diff options
Diffstat (limited to 'arch/x86/pci/fixup.c')
| -rw-r--r-- | arch/x86/pci/fixup.c | 183 |
1 files changed, 180 insertions, 3 deletions
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c index e3ec02e6ac9f..25076a5acd96 100644 --- a/arch/x86/pci/fixup.c +++ b/arch/x86/pci/fixup.c @@ -3,11 +3,13 @@ * Exceptions for specific devices. Usually work-arounds for fatal design flaws. */ +#include <linux/bitfield.h> #include <linux/delay.h> #include <linux/dmi.h> #include <linux/pci.h> +#include <linux/suspend.h> #include <linux/vgaarb.h> -#include <asm/amd_nb.h> +#include <asm/amd/node.h> #include <asm/hpet.h> #include <asm/pci_x86.h> @@ -293,6 +295,46 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC, pcie_ro DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC1, pcie_rootport_aspm_quirk); /* + * PCIe devices underneath Xeon 6 PCIe Root Port bifurcated to x2 have lower + * performance with Extended Tags and MRRS > 128B. Work around the performance + * problems by disabling Extended Tags and limiting MRRS to 128B. + * + * https://cdrdv2.intel.com/v1/dl/getContent/837176 + */ +static int limit_mrrs_to_128(struct pci_host_bridge *b, struct pci_dev *pdev) +{ + int readrq = pcie_get_readrq(pdev); + + if (readrq > 128) + pcie_set_readrq(pdev, 128); + + return 0; +} + +static void pci_xeon_x2_bifurc_quirk(struct pci_dev *pdev) +{ + struct pci_host_bridge *bridge = pci_find_host_bridge(pdev->bus); + u32 linkcap; + + pcie_capability_read_dword(pdev, PCI_EXP_LNKCAP, &linkcap); + if (FIELD_GET(PCI_EXP_LNKCAP_MLW, linkcap) != 0x2) + return; + + bridge->no_ext_tags = 1; + bridge->enable_device = limit_mrrs_to_128; + pci_info(pdev, "Disabling Extended Tags and limiting MRRS to 128B (performance reasons due to x2 PCIe link)\n"); +} + +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x0db0, pci_xeon_x2_bifurc_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x0db1, pci_xeon_x2_bifurc_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x0db2, pci_xeon_x2_bifurc_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x0db3, pci_xeon_x2_bifurc_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x0db6, pci_xeon_x2_bifurc_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x0db7, pci_xeon_x2_bifurc_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x0db8, pci_xeon_x2_bifurc_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x0db9, pci_xeon_x2_bifurc_quirk); + +/* * Fixup to mark boot BIOS video selected by BIOS before it changes * * From information provided by "Jon Smirl" <jonsmirl@gmail.com> @@ -755,7 +797,7 @@ static void pci_amd_enable_64bit_bar(struct pci_dev *dev) dev_info(&dev->dev, "adding root bus resource %pR (tainting kernel)\n", res); add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK); - pci_bus_add_resource(dev->bus, res, 0); + pci_bus_add_resource(dev->bus, res); } base = ((res->start >> 8) & AMD_141b_MMIO_BASE_MMIOBASE_MASK) | @@ -826,7 +868,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7910, rs690_fix_64bit_dma); #endif -#ifdef CONFIG_AMD_NB +#ifdef CONFIG_AMD_NODE #define AMD_15B8_RCC_DEV2_EPF0_STRAP2 0x10136008 #define AMD_15B8_RCC_DEV2_EPF0_STRAP2_NO_SOFT_RESET_DEV2_F0_MASK 0x00000080L @@ -904,3 +946,138 @@ static void chromeos_fixup_apl_pci_l1ss_capability(struct pci_dev *dev) } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x5ad6, chromeos_save_apl_pci_l1ss_capability); DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x5ad6, chromeos_fixup_apl_pci_l1ss_capability); + +/* + * Disable D3cold on Asus B1400 PCI-NVMe bridge + * + * On this platform with VMD off, the NVMe device cannot successfully power + * back on from D3cold. This appears to be an untested transition by the + * vendor: Windows leaves the NVMe and parent bridge in D0 during suspend. + * + * We disable D3cold on the parent bridge for simplicity, and the fact that + * both parent bridge and NVMe device