diff options
Diffstat (limited to 'arch/x86/power/cpu.c')
| -rw-r--r-- | arch/x86/power/cpu.c | 163 |
1 files changed, 89 insertions, 74 deletions
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c index 7c65102debaf..916441f5e85c 100644 --- a/arch/x86/power/cpu.c +++ b/arch/x86/power/cpu.c @@ -20,11 +20,15 @@ #include <asm/page.h> #include <asm/mce.h> #include <asm/suspend.h> -#include <asm/fpu/internal.h> +#include <asm/fpu/api.h> #include <asm/debugreg.h> #include <asm/cpu.h> +#include <asm/cacheinfo.h> #include <asm/mmu_context.h> #include <asm/cpu_device_id.h> +#include <asm/microcode.h> +#include <asm/msr.h> +#include <asm/fred.h> #ifdef CONFIG_X86_32 __visible unsigned long saved_context_ebx; @@ -40,7 +44,8 @@ static void msr_save_context(struct saved_context *ctxt) struct saved_msr *end = msr + ctxt->saved_msrs.num; while (msr < end) { - msr->valid = !rdmsrl_safe(msr->info.msr_no, &msr->info.reg.q); + if (msr->valid) + rdmsrq(msr->info.msr_no, msr->info.reg.q); msr++; } } @@ -52,25 +57,26 @@ static void msr_restore_context(struct saved_context *ctxt) while (msr < end) { if (msr->valid) - wrmsrl(msr->info.msr_no, msr->info.reg.q); + wrmsrq(msr->info.msr_no, msr->info.reg.q); msr++; } } /** - * __save_processor_state - save CPU registers before creating a - * hibernation image and before restoring the memory state from it - * @ctxt - structure to store the registers contents in + * __save_processor_state() - Save CPU registers before creating a + * hibernation image and before restoring + * the memory state from it + * @ctxt: Structure to store the registers contents in. * - * NOTE: If there is a CPU register the modification of which by the - * boot kernel (ie. the kernel used for loading the hibernation image) - * might affect the operations of the restored target kernel (ie. the one - * saved in the hibernation image), then its contents must be saved by this - * function. In other words, if kernel A is hibernated and different - * kernel B is used for loading the hibernation image into memory, the - * kernel A's __save_processor_state() function must save all registers - * needed by kernel A, so that it can operate correctly after the resume - * regardless of what kernel B does in the meantime. + * NOTE: If there is a CPU register the modification of which by the + * boot kernel (ie. the kernel used for loading the hibernation image) + * might affect the operations of the restored target kernel (ie. the one + * saved in the hibernation image), then its contents must be saved by this + * function. In other words, if kernel A is hibernated and different + * kernel B is used for loading the hibernation image into memory, the + * kernel A's __save_processor_state() function must save all registers + * needed by kernel A, so that it can operate correctly after the resume + * regardless of what kernel B does in the meantime. */ static void __save_processor_state(struct saved_context *ctxt) { @@ -99,21 +105,18 @@ static void __save_processor_state(struct saved_context *ctxt) /* * segment registers */ -#ifdef CONFIG_X86_32_LAZY_GS savesegment(gs, ctxt->gs); -#endif #ifdef CONFIG_X86_64 - savesegment(gs, ctxt->gs); savesegment(fs, ctxt->fs); savesegment(ds, ctxt->ds); savesegment(es, ctxt->es); - rdmsrl(MSR_FS_BASE, ctxt->fs_base); - rdmsrl(MSR_GS_BASE, ctxt->kernelmode_gs_base); - rdmsrl(MSR_KERNEL_GS_BASE, ctxt->usermode_gs_base); + rdmsrq(MSR_FS_BASE, ctxt->fs_base); + rdmsrq(MSR_GS_BASE, ctxt->kernelmode_gs_base); + rdmsrq(MSR_KERNEL_GS_BASE, ctxt->usermode_gs_base); mtrr_save_fixed_ranges(NULL); - rdmsrl(MSR_EFER, ctxt->efer); + rdmsrq(MSR_EFER, ctxt->efer); #endif /* @@ -123,7 +126,7 @@ static void __save_processor_state(struct saved_context *ctxt) ctxt->cr2 = read_cr2(); ctxt->cr3 = __read_cr3(); ctxt->cr4 = __read_cr4(); - ctxt->misc_enable_saved = !rdmsrl_safe(MSR_IA32_MISC_ENABLE, + ctxt->misc_enable_saved = !rdmsrq_safe(MSR_IA32_MISC_ENABLE, &ctxt->misc_enable); msr_save_context(ctxt); } @@ -184,17 +187,19 @@ static void fix_processor_context(void) } /** - * __restore_processor_state - restore the contents of CPU registers saved - * by __save_processor_state() - * @ctxt - structure to load the registers contents from + * __restore_processor_state() - Restore the contents of CPU registers saved + * by __save_processor_state() + * @ctxt: Structure to load the registers contents from. * * The asm code that gets us here will have restored a usable GDT, although * it will be pointing to the wrong alias. */ static void notrace __restore_processor_state(struct saved_context *ctxt) { + struct cpuinfo_x86 *c; + if (ctxt->misc_enable_saved) - wrmsrl(MSR_IA32_MISC_ENABLE, ctxt->misc_enable); + wrmsrq(MSR_IA32_MISC_ENABLE, ctxt->misc_enable); /* * control registers */ @@ -204,7 +209,7 @@ static void notrace __restore_processor_state(struct saved_context *ctxt) __write_cr4(ctxt->cr4); #else /* CONFIG X86_64 */ - wrmsrl(MSR_EFER, ctxt->efer); + wrmsrq(MSR_EFER, ctxt->efer); __write_cr4(ctxt->cr4); #endif write_cr3(ctxt->cr3); @@ -227,10 +232,22 @@ static void notrace __restore_processor_state(struct saved_context *ctxt) * handlers or in complicated helpers like load_gs_index(). */ #ifdef CONFIG_X86_64 - wrmsrl(MSR_GS_BASE, ctxt->kernelmode_gs_base); + wrmsrq(MSR_GS_BASE, ctxt->kernelmode_gs_base); + + /* + * Reinitialize FRED to ensure the FRED MSRs contain the same values + * as before hibernation. + * + * Note, the setup of FRED RSPs requires access to percpu data + * structures. Therefore, FRED reinitialization can only occur after + * the percpu access pointer (i.e., MSR_GS_BASE) is restored. + */ + if (ctxt->cr4 & X86_CR4_FRED) { + cpu_init_fred_exceptions(); + cpu_init_fred_rsps(); + } #else loadsegment(fs, __KERNEL_PERCPU); - loadsegment(gs, __KERNEL_STACK_CANARY); #endif /* Restore the TSS, RO GDT, LDT, and usermode-relevant MSRs. */ @@ -251,17 +268,28 @@ static void notrace __restore_processor_state(struct saved_context *ctxt) * restoring the selectors clobbers the bases. Keep in mind * that MSR_KERNEL_GS_BASE is horribly misnamed. */ - wrmsrl(MSR_FS_BASE, ctxt->fs_base); - wrmsrl(MSR_KERNEL_GS_BASE, ctxt->usermode_gs_base); -#elif defined(CONFIG_X86_32_LAZY_GS) + wrmsrq(MSR_FS_BASE, ctxt->fs_base); + wrmsrq(MSR_KERNEL_GS_BASE, ctxt->usermode_gs_base); +#else loadsegment(gs, ctxt->gs); #endif do_fpu_end(); tsc_verify_tsc_adjust(true); x86_platform.restore_sched_clock_state(); - mtrr_bp_restore(); + cache_bp_restore(); perf_restore_debug_store(); + + c = &cpu_data(smp_processor_id()); + if (cpu_has(c, X86_FEATURE_MSR_IA32_FEAT_CTL)) + init_ia32_feat_ctl(c); + + microcode_bsp_resume(); + + /* + * This needs to happen after the microcode has been updated upon resume + * because some of the