diff options
Diffstat (limited to 'drivers/clk/clk-ast2600.c')
| -rw-r--r-- | drivers/clk/clk-ast2600.c | 176 |
1 files changed, 140 insertions, 36 deletions
diff --git a/drivers/clk/clk-ast2600.c b/drivers/clk/clk-ast2600.c index 99afc949925f..114afc13d640 100644 --- a/drivers/clk/clk-ast2600.c +++ b/drivers/clk/clk-ast2600.c @@ -5,8 +5,8 @@ #define pr_fmt(fmt) "clk-ast2600: " fmt #include <linux/mfd/syscon.h> +#include <linux/mod_devicetable.h> #include <linux/of_address.h> -#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/slab.h> @@ -15,9 +15,14 @@ #include "clk-aspeed.h" -#define ASPEED_G6_NUM_CLKS 71 +/* + * This includes the gates (configured from aspeed_g6_gates), plus the + * explicitly-configured clocks (ASPEED_CLK_HPLL and up). + */ +#define ASPEED_G6_NUM_CLKS 73 -#define ASPEED_G6_SILICON_REV 0x004 +#define ASPEED_G6_SILICON_REV 0x014 +#define CHIP_REVISION_ID GENMASK(23, 16) #define ASPEED_G6_RESET_CTRL 0x040 #define ASPEED_G6_RESET_CTRL2 0x050 @@ -31,6 +36,20 @@ #define ASPEED_G6_CLK_SELECTION1 0x300 #define ASPEED_G6_CLK_SELECTION2 0x304 #define ASPEED_G6_CLK_SELECTION4 0x310 +#define ASPEED_G6_CLK_SELECTION5 0x314 +#define I3C_CLK_SELECTION_SHIFT 31 +#define I3C_CLK_SELECTION BIT(31) +#define I3C_CLK_SELECT_HCLK (0 << I3C_CLK_SELECTION_SHIFT) +#define I3C_CLK_SELECT_APLL_DIV (1 << I3C_CLK_SELECTION_SHIFT) +#define APLL_DIV_SELECTION_SHIFT 28 +#define APLL_DIV_SELECTION GENMASK(30, 28) +#define APLL_DIV_2 (0b001 << APLL_DIV_SELECTION_SHIFT) +#define APLL_DIV_3 (0b010 << APLL_DIV_SELECTION_SHIFT) +#define APLL_DIV_4 (0b011 << APLL_DIV_SELECTION_SHIFT) +#define APLL_DIV_5 (0b100 << APLL_DIV_SELECTION_SHIFT) +#define APLL_DIV_6 (0b101 << APLL_DIV_SELECTION_SHIFT) +#define APLL_DIV_7 (0b110 << APLL_DIV_SELECTION_SHIFT) +#define APLL_DIV_8 (0b111 << APLL_DIV_SELECTION_SHIFT) #define ASPEED_HPLL_PARAM 0x200 #define ASPEED_APLL_PARAM 0x210 @@ -50,8 +69,31 @@ static DEFINE_SPINLOCK(aspeed_g6_clk_lock); static struct clk_hw_onecell_data *aspeed_g6_clk_data; static void __iomem *scu_g6_base; +/* AST2600 revision: A0, A1, A2, etc */ +static u8 soc_rev; /* + * The majority of the clocks in the system are gates paired with a reset + * controller that holds the IP in reset; this is represented by the @reset_idx + * member of entries here. + * + * This borrows from clk_hw_register_gate, but registers two 'gates', one + * to control the clock enable register and the other to control the reset + * IP. This allows us to enforce the ordering: + * + * 1. Place IP in reset + * 2. Enable clock + * 3. Delay + * 4. Release reset + * + * Consequently, if reset_idx is