka. PCIDs / ASIDs). * This tells us to go invalidate all the non-loaded ctxs[] @@ -206,6 +106,16 @@ struct tlb_state { */ bool invalidate_other; +#ifdef CONFIG_ADDRESS_MASKING + /* + * Active LAM mode. + * + * X86_CR3_LAM_U57/U48 shifted right by X86_CR3_LAM_U57_BIT or 0 if LAM + * disabled. + */ + u8 lam; +#endif + /* * Mask that contains TLB_NR_DYN_ASIDS+1 bits to indicate * the corresponding user PCID needs a flush next time we @@ -240,39 +150,30 @@ struct tlb_state { */ struct tlb_context ctxs[TLB_NR_DYN_ASIDS]; }; -DECLARE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate); - -/* - * Blindly accessing user memory from NMI context can be dangerous - * if we're in the middle of switching the current user task or - * switching the loaded mm. It can also be dangerous if we - * interrupted some kernel code that was temporarily using a - * different mm. - */ -static inline bool nmi_uaccess_okay(void) -{ - struct mm_struct *loaded_mm = this_cpu_read(cpu_tlbstate.loaded_mm); - struct mm_struct *current_mm = current->mm; - - VM_WARN_ON_ONCE(!loaded_mm); +DECLARE_PER_CPU_ALIGNED(struct tlb_state, cpu_tlbstate); +struct tlb_state_shared { /* - * The condition we want to check is - * current_mm->pgd == __va(read_cr3_pa()). This may be slow, though, - * if we're running in a VM with shadow paging, and nmi_uaccess_okay() - * is supposed to be reasonably fast. + * We can be in one of several states: + * + * - Actively using an mm. Our CPU's bit will be set in + * mm_cpumask(loaded_mm) and is_lazy == false; * - * Instead, we check the almost equivalent but somewhat conservative - * condition below, and we rely on the fact that switch_mm_irqs_off() - * sets loaded_mm to LOADED_MM_SWITCHING before writing to CR3. + * - Not using a real mm. loaded_mm == &init_mm. Our CPU's bit + * will not be set in mm_cpumask(&init_mm) and is_lazy == false. + * + * - Lazily using a real mm. loaded_mm != &init_mm, our bit + * is set in mm_cpumask(loaded_mm), but is_lazy == true. + * We're heuristically guessing that the CR3 load we + * skipped more than makes up for the overhead added by + * lazy mode. */ - if (loaded_mm != current_mm) - return false; + bool is_lazy; +}; +DECLARE_PER_CPU_SHARED_ALIGNED(struct tlb_state_shared, cpu_tlbstate_shared); - VM_WARN_ON_ONCE(current_mm->pgd != __va(read_cr3_pa())); - - return true; -} +bool nmi_uaccess_okay(void); +#define nmi_uaccess_okay nmi_uaccess_okay /* Initialize cr4 shadow for this CPU. */ static inline void cr4_init_shadow(void) @@ -280,234 +181,15 @@ static inline void cr4_init_shadow(void) this_cpu_write(cpu_tlbstate.cr4, __read_cr4()); } -static inline void __cr4_set(unsigned long cr4) -{ - lockdep_assert_irqs_disabled(); - this_cpu_write(cpu_tlbstate.cr4, cr4); - __write_cr4(cr4); -} - -/* Set in this cpu's CR4. */ -static inline void cr4_set_bits(unsigned long mask) -{ - unsigned long cr4, flags; - - local_irq_save(flags); - cr4 = this_cpu_read(cpu_tlbstate.cr4); - if ((cr4 | mask) != cr4) - __cr4_set(cr4 | mask); - local_irq_restore(flags); -} - -/* Clear in this cpu's CR4. */ -static inline void cr4_clear_bits(unsigned long mask) -{ - unsigned long cr4, flags; - - local_irq_save(flags); - cr4 = this_cpu_read(cpu_tlbstate.cr4); - if ((cr4 & ~mask) != cr4) - __cr4_set(cr4 & ~mask); - local_irq_restore(flags); -} - -static inline void cr4_toggle_bits_irqsoff(unsigned long