diff options
Diffstat (limited to 'drivers/clk/Kconfig')
| -rw-r--r-- | drivers/clk/Kconfig | 213 |
1 files changed, 188 insertions, 25 deletions
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index e873f9ea2e65..3a1611008e48 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -23,7 +23,6 @@ menuconfig COMMON_CLK depends on !HAVE_LEGACY_CLK select HAVE_CLK_PREPARE select HAVE_CLK - select SRCU select RATIONAL help The common clock framework is a single definition of struct @@ -59,6 +58,14 @@ config LMK04832 Say yes here to build support for Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant Clock Jitter Cleaner With Dual Loop PLLs +config COMMON_CLK_APPLE_NCO + tristate "Clock driver for Apple SoC NCOs" + depends on ARCH_APPLE || COMPILE_TEST + help + This driver supports NCO (Numerically Controlled Oscillator) blocks + found on Apple SoCs such as t8103 (M1). The blocks are typically + generators of audio clocks. + config COMMON_CLK_MAX77686 tristate "Clock driver for Maxim 77620/77686/77802 MFD" depends on MFD_MAX77686 || MFD_MAX77620 || COMPILE_TEST @@ -74,16 +81,25 @@ config COMMON_CLK_MAX9485 config COMMON_CLK_RK808 tristate "Clock driver for RK805/RK808/RK809/RK817/RK818" - depends on MFD_RK808 + depends on MFD_RK8XX help This driver supports RK805, RK809 and RK817, RK808 and RK818 crystal oscillator clock. These multi-function devices have two fixed-rate oscillators, clocked at 32KHz each. Clkout1 is always on, Clkout2 can off by control register. +config COMMON_CLK_RP1 + tristate "Raspberry Pi RP1-based clock support" + depends on MISC_RP1 || COMPILE_TEST + default MISC_RP1 + help + Enable common clock framework support for Raspberry Pi RP1. + This multi-function device has 3 main PLLs and several clock + generators to drive the internal sub-peripherals. + config COMMON_CLK_HI655X tristate "Clock driver for Hi655x" if EXPERT depends on (MFD_HI655X_PMIC || COMPILE_TEST) - depends on REGMAP + select REGMAP default MFD_HI655X_PMIC help This driver supports the hi655x PMIC clock. This @@ -169,6 +185,14 @@ config COMMON_CLK_CDCE706 help This driver supports TI CDCE706 programmable 3-PLL clock synthesizer. +config COMMON_CLK_TPS68470 + tristate "Clock Driver for TI TPS68470 PMIC" + depends on I2C + depends on INTEL_SKL_INT3472 || COMPILE_TEST + select REGMAP_I2C + help + This driver supports the clocks provided by the TPS68470 PMIC. + config COMMON_CLK_CDCE925 tristate "Clock driver for TI CDCE913/925/937/949 devices" depends on I2C @@ -189,9 +213,38 @@ config COMMON_CLK_CDCE925 config COMMON_CLK_CS2000_CP tristate "Clock driver for CS2000 Fractional-N Clock Synthesizer & Clock Multiplier" depends on I2C + select REGMAP_I2C help If you say yes here you get support for the CS2000 clock multiplier. +config COMMON_CLK_EN7523 + bool "Clock driver for Airoha EN7523 SoC system clocks" + depends on OF + depends on ARCH_AIROHA || COMPILE_TEST + default ARCH_AIROHA + help + This driver provides the fixed clocks and gates present on Airoha + ARM silicon. + +config COMMON_CLK_EP93XX + tristate "Clock driver for Cirrus Logic ep93xx SoC" + depends on ARCH_EP93XX || COMPILE_TEST + select AUXILIARY_BUS + select REGMAP_MMIO + help + This driver supports the SoC clocks on the Cirrus Logic ep93xx. + +config COMMON_CLK_EYEQ + bool "Clock driver for the Mobileye EyeQ platform" + depends on MACH_EYEQ5 || MACH_EYEQ6H || COMPILE_TEST + select AUXILIARY_BUS + default MACH_EYEQ5 || MACH_EYEQ6H + help + This driver provides clocks found on Mobileye EyeQ5, EyeQ6L and Eye6H + SoCs. Controllers live in shared register regions called OLB. Driver + provides read-only PLLs, derived from the main crystal clock (which + must be constant). It also exposes some divider clocks. + config COMMON_CLK_FSL_FLEXSPI tristate "Clock driver for