set, reset control is implicit: the clock + * consumer does not need its own reset handling, as enabling the clock will + * also deassert reset. + * + * There are some gates that do not have an associated reset; these are + * handled by using -1 as the index for the reset, and the consumer must + * explicitly assert/deassert reset lines as required. + * * Clocks marked with CLK_IS_CRITICAL: * * ref0 and ref1 are essential for the SoC to operate @@ -60,10 +102,10 @@ static void __iomem *scu_g6_base; static const struct aspeed_gate_data aspeed_g6_gates[] = { /* clk rst name parent flags */ [ASPEED_CLK_GATE_MCLK] = { 0, -1, "mclk-gate", "mpll", CLK_IS_CRITICAL }, /* SDRAM */ - [ASPEED_CLK_GATE_ECLK] = { 1, -1, "eclk-gate", "eclk", 0 }, /* Video Engine */ + [ASPEED_CLK_GATE_ECLK] = { 1, 6, "eclk-gate", "eclk", 0 }, /* Video Engine */ [ASPEED_CLK_GATE_GCLK] = { 2, 7, "gclk-gate", NULL, 0 }, /* 2D engine */ /* vclk parent - dclk/d1clk/hclk/mclk */ - [ASPEED_CLK_GATE_VCLK] = { 3, 6, "vclk-gate", NULL, 0 }, /* Video Capture */ + [ASPEED_CLK_GATE_VCLK] = { 3, -1, "vclk-gate", NULL, 0 }, /* Video Capture */ [ASPEED_CLK_GATE_BCLK] = { 4, 8, "bclk-gate", "bclk", 0 }, /* PCIe/PCI */ /* From dpll */ [ASPEED_CLK_GATE_DCLK] = { 5, -1, "dclk-gate", NULL, CLK_IS_CRITICAL }, /* DAC */ @@ -94,14 +136,13 @@ static const struct aspeed_gate_data aspeed_g6_gates[] = { [ASPEED_CLK_GATE_LHCCLK] = { 37, -1, "lhclk-gate", "lhclk", 0 }, /* LPC master/LPC+ */ /* Reserved 38 RSA: no longer used */ /* Reserved 39 */ - [ASPEED_CLK_GATE_I3C0CLK] = { 40, 40, "i3c0clk-gate", NULL, 0 }, /* I3C0 */ - [ASPEED_CLK_GATE_I3C1CLK] = { 41, 41, "i3c1clk-gate", NULL, 0 }, /* I3C1 */ - [ASPEED_CLK_GATE_I3C2CLK] = { 42, 42, "i3c2clk-gate", NULL, 0 }, /* I3C2 */ - [ASPEED_CLK_GATE_I3C3CLK] = { 43, 43, "i3c3clk-gate", NULL, 0 }, /* I3C3 */ - [ASPEED_CLK_GATE_I3C4CLK] = { 44, 44, "i3c4clk-gate", NULL, 0 }, /* I3C4 */ - [ASPEED_CLK_GATE_I3C5CLK] = { 45, 45, "i3c5clk-gate", NULL, 0 }, /* I3C5 */ - [ASPEED_CLK_GATE_I3C6CLK] = { 46, 46, "i3c6clk-gate", NULL, 0 }, /* I3C6 */ - [ASPEED_CLK_GATE_I3C7CLK] = { 47, 47, "i3c7clk-gate", NULL, 0 }, /* I3C7 */ + [ASPEED_CLK_GATE_I3C0CLK] = { 40, 40, "i3c0clk-gate", "i3cclk", 0 }, /* I3C0 */ + [ASPEED_CLK_GATE_I3C1CLK] = { 41, 41, "i3c1clk-gate", "i3cclk", 0 }, /* I3C1 */ + [ASPEED_CLK_GATE_I3C2CLK] = { 42, 42, "i3c2clk-gate", "i3cclk", 0 }, /* I3C2 */ + [ASPEED_CLK_GATE_I3C3CLK] = { 43, 43, "i3c3clk-gate", "i3cclk", 0 }, /* I3C3 */ + [ASPEED_CLK_GATE_I3C4CLK] = { 44, 44, "i3c4clk-gate", "i3cclk", 0 }, /* I3C4 */ + [ASPEED_CLK_GATE_I3C5CLK] = { 45, 45, "i3c5clk-gate", "i3cclk", 