diff options
Diffstat (limited to 'drivers/char/tpm/st33zp24/st33zp24.c')
| -rw-r--r-- | drivers/char/tpm/st33zp24/st33zp24.c | 168 |
1 files changed, 53 insertions, 115 deletions
diff --git a/drivers/char/tpm/st33zp24/st33zp24.c b/drivers/char/tpm/st33zp24/st33zp24.c index 4ec10ab5e576..2ed7815e4899 100644 --- a/drivers/char/tpm/st33zp24/st33zp24.c +++ b/drivers/char/tpm/st33zp24/st33zp24.c @@ -4,6 +4,7 @@ * Copyright (C) 2009 - 2016 STMicroelectronics */ +#include <linux/acpi.h> #include <linux/module.h> #include <linux/fs.h> #include <linux/kernel.h> @@ -12,7 +13,7 @@ #include <linux/freezer.h> #include <linux/string.h> #include <linux/interrupt.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/sched.h> #include <linux/uaccess.h> #include <linux/io.h> @@ -61,9 +62,7 @@ enum tis_defaults { }; /* - * clear_interruption clear the pending interrupt. - * @param: tpm_dev, the tpm device device. - * @return: the interrupt status value. + * clear the pending interrupt. */ static u8 clear_interruption(struct st33zp24_dev *tpm_dev) { @@ -72,12 +71,10 @@ static u8 clear_interruption(struct st33zp24_dev *tpm_dev) tpm_dev->ops->recv(tpm_dev->phy_id, TPM_INT_STATUS, &interrupt, 1); tpm_dev->ops->send(tpm_dev->phy_id, TPM_INT_STATUS, &interrupt, 1); return interrupt; -} /* clear_interruption() */ +} /* - * st33zp24_cancel, cancel the current command execution or - * set STS to COMMAND READY. - * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h + * cancel the current command execution or set STS to COMMAND READY. */ static void st33zp24_cancel(struct tpm_chip *chip) { @@ -86,12 +83,10 @@ static void st33zp24_cancel(struct tpm_chip *chip) data = TPM_STS_COMMAND_READY; tpm_dev->ops->send(tpm_dev->phy_id, TPM_STS, &data, 1); -} /* st33zp24_cancel() */ +} /* - * st33zp24_status return the TPM_STS register - * @param: chip, the tpm chip description - * @return: the TPM_STS register value. + * return the TPM_STS register */ static u8 st33zp24_status(struct tpm_chip *chip) { @@ -100,12 +95,10 @@ static u8 st33zp24_status(struct tpm_chip *chip) tpm_dev->ops->recv(tpm_dev->phy_id, TPM_STS, &data, 1); return data; -} /* st33zp24_status() */ +} /* - * check_locality if the locality is active - * @param: chip, the tpm chip description - * @return: true if LOCALITY0 is active, otherwise false + * if the locality is active */ static bool check_locality(struct tpm_chip *chip) { @@ -120,13 +113,8 @@ static bool check_locality(struct tpm_chip *chip) return true; return false; -} /* check_locality() */ +} -/* - * request_locality request the TPM locality - * @param: chip, the chip description - * @return: the active locality or negative value. - */ static int request_locality(struct tpm_chip *chip) { struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); @@ -153,12 +141,8 @@ static int request_locality(struct tpm_chip *chip) /* could not get locality */ return -EACCES; -} /* request_locality() */ +} -/* - * release_locality release the active locality - * @param: chip, the tpm chip description. - */ static void release_locality(struct tpm_chip *chip) { struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); @@ -171,8 +155,6 @@ static void release_locality(struct tpm_chip *chip) /* * get_burstcount return the burstcount value - * @param: chip, the chip description - * return: the burstcount or negative value. */ static int get_burstcount(struct tpm_chip *chip) { @@ -200,18 +182,8 @@ static int get_burstcount(struct tpm_chip *chip) msleep(TPM_TIMEOUT); } while (time_before(jiffies, stop)); return -EBUSY; -} /* get_burstcount() */ - +} -/* - * wait_for_tpm_stat_cond - * @param: chip, chip description - * @param: mask, expected mask value - * @param: check_cancel, does the command expected to be canceled ? - * @param: canceled, did we received a cancel request ? - * @return: true if status == mask or if the command is canceled. - * false in other cases. - */ static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask, bool check_cancel, bool *canceled) { @@ -228,13 +200,7 @@ static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask, } /* - * wait_for_stat wait for a TPM_STS value - * @param: chip, the tpm chip description - * @param: mask, the value mask to wait - * @param: timeout, the timeout - * @param: queue, the wait queue. - * @param: check_cancel, does the command can be cancelled ? - * @return: the tpm status, 0 if success, -ETIME if timeout is reached. + * wait for a TPM_STS value */ static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout, wait_queue_head_t *queue, bool check_cancel) @@ -292,15 +258,8 @@ static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout, } return -ETIME; -} /* wait_for_stat() */ +} -/* - * recv_data receive data - * @param: chip, the tpm chip description - * @param: buf, the buffer where the data are received - * @param: count, the number of data to receive - * @return: the number of bytes read from TPM FIFO. - */ static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count) { struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); @@ -325,12 +284,6 @@ static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count) return