1 files changed, 22 insertions, 17 deletions

diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index a0693b71cfc1..6ab9eac64670 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -16,16 +16,19 @@
 #include <linux/acpi.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/pgtable.h>
 
 #include <linux/atomic.h>
 #include <asm/timer.h>
 #include <asm/hw_irq.h>
-#include <asm/pgtable.h>
 #include <asm/desc.h>
+#include <asm/io_apic.h>
+#include <asm/acpi.h>
 #include <asm/apic.h>
 #include <asm/setup.h>
 #include <asm/i8259.h>
 #include <asm/traps.h>
+#include <asm/fred.h>
 #include <asm/prom.h>
 
 /*
@@ -44,15 +47,6 @@
  * (these are usually mapped into the 0x30-0xff vector range)
  */
 
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-static struct irqaction irq2 = {
-	.handler = no_action,
-	.name = "cascade",
-	.flags = IRQF_NO_THREAD,
-};
-
 DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
 	[0 ... NR_VECTORS - 1] = VECTOR_UNUSED,
 };
@@ -72,8 +66,10 @@ void __init init_ISA_irqs(void)
 
 	legacy_pic->init(0);
 
-	for (i = 0; i < nr_legacy_irqs(); i++)
+	for (i = 0; i < nr_legacy_irqs(); i++) {
 		irq_set_chip_and_handler(i, chip, handle_level_irq);
+		irq_set_status_flags(i, IRQ_LEVEL);
+	}
 }
 
 void __init init_IRQ(void)
@@ -84,13 +80,15 @@ void __init init_IRQ(void)
 	 * On cpu 0, Assign ISA_IRQ_VECTOR(irq) to IRQ 0..15.
 	 * If these IRQ's are handled by legacy interrupt-controllers like PIC,
 	 * then this configuration will likely be static after the boot. If
-	 * these IRQ's are handled by more mordern controllers like IO-APIC,
+	 * these IRQs are handled by more modern controllers like IO-APIC,
 	 * then this vector space can be freed and re-used dynamically as the
 	 * irq's migrate etc.
 	 */
 	for (i = 0; i < nr_legacy_irqs(); i++)
 		per_cpu(vector_irq, 0)[ISA_IRQ_VECTOR(i)] = irq_to_desc(i);
 
+	BUG_ON(irq_init_percpu_irqstack(smp_processor_id()));
+
 	x86_init.irqs.intr_init();
 }
 
@@ -99,11 +97,18 @@ void __init native_init_IRQ(void)
 	/* Execute any quirks before the call gates are initialised: */
 	x86_init.irqs.pre_vector_init();
 
-	idt_setup_apic_and_irq_gates();
-	lapic_assign_system_vectors();
+	/* FRED's IRQ path may be used even if FRED isn't fully enabled. */
+	if (IS_ENABLED(CONFIG_X86_FRED))
+		fred_complete_exception_setup();
 
-	if (!acpi_ioapic && !of_ioapic && nr_legacy_irqs())
-		setup_irq(2, &irq2);
+	if (!cpu_feature_enabled(X86_FEATURE_FRED))
+		idt_setup_apic_and_irq_gates();
+
+	lapic_assign_system_vectors();
 
-	irq_ctx_init(smp_processor_id());
+	if (!acpi_ioapic && !of_ioapic && nr_legacy_irqs()) {
+		/* IRQ2 is cascade interrupt to second interrupt controller */
+		if (request_irq(2, no_action, IRQF_NO_THREAD, "cascade", NULL))
+			pr_err("%s: request_irq() failed\n", "cascade");
+	}
 }