1 files changed, 459 insertions, 232 deletions

diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index f3e7396e3191..b2817a2995d6 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -11,17 +11,19 @@
 #include <linux/module.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
 #include <linux/libata.h>
+#include <linux/unaligned.h>
 
 #include "libata.h"
 #include "libata-transport.h"
 
 /* debounce timing parameters in msecs { interval, duration, timeout } */
-const unsigned long sata_deb_timing_normal[]		= {   5,  100, 2000 };
+const unsigned int sata_deb_timing_normal[]		= {   5,  100, 2000 };
 EXPORT_SYMBOL_GPL(sata_deb_timing_normal);
-const unsigned long sata_deb_timing_hotplug[]		= {  25,  500, 2000 };
+const unsigned int sata_deb_timing_hotplug[]		= {  25,  500, 2000 };
 EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug);
-const unsigned long sata_deb_timing_long[]		= { 100, 2000, 5000 };
+const unsigned int sata_deb_timing_long[]		= { 100, 2000, 5000 };
 EXPORT_SYMBOL_GPL(sata_deb_timing_long);
 
 /**
@@ -230,11 +232,11 @@ EXPORT_SYMBOL_GPL(ata_tf_from_fis);
  *	RETURNS:
  *	0 on success, -errno on failure.
  */
-int sata_link_debounce(struct ata_link *link, const unsigned long *params,
+int sata_link_debounce(struct ata_link *link, const unsigned int *params,
 		       unsigned long deadline)
 {
-	unsigned long interval = params[0];
-	unsigned long duration = params[1];
+	unsigned int interval = params[0];
+	unsigned int duration = params[1];
 	unsigned long last_jiffies, t;
 	u32 last, cur;
 	int rc;
@@ -293,7 +295,7 @@ EXPORT_SYMBOL_GPL(sata_link_debounce);
  *	RETURNS:
  *	0 on success, -errno on failure.
  */
-int sata_link_resume(struct ata_link *link, const unsigned long *params,
+int sata_link_resume(struct ata_link *link, const unsigned int *params,
 		     unsigned long deadline)
 {
 	int tries = ATA_LINK_RESUME_TRIES;
@@ -394,10 +396,23 @@ int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
 	case ATA_LPM_MED_POWER_WITH_DIPM:
 	case ATA_LPM_MIN_POWER_WITH_PARTIAL:
 	case ATA_LPM_MIN_POWER:
-		if (ata_link_nr_enabled(link) > 0)
-			/* no restrictions on LPM transitions */
+		if (ata_link_nr_enabled(link) > 0) {
+			/* assume no restrictions on LPM transitions */
 			scontrol &= ~(0x7 << 8);
-		else {
+
+			/*
+			 * If the controller does not support partial, slumber,
+			 * or devsleep, then disallow these transitions.
+			 */
+			if (link->ap->host->flags & ATA_HOST_NO_PART)
+				scontrol |= (0x1 << 8);
+
+			if (link->ap->host->flags & ATA_HOST_NO_SSC)
+				scontrol |= (0x2 << 8);
+
+			if (link->ap->host->flags & ATA_HOST_NO_DEVSLP)
+				scontrol |= (0x4 << 8);
+		} else {
 			/* empty port, power off */
 			scontrol &= ~0xf;
 			scontrol |= (0x1 << 2);
@@ -503,6 +518,86 @@ int sata_set_spd(struct ata_link *link)
 EXPORT_SYMBOL_GPL(sata_set_spd);
 
