23 files changed, 28 insertions, 28 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e24a9820e12f..d64ad0fe6c0c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -986,7 +986,7 @@ config SMP
 	  uniprocessor machines. On a uniprocessor machine, the kernel
 	  will run faster if you say N here.
 
-	  See also <file:Documentation/x86/i386/IO-APIC.rst>,
+	  See also <file:Documentation/arch/x86/i386/IO-APIC.rst>,
 	  <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO available at
 	  <http://tldp.org/HOWTO/SMP-HOWTO.html>.
 
diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c
index 21dfa4aa35bb..033f5aead88a 100644
--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@@ -853,7 +853,7 @@ valid_phys_addr_range (phys_addr_t phys_addr, unsigned long size)
 	 * /dev/mem reads and writes use copy_to_user(), which implicitly
 	 * uses a granule-sized kernel identity mapping.  It's really
 	 * only safe to do this for regions in kern_memmap.  For more
-	 * details, see Documentation/ia64/aliasing.rst.
+	 * details, see Documentation/arch/ia64/aliasing.rst.
 	 */
 	attr = kern_mem_attribute(phys_addr, size);
 	if (attr & EFI_MEMORY_WB || attr & EFI_MEMORY_UC)
diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S
index 2094f3249019..cc4733e9990a 100644
--- a/arch/ia64/kernel/fsys.S
+++ b/arch/ia64/kernel/fsys.S
@@ -28,7 +28,7 @@
 #include <asm/native/inst.h>
 
 /*
- * See Documentation/ia64/fsys.rst for details on fsyscalls.
+ * See Documentation/arch/ia64/fsys.rst for details on fsyscalls.
  *
  * On entry to an fsyscall handler:
  *   r10	= 0 (i.e., defaults to "successful syscall return")
diff --git a/arch/ia64/mm/ioremap.c b/arch/ia64/mm/ioremap.c
index 55fd3eb753ff..92b81bc91397 100644
--- a/arch/ia64/mm/ioremap.c
+++ b/arch/ia64/mm/ioremap.c
@@ -43,7 +43,7 @@ ioremap (unsigned long phys_addr, unsigned long size)
 	/*
 	 * For things in kern_memmap, we must use the same attribute
 	 * as the rest of the kernel.  For more details, see
-	 * Documentation/ia64/aliasing.rst.
+	 * Documentation/arch/ia64/aliasing.rst.
 	 */
 	attr = kern_mem_attribute(phys_addr, size);
 	if (attr & EFI_MEMORY_WB)
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 211757e34198..0a0328e61bef 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -448,7 +448,7 @@ pci_mmap_legacy_page_range(struct pci_bus *bus, struct vm_area_struct *vma,
 		return -ENOSYS;
 
 	/*
-	 * Avoid attribute aliasing.  See Documentation/ia64/aliasing.rst
+	 * Avoid attribute aliasing.  See Documentation/arch/ia64/aliasing.rst
 	 * for more details.
 	 */
 	if (!valid_mmap_phys_addr_range(vma->vm_pgoff, size))
diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
index e2f961208f18..28eebabfd34b 100644
--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@@ -11,7 +11,7 @@ config AMIGA
 	help
 	  This option enables support for the Amiga series of computers. If
 	  you plan to use this kernel on an Amiga, say Y here and browse the
-	  material available in <file:Documentation/m68k>; otherwise say N.
+	  material available in <file:Documentation/arch/m68k>; otherwise say N.
 
 config ATARI
 	bool "Atari support"
@@ -23,7 +23,7 @@ config ATARI
 	  This option enables support for the 68000-based Atari series of
 	  computers (including the TT, Falcon and Medusa). If you plan to use
 	  this kernel on an Atari, say Y here and browse the material
-	  available in <file:Documentation/m68k>; otherwise say N.
+	  available in <file:Documentation/arch/m68k>; otherwise say N.
 
 config ATARI_KBD_CORE
 	bool
diff --git a/arch/sh/Kconfig.cpu b/arch/sh/Kconfig.cpu
index fff419f3d757..336c54369636 100644
--- a/arch/sh/Kconfig.cpu
+++ b/arch/sh/Kconfig.cpu
@@ -85,7 +85,7 @@ config CPU_HAS_SR_RB
 	  that are lacking this bit must have another method in place for
 	  accomplishing what is taken care of by the banked registers.
 
