diff options
Diffstat (limited to 'drivers/acpi/acpica/exfldio.c')
| -rw-r--r-- | drivers/acpi/acpica/exfldio.c | 163 |
1 files changed, 59 insertions, 104 deletions
diff --git a/drivers/acpi/acpica/exfldio.c b/drivers/acpi/acpica/exfldio.c index 7e0afe72487e..0771934c0455 100644 --- a/drivers/acpi/acpica/exfldio.c +++ b/drivers/acpi/acpica/exfldio.c @@ -1,46 +1,12 @@ +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 /****************************************************************************** * * Module Name: exfldio - Aml Field I/O * + * Copyright (C) 2000 - 2025, Intel Corp. + * *****************************************************************************/ -/* - * Copyright (C) 2000 - 2013, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - #include <acpi/acpi.h> #include "accommon.h" #include "acinterp.h" @@ -123,12 +89,6 @@ acpi_ex_setup_region(union acpi_operand_object *obj_desc, } } - /* Exit if Address/Length have been disallowed by the host OS */ - - if (rgn_desc->common.flags & AOPOBJ_INVALID) { - return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS); - } - /* * Exit now for SMBus, GSBus or IPMI address space, it has a non-linear * address space and the request cannot be directly validated @@ -144,7 +104,7 @@ acpi_ex_setup_region(union acpi_operand_object *obj_desc, #ifdef ACPI_UNDER_DEVELOPMENT /* * If the Field access is any_acc, we can now compute the optimal - * access (because we know know the length of the parent region) + * access (because we know the length of the parent region) */ if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) { if (ACPI_FAILURE(status)) { @@ -170,7 +130,7 @@ acpi_ex_setup_region(union acpi_operand_object *obj_desc, if (ACPI_ROUND_UP(rgn_desc->region.length, obj_desc->common_field. access_byte_width) >= - ((acpi_size) obj_desc->common_field. + ((acpi_size)obj_desc->common_field. base_byte_offset + obj_desc->common_field.access_byte_width + field_datum_byte_offset)) { @@ -186,7 +146,8 @@ acpi_ex_setup_region(union acpi_operand_object *obj_desc, * byte, and a field with Dword access specified. */ ACPI_ERROR((AE_INFO, - "Field [%4.4s] access width (%u bytes) too large for region [%4.4s] (length %u)", + "Field [%4.4s] access width (%u bytes) " + "too large for region [%4.4s] (length %u)", acpi_ut_get_node_name(obj_desc-> common_field.node), obj_desc->common_field.access_byte_width, @@ -200,7 +161,8 @@ acpi_ex_setup_region(union acpi_operand_object *obj_desc, * exceeds region length, indicate an error */ ACPI_ERROR((AE_INFO, - "Field [%4.4s] Base+Offset+Width %u+%u+%u is beyond end of region [%4.4s] (length %u)", + "Field [%4.4s] Base+Offset+Width %u+%u+%u " + "is beyond end of region [%4.4s] (length %u)", acpi_ut_get_node_name(obj_desc->common_field.node), obj_desc->common_field.base_byte_offset, field_datum_byte_offset, @@ -269,17 +231,15 @@ acpi_ex_access_region(union acpi_operand_object *obj_desc, } ACPI_DEBUG_PRINT_RAW((ACPI_DB_BFIELD, - " Region [%s:%X], Width %X, ByteBase %X, Offset %X at %p\n", + " Region [%s:%X], Width %X, ByteBase %X, Offset %X at %8.8X%8.8X\n", acpi_ut_get_region_name(rgn_desc->region. space_id), rgn_desc->region.space_id, obj_desc->common_field.access_byte_width, obj_desc->common_field.base_byte_offset, - field_datum_byte_offset, ACPI_CAST_PTR(void, - (rgn_desc-> - region. - address + - region_offset)))); + field_datum_byte_offset, + ACPI_FORMAT_UINT64(rgn_desc->region.address + + region_offset))); /* Invoke the appropriate address_space/op_region handler */ @@ -424,22 +384,22 @@ acpi_ex_field_datum_io(union acpi_operand_object *obj_desc, * Copy the