 /**
+ *	sata_down_spd_limit - adjust SATA spd limit downward
+ *	@link: Link to adjust SATA spd limit for
+ *	@spd_limit: Additional limit
+ *
+ *	Adjust SATA spd limit of @link downward.  Note that this
+ *	function only adjusts the limit.  The change must be applied
+ *	using sata_set_spd().
+ *
+ *	If @spd_limit is non-zero, the speed is limited to equal to or
+ *	lower than @spd_limit if such speed is supported.  If
+ *	@spd_limit is slower than any supported speed, only the lowest
+ *	supported speed is allowed.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ *
+ *	RETURNS:
+ *	0 on success, negative errno on failure
+ */
+int sata_down_spd_limit(struct ata_link *link, u32 spd_limit)
+{
+	u32 sstatus, spd, mask;
+	int rc, bit;
+
+	if (!sata_scr_valid(link))
+		return -EOPNOTSUPP;
+
+	/* If SCR can be read, use it to determine the current SPD.
+	 * If not, use cached value in link->sata_spd.
+	 */
+	rc = sata_scr_read(link, SCR_STATUS, &sstatus);
+	if (rc == 0 && ata_sstatus_online(sstatus))
+		spd = (sstatus >> 4) & 0xf;
+	else
+		spd = link->sata_spd;
+
+	mask = link->sata_spd_limit;
+	if (mask <= 1)
+		return -EINVAL;
+
+	/* unconditionally mask off the highest bit */
+	bit = fls(mask) - 1;
+	mask &= ~(1 << bit);
+
+	/*
+	 * Mask off all speeds higher than or equal to the current one.  At
+	 * this point, if current SPD is not available and we previously
+	 * recorded the link speed from SStatus, the driver has already
+	 * masked off the highest bit so mask should already be 1 or 0.
+	 * Otherwise, we should not force 1.5Gbps on a link where we have
+	 * not previously recorded speed from SStatus.  Just return in this
+	 * case.
+	 */
+	if (spd > 1)
+		mask &= (1 << (spd - 1)) - 1;
+	else if (link->sata_spd)
+		return -EINVAL;
+
+	/* were we already at the bottom? */
+	if (!mask)
+		return -EINVAL;
+
+	if (spd_limit) {
+		if (mask & ((1 << spd_limit) - 1))
+			mask &= (1 << spd_limit) - 1;
+		else {
+			bit = ffs(mask) - 1;
+			mask = 1 << bit;
+		}
+	}
+
+	link->sata_spd_limit = mask;
+
+	ata_link_warn(link, "limiting SATA link speed to %s\n",
+		      sata_spd_string(fls(mask)));
+
+	return 0;
+}
+
+/**
  *	sata_link_hardreset - reset link via SATA phy reset
  *	@link: link to reset
  *	@timing: timing parameters { interval, duration, timeout } in msec
@@ -526,7 +621,7 @@ EXPORT_SYMBOL_GPL(sata_set_spd);
  *	RETURNS:
  *	0 on success, -errno otherwise.
  */
-int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
+int sata_link_hardreset(struct ata_link *link, const unsigned int *timing,
 			unsigned long deadline,
 			bool *online, int (*check_ready)(struct ata_link *))
 {
@@ -606,13 +701,40 @@ int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
 		/* online is set iff link is online && reset succeeded */
 		if (online)
 			*online = false;
-		ata_link_err(link, "COMRESET failed (errno=%d)\n", rc);
 	}
 	return rc;
 }
 EXPORT_SYMBOL_GPL(sata_link_hardreset);
 
 /**
+ *	sata_std_hardreset - COMRESET w/o waiting or classification
+ *	@link: link to reset
+ *	@class: resulting class of attached device
+ *	@deadline: deadline jiffies for the operation
+ *
+ *	Standard SATA COMRESET w/o waiting or classification.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep)
+ *
+ *	RETURNS:
+ *	0 if link offline, -EAGAIN if link online, -errno on errors.
+ */
+int sata_std_hardreset(struct ata_link *link, unsigned int *class,
+		       unsigned long deadline)
+{
+	const unsigned int *timing = sata_ehc_deb_timing(&link->eh_context);
+	bool online;
+	int rc;
+
+	rc = sata_link_hardreset(link, timing, deadline, &online, NULL);
+	if (online)
+		return -EAGAIN;
+	return rc;
+}
+EXPORT_SYMBOL_GPL(sata_std_hardreset);
+
+/**
  *	ata_qc_complete_multiple - Complete multiple qcs successfully
  *	@ap: port in question
  *	@qc_active: new qc_active mask
@@ -770,7 +892,7 @@ bool sata_lpm_ignore_phy_events(struct ata_link *link)
 EXPORT_SYMBOL_GPL(sata_lpm_ignore_phy_events);
 
 static const char *ata_lpm_policy_names[] = {
-	[ATA_LPM_UNKNOWN]		= "max_performance",
+	[ATA_LPM_UNKNOWN]		= "keep_firmware_settings",
 	[ATA_LPM_MAX_POWER]		= "max_performance",
 	[ATA_LPM_MED_POWER]		= "medium_power",
 	[ATA_LPM_MED_POWER_WITH_DIPM]	= "med_power_with_dipm",
@@ -778,14 +900,52 @@ static const char *ata_lpm_policy_names[] = {
 	[ATA_LPM_MIN_POWER]		= "min_power",
 };
 