-	  See <file:Documentation/sh/register-banks.rst> for further
+	  See <file:Documentation/arch/sh/register-banks.rst> for further
 	  information on SR.RB and register banking in the kernel in general.
 
 config CPU_HAS_PTEAEX
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 947e24714c28..57a14206ad8f 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -433,7 +433,7 @@ config SMP
 	  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
 	  Management" code will be disabled if you say Y here.
 
-	  See also <file:Documentation/x86/i386/IO-APIC.rst>,
+	  See also <file:Documentation/arch/x86/i386/IO-APIC.rst>,
 	  <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO available at
 	  <http://www.tldp.org/docs.html#howto>.
 
@@ -1323,7 +1323,7 @@ config MICROCODE
 	  the Linux kernel.
 
 	  The preferred method to load microcode from a detached initrd is described
-	  in Documentation/x86/microcode.rst. For that you need to enable
+	  in Documentation/arch/x86/microcode.rst. For that you need to enable
 	  CONFIG_BLK_DEV_INITRD in order for the loader to be able to scan the
 	  initrd for microcode blobs.
 
@@ -1509,7 +1509,7 @@ config X86_5LEVEL
 	  A kernel with the option enabled can be booted on machines that
 	  support 4- or 5-level paging.
 
-	  See Documentation/x86/x86_64/5level-paging.rst for more
+	  See Documentation/arch/x86/x86_64/5level-paging.rst for more
 	  information.
 
 	  Say N if unsure.
@@ -1773,7 +1773,7 @@ config MTRR
 	  You can safely say Y even if your machine doesn't have MTRRs, you'll
 	  just add about 9 KB to your kernel.
 
-	  See <file:Documentation/x86/mtrr.rst> for more information.
+	  See <file:Documentation/arch/x86/mtrr.rst> for more information.
 
 config MTRR_SANITIZER
 	def_bool y
@@ -2549,7 +2549,7 @@ config PAGE_TABLE_ISOLATION
 	  ensuring that the majority of kernel addresses are not mapped
 	  into userspace.
 
-	  See Documentation/x86/pti.rst for more details.
+	  See Documentation/arch/x86/pti.rst for more details.
 
 config RETPOLINE
 	bool "Avoid speculative indirect branches in kernel"
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index bdfe08f1a930..c5d614d28a75 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -97,7 +97,7 @@ config IOMMU_DEBUG
 	  code. When you use it make sure you have a big enough
 	  IOMMU/AGP aperture.  Most of the options enabled by this can
 	  be set more finegrained using the iommu= command line
-	  options. See Documentation/x86/x86_64/boot-options.rst for more
+	  options. See Documentation/arch/x86/x86_64/boot-options.rst for more
 	  details.
 
 config IOMMU_LEAK
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index 9338c68e7413..b04ca8e2b213 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -321,7 +321,7 @@ start_sys_seg:	.word	SYSSEG		# obsolete and meaningless, but just
 
 type_of_loader:	.byte	0		# 0 means ancient bootloader, newer
 					# bootloaders know to change this.
-					# See Documentation/x86/boot.rst for
+					# See Documentation/arch/x86/boot.rst for
 					# assigned ids
 