mask) -{ - unsigned long cr4; - - cr4 = this_cpu_read(cpu_tlbstate.cr4); - __cr4_set(cr4 ^ mask); -} - -/* Read the CR4 shadow. */ -static inline unsigned long cr4_read_shadow(void) -{ - return this_cpu_read(cpu_tlbstate.cr4); -} - -/* - * Mark all other ASIDs as invalid, preserves the current. - */ -static inline void invalidate_other_asid(void) -{ - this_cpu_write(cpu_tlbstate.invalidate_other, true); -} - -/* - * Save some of cr4 feature set we're using (e.g. Pentium 4MB - * enable and PPro Global page enable), so that any CPU's that boot - * up after us can get the correct flags. This should only be used - * during boot on the boot cpu. - */ extern unsigned long mmu_cr4_features; extern u32 *trampoline_cr4_features; -static inline void cr4_set_bits_and_update_boot(unsigned long mask) -{ - mmu_cr4_features |= mask; - if (trampoline_cr4_features) - *trampoline_cr4_features = mmu_cr4_features; - cr4_set_bits(mask); -} +/* How many pages can be invalidated with one INVLPGB. */ +extern u16 invlpgb_count_max; extern void initialize_tlbstate_and_flush(void); /* - * Given an ASID, flush the corresponding user ASID. We can delay this - * until the next time we switch to it. - * - * See SWITCH_TO_USER_CR3. - */ -static inline void invalidate_user_asid(u16 asid) -{ - /* There is no user ASID if address space separation is off */ - if (!IS_ENABLED(CONFIG_PAGE_TABLE_ISOLATION)) - return; - - /* - * We only have a single ASID if PCID is off and the CR3 - * write will have flushed it. - */ - if (!cpu_feature_enabled(X86_FEATURE_PCID)) - return; - - if (!static_cpu_has(X86_FEATURE_PTI)) - return; - - __set_bit(kern_pcid(asid), - (unsigned long *)this_cpu_ptr(&cpu_tlbstate.user_pcid_flush_mask)); -} - -/* - * flush the entire current user mapping - */ -static inline void __native_flush_tlb(void) -{ - /* - * Preemption or interrupts must be disabled to protect the access - * to the per CPU variable and to prevent being preempted between - * read_cr3() and write_cr3(). - */ - WARN_ON_ONCE(preemptible()); - - invalidate_user_asid(this_cpu_read(cpu_tlbstate.loaded_mm_asid)); - - /* If current->mm == NULL then the read_cr3() "borrows" an mm */ - native_write_cr3(__native_read_cr3()); -} - -/* - * flush everything - */ -static inline void __native_flush_tlb_global(void) -{ - unsigned long cr4, flags; - - if (static_cpu_has(X86_FEATURE_INVPCID)) { - /* - * Using INVPCID is considerably faster than a pair of writes - * to CR4 sandwiched inside an IRQ flag save/restore. - * - * Note, this works with CR4.PCIDE=0 or 1. - */ - invpcid_flush_all(); - return; - } - - /* - * Read-modify-write to CR4 - protect it from preemption and - * from interrupts. (Use the raw variant because this code can - * be called from deep inside debugging code.) - */ - raw_local_irq_save(flags); - - cr4 = this_cpu_read(cpu_tlbstate.cr4); - /* toggle PGE */ - native_write_cr4(cr4 ^ X86_CR4_PGE); - /* write old PGE again and flush TLBs */ - native_write_cr4(cr4); - - raw_local_irq_restore(flags); -} - -/* - * flush one page in the user mapping - */ -static inline void __native_flush_tlb_one_user(unsigned long addr) -{ - u32 loaded_mm_asid = this_cpu_read(cpu_tlbstate.loaded_mm_asid); - - asm volatile("invlpg (%0)" ::"r" (addr) : "memory"); - - if (!static_cpu_has(X86_FEATURE_PTI)) - return; - - /* - * Some platforms #GP if we call invpcid(type=1/2) before