+/*
+ * Check if a port supports link power management.
+ * Must be called with the port locked.
+ */
+static bool ata_scsi_lpm_supported(struct ata_port *ap)
+{
+	struct ata_link *link;
+	struct ata_device *dev;
+
+	if (ap->flags & ATA_FLAG_NO_LPM)
+		return false;
+
+	ata_for_each_link(link, ap, EDGE) {
+		ata_for_each_dev(dev, &ap->link, ENABLED) {
+			if (dev->quirks & ATA_QUIRK_NOLPM)
+				return false;
+		}
+	}
+
+	return true;
+}
+
+static ssize_t ata_scsi_lpm_supported_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct ata_port *ap = ata_shost_to_port(shost);
+	unsigned long flags;
+	bool supported;
+
+	spin_lock_irqsave(ap->lock, flags);
+	supported = ata_scsi_lpm_supported(ap);
+	spin_unlock_irqrestore(ap->lock, flags);
+
+	return sysfs_emit(buf, "%d\n", supported);
+}
+DEVICE_ATTR(link_power_management_supported, S_IRUGO,
+	    ata_scsi_lpm_supported_show, NULL);
+EXPORT_SYMBOL_GPL(dev_attr_link_power_management_supported);
+
 static ssize_t ata_scsi_lpm_store(struct device *device,
 				  struct device_attribute *attr,
 				  const char *buf, size_t count)
 {
 	struct Scsi_Host *shost = class_to_shost(device);
 	struct ata_port *ap = ata_shost_to_port(shost);
-	struct ata_link *link;
-	struct ata_device *dev;
 	enum ata_lpm_policy policy;
 	unsigned long flags;
 
@@ -802,13 +962,9 @@ static ssize_t ata_scsi_lpm_store(struct device *device,
 
 	spin_lock_irqsave(ap->lock, flags);
 
-	ata_for_each_link(link, ap, EDGE) {
-		ata_for_each_dev(dev, &ap->link, ENABLED) {
-			if (dev->horkage & ATA_HORKAGE_NOLPM) {
-				count = -EOPNOTSUPP;
-				goto out_unlock;
-			}
-		}
+	if (!ata_scsi_lpm_supported(ap)) {
+		count = -EOPNOTSUPP;
+		goto out_unlock;
 	}
 
 	ap->target_lpm_policy = policy;
@@ -834,88 +990,179 @@ DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR,
 	    ata_scsi_lpm_show, ata_scsi_lpm_store);
 EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy);
 
-static ssize_t ata_ncq_prio_supported_show(struct device *device,
-					   struct device_attribute *attr,
-					   char *buf)
+/**
+ *	ata_ncq_prio_supported - Check if device supports NCQ Priority
+ *	@ap: ATA port of the target device
+ *	@sdev: SCSI device
+ *	@supported: Address of a boolean to store the result
+ *
+ *	Helper to check if device supports NCQ Priority feature.
+ *
+ *	Context: Any context. Takes and releases @ap->lock.
+ *
+ *	Return:
+ *	* %0		- OK. Status is stored into @supported
+ *	* %-ENODEV	- Failed to find the ATA device
+ */
+int ata_ncq_prio_supported(struct ata_port *ap, struct scsi_device *sdev,
+			   bool *supported)
 {
-	struct scsi_device *sdev = to_scsi_device(device);
-	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct ata_device *dev;
-	bool ncq_prio_supported;
+	unsigned long flags;
 	int rc = 0;
 
-	spin_lock_irq(ap->lock);
+	spin_lock_irqsave(ap->lock, flags);
 	dev = ata_scsi_find_dev(ap, sdev);
 	if (!dev)
 		rc = -ENODEV;
 	else
-		ncq_prio_supported = dev->flags & ATA_DFLAG_NCQ_PRIO;
-	spin_unlock_irq(ap->lock);
+		*supported = dev->flags & ATA_DFLAG_NCQ_PRIO;
+	spin_unlock_irqrestore(ap->lock, flags);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ata_ncq_prio_supported);
+
+static ssize_t ata_ncq_prio_supported_show(struct device *device,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	struct scsi_device *sdev = to_scsi_device(device);
+	struct ata_port *ap = ata_shost_to_port(sdev->host);
+	bool supported;
+	int rc;
+
+	rc = ata_ncq_prio_supported(ap, sdev, &supported);
+	if (rc)
+		return rc;
 