size; } -/* - * tpm_ioserirq_handler the serirq irq handler - * @param: irq, the tpm chip description - * @param: dev_id, the description of the chip - * @return: the status of the handler. - */ static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id) { struct tpm_chip *chip = dev_id; @@ -341,19 +294,13 @@ static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id) disable_irq_nosync(tpm_dev->irq); return IRQ_HANDLED; -} /* tpm_ioserirq_handler() */ +} /* - * st33zp24_send send TPM commands through the I2C bus. - * - * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h - * @param: buf, the buffer to send. - * @param: count, the number of bytes to send. - * @return: In case of success the number of bytes sent. - * In other case, a < 0 value describing the issue. + * send TPM commands through the I2C bus. */ static int st33zp24_send(struct tpm_chip *chip, unsigned char *buf, - size_t len) + size_t bufsiz, size_t len) { struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); u32 status, i, size, ordinal; @@ -431,14 +378,6 @@ out_err: return ret; } -/* - * st33zp24_recv received TPM response through TPM phy. - * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h. - * @param: buf, the buffer to store datas. - * @param: count, the number of bytes to send. - * @return: In case of success the number of bytes received. - * In other case, a < 0 value describing the issue. - */ static int st33zp24_recv(struct tpm_chip *chip, unsigned char *buf, size_t count) { @@ -478,12 +417,6 @@ out: return size; } -/* - * st33zp24_req_canceled - * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h. - * @param: status, the TPM status. - * @return: Does TPM ready to compute a new command ? true. - */ static bool st33zp24_req_canceled(struct tpm_chip *chip, u8 status) { return (status == TPM_STS_COMMAND_READY); @@ -500,15 +433,18 @@ static const struct tpm_class_ops st33zp24_tpm = { .req_canceled = st33zp24_req_canceled, }; +static const struct acpi_gpio_params lpcpd_gpios = { 1, 0, false }; + +static const struct acpi_gpio_mapping acpi_st33zp24_gpios[] = { + { "lpcpd-gpios", &lpcpd_gpios, 1 }, + { }, +}; + /* - * st33zp24_probe initialize the TPM device - * @param: client, the i2c_client description (TPM I2C description). - * @param: id, the i2c_device_id struct. - * @return: 0 in case of success. - * -1 in other case. + * initialize the TPM device */ int st33zp24_probe(void *phy_id, const struct st33zp24_phy_ops *ops, - struct device *dev, int irq, int io_lpcpd) + struct device *dev, int irq) { int ret; u8 intmask = 0; @@ -535,6 +471,25 @@ int st33zp24_probe(void *phy_id, const struct st33zp24_phy_ops *ops, tpm_dev->locality = LOCALITY0; + if (ACPI_COMPANION(dev)) { + ret = devm_acpi_dev_add_driver_gpios(dev, acpi_st33zp24_gpios); + if (ret) + return ret; + } + + /* + * Get LPCPD GPIO. If lpcpd pin is not specified. This is not an + * issue as power management can be also managed by TPM specific + * commands. + */ + tpm_dev->io_lpcpd = devm_gpiod_get_optional(dev, "lpcpd", + GPIOD_OUT_HIGH); + ret = PTR_ERR_OR_ZERO(tpm_dev->io_lpcpd); + if (ret) { + dev_err(dev, "failed to request lpcpd gpio: %d\n", ret); + return ret; + } + if (irq) { /* INTERRUPT Setup */ init_waitqueue_head(&tpm_dev->read_queue); @@ -583,25 +538,13 @@ _tpm_clean_answer: } EXPORT_SYMBOL(st33zp24_probe); -/* - * st33zp24_remove remove the TPM device - * @param: tpm_data, the tpm phy. - * @return: 0 in case of success. - */ -int st33zp24_remove(struct tpm_chip *chip) +void st33zp24_remove(struct tpm_chip *chip) { tpm_chip_unregister(chip); - return 0; } EXPORT_SYMBOL(st33zp24_remove); #ifdef CONFIG_PM_SLEEP -/* - * st33zp24_pm_suspend suspend the TPM device - * @param: tpm_data, the tpm phy. - * @param: mesg, the power management message. - * @return: 0 in case of success. - */ int st33zp24_pm_suspend(struct device *dev) { struct tpm_chip *chip = dev_get_drvdata(dev); @@ -609,28 +552,23 @@ int st33zp24_pm_suspend(struct device *dev) int ret = 0; - if (gpio_is_valid(tpm_dev->io_lpcpd)) - gpio_set_value(tpm_dev->io_lpcpd, 0); + if (tpm_dev->io_lpcpd) + gpiod_set_value_cansleep(tpm_dev->io_lpcpd, 0); else ret = tpm_pm_suspend(dev); return ret; -} /* st33zp24_pm_suspend() */ +} EXPORT_SYMBOL(st33zp24_pm_suspend); -/* - * st33zp24_pm_resume resume the TPM device - * @param: tpm_data, the tpm phy. - * @return: 0 in case of success. - */ int st33zp24_pm_resume(struct device *dev) { struct tpm_chip *chip = dev_get_drvdata(dev); struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); int ret = 0; - if (gpio_is_valid(tpm_dev->io_lpcpd)) { - gpio_set_value(tpm_dev->io_lpcpd, 1); + if (tpm_dev->io_lpcpd) { + gpiod_set_value_cansleep(tpm_dev->io_lpcpd, 1); ret = wait_for_stat(chip, TPM_STS_VALID, chip->timeout_b, &tpm_dev->read_queue, false); @@ -640,11 +578,11 @@ int st33zp24_pm_resume(struct device *dev) tpm1_do_selftest(chip); } return ret; -} /* st33zp24_pm_resume() */ +} EXPORT_SYMBOL(st33zp24_pm_resume); #endif -MODULE_AUTHOR("TPM support (TPMsupport@list.st.com)"); +MODULE_AUTHOR("TPM support <TPMsupport@list.st.com>"); MODULE_DESCRIPTION("ST33ZP24 TPM 1.2 driver"); MODULE_VERSION("1.3.0"); MODULE_LICENSE("GPL"); |