FlexSPI on Layerscape SoCs" depends on ARCH_LAYERSCAPE || COMPILE_TEST @@ -221,6 +274,16 @@ config COMMON_CLK_GEMINI This driver supports the SoC clocks on the Cortina Systems Gemini platform, also known as SL3516 or CS3516. +config COMMON_CLK_LAN966X + tristate "Generic Clock Controller driver for LAN966X SoC" + depends on HAS_IOMEM + depends on OF + depends on SOC_LAN966 || ARCH_LAN969X || COMPILE_TEST + help + This driver provides support for Generic Clock Controller(GCK) on + LAN966X SoC. GCK generates and supplies clock to various peripherals + within the SoC. + config COMMON_CLK_ASPEED bool "Clock driver for Aspeed BMC SoCs" depends on ARCH_ASPEED || COMPILE_TEST @@ -241,6 +304,15 @@ config COMMON_CLK_S2MPS11 clock. These multi-function devices have two (S2MPS14) or three (S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each. +config CLK_TWL + tristate "Clock driver for the TWL PMIC family" + depends on TWL4030_CORE + help + Enable support for controlling the clock resources on TWL family + PMICs. These devices have some 32K clock outputs which can be + controlled by software. For now, the TWL6032 and TWL6030 clocks are + supported. + config CLK_TWL6040 tristate "External McPDM functional clock from twl6040" depends on TWL6040_CORE @@ -289,6 +361,24 @@ config COMMON_CLK_LOCHNAGAR This driver supports the clocking features of the Cirrus Logic Lochnagar audio development board. +config COMMON_CLK_NPCM8XX + tristate "Clock driver for the NPCM8XX SoC Family" + depends on ARCH_NPCM || COMPILE_TEST + select AUXILIARY_BUS + help + This driver supports the clocks on the Nuvoton BMC NPCM8XX SoC Family, + all the clocks are initialized by the bootloader, so this driver + allows only reading of current settings directly from the hardware. + +config COMMON_CLK_LOONGSON2 + bool "Clock driver for Loongson-2 SoC" + depends on LOONGARCH || COMPILE_TEST + help + This driver provides support for clock controller on Loongson-2 SoC. + The clock controller can generates and supplies clock to various + peripherals within the SoC. + Say Y here to support Loongson-2 SoC clock driver. + config COMMON_CLK_NXP def_bool COMMON_CLK && (ARCH_LPC18XX || ARCH_LPC32XX) select REGMAP_MMIO if ARCH_LPC32XX @@ -315,15 +405,32 @@ config COMMON_CLK_PXA help Support for the Marvell PXA SoC. -config COMMON_CLK_PIC32 - def_bool COMMON_CLK && MACH_PIC32 +config COMMON_CLK_RS9_PCIE + tristate "Clock driver for Renesas 9-series PCIe clock generators" + depends on I2C + depends on OF + select REGMAP_I2C + help + This driver supports the Renesas 9-series PCIe clock generator + models 9FGV/9DBV/9DMV/9FGL/9DML/9QXL/9SQ. + +config COMMON_CLK_SI521XX + tristate "Clock driver for SkyWorks Si521xx PCIe clock generators" + depends on I2C + depends on OF + select REGMAP_I2C + help + This driver supports the SkyWorks Si521xx PCIe clock generator + models Si52144/Si52146/Si52147. -config COMMON_CLK_OXNAS - bool "Clock driver for the OXNAS SoC Family" - depends on ARCH_OXNAS || COMPILE_TEST - select MFD_SYSCON +config COMMON_CLK_VC3 + tristate "Clock driver for Renesas VersaClock 3 devices" + depends on I2C + depends on OF + select REGMAP_I2C help - Support for the OXNAS SoC Family clocks. + This driver supports the Renesas VersaClock 3 programmable clock + generators. config COMMON_CLK_VC5 tristate "Clock driver for IDT VersaClock 5,6 devices" @@ -334,20 +441,14 @@ config COMMON_CLK_VC5 This driver supports the IDT VersaClock 5 and VersaClock 6 programmable clock generators. -config COMMON_CLK_STM32MP157 - def_bool COMMON_CLK && MACH_STM32MP157 - help - Support for stm32mp157 SoC family clocks - -config COMMON_CLK_STM32MP157_SCMI - bool "stm32mp157 Clock driver with Trusted Firmware" - depends on COMMON_CLK_STM32MP157 - select COMMON_CLK_SCMI - select