-	return rc ? rc : sysfs_emit(buf, "%u\n", ncq_prio_supported);
+	return sysfs_emit(buf, "%d\n", supported);
 }
 
 DEVICE_ATTR(ncq_prio_supported, S_IRUGO, ata_ncq_prio_supported_show, NULL);
 EXPORT_SYMBOL_GPL(dev_attr_ncq_prio_supported);
 
-static ssize_t ata_ncq_prio_enable_show(struct device *device,
-					struct device_attribute *attr,
-					char *buf)
+/**
+ *	ata_ncq_prio_enabled - Check if NCQ Priority is enabled
+ *	@ap: ATA port of the target device
+ *	@sdev: SCSI device
+ *	@enabled: Address of a boolean to store the result
+ *
+ *	Helper to check if NCQ Priority feature is enabled.
+ *
+ *	Context: Any context. Takes and releases @ap->lock.
+ *
+ *	Return:
+ *	* %0		- OK. Status is stored into @enabled
+ *	* %-ENODEV	- Failed to find the ATA device
+ */
+int ata_ncq_prio_enabled(struct ata_port *ap, struct scsi_device *sdev,
+			 bool *enabled)
 {
-	struct scsi_device *sdev = to_scsi_device(device);
-	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct ata_device *dev;
-	bool ncq_prio_enable;
+	unsigned long flags;
 	int rc = 0;
 
-	spin_lock_irq(ap->lock);
+	spin_lock_irqsave(ap->lock, flags);
 	dev = ata_scsi_find_dev(ap, sdev);
 	if (!dev)
 		rc = -ENODEV;
 	else
-		ncq_prio_enable = dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLED;
-	spin_unlock_irq(ap->lock);
+		*enabled = dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLED;
+	spin_unlock_irqrestore(ap->lock, flags);
 
-	return rc ? rc : sysfs_emit(buf, "%u\n", ncq_prio_enable);
+	return rc;
 }
+EXPORT_SYMBOL_GPL(ata_ncq_prio_enabled);
 
-static ssize_t ata_ncq_prio_enable_store(struct device *device,
-					 struct device_attribute *attr,
-					 const char *buf, size_t len)
+static ssize_t ata_ncq_prio_enable_show(struct device *device,
+					struct device_attribute *attr,
+					char *buf)
 {
 	struct scsi_device *sdev = to_scsi_device(device);
-	struct ata_port *ap;
-	struct ata_device *dev;
-	long int input;
-	int rc = 0;
+	struct ata_port *ap = ata_shost_to_port(sdev->host);
+	bool enabled;
+	int rc;
 
-	rc = kstrtol(buf, 10, &input);
+	rc = ata_ncq_prio_enabled(ap, sdev, &enabled);
 	if (rc)
 		return rc;
-	if ((input < 0) || (input > 1))
-		return -EINVAL;
 
-	ap = ata_shost_to_port(sdev->host);
-	dev = ata_scsi_find_dev(ap, sdev);
-	if (unlikely(!dev))
-		return  -ENODEV;
+	return sysfs_emit(buf, "%d\n", enabled);
+}
 
-	spin_lock_irq(ap->lock);
+/**
+ *	ata_ncq_prio_enable - Enable/disable NCQ Priority
+ *	@ap: ATA port of the target device
+ *	@sdev: SCSI device
+ *	@enable: true - enable NCQ Priority, false - disable NCQ Priority
+ *
+ *	Helper to enable/disable NCQ Priority feature.
+ *
+ *	Context: Any context. Takes and releases @ap->lock.
+ *
+ *	Return:
+ *	* %0		- OK. Status is stored into @enabled
+ *	* %-ENODEV	- Failed to find the ATA device
+ *	* %-EINVAL	- NCQ Priority is not supported or CDL is enabled
+ */
+int ata_ncq_prio_enable(struct ata_port *ap, struct scsi_device *sdev,
+			bool enable)
+{
+	struct ata_device *dev;
+	unsigned long flags;
+	int rc = 0;
+
+	spin_lock_irqsave(ap->lock, flags);
+
+	dev = ata_scsi_find_dev(ap, sdev);
+	if (!dev) {
+		rc = -ENODEV;
+		goto unlock;
+	}
 