CR4.PCIDE=1. - * Just use invalidate_user_asid() in case we are called early. - */ - if (!this_cpu_has(X86_FEATURE_INVPCID_SINGLE)) - invalidate_user_asid(loaded_mm_asid); - else - invpcid_flush_one(user_pcid(loaded_mm_asid), addr); -} - -/* - * flush everything - */ -static inline void __flush_tlb_all(void) -{ - /* - * This is to catch users with enabled preemption and the PGE feature - * and don't trigger the warning in __native_flush_tlb(). - */ - VM_WARN_ON_ONCE(preemptible()); - - if (boot_cpu_has(X86_FEATURE_PGE)) { - __flush_tlb_global(); - } else { - /* - * !PGE -> !PCID (setup_pcid()), thus every flush is total. - */ - __flush_tlb(); - } -} - -/* - * flush one page in the kernel mapping - */ -static inline void __flush_tlb_one_kernel(unsigned long addr) -{ - count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ONE); - - /* - * If PTI is off, then __flush_tlb_one_user() is just INVLPG or its - * paravirt equivalent. Even with PCID, this is sufficient: we only - * use PCID if we also use global PTEs for the kernel mapping, and - * INVLPG flushes global translations across all address spaces. - * - * If PTI is on, then the kernel is mapped with non-global PTEs, and - * __flush_tlb_one_user() will flush the given address for the current - * kernel address space and for its usermode counterpart, but it does - * not flush it for other address spaces. - */ - __flush_tlb_one_user(addr); - - if (!static_cpu_has(X86_FEATURE_PTI)) - return; - - /* - * See above. We need to propagate the flush to all other address - * spaces. In principle, we only need to propagate it to kernelmode - * address spaces, but the extra bookkeeping we would need is not - * worth it. - */ - invalidate_other_asid(); -} - -#define TLB_FLUSH_ALL -1UL - -/* * TLB flushing: * * - flush_tlb_all() flushes all processes TLBs @@ -515,7 +197,7 @@ static inline void __flush_tlb_one_kernel(unsigned long addr) * - flush_tlb_page(vma, vmaddr) flushes one page * - flush_tlb_range(vma, start, end) flushes a range of pages * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages - * - flush_tlb_others(cpumask, info) flushes TLBs on other cpus + * - flush_tlb_multi(cpumask, info) flushes TLBs on multiple cpus * * ..but the i386 has somewhat limited tlb flushing capabilities, * and page-granular flushes are available only on i486 and up. @@ -541,11 +223,86 @@ struct flush_tlb_info { unsigned long start; unsigned long end; u64 new_tlb_gen; - unsigned int stride_shift; - bool freed_tables; + unsigned int initiating_cpu; + u8 stride_shift; + u8 freed_tables; + u8 trim_cpumask; }; -#define local_flush_tlb() __flush_tlb() +void flush_tlb_local(void); +void flush_tlb_one_user(unsigned long addr); +void flush_tlb_one_kernel(unsigned long addr); +void flush_tlb_multi(const struct cpumask *cpumask, + const struct flush_tlb_info *info); + +static inline bool is_dyn_asid(u16 asid) +{ + return asid < TLB_NR_DYN_ASIDS; +} + +static inline bool is_global_asid(u16 asid) +{ + return !is_dyn_asid(asid); +} + +#ifdef CONFIG_BROADCAST_TLB_FLUSH +static inline u16 mm_global_asid(struct mm_struct *mm) +{ + u16 asid; + + if (!cpu_feature_enabled(X86_FEATURE_INVLPGB)) + return 0; + + asid = smp_load_acquire(&mm->context.global_asid); + + /* mm->context.global_asid is either 0, or a global ASID */ + VM_WARN_ON_ONCE(asid && is_dyn_asid(asid)); + + return asid; +} + +static