MSRs are "emulated" in microcode. + */ msr_restore_context(ctxt); } @@ -275,7 +303,7 @@ EXPORT_SYMBOL(restore_processor_state); #endif #if defined(CONFIG_HIBERNATION) && defined(CONFIG_HOTPLUG_CPU) -static void resume_play_dead(void) +static void __noreturn resume_play_dead(void) { play_dead_common(); tboot_shutdown(TB_SHUTDOWN_WFS); @@ -315,7 +343,7 @@ int hibernate_resume_nonboot_cpu_disable(void) /* * When bsp_check() is called in hibernate and suspend, cpu hotplug - * is disabled already. So it's unnessary to handle race condition between + * is disabled already. So it's unnecessary to handle race condition between * cpumask query and cpu hotplug. */ static int bsp_check(void) @@ -338,43 +366,6 @@ static int bsp_pm_callback(struct notifier_block *nb, unsigned long action, case PM_HIBERNATION_PREPARE: ret = bsp_check(); break; -#ifdef CONFIG_DEBUG_HOTPLUG_CPU0 - case PM_RESTORE_PREPARE: - /* - * When system resumes from hibernation, online CPU0 because - * 1. it's required for resume and - * 2. the CPU was online before hibernation - */ - if (!cpu_online(0)) - _debug_hotplug_cpu(0, 1); - break; - case PM_POST_RESTORE: - /* - * When a resume really happens, this code won't be called. - * - * This code is called only when user space hibernation software - * prepares for snapshot device during boot time. So we just - * call _debug_hotplug_cpu() to restore to CPU0's state prior to - * preparing the snapshot device. - * - * This works for normal boot case in our CPU0 hotplug debug - * mode, i.e. CPU0 is offline and user mode hibernation - * software initializes during boot time. - * - * If CPU0 is online and user application accesses snapshot - * device after boot time, this will offline CPU0 and user may - * see different CPU0 state before and after accessing - * the snapshot device. But hopefully this is not a case when - * user debugging CPU0 hotplug. Even if users hit this case, - * they can easily online CPU0 back. - * - * To simplify this debug code, we only consider normal boot - * case. Otherwise we need to remember CPU0's state and restore - * to that state and resolve racy conditions etc. - */ - _debug_hotplug_cpu(0, 0); - break; -#endif default: break; } @@ -421,8 +412,10 @@ static int msr_build_context(const u32 *msr_id, const int num) } for (i = saved_msrs->num, j = 0; i < total_num; i++, j++) { + u64 dummy; + msr_array[i].info.msr_no = msr_id[j]; - msr_array[i].valid = false; + msr_array[i].valid = !rdmsrq_safe(msr_id[j], &dummy); msr_array[i].info.reg.q = 0; } saved_msrs->num = total_num; @@ -497,10 +490,32 @@ static int pm_cpu_check(const struct x86_cpu_id *c) return ret; } +static void pm_save_spec_msr(void) +{ + struct msr_enumeration { + u32 msr_no; + u32 feature; + } msr_enum[] = { + { MSR_IA32_SPEC_CTRL, X86_FEATURE_MSR_SPEC_CTRL }, + { MSR_IA32_TSX_CTRL, X86_FEATURE_MSR_TSX_CTRL }, + { MSR_TSX_FORCE_ABORT, X86_FEATURE_TSX_FORCE_ABORT }, + { MSR_IA32_MCU_OPT_CTRL, X86_FEATURE_SRBDS_CTRL }, + { MSR_AMD64_LS_CFG, X86_FEATURE_LS_CFG_SSBD }, + { MSR_AMD64_DE_CFG, X86_FEATURE_LFENCE_RDTSC }, + }; + int i; + + for (i = 0; i < ARRAY_SIZE(msr_enum); i++) { + if (boot_cpu_has(msr_enum[i].feature)) + msr_build_context(&msr_enum[i].msr_no, 1); + } +} + static int pm_check_save_msr(void) { dmi_check_system(msr_save_dmi_table); pm_cpu_check(msr_save_cpu_table); + pm_save_spec_msr(); return 0; } |