 	if (!(dev->flags & ATA_DFLAG_NCQ_PRIO)) {
 		rc = -EINVAL;
 		goto unlock;
 	}
 
-	if (input)
+	if (enable) {
+		if (dev->flags & ATA_DFLAG_CDL_ENABLED) {
+			ata_dev_err(dev,
+				"CDL must be disabled to enable NCQ priority\n");
+			rc = -EINVAL;
+			goto unlock;
+		}
 		dev->flags |= ATA_DFLAG_NCQ_PRIO_ENABLED;
-	else
+	} else {
 		dev->flags &= ~ATA_DFLAG_NCQ_PRIO_ENABLED;
+	}
 
 unlock:
-	spin_unlock_irq(ap->lock);
+	spin_unlock_irqrestore(ap->lock, flags);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ata_ncq_prio_enable);
+
+static ssize_t ata_ncq_prio_enable_store(struct device *device,
+					 struct device_attribute *attr,
+					 const char *buf, size_t len)
+{
+	struct scsi_device *sdev = to_scsi_device(device);
+	struct ata_port *ap = ata_shost_to_port(sdev->host);
+	bool enable;
+	int rc;
+
+	rc = kstrtobool(buf, &enable);
+	if (rc)
+		return rc;
+
+	rc = ata_ncq_prio_enable(ap, sdev, enable);
+	if (rc)
+		return rc;
 
-	return rc ? rc : len;
+	return len;
 }
 
 DEVICE_ATTR(ncq_prio_enable, S_IRUGO | S_IWUSR,
@@ -1023,7 +1270,6 @@ EXPORT_SYMBOL_GPL(dev_attr_sw_activity);
 /**
  *	ata_change_queue_depth - Set a device maximum queue depth
  *	@ap: ATA port of the target device
- *	@dev: target ATA device
  *	@sdev: SCSI device to configure queue depth for
  *	@queue_depth: new queue depth
  *
@@ -1031,33 +1277,47 @@ EXPORT_SYMBOL_GPL(dev_attr_sw_activity);
  *	and libata.
  *
  */
-int ata_change_queue_depth(struct ata_port *ap, struct ata_device *dev,
-			   struct scsi_device *sdev, int queue_depth)
+int ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev,
+			   int queue_depth)
 {
+	struct ata_device *dev;
 	unsigned long flags;
+	int max_queue_depth;
 
-	if (!dev || !ata_dev_enabled(dev))
-		return sdev->queue_depth;
+	spin_lock_irqsave(ap->lock, flags);
 
-	if (queue_depth < 1 || queue_depth == sdev->queue_depth)
+	dev = ata_scsi_find_dev(ap, sdev);
+	if (!dev || queue_depth < 1 || queue_depth == sdev->queue_depth) {
+		spin_unlock_irqrestore(ap->lock, flags);
 		return sdev->queue_depth;
+	}
 
-	/* NCQ enabled? */
-	spin_lock_irqsave(ap->lock, flags);
-	dev->flags &= ~ATA_DFLAG_NCQ_OFF;
-	if (queue_depth == 1 || !ata_ncq_enabled(dev)) {
+	/*
+	 * Make sure that the queue depth requested does not exceed the device
+	 * capabilities.
+	 */
+	max_queue_depth = min(ATA_MAX_QUEUE, sdev->host->can_queue);
+	max_queue_depth = min(max_queue_depth, ata_id_queue_depth(dev->id));
+	if (queue_depth > max_queue_depth) {
+		spin_unlock_irqrestore(ap->lock, flags);
+		return -EINVAL;
+	}
+
+	/*
+	 * If NCQ is not supported by the device or if the target queue depth
+	 * is 1 (to disable drive side command queueing), turn off NCQ.
+	 */
+	if (queue_depth == 1 || !ata_ncq_supported(dev)) {
 		dev->flags |= ATA_DFLAG_NCQ_OFF;
 		queue_depth = 1;
+	} else {
+		dev->flags &= ~ATA_DFLAG_NCQ_OFF;
 	}
-	spin_unlock_irqrestore(ap->lock, flags);
 