inline void mm_init_global_asid(struct mm_struct *mm) +{ + if (cpu_feature_enabled(X86_FEATURE_INVLPGB)) { + mm->context.global_asid = 0; + mm->context.asid_transition = false; + } +} + +static inline void mm_assign_global_asid(struct mm_struct *mm, u16 asid) +{ + /* + * Notably flush_tlb_mm_range() -> broadcast_tlb_flush() -> + * finish_asid_transition() needs to observe asid_transition = true + * once it observes global_asid. + */ + mm->context.asid_transition = true; + smp_store_release(&mm->context.global_asid, asid); +} + +static inline void mm_clear_asid_transition(struct mm_struct *mm) +{ + WRITE_ONCE(mm->context.asid_transition, false); +} + +static inline bool mm_in_asid_transition(struct mm_struct *mm) +{ + if (!cpu_feature_enabled(X86_FEATURE_INVLPGB)) + return false; + + return mm && READ_ONCE(mm->context.asid_transition); +} +#else +static inline u16 mm_global_asid(struct mm_struct *mm) { return 0; } +static inline void mm_init_global_asid(struct mm_struct *mm) { } +static inline void mm_assign_global_asid(struct mm_struct *mm, u16 asid) { } +static inline void mm_clear_asid_transition(struct mm_struct *mm) { } +static inline bool mm_in_asid_transition(struct mm_struct *mm) { return false; } +#endif /* CONFIG_BROADCAST_TLB_FLUSH */ + +#ifdef CONFIG_PARAVIRT +#include <asm/paravirt.h> +#endif #define flush_tlb_mm(mm) \ flush_tlb_mm_range(mm, 0UL, TLB_FLUSH_ALL, 0UL, true) @@ -554,7 +311,7 @@ struct flush_tlb_info { flush_tlb_mm_range((vma)->vm_mm, start, end, \ ((vma)->vm_flags & VM_HUGETLB) \ ? huge_page_shift(hstate_vma(vma)) \ - : PAGE_SHIFT, false) + : PAGE_SHIFT, true) extern void flush_tlb_all(void); extern void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start, @@ -567,8 +324,17 @@ static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long a) flush_tlb_mm_range(vma->vm_mm, a, a + PAGE_SIZE, PAGE_SHIFT, false); } -void native_flush_tlb_others(const struct cpumask *cpumask, - const struct flush_tlb_info *info); +static inline bool arch_tlbbatch_should_defer(struct mm_struct *mm) +{ + bool should_defer = false; + + /* If remote CPUs need to be flushed then defer batch the flush */ + if (cpumask_any_but(mm_cpumask(mm), get_cpu()) < nr_cpu_ids) + should_defer = true; + put_cpu(); + + return should_defer; +} static inline u64 inc_mm_tlb_gen(struct mm_struct *mm) { @@ -581,21 +347,145 @@ static inline u64 inc_mm_tlb_gen(struct mm_struct *mm) return atomic64_inc_return(&mm->context.tlb_gen); } -static inline void arch_tlbbatch_add_mm(struct arch_tlbflush_unmap_batch *batch, - struct mm_struct *mm) +static inline void arch_tlbbatch_add_pending(struct arch_tlbflush_unmap_batch *batch, + struct mm_struct *mm, unsigned long start, unsigned long end) { inc_mm_tlb_gen(mm); cpumask_or(&batch->cpumask, &batch->cpumask, mm_cpumask(mm)); + batch->unmapped_pages = true; + mmu_notifier_arch_invalidate_secondary_tlbs(mm, 0, -1UL); } extern void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch); -#ifndef CONFIG_PARAVIRT -#define flush_tlb_others(mask, info) \ - native_flush_tlb_others(mask, info) +static inline bool pte_flags_need_flush(unsigned long oldflags, + unsigned long newflags, + bool ignore_access) +{ + /* + * Flags that require a flush when cleared but not when they are set. + * Only include flags that would not trigger spurious page-faults. + * Non-present entries are not