share the same power resource. + * + * This is only needed on BIOS versions before 308; the newer versions flip + * StorageD3Enable from 1 to 0. + */ +static const struct dmi_system_id asus_nvme_broken_d3cold_table[] = { + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_BIOS_VERSION, "B1400CEAE.304"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_BIOS_VERSION, "B1400CEAE.305"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_BIOS_VERSION, "B1400CEAE.306"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_BIOS_VERSION, "B1400CEAE.307"), + }, + }, + {} +}; + +static void asus_disable_nvme_d3cold(struct pci_dev *pdev) +{ + if (dmi_check_system(asus_nvme_broken_d3cold_table) > 0) + pci_d3cold_disable(pdev); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x9a09, asus_disable_nvme_d3cold); + +#ifdef CONFIG_SUSPEND +/* + * Root Ports on some AMD SoCs advertise PME_Support for D3hot and D3cold, but + * if the SoC is put into a hardware sleep state by the amd-pmc driver, the + * Root Ports don't generate wakeup interrupts for USB devices. + * + * When suspending, remove D3hot and D3cold from the PME_Support advertised + * by the Root Port so we don't use those states if we're expecting wakeup + * interrupts. Restore the advertised PME_Support when resuming. + */ +static void amd_rp_pme_suspend(struct pci_dev *dev) +{ + struct pci_dev *rp; + + /* + * If system suspend is not in progress, we're doing runtime suspend, so + * amd-pmc will not be involved so PMEs during D3 work as advertised. + * + * The PMEs *do* work if amd-pmc doesn't put the SoC in the hardware + * sleep state, but we assume amd-pmc is always present. + */ + if (!pm_suspend_in_progress()) + return; + + rp = pcie_find_root_port(dev); + if (!rp || !rp->pm_cap) + return; + + rp->pme_support &= ~((PCI_PM_CAP_PME_D3hot|PCI_PM_CAP_PME_D3cold) >> + PCI_PM_CAP_PME_SHIFT); + dev_info_once(&rp->dev, "quirk: disabling D3cold for suspend\n"); +} + +static void amd_rp_pme_resume(struct pci_dev *dev) +{ + struct pci_dev *rp; + u16 pmc; + + rp = pcie_find_root_port(dev); + if (!rp || !rp->pm_cap) + return; + + pci_read_config_word(rp, rp->pm_cap + PCI_PM_PMC, &pmc); + rp->pme_support = FIELD_GET(PCI_PM_CAP_PME_MASK, pmc); +} +/* Rembrandt (yellow_carp) */ +DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_AMD, 0x162e, amd_rp_pme_suspend); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, 0x162e, amd_rp_pme_resume); +DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_AMD, 0x162f, amd_rp_pme_suspend); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, 0x162f, amd_rp_pme_resume); +/* Phoenix (pink_sardine) */ +DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_AMD, 0x1668, amd_rp_pme_suspend); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, 0x1668, amd_rp_pme_resume); +DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_AMD, 0x1669, amd_rp_pme_suspend); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, 0x1669, amd_rp_pme_resume); + +/* + * Putting PCIe root ports on Ryzen SoCs with USB4 controllers into D3hot + * may cause problems when the system attempts wake up from s2idle. + * + * On the TUXEDO Sirius 16 Gen 1 with a specific old BIOS this manifests as + * a system hang. + */ +static const struct dmi_system_id quirk_tuxeo_rp_d3_dmi_table[] = { + { + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TUXEDO"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "APX958"), + DMI_EXACT_MATCH(DMI_BIOS_VERSION, "V1.00A00_20240108"), + }, + }, + {} +}; + +static void quirk_tuxeo_rp_d3(struct pci_dev *pdev) +{ + struct pci_dev *root_pdev; + + if (dmi_check_system(quirk_tuxeo_rp_d3_dmi_table)) { + root_pdev = pcie_find_root_port(pdev); + if (root_pdev) + root_pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3; + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x1502, quirk_tuxeo_rp_d3); +#endif /* CONFIG_SUSPEND */ |