-	/* limit and apply queue depth */
-	queue_depth = min(queue_depth, sdev->host->can_queue);
-	queue_depth = min(queue_depth, ata_id_queue_depth(dev->id));
-	queue_depth = min(queue_depth, ATA_MAX_QUEUE);
+	spin_unlock_irqrestore(ap->lock, flags);
 
-	if (sdev->queue_depth == queue_depth)
-		return -EINVAL;
+	if (queue_depth == sdev->queue_depth)
+		return sdev->queue_depth;
 
 	return scsi_change_queue_depth(sdev, queue_depth);
 }
@@ -1082,170 +1342,29 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth)
 {
 	struct ata_port *ap = ata_shost_to_port(sdev->host);
 
-	return ata_change_queue_depth(ap, ata_scsi_find_dev(ap, sdev),
-				      sdev, queue_depth);
+	return ata_change_queue_depth(ap, sdev, queue_depth);
 }
 EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth);
 
 /**
- *	ata_sas_port_alloc - Allocate port for a SAS attached SATA device
- *	@host: ATA host container for all SAS ports
- *	@port_info: Information from low-level host driver
- *	@shost: SCSI host that the scsi device is attached to
- *
- *	LOCKING:
- *	PCI/etc. bus probe sem.
- *
- *	RETURNS:
- *	ata_port pointer on success / NULL on failure.
- */
-
-struct ata_port *ata_sas_port_alloc(struct ata_host *host,
-				    struct ata_port_info *port_info,
-				    struct Scsi_Host *shost)
-{
-	struct ata_port *ap;
-
-	ap = ata_port_alloc(host);
-	if (!ap)
-		return NULL;
-
-	ap->port_no = 0;
-	ap->lock = &host->lock;
-	ap->pio_mask = port_info->pio_mask;
-	ap->mwdma_mask = port_info->mwdma_mask;
-	ap->udma_mask = port_info->udma_mask;
-	ap->flags |= port_info->flags;
-	ap->ops = port_info->port_ops;
-	ap->cbl = ATA_CBL_SATA;
-
-	return ap;
-}
-EXPORT_SYMBOL_GPL(ata_sas_port_alloc);
-
-/**
- *	ata_sas_port_start - Set port up for dma.
- *	@ap: Port to initialize
- *
- *	Called just after data structures for each port are
- *	initialized.
- *
- *	May be used as the port_start() entry in ata_port_operations.
- *
- *	LOCKING:
- *	Inherited from caller.
- */
-int ata_sas_port_start(struct ata_port *ap)
-{
-	/*
-	 * the port is marked as frozen at allocation time, but if we don't
-	 * have new eh, we won't thaw it
-	 */
-	if (!ap->ops->error_handler)
-		ap->pflags &= ~ATA_PFLAG_FROZEN;
-	return 0;
-}
-EXPORT_SYMBOL_GPL(ata_sas_port_start);
-
-/**
- *	ata_sas_port_stop - Undo ata_sas_port_start()
- *	@ap: Port to shut down
- *
- *	May be used as the port_stop() entry in ata_port_operations.
- *
- *	LOCKING:
- *	Inherited from caller.
- */
-
-void ata_sas_port_stop(struct ata_port *ap)
-{
-}
-EXPORT_SYMBOL_GPL(ata_sas_port_stop);
-
-/**
- * ata_sas_async_probe - simply schedule probing and return
- * @ap: Port to probe
- *
- * For batch scheduling of probe for sas attached ata devices, assumes
- * the port has already been through ata_sas_port_init()
- */
-void ata_sas_async_probe(struct ata_port *ap)
-{
-	__ata_port_probe(ap);
-}
-EXPORT_SYMBOL_GPL(ata_sas_async_probe);
-
-int ata_sas_sync_probe(struct ata_port *ap)
-{
-	return ata_port_probe(ap);
-}
-EXPORT_SYMBOL_GPL(ata_sas_sync_probe);
-
-
-/**
- *	ata_sas_port_init - Initialize a SATA device
- *	@ap: SATA port to initialize
- *
- *	LOCKING:
- *	PCI/etc. bus probe sem.
- *
- *	RETURNS:
- *	Zero on success, non-zero on error.
- */
-
-int ata_sas_port_init(struct ata_port *ap)
-{
-	int rc = ap->ops->port_start(ap);
-
-	if (rc)
-		return rc;
-	ap->print_id = atomic_inc_return(&ata_print_id);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(ata_sas_port_init);
-
-int ata_sas_tport_add(struct device *parent, struct ata_port *ap)
-{
-	return ata_tport_add(parent, ap);
-}
-EXPORT_SYMBOL_GPL(ata_sas_tport_add);
-
-void ata_sas_tport_delete(struct ata_port *ap)
-{
-	ata_tport_delete(ap);
-}
-EXPORT_SYMBOL_GPL(ata_sas_tport_delete);
-
-/**
- *	ata_sas_port_destroy - Destroy a SATA port allocated by ata_sas_port_alloc
- *	@ap: SATA port to destroy
- *
- */
-
-void ata_sas_port_destroy(struct ata_port *ap)
-{
-	if (ap->ops->port_stop)
-		ap->ops->port_stop(ap);
-	kfree(ap);
-}
-EXPORT_SYMBOL_GPL(ata_sas_port_destroy);
-
-/**
- *	ata_sas_slave_configure - Default slave_config routine for libata devices
+ *	ata_sas_sdev_configure - Default sdev_configure routine for libata
+ *				   devices
  *	@sdev: SCSI device to configure
+ *	@lim: queue limits
  *	@ap: ATA port to which SCSI device is attached
  *
  *	RETURNS:
  *	Zero.
  */
 
