diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 832 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 838 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 1070 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 1076 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916-mtp.dts | 15 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi | 21 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8996-mtp.dts | 24 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi | 30 |
8 files changed, 1937 insertions, 1969 deletions
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index f3c0dbfd0a23..a5320d6d30e7 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -5,9 +5,839 @@ /dts-v1/; -#include "apq8016-sbc.dtsi" +#include "msm8916-pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> +#include <dt-bindings/sound/apq8016-lpass.h> / { model = "Qualcomm Technologies, Inc. APQ 8016 SBC"; compatible = "qcom,apq8016-sbc", "qcom,apq8016"; + + aliases { + serial0 = &blsp1_uart2; + serial1 = &blsp1_uart1; + usid0 = &pm8916_0; + i2c0 = &blsp_i2c2; + i2c1 = &blsp_i2c6; + i2c3 = &blsp_i2c4; + spi0 = &blsp_spi5; + spi1 = &blsp_spi3; + }; + + chosen { + stdout-path = "serial0"; + }; + + camera_vdddo_1v8: camera-vdddo-1v8 { + compatible = "regulator-fixed"; + regulator-name = "camera_vdddo"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + camera_vdda_2v8: camera-vdda-2v8 { + compatible = "regulator-fixed"; + regulator-name = "camera_vdda"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + camera_vddd_1v5: camera-vddd-1v5 { + compatible = "regulator-fixed"; + regulator-name = "camera_vddd"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + reserved-memory { + ramoops@bff00000 { + compatible = "ramoops"; + reg = <0x0 0xbff00000 0x0 0x100000>; + + record-size = <0x20000>; + console-size = <0x20000>; + ftrace-size = <0x20000>; + }; + }; + + usb2513 { + compatible = "smsc,usb3503"; + reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>; + initial-mode = <1>; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7533_out>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&msm_key_volp_n_default>; + + button@0 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&msmgpio_leds>, + <&pm8916_gpios_leds>, + <&pm8916_mpps_leds>; + + compatible = "gpio-leds"; + + led@1 { + label = "apq8016-sbc:green:user1"; + gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@2 { + label = "apq8016-sbc:green:user2"; + gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@3 { + label = "apq8016-sbc:green:user3"; + gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led@4 { + label = "apq8016-sbc:green:user4"; + gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + panic-indicator; + default-state = "off"; + }; + + led@5 { + label = "apq8016-sbc:yellow:wlan"; + gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + led@6 { + label = "apq8016-sbc:blue:bt"; + gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp_i2c2 { + /* On Low speed expansion */ + status = "okay"; + label = "LS-I2C0"; +}; + +&blsp_i2c4 { + /* On High speed expansion */ + status = "okay"; + label = "HS-I2C2"; + + adv_bridge: bridge@39 { + status = "okay"; + + compatible = "adi,adv7533"; + reg = <0x39>; + + interrupt-parent = <&msmgpio>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + + adi,dsi-lanes = <4>; + clocks = <&rpmcc RPM_SMD_BB_CLK2>; + clock-names = "cec"; + + pd-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + + avdd-supply = <&pm8916_l6>; + v1p2-supply = <&pm8916_l6>; + v3p3-supply = <&pm8916_l17>; + + pinctrl-names = "default","sleep"; + pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>; + pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>; + #sound-dai-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7533_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + adv7533_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&blsp_i2c6 { + /* On Low speed expansion */ + status = "okay"; + label = "LS-I2C1"; +}; + +&blsp_spi3 { + /* On High speed expansion */ + status = "okay"; + label = "HS-SPI1"; +}; + +&blsp_spi5 { + /* On Low speed expansion */ + status = "okay"; + label = "LS-SPI0"; +}; + +&blsp1_uart1 { + status = "okay"; + label = "LS-UART0"; +}; + +&blsp1_uart2 { + status = "okay"; + label = "LS-UART1"; +}; + +&camss { + status = "okay"; + ports { + port@0 { + reg = <0>; + csiphy0_ep: endpoint { + clock-lanes = <1>; + data-lanes = <0 2>; + remote-endpoint = <&ov5640_ep>; + status = "okay"; + }; + }; + }; +}; + +&cci { + status = "okay"; +}; + +&cci_i2c0 { + camera_rear@3b { + compatible = "ovti,ov5640"; + reg = <0x3b>; + + enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>; + reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&camera_rear_default>; + + clocks = <&gcc GCC_CAMSS_MCLK0_CLK>; + clock-names = "xclk"; + clock-frequency = <23880000>; + + vdddo-supply = <&camera_vdddo_1v8>; + vdda-supply = <&camera_vdda_2v8>; + vddd-supply = <&camera_vddd_1v5>; + + /* No camera mezzanine by default */ + status = "disabled"; + + port { + ov5640_ep: endpoint { + clock-lanes = <1>; + data-lanes = <0 2>; + remote-endpoint = <&csiphy0_ep>; + }; + }; + }; +}; + +&dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&adv7533_in>; +}; + +&lpass { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mpss { + status = "okay"; + + firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&pronto { + status = "okay"; + + firmware-name = "qcom/apq8016/wcnss.mbn"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&sound { + status = "okay"; + + pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; + pinctrl-names = "default", "sleep"; + qcom,model = "DB410c"; + qcom,audio-routing = + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + external-dai-link@0 { + link-name = "ADV7533"; + cpu { + sound-dai = <&lpass MI2S_QUATERNARY>; + }; + codec { + sound-dai = <&adv_bridge 0>; + }; + }; + + internal-codec-playback-dai-link@0 { + link-name = "WCD"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + internal-codec-capture-dai-link@0 { + link-name = "WCD-Capture"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; + +&usb { + status = "okay"; + extcon = <&usb_id>, <&usb_id>; + + pinctrl-names = "default", "device"; + pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>; + pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcd_codec { + clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "mclk"; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; +}; + +&wcnss_ctrl { + firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin"; +}; + +/* Enable CoreSight */ +&cti0 { status = "okay"; }; +&cti1 { status = "okay"; }; +&cti12 { status = "okay"; }; +&cti13 { status = "okay"; }; +&cti14 { status = "okay"; }; +&cti15 { status = "okay"; }; +&debug0 { status = "okay"; }; +&debug1 { status = "okay"; }; +&debug2 { status = "okay"; }; +&debug3 { status = "okay"; }; +&etf { status = "okay"; }; +&etm0 { status = "okay"; }; +&etm1 { status = "okay"; }; +&etm2 { status = "okay"; }; +&etm3 { status = "okay"; }; +&etr { status = "okay"; }; +&funnel0 { status = "okay"; }; +&funnel1 { status = "okay"; }; +&replicator { status = "okay"; }; +&stm { status = "okay"; }; +&tpiu { status = "okay"; }; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <375000>; + regulator-max-microvolt = <1562000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + }; + + l1 { + regulator-min-microvolt = <375000>; + regulator-max-microvolt = <1525000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l5 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l8 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l9 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l10 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l11 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l13 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l14 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + /** + * 1.8v required on LS expansion + * for mezzanine boards + */ + l15 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + regulator-always-on; + }; + + l16 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l17 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l18 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; +}; + +/* + * 2mA drive strength is not enough when connecting multiple + * I2C devices with different pull up resistors. + */ +&i2c2_default { + drive-strength = <16>; +}; + +&i2c4_default { + drive-strength = <16>; +}; + +&i2c6_default { + drive-strength = <16>; +}; + +/* + * GPIO name legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * LSEC = Low Speed External Connector + * HSEC = High Speed External Connector + * + * Line names are taken from the schematic "DragonBoard410c" + * dated monday, august 31, 2015. Page 5 in particular. + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART3. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ + +&msmgpio { + gpio-line-names = + "[UART0_TX]", /* GPIO_0, LSEC pin 5 */ + "[UART0_RX]", /* GPIO_1, LSEC pin 7 */ + "[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */ + "[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */ + "[UART1_TX]", /* GPIO_4, LSEC pin 11 */ + "[UART1_RX]", /* GPIO_5, LSEC pin 13 */ + "[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */ + "[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */ + "[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */ + "[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */ + "[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */ + "[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */ + "GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */ + "GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */ + "[I2C3_SDA]", /* HSEC pin 38 */ + "[I2C3_SCL]", /* HSEC pin 36 */ + "[SPI0_MOSI]", /* LSEC pin 14 */ + "[SPI0_MISO]", /* LSEC pin 10 */ + "[SPI0_CS_N]", /* LSEC pin 12 */ + "[SPI0_CLK]", /* LSEC pin 8 */ + "HDMI_HPD_N", /* GPIO 20 */ + "USR_LED_1_CTRL", + "[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */ + "[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */ + "GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */ + "GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */ + "[CSI0_MCLK]", /* HSEC pin 15 */ + "[CSI1_MCLK]", /* HSEC pin 17 */ + "GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */ + "[I2C2_SDA]", /* HSEC pin 34 */ + "[I2C2_SCL]", /* HSEC pin 32 */ + "DSI2HDMI_INT_N", + "DSI_SW_SEL_APQ", + "GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */ + "GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */ + "GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */ + "GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */ + "FORCED_USB_BOOT", + "SD_CARD_DET_N", + "[WCSS_BT_SSBI]", + "[WCSS_WLAN_DATA_2]", /* GPIO 40 */ + "[WCSS_WLAN_DATA_1]", + "[WCSS_WLAN_DATA_0]", + "[WCSS_WLAN_SET]", + "[WCSS_WLAN_CLK]", + "[WCSS_FM_SSBI]", + "[WCSS_FM_SDI]", + "[WCSS_BT_DAT_CTL]", + "[WCSS_BT_DAT_STB]", + "NC", + "NC", /* GPIO 50 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", /* GPIO 60 */ + "NC", + "NC", + "[CDC_PDM0_CLK]", + "[CDC_PDM0_SYNC]", + "[CDC_PDM0_TX0]", + "[CDC_PDM0_RX0]", + "[CDC_PDM0_RX1]", + "[CDC_PDM0_RX2]", + "GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */ + "NC", /* GPIO 70 */ + "NC", + "NC", + "NC", + "NC", /* GPIO 74 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "BOOT_CONFIG_0", /* GPIO 80 */ + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_3", + "NC", + "NC", + "BOOT_CONFIG_5", + "NC", + "NC", + "NC", + "NC", /* GPIO 90 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", /* GPIO 100 */ + "NC", + "NC", + "NC", + "SSBI_GPS", + "NC", + "NC", + "KEY_VOLP_N", + "NC", + "NC", + "[LS_EXP_MI2S_WS]", /* GPIO 110 */ + "NC", + "NC", + "[LS_EXP_MI2S_SCK]", + "[LS_EXP_MI2S_DATA0]", + "GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */ + "NC", + "[DSI2HDMI_MI2S_WS]", + "[DSI2HDMI_MI2S_SCK]", + "[DSI2HDMI_MI2S_DATA0]", + "USR_LED_2_CTRL", /* GPIO 120 */ + "SB_HS_ID"; + + msmgpio_leds: msmgpio-leds { + pins = "gpio21", "gpio120"; + function = "gpio"; + + output-low; + }; + + usb_id_default: usb-id-default { + pins = "gpio121"; + function = "gpio"; + + drive-strength = <8>; + input-enable; + bias-pull-up; + }; + + adv7533_int_active: adv533-int-active { + pins = "gpio31"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + + adv7533_int_suspend: adv7533-int-suspend { + pins = "gpio31"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + adv7533_switch_active: adv7533-switch-active { + pins = "gpio32"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + + adv7533_switch_suspend: adv7533-switch-suspend { + pins = "gpio32"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + msm_key_volp_n_default: msm-key-volp-n-default { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <8>; + input-enable; + bias-pull-up; + }; +}; + +&pm8916_gpios { + gpio-line-names = + "USR_LED_3_CTRL", + "USR_LED_4_CTRL", + "USB_HUB_RESET_N_PM", + "USB_SW_SEL_PM"; + + usb_hub_reset_pm: usb-hub-reset-pm { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + + input-disable; + output-high; + }; + + usb_hub_reset_pm_device: usb-hub-reset-pm-device { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + + output-low; + }; + + usb_sw_sel_pm: usb-sw-sel-pm { + pins = "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + + power-source = <PM8916_GPIO_VPH>; + input-disable; + output-high; + }; + + usb_sw_sel_pm_device: usb-sw-sel-pm-device { + pins = "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + + power-source = <PM8916_GPIO_VPH>; + input-disable; + output-low; + }; + + pm8916_gpios_leds: pm8916-gpios-leds { + pins = "gpio1", "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + + output-low; + }; +}; + +&pm8916_mpps { + gpio-line-names = + "VDD_PX_BIAS", + "WLAN_LED_CTRL", + "BT_LED_CTRL", + "GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */ + + pinctrl-names = "default"; + pinctrl-0 = <&ls_exp_gpio_f>; + + ls_exp_gpio_f: pm8916-mpp4-state { + pins = "mpp4"; + function = "digital"; + + output-low; + power-source = <PM8916_MPP_L5>; // 1.8V + }; + + pm8916_mpps_leds: pm8916-mpps-state { + pins = "mpp2", "mpp3"; + function = "digital"; + + output-low; + }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi deleted file mode 100644 index 1c097098f1e0..000000000000 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ /dev/null @@ -1,838 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2015, The Linux Foundation. All rights reserved. - */ - -#include "msm8916-pm8916.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> -#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> -#include <dt-bindings/sound/apq8016-lpass.h> - -/ { - aliases { - serial0 = &blsp1_uart2; - serial1 = &blsp1_uart1; - usid0 = &pm8916_0; - i2c0 = &blsp_i2c2; - i2c1 = &blsp_i2c6; - i2c3 = &blsp_i2c4; - spi0 = &blsp_spi5; - spi1 = &blsp_spi3; - }; - - chosen { - stdout-path = "serial0"; - }; - - camera_vdddo_1v8: camera-vdddo-1v8 { - compatible = "regulator-fixed"; - regulator-name = "camera_vdddo"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - camera_vdda_2v8: camera-vdda-2v8 { - compatible = "regulator-fixed"; - regulator-name = "camera_vdda"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - camera_vddd_1v5: camera-vddd-1v5 { - compatible = "regulator-fixed"; - regulator-name = "camera_vddd"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - }; - - reserved-memory { - ramoops@bff00000 { - compatible = "ramoops"; - reg = <0x0 0xbff00000 0x0 0x100000>; - - record-size = <0x20000>; - console-size = <0x20000>; - ftrace-size = <0x20000>; - }; - }; - - usb2513 { - compatible = "smsc,usb3503"; - reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>; - initial-mode = <1>; - }; - - usb_id: usb-id { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb_id_default>; - }; - - hdmi-out { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con: endpoint { - remote-endpoint = <&adv7533_out>; - }; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; - - pinctrl-names = "default"; - pinctrl-0 = <&msm_key_volp_n_default>; - - button@0 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; - }; - }; - - leds { - pinctrl-names = "default"; - pinctrl-0 = <&msmgpio_leds>, - <&pm8916_gpios_leds>, - <&pm8916_mpps_leds>; - - compatible = "gpio-leds"; - - led@1 { - label = "apq8016-sbc:green:user1"; - gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - - led@2 { - label = "apq8016-sbc:green:user2"; - gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - default-state = "off"; - }; - - led@3 { - label = "apq8016-sbc:green:user3"; - gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc1"; - default-state = "off"; - }; - - led@4 { - label = "apq8016-sbc:green:user4"; - gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "none"; - panic-indicator; - default-state = "off"; - }; - - led@5 { - label = "apq8016-sbc:yellow:wlan"; - gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tx"; - default-state = "off"; - }; - - led@6 { - label = "apq8016-sbc:blue:bt"; - gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "bluetooth-power"; - default-state = "off"; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp_i2c2 { - /* On Low speed expansion */ - status = "okay"; - label = "LS-I2C0"; -}; - -&blsp_i2c4 { - /* On High speed expansion */ - status = "okay"; - label = "HS-I2C2"; - - adv_bridge: bridge@39 { - status = "okay"; - - compatible = "adi,adv7533"; - reg = <0x39>; - - interrupt-parent = <&msmgpio>; - interrupts = <31 IRQ_TYPE_EDGE_FALLING>; - - adi,dsi-lanes = <4>; - clocks = <&rpmcc RPM_SMD_BB_CLK2>; - clock-names = "cec"; - - pd-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; - - avdd-supply = <&pm8916_l6>; - v1p2-supply = <&pm8916_l6>; - v3p3-supply = <&pm8916_l17>; - - pinctrl-names = "default","sleep"; - pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>; - pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>; - #sound-dai-cells = <1>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7533_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - - port@1 { - reg = <1>; - adv7533_out: endpoint { - remote-endpoint = <&hdmi_con>; - }; - }; - }; - }; -}; - -&blsp_i2c6 { - /* On Low speed expansion */ - status = "okay"; - label = "LS-I2C1"; -}; - -&blsp_spi3 { - /* On High speed expansion */ - status = "okay"; - label = "HS-SPI1"; -}; - -&blsp_spi5 { - /* On Low speed expansion */ - status = "okay"; - label = "LS-SPI0"; -}; - -&blsp1_uart1 { - status = "okay"; - label = "LS-UART0"; -}; - -&blsp1_uart2 { - status = "okay"; - label = "LS-UART1"; -}; - -&camss { - status = "okay"; - ports { - port@0 { - reg = <0>; - csiphy0_ep: endpoint { - clock-lanes = <1>; - data-lanes = <0 2>; - remote-endpoint = <&ov5640_ep>; - status = "okay"; - }; - }; - }; -}; - -&cci { - status = "okay"; -}; - -&cci_i2c0 { - camera_rear@3b { - compatible = "ovti,ov5640"; - reg = <0x3b>; - - enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>; - reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&camera_rear_default>; - - clocks = <&gcc GCC_CAMSS_MCLK0_CLK>; - clock-names = "xclk"; - clock-frequency = <23880000>; - - vdddo-supply = <&camera_vdddo_1v8>; - vdda-supply = <&camera_vdda_2v8>; - vddd-supply = <&camera_vddd_1v5>; - - /* No camera mezzanine by default */ - status = "disabled"; - - port { - ov5640_ep: endpoint { - clock-lanes = <1>; - data-lanes = <0 2>; - remote-endpoint = <&csiphy0_ep>; - }; - }; - }; -}; - -&dsi0_out { - data-lanes = <0 1 2 3>; - remote-endpoint = <&adv7533_in>; -}; - -&lpass { - status = "okay"; -}; - -&mdss { - status = "okay"; -}; - -&mpss { - status = "okay"; - - firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn"; -}; - -&pm8916_resin { - status = "okay"; - linux,code = <KEY_VOLUMEDOWN>; -}; - -&pronto { - status = "okay"; - - firmware-name = "qcom/apq8016/wcnss.mbn"; -}; - -&sdhc_1 { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; -}; - -&sdhc_2 { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; - - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; -}; - -&sound { - status = "okay"; - - pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; - pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; - pinctrl-names = "default", "sleep"; - qcom,model = "DB410c"; - qcom,audio-routing = - "AMIC2", "MIC BIAS Internal2", - "AMIC3", "MIC BIAS External1"; - - external-dai-link@0 { - link-name = "ADV7533"; - cpu { - sound-dai = <&lpass MI2S_QUATERNARY>; - }; - codec { - sound-dai = <&adv_bridge 0>; - }; - }; - - internal-codec-playback-dai-link@0 { - link-name = "WCD"; - cpu { - sound-dai = <&lpass MI2S_PRIMARY>; - }; - codec { - sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; - }; - }; - - internal-codec-capture-dai-link@0 { - link-name = "WCD-Capture"; - cpu { - sound-dai = <&lpass MI2S_TERTIARY>; - }; - codec { - sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; - }; - }; -}; - -&usb { - status = "okay"; - extcon = <&usb_id>, <&usb_id>; - - pinctrl-names = "default", "device"; - pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>; - pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>; -}; - -&usb_hs_phy { - extcon = <&usb_id>; -}; - -&wcd_codec { - clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; - clock-names = "mclk"; - qcom,mbhc-vthreshold-low = <75 150 237 450 500>; - qcom,mbhc-vthreshold-high = <75 150 237 450 500>; -}; - -&wcnss_ctrl { - firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin"; -}; - -/* Enable CoreSight */ -&cti0 { status = "okay"; }; -&cti1 { status = "okay"; }; -&cti12 { status = "okay"; }; -&cti13 { status = "okay"; }; -&cti14 { status = "okay"; }; -&cti15 { status = "okay"; }; -&debug0 { status = "okay"; }; -&debug1 { status = "okay"; }; -&debug2 { status = "okay"; }; -&debug3 { status = "okay"; }; -&etf { status = "okay"; }; -&etm0 { status = "okay"; }; -&etm1 { status = "okay"; }; -&etm2 { status = "okay"; }; -&etm3 { status = "okay"; }; -&etr { status = "okay"; }; -&funnel0 { status = "okay"; }; -&funnel1 { status = "okay"; }; -&replicator { status = "okay"; }; -&stm { status = "okay"; }; -&tpiu { status = "okay"; }; - -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <375000>; - regulator-max-microvolt = <1562000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l1 { - regulator-min-microvolt = <375000>; - regulator-max-microvolt = <1525000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l5 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l8 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l9 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l10 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l11 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l13 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l14 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - /** - * 1.8v required on LS expansion - * for mezzanine boards - */ - l15 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - regulator-always-on; - }; - - l16 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l17 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l18 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; -}; - -/* - * 2mA drive strength is not enough when connecting multiple - * I2C devices with different pull up resistors. - */ -&i2c2_default { - drive-strength = <16>; -}; - -&i2c4_default { - drive-strength = <16>; -}; - -&i2c6_default { - drive-strength = <16>; -}; - -/* - * GPIO name legend: proper name = the GPIO line is used as GPIO - * NC = not connected (pin out but not routed from the chip to - * anything the board) - * "[PER]" = pin is muxed for [peripheral] (not GPIO) - * LSEC = Low Speed External Connector - * HSEC = High Speed External Connector - * - * Line names are taken from the schematic "DragonBoard410c" - * dated monday, august 31, 2015. Page 5 in particular. - * - * For the lines routed to the external connectors the - * lines are named after the 96Boards CE Specification 1.0, - * Appendix "Expansion Connector Signal Description". - * - * When the 96Board naming of a line and the schematic name of - * the same line are in conflict, the 96Board specification - * takes precedence, which means that the external UART on the - * LSEC is named UART0 while the schematic and SoC names this - * UART3. This is only for the informational lines i.e. "[FOO]", - * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only - * ones actually used for GPIO. - */ - -&msmgpio { - gpio-line-names = - "[UART0_TX]", /* GPIO_0, LSEC pin 5 */ - "[UART0_RX]", /* GPIO_1, LSEC pin 7 */ - "[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */ - "[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */ - "[UART1_TX]", /* GPIO_4, LSEC pin 11 */ - "[UART1_RX]", /* GPIO_5, LSEC pin 13 */ - "[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */ - "[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */ - "[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */ - "[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */ - "[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */ - "[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */ - "GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */ - "GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */ - "[I2C3_SDA]", /* HSEC pin 38 */ - "[I2C3_SCL]", /* HSEC pin 36 */ - "[SPI0_MOSI]", /* LSEC pin 14 */ - "[SPI0_MISO]", /* LSEC pin 10 */ - "[SPI0_CS_N]", /* LSEC pin 12 */ - "[SPI0_CLK]", /* LSEC pin 8 */ - "HDMI_HPD_N", /* GPIO 20 */ - "USR_LED_1_CTRL", - "[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */ - "[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */ - "GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */ - "GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */ - "[CSI0_MCLK]", /* HSEC pin 15 */ - "[CSI1_MCLK]", /* HSEC pin 17 */ - "GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */ - "[I2C2_SDA]", /* HSEC pin 34 */ - "[I2C2_SCL]", /* HSEC pin 32 */ - "DSI2HDMI_INT_N", - "DSI_SW_SEL_APQ", - "GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */ - "GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */ - "GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */ - "GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */ - "FORCED_USB_BOOT", - "SD_CARD_DET_N", - "[WCSS_BT_SSBI]", - "[WCSS_WLAN_DATA_2]", /* GPIO 40 */ - "[WCSS_WLAN_DATA_1]", - "[WCSS_WLAN_DATA_0]", - "[WCSS_WLAN_SET]", - "[WCSS_WLAN_CLK]", - "[WCSS_FM_SSBI]", - "[WCSS_FM_SDI]", - "[WCSS_BT_DAT_CTL]", - "[WCSS_BT_DAT_STB]", - "NC", - "NC", /* GPIO 50 */ - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", /* GPIO 60 */ - "NC", - "NC", - "[CDC_PDM0_CLK]", - "[CDC_PDM0_SYNC]", - "[CDC_PDM0_TX0]", - "[CDC_PDM0_RX0]", - "[CDC_PDM0_RX1]", - "[CDC_PDM0_RX2]", - "GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */ - "NC", /* GPIO 70 */ - "NC", - "NC", - "NC", - "NC", /* GPIO 74 */ - "NC", - "NC", - "NC", - "NC", - "NC", - "BOOT_CONFIG_0", /* GPIO 80 */ - "BOOT_CONFIG_1", - "BOOT_CONFIG_2", - "BOOT_CONFIG_3", - "NC", - "NC", - "BOOT_CONFIG_5", - "NC", - "NC", - "NC", - "NC", /* GPIO 90 */ - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", /* GPIO 100 */ - "NC", - "NC", - "NC", - "SSBI_GPS", - "NC", - "NC", - "KEY_VOLP_N", - "NC", - "NC", - "[LS_EXP_MI2S_WS]", /* GPIO 110 */ - "NC", - "NC", - "[LS_EXP_MI2S_SCK]", - "[LS_EXP_MI2S_DATA0]", - "GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */ - "NC", - "[DSI2HDMI_MI2S_WS]", - "[DSI2HDMI_MI2S_SCK]", - "[DSI2HDMI_MI2S_DATA0]", - "USR_LED_2_CTRL", /* GPIO 120 */ - "SB_HS_ID"; - - msmgpio_leds: msmgpio-leds { - pins = "gpio21", "gpio120"; - function = "gpio"; - - output-low; - }; - - usb_id_default: usb-id-default { - pins = "gpio121"; - function = "gpio"; - - drive-strength = <8>; - input-enable; - bias-pull-up; - }; - - adv7533_int_active: adv533-int-active { - pins = "gpio31"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - }; - - adv7533_int_suspend: adv7533-int-suspend { - pins = "gpio31"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - adv7533_switch_active: adv7533-switch-active { - pins = "gpio32"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - }; - - adv7533_switch_suspend: adv7533-switch-suspend { - pins = "gpio32"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - msm_key_volp_n_default: msm-key-volp-n-default { - pins = "gpio107"; - function = "gpio"; - - drive-strength = <8>; - input-enable; - bias-pull-up; - }; -}; - -&pm8916_gpios { - gpio-line-names = - "USR_LED_3_CTRL", - "USR_LED_4_CTRL", - "USB_HUB_RESET_N_PM", - "USB_SW_SEL_PM"; - - usb_hub_reset_pm: usb-hub-reset-pm { - pins = "gpio3"; - function = PMIC_GPIO_FUNC_NORMAL; - - input-disable; - output-high; - }; - - usb_hub_reset_pm_device: usb-hub-reset-pm-device { - pins = "gpio3"; - function = PMIC_GPIO_FUNC_NORMAL; - - output-low; - }; - - usb_sw_sel_pm: usb-sw-sel-pm { - pins = "gpio4"; - function = PMIC_GPIO_FUNC_NORMAL; - - power-source = <PM8916_GPIO_VPH>; - input-disable; - output-high; - }; - - usb_sw_sel_pm_device: usb-sw-sel-pm-device { - pins = "gpio4"; - function = PMIC_GPIO_FUNC_NORMAL; - - power-source = <PM8916_GPIO_VPH>; - input-disable; - output-low; - }; - - pm8916_gpios_leds: pm8916-gpios-leds { - pins = "gpio1", "gpio2"; - function = PMIC_GPIO_FUNC_NORMAL; - - output-low; - }; -}; - -&pm8916_mpps { - gpio-line-names = - "VDD_PX_BIAS", - "WLAN_LED_CTRL", - "BT_LED_CTRL", - "GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */ - - pinctrl-names = "default"; - pinctrl-0 = <&ls_exp_gpio_f>; - - ls_exp_gpio_f: pm8916-mpp4-state { - pins = "mpp4"; - function = "digital"; - - output-low; - power-source = <PM8916_MPP_L5>; // 1.8V - }; - - pm8916_mpps_leds: pm8916-mpps-state { - pins = "mpp2", "mpp3"; - function = "digital"; - - output-low; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index 757afa27424d..d01a512634cf 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -5,9 +5,1077 @@ /dts-v1/; -#include "apq8096-db820c.dtsi" +#include "msm8996.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> + +/* + * GPIO name legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * LSEC = Low Speed External Connector + * P HSEC = Primary High Speed External Connector + * S HSEC = Secondary High Speed External Connector + * J14 = Camera Connector + * TP = Test Points + * + * Line names are taken from the schematic "DragonBoard 820c", + * drawing no: LM25-P2751-1 + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART3. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ / { model = "Qualcomm Technologies, Inc. DB820c"; compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096"; + + aliases { + serial0 = &blsp2_uart2; + serial1 = &blsp2_uart3; + serial2 = &blsp1_uart2; + i2c0 = &blsp1_i2c3; + i2c1 = &blsp2_i2c1; + i2c2 = &blsp2_i2c1; + spi0 = &blsp1_spi1; + spi1 = &blsp2_spi6; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + clocks { + compatible = "simple-bus"; + divclk4: divclk4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "divclk4"; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk4_pin_a>; + }; + + div1_mclk: divclk1 { + compatible = "gpio-gate-clock"; + pinctrl-0 = <&audio_mclk>; + pinctrl-names = "default"; + clocks = <&rpmcc RPM_SMD_DIV_CLK1>; + #clock-cells = <0>; + enable-gpios = <&pm8994_gpios 15 0>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&volume_up_gpio>; + + button@0 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; + }; + }; + + usb2_id: usb2-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_vbus_det_gpio>; + }; + + usb3_id: usb3-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_vbus_det_gpio>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + wlan_en: wlan-en-1-8v { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_gpios>; + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8994_gpios 8 0>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&blsp1_i2c3 { + /* On Low speed expansion */ + label = "LS-I2C0"; + status = "okay"; +}; + +&blsp1_spi1 { + /* On Low speed expansion */ + label = "LS-SPI0"; + status = "okay"; +}; + +&blsp1_uart2 { + label = "BT-UART"; + status = "okay"; + + bluetooth { + compatible = "qcom,qca6174-bt"; + + /* bt_disable_n gpio */ + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + + clocks = <&divclk4>; + }; +}; + +&adsp_pil { + status = "okay"; +}; + +&blsp2_i2c1 { + /* On High speed expansion */ + label = "HS-I2C2"; + status = "okay"; +}; + +&blsp2_i2c1 { + /* On Low speed expansion */ + label = "LS-I2C1"; + status = "okay"; +}; + +&blsp2_spi6 { + /* On High speed expansion */ + label = "HS-SPI1"; + status = "okay"; +}; + +&blsp2_uart2 { + label = "LS-UART1"; + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_2pins_default>; + pinctrl-1 = <&blsp2_uart2_2pins_sleep>; +}; + +&blsp2_uart3 { + label = "LS-UART0"; + status = "disabled"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart3_4pins_default>; + pinctrl-1 = <&blsp2_uart3_4pins_sleep>; +}; + +&camss { + vdda-supply = <&vreg_l2a_1p25>; +}; + +&gpu { + status = "okay"; +}; + +&hdmi { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; + pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; + + core-vdda-supply = <&vreg_l12a_1p8>; + core-vcc-supply = <&vreg_s4a_1p8>; +}; + +&hdmi_phy { + status = "okay"; + + vddio-supply = <&vreg_l12a_1p8>; + vcca-supply = <&vreg_l28a_0p925>; + #phy-cells = <0>; +}; + +&hsusb_phy1 { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&hsusb_phy2 { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&mdp { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mmcc { + vdd-gfx-supply = <&vdd_gfx>; +}; + +&pm8994_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&tlmm { + gpio-line-names = + "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */ + "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */ + "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */ + "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */ + "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */ + "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */ + "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */ + "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */ + "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */ + "TP93", /* GPIO_9 */ + "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */ + "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */ + "NC", /* GPIO_12 */ + "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */ + "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */ + "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */ + "TP99", /* GPIO_16 */ + "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */ + "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */ + "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */ + "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */ + "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */ + "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */ + "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */ + "GPIO-D", /* GPIO_24, LSEC pin 26 */ + "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */ + "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */ + "BLSP6_I2C_SDA", /* GPIO_27 */ + "BLSP6_I2C_SCL", /* GPIO_28 */ + "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */ + "GPIO30", /* GPIO_30, S HSEC pin 4 */ + "HDMI_CEC", /* GPIO_31 */ + "HDMI_DDC_CLOCK", /* GPIO_32 */ + "HDMI_DDC_DATA", /* GPIO_33 */ + "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */ + "PCIE0_RST_N", /* GPIO_35 */ + "PCIE0_CLKREQ_N", /* GPIO_36 */ + "PCIE0_WAKE", /* GPIO_37 */ + "SD_CARD_DET_N", /* GPIO_38 */ + "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */ + "W_DISABLE_N", /* GPIO_40 */ + "[BLSP9_UART_TX]", /* GPIO_41 */ + "[BLSP9_UART_RX]", /* GPIO_42 */ + "[BLSP2_UART_CTS_N]", /* GPIO_43 */ + "[BLSP2_UART_RFR_N]", /* GPIO_44 */ + "[BLSP3_UART_TX]", /* GPIO_45 */ + "[BLSP3_UART_RX]", /* GPIO_46 */ + "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */ + "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */ + "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */ + "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */ + "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */ + "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */ + "[CODEC_INT1_N]", /* GPIO_53 */ + "[CODEC_INT2_N]", /* GPIO_54 */ + "[BLSP7_I2C_SDA]", /* GPIO_55 */ + "[BLSP7_I2C_SCL]", /* GPIO_56 */ + "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */ + "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */ + "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */ + "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */ + "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */ + "GPIO-E", /* GPIO_62, LSEC pin 27 */ + "TP87", /* GPIO_63 */ + "[CODEC_RST_N]", /* GPIO_64 */ + "[PCM1_CLK]", /* GPIO_65 */ + "[PCM1_SYNC]", /* GPIO_66 */ + "[PCM1_DIN]", /* GPIO_67 */ + "[PCM1_DOUT]", /* GPIO_68 */ + "AUDIO_REF_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "NC", /* GPIO_73 */ + "NC", /* GPIO_74 */ + "NC", /* GPIO_75 */ + "NC", /* GPIO_76 */ + "TP94", /* GPIO_77 */ + "NC", /* GPIO_78 */ + "TP95", /* GPIO_79 */ + "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */ + "TP88", /* GPIO_81 */ + "TP89", /* GPIO_82 */ + "TP90", /* GPIO_83 */ + "TP91", /* GPIO_84 */ + "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */ + "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */ + "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */ + "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */ + "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */ + "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */ + "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */ + "NC", /* GPIO_92 */ + "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */ + "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */ + "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */ + "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */ + "NC", /* GPIO_97 */ + "CAM1_STANDBY_N", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "NC", /* GPIO_100 */ + "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */ + "BOOT_CONFIG1", /* GPIO_102 */ + "USB_HUB_RESET", /* GPIO_103 */ + "CAM1_RST_N", /* GPIO_104 */ + "NC", /* GPIO_105 */ + "NC", /* GPIO_106 */ + "NC", /* GPIO_107 */ + "NC", /* GPIO_108 */ + "NC", /* GPIO_109 */ + "NC", /* GPIO_110 */ + "NC", /* GPIO_111 */ + "NC", /* GPIO_112 */ + "PMI8994_BUA", /* GPIO_113 */ + "PCIE2_RST_N", /* GPIO_114 */ + "PCIE2_CLKREQ_N", /* GPIO_115 */ + "PCIE2_WAKE", /* GPIO_116 */ + "SSC_IRQ_0", /* GPIO_117 */ + "SSC_IRQ_1", /* GPIO_118 */ + "SSC_IRQ_2", /* GPIO_119 */ + "NC", /* GPIO_120 */ + "GPIO121", /* GPIO_121, S HSEC pin 2 */ + "NC", /* GPIO_122 */ + "SSC_IRQ_6", /* GPIO_123 */ + "SSC_IRQ_7", /* GPIO_124 */ + "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */ + "BOOT_CONFIG5", /* GPIO_126 */ + "NC", /* GPIO_127 */ + "NC", /* GPIO_128 */ + "BOOT_CONFIG7", /* GPIO_129 */ + "PCIE1_RST_N", /* GPIO_130 */ + "PCIE1_CLKREQ_N", /* GPIO_131 */ + "PCIE1_WAKE", /* GPIO_132 */ + "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */ + "NC", /* GPIO_134 */ + "NC", /* GPIO_135 */ + "BOOT_CONFIG8", /* GPIO_136 */ + "NC", /* GPIO_137 */ + "NC", /* GPIO_138 */ + "GPS_SSBI2", /* GPIO_139 */ + "GPS_SSBI1", /* GPIO_140 */ + "NC", /* GPIO_141 */ + "NC", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "BOOT_CONFIG6", /* GPIO_144 */ + "NC", /* GPIO_145 */ + "NC", /* GPIO_146 */ + "NC", /* GPIO_147 */ + "NC", /* GPIO_148 */ + "NC"; /* GPIO_149 */ + + sdc2_cd_on: sdc2_cd_on { + mux { + pins = "gpio38"; + function = "gpio"; + }; + + config { + pins = "gpio38"; + bias-pull-up; /* pull up */ + drive-strength = <16>; /* 16 MA */ + }; + }; + + sdc2_cd_off: sdc2_cd_off { + mux { + pins = "gpio38"; + function = "gpio"; + }; + + config { + pins = "gpio38"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + hdmi_hpd_active: hdmi_hpd_active { + mux { + pins = "gpio34"; + function = "hdmi_hot"; + }; + + config { + pins = "gpio34"; + bias-pull-down; + drive-strength = <16>; + }; + }; + + hdmi_hpd_suspend: hdmi_hpd_suspend { + mux { + pins = "gpio34"; + function = "hdmi_hot"; + }; + + config { + pins = "gpio34"; + bias-pull-down; + drive-strength = <2>; + }; + }; + + hdmi_ddc_active: hdmi_ddc_active { + mux { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; + }; + + config { + pins = "gpio32", "gpio33"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + hdmi_ddc_suspend: hdmi_ddc_suspend { + mux { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; + }; + + config { + pins = "gpio32", "gpio33"; + drive-strength = <2>; + bias-pull-down; + }; + }; +}; + +&pcie0 { + status = "okay"; + perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; + vddpe-3v3-supply = <&wlan_en>; + vdda-supply = <&vreg_l28a_0p925>; +}; + +&pcie1 { + status = "okay"; + perst-gpio = <&tlmm 130 GPIO_ACTIVE_LOW>; + vdda-supply = <&vreg_l28a_0p925>; +}; + +&pcie2 { + status = "okay"; + perst-gpio = <&tlmm 114 GPIO_ACTIVE_LOW>; + vdda-supply = <&vreg_l28a_0p925>; +}; + +&pcie_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; +}; + +&pm8994_gpios { + gpio-line-names = + "NC", + "KEY_VOLP_N", + "NC", + "BL1_PWM", + "GPIO-F", /* BL0_PWM, LSEC pin 28 */ + "BL1_EN", + "NC", + "WLAN_EN", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "DIVCLK1", + "DIVCLK2", + "DIVCLK3", + "DIVCLK4", + "BT_EN", + "PMIC_SLB", + "PMIC_BUA", + "USB_VBUS_DET"; + + pinctrl-names = "default"; + pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>; + + ls_exp_gpio_f: pm8994_gpio5 { + pinconf { + pins = "gpio5"; + output-low; + power-source = <2>; // PM8994_GPIO_S4, 1.8V + }; + }; + + bt_en_gpios: bt_en_gpios { + pinconf { + pins = "gpio19"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = <PM8994_GPIO_S4>; // 1.8V + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + bias-pull-down; + }; + }; + + wlan_en_gpios: wlan_en_gpios { + pinconf { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = <PM8994_GPIO_S4>; // 1.8V + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + bias-pull-down; + }; + }; + + audio_mclk: clk_div1 { + pinconf { + pins = "gpio15"; + function = "func1"; + power-source = <PM8994_GPIO_S4>; // 1.8V + }; + }; + + volume_up_gpio: pm8996_gpio2 { + pinconf { + pins = "gpio2"; + function = "normal"; + input-enable; + drive-push-pull; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; // 1.8V + }; + }; + + divclk4_pin_a: divclk4 { + pinconf { + pins = "gpio18"; + function = PMIC_GPIO_FUNC_FUNC2; + + bias-disable; + power-source = <PM8994_GPIO_S4>; + }; + }; + + usb3_vbus_det_gpio: pm8996_gpio22 { + pinconf { + pins = "gpio22"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-down; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; // 1.8V + }; + }; +}; + +&pm8994_mpps { + gpio-line-names = + "VDDPX_BIAS", + "WIFI_LED", + "NC", + "BT_LED", + "PM_MPP05", + "PM_MPP06", + "PM_MPP07", + "NC"; +}; + +&pm8994_spmi_regulators { + qcom,saw-reg = <&saw3>; + s9 { + qcom,saw-slave; + }; + s10 { + qcom,saw-slave; + }; + s11 { + qcom,saw-leader; + regulator-always-on; + regulator-min-microvolt = <980000>; + regulator-max-microvolt = <980000>; + }; +}; + +&pmi8994_gpios { + gpio-line-names = + "NC", + "SPKR_AMP_EN1", + "SPKR_AMP_EN2", + "TP61", + "NC", + "USB2_VBUS_DET", + "NC", + "NC", + "NC", + "NC"; + + usb2_vbus_det_gpio: pmi8996_gpio6 { + pinconf { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-down; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; // 1.8V + }; + }; +}; + +&pmi8994_spmi_regulators { + vdd_gfx: s2@1700 { + reg = <0x1700 0x100>; + regulator-name = "VDD_GFX"; + regulator-min-microvolt = <980000>; + regulator-max-microvolt = <980000>; + }; +}; + +&rpm_requests { + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l1-supply = <&vreg_s1b_1p025>; + vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; + vdd_l3_l11-supply = <&vreg_s3a_1p3>; + vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; + vdd_l5_l7-supply = <&vreg_s5a_2p15>; + vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; + vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; + vdd_l14_l15-supply = <&vreg_s5a_2p15>; + vdd_l17_l29-supply = <&vph_pwr_bbyp>; + vdd_l20_l21-supply = <&vph_pwr_bbyp>; + vdd_l25-supply = <&vreg_s3a_1p3>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p3: s3 { + regulator-name = "vreg_s3a_1p3"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + /** + * 1.8v required on LS expansion + * for mezzanine boards + */ + vreg_s4a_1p8: s4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + vreg_s5a_2p15: s5 { + regulator-name = "vreg_s5a_2p15"; + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + vreg_s7a_1p0: s7 { + regulator-name = "vreg_s7a_1p0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l1a_1p0: l1 { + regulator-name = "vreg_l1a_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l2a_1p25: l2 { + regulator-name = "vreg_l2a_1p25"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + vreg_l3a_0p875: l3 { + regulator-name = "vreg_l3a_0p875"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + }; + vreg_l4a_1p225: l4 { + regulator-name = "vreg_l4a_1p225"; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + vreg_l6a_1p2: l6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l8a_1p8: l8 { + regulator-name = "vreg_l8a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l9a_1p8: l9 { + regulator-name = "vreg_l9a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l10a_1p8: l10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l11a_1p15: l11 { + regulator-name = "vreg_l11a_1p15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + vreg_l12a_1p8: l12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l13a_2p95: l13 { + regulator-name = "vreg_l13a_2p95"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + vreg_l14a_1p8: l14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l15a_1p8: l15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + vreg_l17a_2p8: l17 { + regulator-name = "vreg_l17a_2p8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + vreg_l18a_2p85: l18 { + regulator-name = "vreg_l18a_2p85"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2900000>; + }; + vreg_l19a_2p8: l19 { + regulator-name = "vreg_l19a_2p8"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + vreg_l20a_2p95: l20 { + regulator-name = "vreg_l20a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-name = "vreg_l21a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + vreg_l22a_3p0: l22 { + regulator-name = "vreg_l22a_3p0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + vreg_l23a_2p8: l23 { + regulator-name = "vreg_l23a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l24a_3p075: l24 { + regulator-name = "vreg_l24a_3p075"; + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + vreg_l25a_1p2: l25 { + regulator-name = "vreg_l25a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l26a_0p8: l27 { + regulator-name = "vreg_l26a_0p8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l28a_0p925: l28 { + regulator-name = "vreg_l28a_0p925"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + vreg_l29a_2p8: l29 { + regulator-name = "vreg_l29a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l30a_1p8: l30 { + regulator-name = "vreg_l30a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l32a_1p8: l32 { + regulator-name = "vreg_l32a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-name = "vreg_lvs1a_1p8"; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-name = "vreg_lvs2a_1p8"; + }; + }; + + pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + vph_pwr_bbyp: boost-bypass { + regulator-name = "vph_pwr_bbyp"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vreg_s1b_1p025: s1 { + regulator-name = "vreg_s1b_1p025"; + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + }; +}; + +&sdhc2 { + /* External SD card */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + status = "okay"; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&sound { + compatible = "qcom,apq8096-sndcard"; + model = "DB820c"; + audio-routing = "RX_BIAS", "MCLK", + "MM_DL1", "MultiMedia1 Playback", + "MM_DL2", "MultiMedia2 Playback", + "MultiMedia3 Capture", "MM_UL3"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + hdmi-dai-link { + link-name = "HDMI"; + cpu { + sound-dai = <&q6afedai HDMI_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&hdmi 0>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_6_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 6>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 1>; + }; + }; +}; + +&ufsphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vddp-ref-clk-supply = <&vreg_l25a_1p2>; +}; + +&ufshc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l25a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + + vcc-max-microamp = <600000>; + vccq-max-microamp = <450000>; + vccq2-max-microamp = <450000>; +}; + +&usb2 { + status = "okay"; + extcon = <&usb2_id>; + + dwc3@7600000 { + extcon = <&usb2_id>; + dr_mode = "otg"; + maximum-speed = "high-speed"; + }; +}; + +&usb3 { + status = "okay"; + extcon = <&usb3_id>; + + dwc3@6a00000 { + extcon = <&usb3_id>; + dr_mode = "otg"; + }; +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + +}; + +&venus { + status = "okay"; +}; + +&wcd9335 { + clock-names = "mclk", "slimbus"; + clocks = <&div1_mclk>, + <&rpmcc RPM_SMD_BB_CLK1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi deleted file mode 100644 index eca428ab2517..000000000000 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ /dev/null @@ -1,1076 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved. - */ - -#include "msm8996.dtsi" -#include "pm8994.dtsi" -#include "pmi8994.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> -#include <dt-bindings/sound/qcom,q6afe.h> -#include <dt-bindings/sound/qcom,q6asm.h> - -/* - * GPIO name legend: proper name = the GPIO line is used as GPIO - * NC = not connected (pin out but not routed from the chip to - * anything the board) - * "[PER]" = pin is muxed for [peripheral] (not GPIO) - * LSEC = Low Speed External Connector - * P HSEC = Primary High Speed External Connector - * S HSEC = Secondary High Speed External Connector - * J14 = Camera Connector - * TP = Test Points - * - * Line names are taken from the schematic "DragonBoard 820c", - * drawing no: LM25-P2751-1 - * - * For the lines routed to the external connectors the - * lines are named after the 96Boards CE Specification 1.0, - * Appendix "Expansion Connector Signal Description". - * - * When the 96Board naming of a line and the schematic name of - * the same line are in conflict, the 96Board specification - * takes precedence, which means that the external UART on the - * LSEC is named UART0 while the schematic and SoC names this - * UART3. This is only for the informational lines i.e. "[FOO]", - * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only - * ones actually used for GPIO. - */ - -/ { - aliases { - serial0 = &blsp2_uart2; - serial1 = &blsp2_uart3; - serial2 = &blsp1_uart2; - i2c0 = &blsp1_i2c3; - i2c1 = &blsp2_i2c1; - i2c2 = &blsp2_i2c1; - spi0 = &blsp1_spi1; - spi1 = &blsp2_spi6; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - clocks { - compatible = "simple-bus"; - divclk4: divclk4 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "divclk4"; - - pinctrl-names = "default"; - pinctrl-0 = <&divclk4_pin_a>; - }; - - div1_mclk: divclk1 { - compatible = "gpio-gate-clock"; - pinctrl-0 = <&audio_mclk>; - pinctrl-names = "default"; - clocks = <&rpmcc RPM_SMD_DIV_CLK1>; - #clock-cells = <0>; - enable-gpios = <&pm8994_gpios 15 0>; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; - - pinctrl-names = "default"; - pinctrl-0 = <&volume_up_gpio>; - - button@0 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; - }; - }; - - usb2_id: usb2-id { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb2_vbus_det_gpio>; - }; - - usb3_id: usb3-id { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb3_vbus_det_gpio>; - }; - - vph_pwr: vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "vph_pwr"; - regulator-always-on; - regulator-boot-on; - - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - }; - - wlan_en: wlan-en-1-8v { - pinctrl-names = "default"; - pinctrl-0 = <&wlan_en_gpios>; - compatible = "regulator-fixed"; - regulator-name = "wlan-en-regulator"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - gpio = <&pm8994_gpios 8 0>; - - /* WLAN card specific delay */ - startup-delay-us = <70000>; - enable-active-high; - }; -}; - -&blsp1_i2c3 { - /* On Low speed expansion */ - label = "LS-I2C0"; - status = "okay"; -}; - -&blsp1_spi1 { - /* On Low speed expansion */ - label = "LS-SPI0"; - status = "okay"; -}; - -&blsp1_uart2 { - label = "BT-UART"; - status = "okay"; - - bluetooth { - compatible = "qcom,qca6174-bt"; - - /* bt_disable_n gpio */ - enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; - - clocks = <&divclk4>; - }; -}; - -&adsp_pil { - status = "okay"; -}; - -&blsp2_i2c1 { - /* On High speed expansion */ - label = "HS-I2C2"; - status = "okay"; -}; - -&blsp2_i2c1 { - /* On Low speed expansion */ - label = "LS-I2C1"; - status = "okay"; -}; - -&blsp2_spi6 { - /* On High speed expansion */ - label = "HS-SPI1"; - status = "okay"; -}; - -&blsp2_uart2 { - label = "LS-UART1"; - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart2_2pins_default>; - pinctrl-1 = <&blsp2_uart2_2pins_sleep>; -}; - -&blsp2_uart3 { - label = "LS-UART0"; - status = "disabled"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart3_4pins_default>; - pinctrl-1 = <&blsp2_uart3_4pins_sleep>; -}; - -&camss { - vdda-supply = <&vreg_l2a_1p25>; -}; - -&gpu { - status = "okay"; -}; - -&hdmi { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; - pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; - - core-vdda-supply = <&vreg_l12a_1p8>; - core-vcc-supply = <&vreg_s4a_1p8>; -}; - -&hdmi_phy { - status = "okay"; - - vddio-supply = <&vreg_l12a_1p8>; - vcca-supply = <&vreg_l28a_0p925>; - #phy-cells = <0>; -}; - -&hsusb_phy1 { - status = "okay"; - - vdda-pll-supply = <&vreg_l12a_1p8>; - vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; -}; - -&hsusb_phy2 { - status = "okay"; - - vdda-pll-supply = <&vreg_l12a_1p8>; - vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; -}; - -&mdp { - status = "okay"; -}; - -&mdss { - status = "okay"; -}; - -&mmcc { - vdd-gfx-supply = <&vdd_gfx>; -}; - -&pm8994_resin { - status = "okay"; - linux,code = <KEY_VOLUMEDOWN>; -}; - -&tlmm { - gpio-line-names = - "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */ - "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */ - "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */ - "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */ - "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */ - "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */ - "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */ - "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */ - "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */ - "TP93", /* GPIO_9 */ - "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */ - "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */ - "NC", /* GPIO_12 */ - "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */ - "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */ - "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */ - "TP99", /* GPIO_16 */ - "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */ - "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */ - "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */ - "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */ - "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */ - "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */ - "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */ - "GPIO-D", /* GPIO_24, LSEC pin 26 */ - "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */ - "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */ - "BLSP6_I2C_SDA", /* GPIO_27 */ - "BLSP6_I2C_SCL", /* GPIO_28 */ - "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */ - "GPIO30", /* GPIO_30, S HSEC pin 4 */ - "HDMI_CEC", /* GPIO_31 */ - "HDMI_DDC_CLOCK", /* GPIO_32 */ - "HDMI_DDC_DATA", /* GPIO_33 */ - "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */ - "PCIE0_RST_N", /* GPIO_35 */ - "PCIE0_CLKREQ_N", /* GPIO_36 */ - "PCIE0_WAKE", /* GPIO_37 */ - "SD_CARD_DET_N", /* GPIO_38 */ - "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */ - "W_DISABLE_N", /* GPIO_40 */ - "[BLSP9_UART_TX]", /* GPIO_41 */ - "[BLSP9_UART_RX]", /* GPIO_42 */ - "[BLSP2_UART_CTS_N]", /* GPIO_43 */ - "[BLSP2_UART_RFR_N]", /* GPIO_44 */ - "[BLSP3_UART_TX]", /* GPIO_45 */ - "[BLSP3_UART_RX]", /* GPIO_46 */ - "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */ - "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */ - "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */ - "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */ - "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */ - "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */ - "[CODEC_INT1_N]", /* GPIO_53 */ - "[CODEC_INT2_N]", /* GPIO_54 */ - "[BLSP7_I2C_SDA]", /* GPIO_55 */ - "[BLSP7_I2C_SCL]", /* GPIO_56 */ - "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */ - "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */ - "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */ - "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */ - "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */ - "GPIO-E", /* GPIO_62, LSEC pin 27 */ - "TP87", /* GPIO_63 */ - "[CODEC_RST_N]", /* GPIO_64 */ - "[PCM1_CLK]", /* GPIO_65 */ - "[PCM1_SYNC]", /* GPIO_66 */ - "[PCM1_DIN]", /* GPIO_67 */ - "[PCM1_DOUT]", /* GPIO_68 */ - "AUDIO_REF_CLK", /* GPIO_69 */ - "SLIMBUS_CLK", /* GPIO_70 */ - "SLIMBUS_DATA0", /* GPIO_71 */ - "SLIMBUS_DATA1", /* GPIO_72 */ - "NC", /* GPIO_73 */ - "NC", /* GPIO_74 */ - "NC", /* GPIO_75 */ - "NC", /* GPIO_76 */ - "TP94", /* GPIO_77 */ - "NC", /* GPIO_78 */ - "TP95", /* GPIO_79 */ - "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */ - "TP88", /* GPIO_81 */ - "TP89", /* GPIO_82 */ - "TP90", /* GPIO_83 */ - "TP91", /* GPIO_84 */ - "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */ - "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */ - "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */ - "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */ - "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */ - "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */ - "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */ - "NC", /* GPIO_92 */ - "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */ - "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */ - "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */ - "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */ - "NC", /* GPIO_97 */ - "CAM1_STANDBY_N", /* GPIO_98 */ - "NC", /* GPIO_99 */ - "NC", /* GPIO_100 */ - "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */ - "BOOT_CONFIG1", /* GPIO_102 */ - "USB_HUB_RESET", /* GPIO_103 */ - "CAM1_RST_N", /* GPIO_104 */ - "NC", /* GPIO_105 */ - "NC", /* GPIO_106 */ - "NC", /* GPIO_107 */ - "NC", /* GPIO_108 */ - "NC", /* GPIO_109 */ - "NC", /* GPIO_110 */ - "NC", /* GPIO_111 */ - "NC", /* GPIO_112 */ - "PMI8994_BUA", /* GPIO_113 */ - "PCIE2_RST_N", /* GPIO_114 */ - "PCIE2_CLKREQ_N", /* GPIO_115 */ - "PCIE2_WAKE", /* GPIO_116 */ - "SSC_IRQ_0", /* GPIO_117 */ - "SSC_IRQ_1", /* GPIO_118 */ - "SSC_IRQ_2", /* GPIO_119 */ - "NC", /* GPIO_120 */ - "GPIO121", /* GPIO_121, S HSEC pin 2 */ - "NC", /* GPIO_122 */ - "SSC_IRQ_6", /* GPIO_123 */ - "SSC_IRQ_7", /* GPIO_124 */ - "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */ - "BOOT_CONFIG5", /* GPIO_126 */ - "NC", /* GPIO_127 */ - "NC", /* GPIO_128 */ - "BOOT_CONFIG7", /* GPIO_129 */ - "PCIE1_RST_N", /* GPIO_130 */ - "PCIE1_CLKREQ_N", /* GPIO_131 */ - "PCIE1_WAKE", /* GPIO_132 */ - "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */ - "NC", /* GPIO_134 */ - "NC", /* GPIO_135 */ - "BOOT_CONFIG8", /* GPIO_136 */ - "NC", /* GPIO_137 */ - "NC", /* GPIO_138 */ - "GPS_SSBI2", /* GPIO_139 */ - "GPS_SSBI1", /* GPIO_140 */ - "NC", /* GPIO_141 */ - "NC", /* GPIO_142 */ - "NC", /* GPIO_143 */ - "BOOT_CONFIG6", /* GPIO_144 */ - "NC", /* GPIO_145 */ - "NC", /* GPIO_146 */ - "NC", /* GPIO_147 */ - "NC", /* GPIO_148 */ - "NC"; /* GPIO_149 */ - - sdc2_cd_on: sdc2_cd_on { - mux { - pins = "gpio38"; - function = "gpio"; - }; - - config { - pins = "gpio38"; - bias-pull-up; /* pull up */ - drive-strength = <16>; /* 16 MA */ - }; - }; - - sdc2_cd_off: sdc2_cd_off { - mux { - pins = "gpio38"; - function = "gpio"; - }; - - config { - pins = "gpio38"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 MA */ - }; - }; - - hdmi_hpd_active: hdmi_hpd_active { - mux { - pins = "gpio34"; - function = "hdmi_hot"; - }; - - config { - pins = "gpio34"; - bias-pull-down; - drive-strength = <16>; - }; - }; - - hdmi_hpd_suspend: hdmi_hpd_suspend { - mux { - pins = "gpio34"; - function = "hdmi_hot"; - }; - - config { - pins = "gpio34"; - bias-pull-down; - drive-strength = <2>; - }; - }; - - hdmi_ddc_active: hdmi_ddc_active { - mux { - pins = "gpio32", "gpio33"; - function = "hdmi_ddc"; - }; - - config { - pins = "gpio32", "gpio33"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - hdmi_ddc_suspend: hdmi_ddc_suspend { - mux { - pins = "gpio32", "gpio33"; - function = "hdmi_ddc"; - }; - - config { - pins = "gpio32", "gpio33"; - drive-strength = <2>; - bias-pull-down; - }; - }; -}; - -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; - vddpe-3v3-supply = <&wlan_en>; - vdda-supply = <&vreg_l28a_0p925>; -}; - -&pcie1 { - status = "okay"; - perst-gpio = <&tlmm 130 GPIO_ACTIVE_LOW>; - vdda-supply = <&vreg_l28a_0p925>; -}; - -&pcie2 { - status = "okay"; - perst-gpio = <&tlmm 114 GPIO_ACTIVE_LOW>; - vdda-supply = <&vreg_l28a_0p925>; -}; - -&pcie_phy { - status = "okay"; - - vdda-phy-supply = <&vreg_l28a_0p925>; - vdda-pll-supply = <&vreg_l12a_1p8>; -}; - -&pm8994_gpios { - gpio-line-names = - "NC", - "KEY_VOLP_N", - "NC", - "BL1_PWM", - "GPIO-F", /* BL0_PWM, LSEC pin 28 */ - "BL1_EN", - "NC", - "WLAN_EN", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "DIVCLK1", - "DIVCLK2", - "DIVCLK3", - "DIVCLK4", - "BT_EN", - "PMIC_SLB", - "PMIC_BUA", - "USB_VBUS_DET"; - - pinctrl-names = "default"; - pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>; - - ls_exp_gpio_f: pm8994_gpio5 { - pinconf { - pins = "gpio5"; - output-low; - power-source = <2>; // PM8994_GPIO_S4, 1.8V - }; - }; - - bt_en_gpios: bt_en_gpios { - pinconf { - pins = "gpio19"; - function = PMIC_GPIO_FUNC_NORMAL; - output-low; - power-source = <PM8994_GPIO_S4>; // 1.8V - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; - bias-pull-down; - }; - }; - - wlan_en_gpios: wlan_en_gpios { - pinconf { - pins = "gpio8"; - function = PMIC_GPIO_FUNC_NORMAL; - output-low; - power-source = <PM8994_GPIO_S4>; // 1.8V - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; - bias-pull-down; - }; - }; - - audio_mclk: clk_div1 { - pinconf { - pins = "gpio15"; - function = "func1"; - power-source = <PM8994_GPIO_S4>; // 1.8V - }; - }; - - volume_up_gpio: pm8996_gpio2 { - pinconf { - pins = "gpio2"; - function = "normal"; - input-enable; - drive-push-pull; - bias-pull-up; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V - }; - }; - - divclk4_pin_a: divclk4 { - pinconf { - pins = "gpio18"; - function = PMIC_GPIO_FUNC_FUNC2; - - bias-disable; - power-source = <PM8994_GPIO_S4>; - }; - }; - - usb3_vbus_det_gpio: pm8996_gpio22 { - pinconf { - pins = "gpio22"; - function = PMIC_GPIO_FUNC_NORMAL; - input-enable; - bias-pull-down; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V - }; - }; -}; - -&pm8994_mpps { - gpio-line-names = - "VDDPX_BIAS", - "WIFI_LED", - "NC", - "BT_LED", - "PM_MPP05", - "PM_MPP06", - "PM_MPP07", - "NC"; -}; - -&pm8994_spmi_regulators { - qcom,saw-reg = <&saw3>; - s9 { - qcom,saw-slave; - }; - s10 { - qcom,saw-slave; - }; - s11 { - qcom,saw-leader; - regulator-always-on; - regulator-min-microvolt = <980000>; - regulator-max-microvolt = <980000>; - }; -}; - -&pmi8994_gpios { - gpio-line-names = - "NC", - "SPKR_AMP_EN1", - "SPKR_AMP_EN2", - "TP61", - "NC", - "USB2_VBUS_DET", - "NC", - "NC", - "NC", - "NC"; - - usb2_vbus_det_gpio: pmi8996_gpio6 { - pinconf { - pins = "gpio6"; - function = PMIC_GPIO_FUNC_NORMAL; - input-enable; - bias-pull-down; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V - }; - }; -}; - -&pmi8994_spmi_regulators { - vdd_gfx: s2@1700 { - reg = <0x1700 0x100>; - regulator-name = "VDD_GFX"; - regulator-min-microvolt = <980000>; - regulator-max-microvolt = <980000>; - }; -}; - -&rpm_requests { - pm8994-regulators { - compatible = "qcom,rpm-pm8994-regulators"; - - vdd_s1-supply = <&vph_pwr>; - vdd_s2-supply = <&vph_pwr>; - vdd_s3-supply = <&vph_pwr>; - vdd_s4-supply = <&vph_pwr>; - vdd_s5-supply = <&vph_pwr>; - vdd_s6-supply = <&vph_pwr>; - vdd_s7-supply = <&vph_pwr>; - vdd_s8-supply = <&vph_pwr>; - vdd_s9-supply = <&vph_pwr>; - vdd_s10-supply = <&vph_pwr>; - vdd_s11-supply = <&vph_pwr>; - vdd_s12-supply = <&vph_pwr>; - vdd_l1-supply = <&vreg_s1b_1p025>; - vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; - vdd_l3_l11-supply = <&vreg_s3a_1p3>; - vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; - vdd_l5_l7-supply = <&vreg_s5a_2p15>; - vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; - vdd_l8_l16_l30-supply = <&vph_pwr>; - vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; - vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; - vdd_l14_l15-supply = <&vreg_s5a_2p15>; - vdd_l17_l29-supply = <&vph_pwr_bbyp>; - vdd_l20_l21-supply = <&vph_pwr_bbyp>; - vdd_l25-supply = <&vreg_s3a_1p3>; - vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; - - vreg_s3a_1p3: s3 { - regulator-name = "vreg_s3a_1p3"; - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - /** - * 1.8v required on LS expansion - * for mezzanine boards - */ - vreg_s4a_1p8: s4 { - regulator-name = "vreg_s4a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - vreg_s5a_2p15: s5 { - regulator-name = "vreg_s5a_2p15"; - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - }; - vreg_s7a_1p0: s7 { - regulator-name = "vreg_s7a_1p0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - }; - - vreg_l1a_1p0: l1 { - regulator-name = "vreg_l1a_1p0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - vreg_l2a_1p25: l2 { - regulator-name = "vreg_l2a_1p25"; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - }; - vreg_l3a_0p875: l3 { - regulator-name = "vreg_l3a_0p875"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - }; - vreg_l4a_1p225: l4 { - regulator-name = "vreg_l4a_1p225"; - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - vreg_l6a_1p2: l6 { - regulator-name = "vreg_l6a_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - vreg_l8a_1p8: l8 { - regulator-name = "vreg_l8a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l9a_1p8: l9 { - regulator-name = "vreg_l9a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l10a_1p8: l10 { - regulator-name = "vreg_l10a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l11a_1p15: l11 { - regulator-name = "vreg_l11a_1p15"; - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - }; - vreg_l12a_1p8: l12 { - regulator-name = "vreg_l12a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l13a_2p95: l13 { - regulator-name = "vreg_l13a_2p95"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - vreg_l14a_1p8: l14 { - regulator-name = "vreg_l14a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l15a_1p8: l15 { - regulator-name = "vreg_l15a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l16a_2p7: l16 { - regulator-name = "vreg_l16a_2p7"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - vreg_l17a_2p8: l17 { - regulator-name = "vreg_l17a_2p8"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; - vreg_l18a_2p85: l18 { - regulator-name = "vreg_l18a_2p85"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2900000>; - }; - vreg_l19a_2p8: l19 { - regulator-name = "vreg_l19a_2p8"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - vreg_l20a_2p95: l20 { - regulator-name = "vreg_l20a_2p95"; - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - }; - vreg_l21a_2p95: l21 { - regulator-name = "vreg_l21a_2p95"; - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - vreg_l22a_3p0: l22 { - regulator-name = "vreg_l22a_3p0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - vreg_l23a_2p8: l23 { - regulator-name = "vreg_l23a_2p8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - vreg_l24a_3p075: l24 { - regulator-name = "vreg_l24a_3p075"; - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - vreg_l25a_1p2: l25 { - regulator-name = "vreg_l25a_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-allow-set-load; - }; - vreg_l26a_0p8: l27 { - regulator-name = "vreg_l26a_0p8"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - vreg_l28a_0p925: l28 { - regulator-name = "vreg_l28a_0p925"; - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <925000>; - regulator-allow-set-load; - }; - vreg_l29a_2p8: l29 { - regulator-name = "vreg_l29a_2p8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - vreg_l30a_1p8: l30 { - regulator-name = "vreg_l30a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l32a_1p8: l32 { - regulator-name = "vreg_l32a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vreg_lvs1a_1p8: lvs1 { - regulator-name = "vreg_lvs1a_1p8"; - }; - - vreg_lvs2a_1p8: lvs2 { - regulator-name = "vreg_lvs2a_1p8"; - }; - }; - - pmi8994-regulators { - compatible = "qcom,rpm-pmi8994-regulators"; - - vdd_s1-supply = <&vph_pwr>; - vdd_s2-supply = <&vph_pwr>; - vdd_s3-supply = <&vph_pwr>; - vdd_bst_byp-supply = <&vph_pwr>; - - vph_pwr_bbyp: boost-bypass { - regulator-name = "vph_pwr_bbyp"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vreg_s1b_1p025: s1 { - regulator-name = "vreg_s1b_1p025"; - regulator-min-microvolt = <1025000>; - regulator-max-microvolt = <1025000>; - }; - }; -}; - -&sdhc2 { - /* External SD card */ - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>; - cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vreg_l21a_2p95>; - vqmmc-supply = <&vreg_l13a_2p95>; - status = "okay"; -}; - -&q6asmdai { - dai@0 { - reg = <0>; - }; - - dai@1 { - reg = <1>; - }; - - dai@2 { - reg = <2>; - }; -}; - -&sound { - compatible = "qcom,apq8096-sndcard"; - model = "DB820c"; - audio-routing = "RX_BIAS", "MCLK", - "MM_DL1", "MultiMedia1 Playback", - "MM_DL2", "MultiMedia2 Playback", - "MultiMedia3 Capture", "MM_UL3"; - - mm1-dai-link { - link-name = "MultiMedia1"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; - }; - }; - - mm2-dai-link { - link-name = "MultiMedia2"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; - }; - }; - - mm3-dai-link { - link-name = "MultiMedia3"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; - }; - }; - - hdmi-dai-link { - link-name = "HDMI"; - cpu { - sound-dai = <&q6afedai HDMI_RX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - - codec { - sound-dai = <&hdmi 0>; - }; - }; - - slim-dai-link { - link-name = "SLIM Playback"; - cpu { - sound-dai = <&q6afedai SLIMBUS_6_RX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - - codec { - sound-dai = <&wcd9335 6>; - }; - }; - - slimcap-dai-link { - link-name = "SLIM Capture"; - cpu { - sound-dai = <&q6afedai SLIMBUS_0_TX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - - codec { - sound-dai = <&wcd9335 1>; - }; - }; -}; - -&ufsphy { - status = "okay"; - - vdda-phy-supply = <&vreg_l28a_0p925>; - vdda-pll-supply = <&vreg_l12a_1p8>; - vddp-ref-clk-supply = <&vreg_l25a_1p2>; -}; - -&ufshc { - status = "okay"; - - vcc-supply = <&vreg_l20a_2p95>; - vccq-supply = <&vreg_l25a_1p2>; - vccq2-supply = <&vreg_s4a_1p8>; - - vcc-max-microamp = <600000>; - vccq-max-microamp = <450000>; - vccq2-max-microamp = <450000>; -}; - -&usb2 { - status = "okay"; - extcon = <&usb2_id>; - - dwc3@7600000 { - extcon = <&usb2_id>; - dr_mode = "otg"; - maximum-speed = "high-speed"; - }; -}; - -&usb3 { - status = "okay"; - extcon = <&usb3_id>; - - dwc3@6a00000 { - extcon = <&usb3_id>; - dr_mode = "otg"; - }; -}; - -&usb3phy { - status = "okay"; - - vdda-phy-supply = <&vreg_l28a_0p925>; - vdda-pll-supply = <&vreg_l12a_1p8>; - -}; - -&venus { - status = "okay"; -}; - -&wcd9335 { - clock-names = "mclk", "slimbus"; - clocks = <&div1_mclk>, - <&rpmcc RPM_SMD_BB_CLK1>; - - vdd-buck-supply = <&vreg_s4a_1p8>; - vdd-buck-sido-supply = <&vreg_s4a_1p8>; - vdd-tx-supply = <&vreg_s4a_1p8>; - vdd-rx-supply = <&vreg_s4a_1p8>; - vdd-io-supply = <&vreg_s4a_1p8>; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts index d66c15538785..7c0ceb3cff45 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts @@ -5,9 +5,22 @@ /dts-v1/; -#include "msm8916-mtp.dtsi" +#include "msm8916-pm8916.dtsi" / { model = "Qualcomm Technologies, Inc. MSM 8916 MTP"; compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp/1", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + usid0 = &pm8916_0; + }; + + chosen { + stdout-path = "serial0"; + }; +}; + +&blsp1_uart2 { + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi deleted file mode 100644 index 1bd05046cdeb..000000000000 --- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi +++ /dev/null @@ -1,21 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. - */ - -#include "msm8916-pm8916.dtsi" - -/ { - aliases { - serial0 = &blsp1_uart2; - usid0 = &pm8916_0; - }; - - chosen { - stdout-path = "serial0"; - }; -}; - -&blsp1_uart2 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts index 45ed594c1b9c..7d9fc35bc7a0 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts @@ -5,9 +5,31 @@ /dts-v1/; -#include "msm8996-mtp.dtsi" +#include "msm8996.dtsi" / { model = "Qualcomm Technologies, Inc. MSM 8996 MTP"; compatible = "qcom,msm8996-mtp"; + + aliases { + serial0 = &blsp2_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + soc { + serial@75b0000 { + status = "okay"; + }; + }; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_phy { + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi deleted file mode 100644 index ac43a91f1104..000000000000 --- a/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi +++ /dev/null @@ -1,30 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. - */ - -#include "msm8996.dtsi" - -/ { - aliases { - serial0 = &blsp2_uart2; - }; - - chosen { - stdout-path = "serial0"; - }; - - soc { - serial@75b0000 { - status = "okay"; - }; - }; -}; - -&hdmi { - status = "okay"; -}; - -&hdmi_phy { - status = "okay"; -}; |