ARM_SCMI_PROTOCOL - default y +config COMMON_CLK_VC7 + tristate "Clock driver for Renesas Versaclock 7 devices" + depends on I2C + depends on OF + select REGMAP_I2C help - Support for stm32mp157 SoC family clocks with Trusted Firmware using - SCMI protocol. + Renesas Versaclock7 is a family of configurable clock generator + and jitter attenuator ICs with fractional and integer dividers. config COMMON_CLK_STM32F def_bool COMMON_CLK && (MACH_STM32F429 || MACH_STM32F469 || MACH_STM32F746) @@ -380,16 +481,36 @@ config COMMON_CLK_BD718XX config COMMON_CLK_FIXED_MMIO bool "Clock driver for Memory Mapped Fixed values" depends on COMMON_CLK && OF + depends on HAS_IOMEM help Support for Memory Mapped IO Fixed clocks config COMMON_CLK_K210 bool "Clock driver for the Canaan Kendryte K210 SoC" - depends on OF && RISCV && SOC_CANAAN - default SOC_CANAAN + depends on OF && RISCV && SOC_CANAAN_K210 + default SOC_CANAAN_K210 help Support for the Canaan Kendryte K210 RISC-V SoC clocks. +config COMMON_CLK_SP7021 + tristate "Clock driver for Sunplus SP7021 SoC" + depends on SOC_SP7021 || COMPILE_TEST + default SOC_SP7021 + help + This driver supports the Sunplus SP7021 SoC clocks. + It implements SP7021 PLLs/gate. + Not all features of the PLL are currently supported + by the driver. + +config COMMON_CLK_RPMI + tristate "Clock driver based on RISC-V RPMI" + depends on RISCV || COMPILE_TEST + depends on MAILBOX + default RISCV + help + Support for clocks based on the clock service group defined by + the RISC-V platform management interface (RPMI) specification. + source "drivers/clk/actions/Kconfig" source "drivers/clk/analogbits/Kconfig" source "drivers/clk/baikal-t1/Kconfig" @@ -400,9 +521,13 @@ source "drivers/clk/imx/Kconfig" source "drivers/clk/ingenic/Kconfig" source "drivers/clk/keystone/Kconfig" source "drivers/clk/mediatek/Kconfig" +source "drivers/clk/mmp/Kconfig" source "drivers/clk/meson/Kconfig" source "drivers/clk/mstar/Kconfig" +source "drivers/clk/microchip/Kconfig" source "drivers/clk/mvebu/Kconfig" +source "drivers/clk/nuvoton/Kconfig" +source "drivers/clk/pistachio/Kconfig" source "drivers/clk/qcom/Kconfig" source "drivers/clk/ralink/Kconfig" source "drivers/clk/renesas/Kconfig" @@ -410,14 +535,52 @@ source "drivers/clk/rockchip/Kconfig" source "drivers/clk/samsung/Kconfig" source "drivers/clk/sifive/Kconfig" source "drivers/clk/socfpga/Kconfig" +source "drivers/clk/sophgo/Kconfig" +source "drivers/clk/spacemit/Kconfig" source "drivers/clk/sprd/Kconfig" +source "drivers/clk/starfive/Kconfig" source "drivers/clk/sunxi/Kconfig" source "drivers/clk/sunxi-ng/Kconfig" source "drivers/clk/tegra/Kconfig" +source "drivers/clk/thead/Kconfig" +source "drivers/clk/stm32/Kconfig" source "drivers/clk/ti/Kconfig" source "drivers/clk/uniphier/Kconfig" +source "drivers/clk/visconti/Kconfig" source "drivers/clk/x86/Kconfig" source "drivers/clk/xilinx/Kconfig" source "drivers/clk/zynqmp/Kconfig" +# Kunit test cases +config CLK_KUNIT_TEST + tristate "Basic Clock Framework Kunit Tests" if !KUNIT_ALL_TESTS + depends on KUNIT + default KUNIT_ALL_TESTS + select DTC + help + Kunit tests for the common clock framework. + +config CLK_FIXED_RATE_KUNIT_TEST + tristate "Basic fixed rate clk type KUnit test" if !KUNIT_ALL_TESTS + depends on KUNIT + default KUNIT_ALL_TESTS + select DTC + help + KUnit tests for the basic fixed rate clk type. + +config CLK_GATE_KUNIT_TEST + tristate "Basic gate type Kunit test" if !KUNIT_ALL_TESTS + depends on KUNIT + depends on !S390 + default KUNIT_ALL_TESTS + help + Kunit test for the basic clk gate type. + +config CLK_FD_KUNIT_TEST + tristate "Basic fractional divider type Kunit test" if !KUNIT_ALL_TESTS + depends on KUNIT + default KUNIT_ALL_TESTS + help + Kunit test for the clk-fractional-divider type. + endif |