-int ata_sas_slave_configure(struct scsi_device *sdev, struct ata_port *ap)
+int ata_sas_sdev_configure(struct scsi_device *sdev, struct queue_limits *lim,
+			   struct ata_port *ap)
 {
 	ata_scsi_sdev_config(sdev);
-	ata_scsi_dev_config(sdev, ap->link.device);
-	return 0;
+
+	return ata_scsi_dev_config(sdev, lim, ap->link.device);
 }
-EXPORT_SYMBOL_GPL(ata_sas_slave_configure);
+EXPORT_SYMBOL_GPL(ata_sas_sdev_configure);
 
 /**
  *	ata_sas_queuecmd - Issue SCSI cdb to libata-managed device
@@ -1363,7 +1482,7 @@ EXPORT_SYMBOL_GPL(sata_async_notification);
 static int ata_eh_read_log_10h(struct ata_device *dev,
 			       int *tag, struct ata_taskfile *tf)
 {
-	u8 *buf = dev->link->ap->sector_buf;
+	u8 *buf = dev->sector_buf;
 	unsigned int err_mask;
 	u8 csum;
 	int i;
@@ -1402,6 +1521,107 @@ static int ata_eh_read_log_10h(struct ata_device *dev,
 }
 
 /**
+ *	ata_eh_get_ncq_success_sense - Read and process the sense data for
+ *				       successful NCQ commands log page
+ *	@link: ATA link to get sense data for
+ *
+ *	Read the sense data for successful NCQ commands log page to obtain
+ *	sense data for all NCQ commands that completed successfully with
+ *	the sense data available bit set.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep).
+ *
+ *	RETURNS:
+ *	0 on success, -errno otherwise.
+ */
+int ata_eh_get_ncq_success_sense(struct ata_link *link)
+{
+	struct ata_device *dev = link->device;
+	struct ata_port *ap = dev->link->ap;
+	u8 *buf = dev->cdl->ncq_sense_log_buf;
+	struct ata_queued_cmd *qc;
+	unsigned int err_mask, tag;
+	u8 *sense, sk = 0, asc = 0, ascq = 0;
+	u16 extended_sense;
+	bool aux_icc_valid;
+	u32 sense_valid;
+	u64 val;
+	int ret = 0;
+
+	err_mask = ata_read_log_page(dev, ATA_LOG_SENSE_NCQ, 0, buf, 2);
+	if (err_mask) {
+		ata_dev_err(dev,
+			"Failed to read Sense Data for Successful NCQ Commands log\n");
+		return -EIO;
+	}
+
+	/* Check the log header */
+	val = get_unaligned_le64(&buf[0]);
+	if ((val & 0xffff) != 1 || ((val >> 16) & 0xff) != 0x0f) {
+		ata_dev_err(dev,
+			"Invalid Sense Data for Successful NCQ Commands log\n");
+		return -EIO;
+	}
+
+	sense_valid = get_unaligned_le32(&buf[8]);
+	extended_sense = get_unaligned_le16(&buf[14]);
+	aux_icc_valid = extended_sense & BIT(15);
+
+	ata_qc_for_each_raw(ap, qc, tag) {
+		if (!(qc->flags & ATA_QCFLAG_EH) ||
+		    !(qc->flags & ATA_QCFLAG_EH_SUCCESS_CMD) ||
+		    qc->err_mask ||
+		    ata_dev_phys_link(qc->dev) != link)
