1 files changed, 25 insertions, 15 deletions

diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index a26367e9fb19..acba83156de9 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -102,7 +102,8 @@ static inline struct sk_buff *hci_uart_dequeue(struct hci_uart *hu)
 	if (!skb) {
 		percpu_down_read(&hu->proto_lock);
 
-		if (test_bit(HCI_UART_PROTO_READY, &hu->flags))
+		if (test_bit(HCI_UART_PROTO_READY, &hu->flags) ||
+		    test_bit(HCI_UART_PROTO_INIT, &hu->flags))
 			skb = hu->proto->dequeue(hu);
 
 		percpu_up_read(&hu->proto_lock);
@@ -124,7 +125,8 @@ int hci_uart_tx_wakeup(struct hci_uart *hu)
 	if (!percpu_down_read_trylock(&hu->proto_lock))
 		return 0;
 
-	if (!test_bit(HCI_UART_PROTO_READY, &hu->flags))
+	if (!test_bit(HCI_UART_PROTO_READY, &hu->flags) &&
+	    !test_bit(HCI_UART_PROTO_INIT, &hu->flags))
 		goto no_schedule;
 
 	set_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
@@ -278,7 +280,8 @@ static int hci_uart_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
 
 	percpu_down_read(&hu->proto_lock);
 
-	if (!test_bit(HCI_UART_PROTO_READY, &hu->flags)) {
+	if (!test_bit(HCI_UART_PROTO_READY, &hu->flags) &&
+	    !test_bit(HCI_UART_PROTO_INIT, &hu->flags)) {
 		percpu_up_read(&hu->proto_lock);
 		return -EUNATCH;
 	}
@@ -488,7 +491,7 @@ static int hci_uart_tty_open(struct tty_struct *tty)
 	if (tty->ops->write == NULL)
 		return -EOPNOTSUPP;
 
-	hu = kzalloc(sizeof(struct hci_uart), GFP_KERNEL);
+	hu = kzalloc(sizeof(*hu), GFP_KERNEL);
 	if (!hu) {
 		BT_ERR("Can't allocate control structure");
 		return -ENFILE;
@@ -507,6 +510,9 @@ static int hci_uart_tty_open(struct tty_struct *tty)
 	hu->alignment = 1;
 	hu->padding = 0;
 
+	/* Use serial port speed as oper_speed */
+	hu->oper_speed = tty->termios.c_ospeed;
+
 	INIT_WORK(&hu->init_ready, hci_uart_init_work);
 	INIT_WORK(&hu->write_work, hci_uart_write_work);
 
@@ -582,7 +588,8 @@ static void hci_uart_tty_wakeup(struct tty_struct *tty)
 	if (tty != hu->tty)
 		return;
 
-	if (test_bit(HCI_UART_PROTO_READY, &hu->flags))
+	if (test_bit(HCI_UART_PROTO_READY, &hu->flags) ||
+	    test_bit(HCI_UART_PROTO_INIT, &hu->flags))
 		hci_uart_tx_wakeup(hu);
 }
 
@@ -591,7 +598,7 @@ static void hci_uart_tty_wakeup(struct tty_struct *tty)
  *     Called by tty low level driver when receive data is
  *     available.
  *
- * Arguments:  tty          pointer to tty isntance data
+ * Arguments:  tty          pointer to tty instance data
  *             data         pointer to received data
  *             flags        pointer to flags for data
  *             count        count of received data in bytes
@@ -608,7 +615,8 @@ static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data,
 
 	percpu_down_read(&hu->proto_lock);
 
-	if (!test_bit(HCI_UART_PROTO_READY, &hu->flags)) {
+	if (!test_bit(HCI_UART_PROTO_READY, &hu->flags) &&
+	    !test_bit(HCI_UART_PROTO_INIT, &hu->flags)) {
 		percpu_up_read(&hu->proto_lock);
 		return;
 	}
@@ -667,11 +675,6 @@ static int hci_uart_register_dev(struct hci_uart *hu)
 	if (!test_bit(HCI_UART_RESET_ON_INIT, &hu->hdev_flags))
 		set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
 
-	if (test_bit(HCI_UART_CREATE_AMP, &hu->hdev_flags))
-		hdev->dev_type = HCI_AMP;
-	else
-		hdev->dev_type = HCI_PRIMARY;
-
 	/* Only call open() for the protocol after hdev is fully initialized as
 	 * open() (or a timer/workqueue it starts) may attempt to reference it.
 	 */
@@ -709,12 +712,16 @@ static int hci_uart_set_proto(struct hci_uart *hu, int id)
 
 	hu->proto = p;
 
+	set_bit(HCI_UART_PROTO_INIT, &hu->flags);
+
 	err = hci_uart_register_dev(hu);
 	if (err) {
 		return err;
 	}
 
 	set_bit(HCI_UART_PROTO_READY, &hu->flags);
+	clear_bit(HCI_UART_PROTO_INIT, &hu->flags);
+
 	return 0;
 }
 
@@ -722,7 +729,6 @@ static int hci_uart_set_flags(struct hci_uart *hu, unsigned long flags)
 {
 	unsigned long valid_flags = BIT(HCI_UART_RAW_DEVICE) |
 				    BIT(HCI_UART_RESET_ON_INIT) |
-				    BIT(HCI_UART_CREATE_AMP) |
 				    BIT(HCI_UART_INIT_PENDING) |
 				    BIT(HCI_UART_EXT_CONFIG) |
 				    BIT(HCI_UART_VND_DETECT);
@@ -876,7 +882,9 @@ static int __init hci_uart_init(void)
 #ifdef CONFIG_BT_HCIUART_MRVL
 	mrvl_init();
 #endif
-
+#ifdef CONFIG_BT_HCIUART_AML
+	aml_init();
+#endif
 	return 0;
 }
 
@@ -912,7 +920,9 @@ static void __exit hci_uart_exit(void)
 #ifdef CONFIG_BT_HCIUART_MRVL
 	mrvl_deinit();
 #endif
-
+#ifdef CONFIG_BT_HCIUART_AML
+	aml_deinit();
+#endif
 	tty_unregister_ldisc(&hci_uart_ldisc);
 }