 # flags, unused bits must be zero (RFU) bit within loadflags
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index eccc3431e515..d94d361f506f 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -8,7 +8,7 @@
  *
  * entry.S contains the system-call and fault low-level handling routines.
  *
- * Some of this is documented in Documentation/x86/entry_64.rst
+ * Some of this is documented in Documentation/arch/x86/entry_64.rst
  *
  * A note on terminology:
  * - iret frame:	Architecture defined interrupt frame from SS to RIP
diff --git a/arch/x86/include/asm/bootparam_utils.h b/arch/x86/include/asm/bootparam_utils.h
index 53e9b0620d96..d90ae472fb76 100644
--- a/arch/x86/include/asm/bootparam_utils.h
+++ b/arch/x86/include/asm/bootparam_utils.h
@@ -38,7 +38,7 @@ static void sanitize_boot_params(struct boot_params *boot_params)
 	 * IMPORTANT NOTE TO BOOTLOADER AUTHORS: do not simply clear
 	 * this field.  The purpose of this field is to guarantee
 	 * compliance with the x86 boot spec located in
-	 * Documentation/x86/boot.rst .  That spec says that the
+	 * Documentation/arch/x86/boot.rst .  That spec says that the
 	 * *whole* structure should be cleared, after which only the
 	 * portion defined by struct setup_header (boot_params->hdr)
 	 * should be copied in.
diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h
index e9e2c3ba5923..06ef25411d62 100644
--- a/arch/x86/include/asm/page_64_types.h
+++ b/arch/x86/include/asm/page_64_types.h
@@ -49,7 +49,7 @@
 
 #define __START_KERNEL_map	_AC(0xffffffff80000000, UL)
 
-/* See Documentation/x86/x86_64/mm.rst for a description of the memory map. */
+/* See Documentation/arch/x86/x86_64/mm.rst for a description of the memory map. */
 
 #define __PHYSICAL_MASK_SHIFT	52
 
diff --git a/arch/x86/include/asm/pgtable_64_types.h b/arch/x86/include/asm/pgtable_64_types.h
index 38bf837e3554..38b54b992f32 100644
--- a/arch/x86/include/asm/pgtable_64_types.h
+++ b/arch/x86/include/asm/pgtable_64_types.h
@@ -104,7 +104,7 @@ extern unsigned int ptrs_per_p4d;
 #define PGDIR_MASK	(~(PGDIR_SIZE - 1))
 
 /*
- * See Documentation/x86/x86_64/mm.rst for a description of the memory map.
+ * See Documentation/arch/x86/x86_64/mm.rst for a description of the memory map.
  *
  * Be very careful vs. KASLR when changing anything here. The KASLR address
  * range must not overlap with anything except the KASAN shadow area, which
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 9eb457b10341..f5fdeb1e3606 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -61,7 +61,7 @@ static u8 amd_ucode_patch[MAX_NUMNODES][PATCH_MAX_SIZE];
 
 /*
  * Microcode patch container file is prepended to the initrd in cpio
- * format. See Documentation/x86/microcode.rst
+ * format. See Documentation/arch/x86/microcode.rst
  */
 static const char
 ucode_path[] __maybe_unused = "kernel/x86/microcode/AuthenticAMD.bin";
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index 7fe51488e136..0e7b6afe2fa6 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -76,7 +76,7 @@ unsigned int resctrl_rmid_realloc_limit;
 #define CF(cf)	((unsigned long)(1048576 * (cf) + 0.5))
 
 /*
- * The correction factor table is documented in Documentation/x86/resctrl.rst.
+ * The correction factor table is documented in Documentation/arch/x86/resctrl.rst.
  * If rmid > rmid threshold, MBM total and local values should be multiplied
  * by the correction factor.
  *
diff --git a/arch/x86/kernel/cpu/sgx/sgx.h b/arch/x86/kernel/cpu/sgx/sgx.h
index 0f2020653fba..d2dad21259a8 100644
--- a/arch/x86/kernel/cpu/sgx/sgx.h
+++ b/arch/x86/kernel/cpu/sgx/sgx.h
@@ -15,7 +15,7 @@
 
 #define EREMOVE_ERROR_MESSAGE \
 	"EREMOVE returned %d (0x%x) and an EPC page was leaked. SGX may become unusable. " \
-	"Refer to Documentation/x86/sgx.rst for more information."
+	"Refer to Documentation/arch/x86/sgx.rst for more information."
 