+			continue;
+
+		/*
+		 * If the command does not have any sense data, clear ATA_SENSE.
+		 * Keep ATA_QCFLAG_EH_SUCCESS_CMD so that command is finished.
+		 */
+		if (!(sense_valid & BIT(tag))) {
+			qc->result_tf.status &= ~ATA_SENSE;
+			continue;
+		}
+
+		sense = &buf[32 + 24 * tag];
+		sk = sense[0];
+		asc = sense[1];
+		ascq = sense[2];
+
+		if (!ata_scsi_sense_is_valid(sk, asc, ascq)) {
+			ret = -EIO;
+			continue;
+		}
+
+		qc->result_tf.nsect = sense[6];
+		qc->result_tf.hob_nsect = sense[7];
+		qc->result_tf.lbal = sense[8];
+		qc->result_tf.lbam = sense[9];
+		qc->result_tf.lbah = sense[10];
+		qc->result_tf.hob_lbal = sense[11];
+		qc->result_tf.hob_lbam = sense[12];
+		qc->result_tf.hob_lbah = sense[13];
+		if (aux_icc_valid)
+			qc->result_tf.auxiliary = get_unaligned_le32(&sense[16]);
+
+		/* Set sense without also setting scsicmd->result */
+		scsi_build_sense_buffer(dev->flags & ATA_DFLAG_D_SENSE,
+					qc->scsicmd->sense_buffer, sk,
+					asc, ascq);
+		qc->flags |= ATA_QCFLAG_SENSE_VALID;
+
+		/*
+		 * No point in checking the return value, since the command has
+		 * already completed successfully.
+		 */
+		ata_eh_decide_disposition(qc);
+	}
+
+	return ret;
+}
+
+/**
  *	ata_eh_analyze_ncq_error - analyze NCQ error
  *	@link: ATA link to analyze NCQ error for
  *
@@ -1448,7 +1668,7 @@ void ata_eh_analyze_ncq_error(struct ata_link *link)
 		return;
 	}
 
-	if (!(link->sactive & (1 << tag))) {
+	if (!(link->sactive & BIT(tag))) {
 		ata_link_err(link, "log page 10h reported inactive tag %d\n",
 			     tag);
 		return;
@@ -1473,14 +1693,13 @@ void ata_eh_analyze_ncq_error(struct ata_link *link)
 		if (ata_scsi_sense_is_valid(sense_key, asc, ascq)) {
 			ata_scsi_set_sense(dev, qc->scsicmd, sense_key, asc,
 					   ascq);
-			ata_scsi_set_sense_information(dev, qc->scsicmd,
-						       &qc->result_tf);
 			qc->flags |= ATA_QCFLAG_SENSE_VALID;
 		}
 	}
 
 	ata_qc_for_each_raw(ap, qc, tag) {
 		if (!(qc->flags & ATA_QCFLAG_EH) ||
+		    qc->flags & ATA_QCFLAG_EH_SUCCESS_CMD ||
 		    ata_dev_phys_link(qc->dev) != link)
 			continue;
 
@@ -1509,3 +1728,11 @@ void ata_eh_analyze_ncq_error(struct ata_link *link)
 	ehc->i.err_mask &= ~AC_ERR_DEV;
 }
 EXPORT_SYMBOL_GPL(ata_eh_analyze_ncq_error);
+
+const struct ata_port_operations sata_port_ops = {
+	.inherits		= &ata_base_port_ops,
+
+	.qc_defer		= ata_std_qc_defer,
+	.reset.hardreset	= sata_std_hardreset,
+};
+EXPORT_SYMBOL_GPL(sata_port_ops);