cached. Hardware would set the + * dirty/access bit if needed without a fault. + */ + const pteval_t flush_on_clear = _PAGE_DIRTY | _PAGE_PRESENT | + _PAGE_ACCESSED; + const pteval_t software_flags = _PAGE_SOFTW1 | _PAGE_SOFTW2 | + _PAGE_SOFTW3 | _PAGE_SOFTW4 | + _PAGE_SAVED_DIRTY; + const pteval_t flush_on_change = _PAGE_RW | _PAGE_USER | _PAGE_PWT | + _PAGE_PCD | _PAGE_PSE | _PAGE_GLOBAL | _PAGE_PAT | + _PAGE_PAT_LARGE | _PAGE_PKEY_BIT0 | _PAGE_PKEY_BIT1 | + _PAGE_PKEY_BIT2 | _PAGE_PKEY_BIT3 | _PAGE_NX; + unsigned long diff = oldflags ^ newflags; + + BUILD_BUG_ON(flush_on_clear & software_flags); + BUILD_BUG_ON(flush_on_clear & flush_on_change); + BUILD_BUG_ON(flush_on_change & software_flags); + + /* Ignore software flags */ + diff &= ~software_flags; + + if (ignore_access) + diff &= ~_PAGE_ACCESSED; + + /* + * Did any of the 'flush_on_clear' flags was clleared set from between + * 'oldflags' and 'newflags'? + */ + if (diff & oldflags & flush_on_clear) + return true; + + /* Flush on modified flags. */ + if (diff & flush_on_change) + return true; + + /* Ensure there are no flags that were left behind */ + if (IS_ENABLED(CONFIG_DEBUG_VM) && + (diff & ~(flush_on_clear | software_flags | flush_on_change))) { + VM_WARN_ON_ONCE(1); + return true; + } -#define paravirt_tlb_remove_table(tlb, page) \ - tlb_remove_page(tlb, (void *)(page)) + return false; +} + +/* + * pte_needs_flush() checks whether permissions were demoted and require a + * flush. It should only be used for userspace PTEs. + */ +static inline bool pte_needs_flush(pte_t oldpte, pte_t newpte) +{ + /* !PRESENT -> * ; no need for flush */ + if (!(pte_flags(oldpte) & _PAGE_PRESENT)) + return false; + + /* PFN changed ; needs flush */ + if (pte_pfn(oldpte) != pte_pfn(newpte)) + return true; + + /* + * check PTE flags; ignore access-bit; see comment in + * ptep_clear_flush_young(). + */ + return pte_flags_need_flush(pte_flags(oldpte), pte_flags(newpte), + true); +} +#define pte_needs_flush pte_needs_flush + +/* + * huge_pmd_needs_flush() checks whether permissions were demoted and require a + * flush. It should only be used for userspace huge PMDs. + */ +static inline bool huge_pmd_needs_flush(pmd_t oldpmd, pmd_t newpmd) +{ + /* !PRESENT -> * ; no need for flush */ + if (!(pmd_flags(oldpmd) & _PAGE_PRESENT)) + return false; + + /* PFN changed ; needs flush */ + if (pmd_pfn(oldpmd) != pmd_pfn(newpmd)) + return true; + + /* + * check PMD flags; do not ignore access-bit; see + * pmdp_clear_flush_young(). + */ + return pte_flags_need_flush(pmd_flags(oldpmd), pmd_flags(newpmd), + false); +} +#define huge_pmd_needs_flush huge_pmd_needs_flush + +#ifdef CONFIG_ADDRESS_MASKING +static inline u64 tlbstate_lam_cr3_mask(void) +{ + u64 lam = this_cpu_read(cpu_tlbstate.lam); + + return lam << X86_CR3_LAM_U57_BIT; +} + +static inline void cpu_tlbstate_update_lam(unsigned long lam, u64 untag_mask) +{ + this_cpu_write(cpu_tlbstate.lam, lam >> X86_CR3_LAM_U57_BIT); + this_cpu_write(tlbstate_untag_mask, untag_mask); +} + +#else + +static inline u64 tlbstate_lam_cr3_mask(void) +{ + return 0; +} + +static inline void cpu_tlbstate_update_lam(unsigned long lam, u64 untag_mask) +{ +} #endif +#endif /* !MODULE */ +static inline void __native_tlb_flush_global(unsigned long cr4) +{ + native_write_cr4(cr4 ^ X86_CR4_PGE); + native_write_cr4(cr4); +} #endif /* _ASM_X86_TLBFLUSH_H */ |