data from the source buffer. * Length is the field width in bytes. */ - ACPI_MEMCPY(value, - (obj_desc->buffer_field.buffer_obj)->buffer. - pointer + - obj_desc->buffer_field.base_byte_offset + - field_datum_byte_offset, - obj_desc->common_field.access_byte_width); + memcpy(value, + (obj_desc->buffer_field.buffer_obj)->buffer. + pointer + + obj_desc->buffer_field.base_byte_offset + + field_datum_byte_offset, + obj_desc->common_field.access_byte_width); } else { /* * Copy the data to the target buffer. * Length is the field width in bytes. */ - ACPI_MEMCPY((obj_desc->buffer_field.buffer_obj)->buffer. - pointer + - obj_desc->buffer_field.base_byte_offset + - field_datum_byte_offset, value, - obj_desc->common_field.access_byte_width); + memcpy((obj_desc->buffer_field.buffer_obj)->buffer. + pointer + + obj_desc->buffer_field.base_byte_offset + + field_datum_byte_offset, value, + obj_desc->common_field.access_byte_width); } status = AE_OK; @@ -474,7 +434,7 @@ acpi_ex_field_datum_io(union acpi_operand_object *obj_desc, * region_field case and write the datum to the Operation Region */ - /*lint -fallthrough */ + ACPI_FALLTHROUGH; case ACPI_TYPE_LOCAL_REGION_FIELD: /* @@ -646,15 +606,15 @@ acpi_ex_write_with_update_rule(union acpi_operand_object *obj_desc, ACPI_ERROR((AE_INFO, "Unknown UpdateRule value: 0x%X", - (obj_desc->common_field. - field_flags & + (obj_desc->common_field.field_flags & AML_FIELD_UPDATE_RULE_MASK))); return_ACPI_STATUS(AE_AML_OPERAND_VALUE); } } ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, - "Mask %8.8X%8.8X, DatumOffset %X, Width %X, Value %8.8X%8.8X, MergedValue %8.8X%8.8X\n", + "Mask %8.8X%8.8X, DatumOffset %X, Width %X, " + "Value %8.8X%8.8X, MergedValue %8.8X%8.8X\n", ACPI_FORMAT_UINT64(mask), field_datum_byte_offset, obj_desc->common_field.access_byte_width, @@ -663,8 +623,9 @@ acpi_ex_write_with_update_rule(union acpi_operand_object *obj_desc, /* Write the merged value */ - status = acpi_ex_field_datum_io(obj_desc, field_datum_byte_offset, - &merged_value, ACPI_WRITE); + status = + acpi_ex_field_datum_io(obj_desc, field_datum_byte_offset, + &merged_value, ACPI_WRITE); return_ACPI_STATUS(status); } @@ -711,7 +672,7 @@ acpi_ex_extract_from_field(union acpi_operand_object *obj_desc, return_ACPI_STATUS(AE_BUFFER_OVERFLOW); } - ACPI_MEMSET(buffer, 0, buffer_length); + memset(buffer, 0, buffer_length); access_bit_width = ACPI_MUL_8(obj_desc->common_field.access_byte_width); /* Handle the simple case here */ @@ -728,7 +689,7 @@ acpi_ex_extract_from_field(union acpi_operand_object *obj_desc, status = acpi_ex_field_datum_io(obj_desc, 0, &raw_datum, ACPI_READ); - ACPI_MEMCPY(buffer, &raw_datum, buffer_length); + memcpy(buffer, &raw_datum, buffer_length); } return_ACPI_STATUS(status); @@ -772,8 +733,9 @@ acpi_ex_extract_from_field(union acpi_operand_object *obj_desc, /* Get next input datum from the field */ field_offset += obj_desc->common_field.access_byte_width; - status = acpi_ex_field_datum_io(obj_desc, field_offset, - &raw_datum, ACPI_READ); + status = + acpi_ex_field_datum_io(obj_desc, field_offset, &raw_datum, + ACPI_READ); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } @@ -801,9 +763,9 @@ acpi_ex_extract_from_field(union acpi_operand_object *obj_desc, /* Write merged datum to target buffer */ - ACPI_MEMCPY(((char *)buffer) + buffer_offset, &merged_datum, - ACPI_MIN(obj_desc->common_field.access_byte_width, - buffer_length - buffer_offset)); + memcpy(((char *)buffer) + buffer_offset, &merged_datum, + ACPI_MIN(obj_desc->common_field.access_byte_width, + buffer_length - buffer_offset)); buffer_offset += obj_desc->common_field.access_byte_width; merged_datum = @@ -819,9 +781,9 @@ acpi_ex_extract_from_field(union acpi_operand_object *obj_desc, /* Write the last datum to the buffer */ - ACPI_MEMCPY(((char *)buffer) + buffer_offset, &merged_datum, - ACPI_MIN(obj_desc->common_field.access_byte_width, - buffer_length - buffer_offset)); + memcpy(((char *)buffer) + buffer_offset, &merged_datum, + ACPI_MIN(obj_desc->common_field.access_byte_width, + buffer_length - buffer_offset)); return_ACPI_STATUS(AE_OK); } @@ -866,6 +828,7 @@ acpi_ex_insert_into_field(union acpi_operand_object *obj_desc, new_buffer = NULL; required_length = ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->common_field.bit_length); + /* * We must have a buffer that is at least as long as the field * we are writing to. This is because individual fields are @@ -886,7 +849,7 @@ acpi_ex_insert_into_field(union acpi_operand_object *obj_desc, * at Byte zero. All unused (upper) bytes of the * buffer will be 0. */ - ACPI_MEMCPY((char *)new_buffer, (char *)buffer, buffer_length); + memcpy((char *)new_buffer, (char *)buffer, buffer_length); buffer = new_buffer; buffer_length = required_length; } @@ -900,17 +863,9 @@ acpi_ex_insert_into_field(union acpi_operand_object *obj_desc, access_bit_width = ACPI_MUL_8(obj_desc->common_field.access_byte_width); - /* - * Create the bitmasks used for bit insertion. - * Note: This if/else is used to bypass compiler differences with the - * shift operator - */ - if (access_bit_width == ACPI_INTEGER_BIT_SIZE) { - width_mask = ACPI_UINT64_MAX; - } else { - width_mask = ACPI_MASK_BITS_ABOVE(access_bit_width); - } + /* Create the bitmasks used for bit insertion */ + width_mask = ACPI_MASK_BITS_ABOVE_64(access_bit_width); mask = width_mask & ACPI_MASK_BITS_BELOW(obj_desc->common_field.start_field_bit_offset); @@ -926,9 +881,9 @@ acpi_ex_insert_into_field(union acpi_operand_object *obj_desc, /* Get initial Datum from the input buffer */ - ACPI_MEMCPY(&raw_datum, buffer, - ACPI_MIN(obj_desc->common_field.access_byte_width, - buffer_length - buffer_offset)); + memcpy(&raw_datum, buffer, + ACPI_MIN(obj_desc->common_field.access_byte_width, + buffer_length - buffer_offset)); merged_datum = raw_datum << obj_desc->common_field.start_field_bit_offset; @@ -940,9 +895,9 @@ acpi_ex_insert_into_field(union acpi_operand_object *obj_desc, /* Write merged datum to the target field */ merged_datum &= mask; - status = acpi_ex_write_with_update_rule(obj_desc, mask, - merged_datum, - field_offset); + status = + acpi_ex_write_with_update_rule(obj_desc, mask, merged_datum, + field_offset); if (ACPI_FAILURE(status)) { goto exit; } @@ -978,9 +933,9 @@ acpi_ex_insert_into_field(union acpi_operand_object *obj_desc, /* Get the next input datum from the buffer */ buffer_offset += obj_desc->common_field.access_byte_width; - ACPI_MEMCPY(&raw_datum, ((char *)buffer) + buffer_offset, - ACPI_MIN(obj_desc->common_field.access_byte_width, - buffer_length - buffer_offset)); + memcpy(&raw_datum, ((char *)buffer) + buffer_offset, + ACPI_MIN(obj_desc->common_field.access_byte_width, + buffer_length - buffer_offset)); merged_datum |= raw_datum << obj_desc->common_field.start_field_bit_offset; @@ -998,11 +953,11 @@ acpi_ex_insert_into_field(union acpi_operand_object *obj_desc, /* Write the last datum to the field */ merged_datum &= mask; - status = acpi_ex_write_with_update_rule(obj_desc, - mask, merged_datum, - field_offset); + status = + acpi_ex_write_with_update_rule(obj_desc, mask, merged_datum, + field_offset); - exit: +exit: /* Free temporary buffer if we used one */ if (new_buffer) { |