 #define SGX_MAX_EPC_SECTIONS		8
 #define SGX_EEXTEND_BLOCK_SIZE		256
diff --git a/arch/x86/kernel/kexec-bzimage64.c b/arch/x86/kernel/kexec-bzimage64.c
index 6b58610a1552..a61c12c01270 100644
--- a/arch/x86/kernel/kexec-bzimage64.c
+++ b/arch/x86/kernel/kexec-bzimage64.c
@@ -476,7 +476,7 @@ static void *bzImage64_load(struct kimage *image, char *kernel,
 	efi_map_offset = params_cmdline_sz;
 	efi_setup_data_offset = efi_map_offset + ALIGN(efi_map_sz, 16);
 
-	/* Copy setup header onto bootparams. Documentation/x86/boot.rst */
+	/* Copy setup header onto bootparams. Documentation/arch/x86/boot.rst */
 	setup_header_size = 0x0202 + kernel[0x0201] - setup_hdr_offset;
 
 	/* Is there a limit on setup header size? */
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 30bbe4abb5d6..de6be0a3965e 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -124,7 +124,7 @@ void __init pci_iommu_alloc(void)
 }
 
 /*
- * See <Documentation/x86/x86_64/boot-options.rst> for the iommu kernel
+ * See <Documentation/arch/x86/x86_64/boot-options.rst> for the iommu kernel
  * parameter documentation.
  */
 static __init int iommu_setup(char *p)
diff --git a/arch/x86/mm/pat/set_memory.c b/arch/x86/mm/pat/set_memory.c
index 356758b7d4b4..f0099ee70e02 100644
--- a/arch/x86/mm/pat/set_memory.c
+++ b/arch/x86/mm/pat/set_memory.c
@@ -234,7 +234,7 @@ within_inclusive(unsigned long addr, unsigned long start, unsigned long end)
  * take full advantage of the the limited (s32) immediate addressing range (2G)
  * of x86_64.
  *
- * See Documentation/x86/x86_64/mm.rst for more detail.
+ * See Documentation/arch/x86/x86_64/mm.rst for more detail.
  */
 
 static inline unsigned long highmap_start_pfn(void)
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 92d73ccede70..16c5292d227d 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -925,7 +925,7 @@ void flush_tlb_multi(const struct cpumask *cpumask,
 }
 
 /*
- * See Documentation/x86/tlb.rst for details.  We choose 33
+ * See Documentation/arch/x86/tlb.rst for details.  We choose 33
  * because it is large enough to cover the vast majority (at
  * least 95%) of allocations, and is small enough that we are
  * confident it will not cause too much overhead.  Each single
diff --git a/arch/x86/platform/pvh/enlighten.c b/arch/x86/platform/pvh/enlighten.c
index ed0442e35434..00a92cb2c814 100644
--- a/arch/x86/platform/pvh/enlighten.c
+++ b/arch/x86/platform/pvh/enlighten.c
@@ -86,7 +86,7 @@ static void __init init_pvh_bootparams(bool xen_guest)
 	}
 
 	/*
-	 * See Documentation/x86/boot.rst.
+	 * See Documentation/arch/x86/boot.rst.
 	 *
 	 * Version 2.12 supports Xen entry point but we will use default x86/PC
 	 * environment (i.e. hardware_subarch 0).
diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h
index 9793b49fc641..574795a20d6f 100644
--- a/arch/xtensa/include/asm/initialize_mmu.h
+++ b/arch/xtensa/include/asm/initialize_mmu.h
@@ -43,7 +43,7 @@
 #if XCHAL_HAVE_S32C1I && (XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RC_2009_0)
 /*
  * We Have Atomic Operation Control (ATOMCTL) Register; Initialize it.
- * For details see Documentation/xtensa/atomctl.rst
+ * For details see Documentation/arch/xtensa/atomctl.rst
  */
 #if XCHAL_DCACHE_IS_COHERENT
 	movi	a3, 0x25	/* For SMP/MX -- internal for writeback,