0 }, /* I3C5 */ + /* Reserved: 46 & 47 */ [ASPEED_CLK_GATE_UART1CLK] = { 48, -1, "uart1clk-gate", "uart", 0 }, /* UART1 */ [ASPEED_CLK_GATE_UART2CLK] = { 49, -1, "uart2clk-gate", "uart", 0 }, /* UART2 */ [ASPEED_CLK_GATE_UART3CLK] = { 50, -1, "uart3clk-gate", "uart", 0 }, /* UART3 */ @@ -116,7 +157,7 @@ static const struct aspeed_gate_data aspeed_g6_gates[] = { [ASPEED_CLK_GATE_UART11CLK] = { 59, -1, "uart11clk-gate", "uartx", 0 }, /* UART11 */ [ASPEED_CLK_GATE_UART12CLK] = { 60, -1, "uart12clk-gate", "uartx", 0 }, /* UART12 */ [ASPEED_CLK_GATE_UART13CLK] = { 61, -1, "uart13clk-gate", "uartx", 0 }, /* UART13 */ - [ASPEED_CLK_GATE_FSICLK] = { 62, 59, "fsiclk-gate", NULL, 0 }, /* FSI */ + [ASPEED_CLK_GATE_FSICLK] = { 62, 59, "fsiclk-gate", "fsiclk", 0 }, /* FSI */ }; static const struct clk_div_table ast2600_eclk_div_table[] = { @@ -131,6 +172,18 @@ static const struct clk_div_table ast2600_eclk_div_table[] = { { 0 } }; +static const struct clk_div_table ast2600_emmc_extclk_div_table[] = { + { 0x0, 2 }, + { 0x1, 4 }, + { 0x2, 6 }, + { 0x3, 8 }, + { 0x4, 10 }, + { 0x5, 12 }, + { 0x6, 14 }, + { 0x7, 16 }, + { 0 } +}; + static const struct clk_div_table ast2600_mac_div_table[] = { { 0x0, 4 }, { 0x1, 4 }, @@ -179,17 +232,32 @@ static struct clk_hw *ast2600_calc_apll(const char *name, u32 val) { unsigned int mult, div; - if (val & BIT(20)) { - /* Pass through mode */ - mult = div = 1; + if (soc_rev >= 2) { + if (val & BIT(24)) { + /* Pass through mode */ + mult = div = 1; + } else { + /* F = 25Mhz * [(m + 1) / (n + 1)] / (p + 1) */ + u32 m = val & 0x1fff; + u32 n = (val >> 13) & 0x3f; + u32 p = (val >> 19) & 0xf; + + mult = (m + 1); + div = (n + 1) * (p + 1); + } } else { - /* F = 25Mhz * (2-od) * [(m + 2) / (n + 1)] */ - u32 m = (val >> 5) & 0x3f; - u32 od = (val >> 4) & 0x1; - u32 n = val & 0xf; + if (val & BIT(20)) { + /* Pass through mode */ + mult = div = 1; + } else { + /* F = 25Mhz * (2-od) * [(m + 2) / (n + 1)] */ + u32 m = (val >> 5) & 0x3f; + u32 od = (val >> 4) & 0x1; + u32 n = val & 0xf; - mult = (2 - od) * (m + 2); - div = n + 1; + mult = (2 - od) * (m + 2); + div = n + 1; + } } return clk_hw_register_fixed_factor(NULL, name, "clkin", 0, mult, div); @@ -390,6 +458,11 @@ static struct clk_hw *aspeed_g6_clk_hw_register_gate(struct device *dev, return hw; } +static const char *const emmc_extclk_parent_names[] = { + "emmc_extclk_hpll_in", + "mpll", +}; + static const char * const vclk_parent_names[] = { "dpll", "d1pll", @@ -459,16 +532,32 @@ static int aspeed_g6_clk_probe(struct platform_device *pdev) return PTR_ERR(hw); aspeed_g6_clk_data->hws[ASPEED_CLK_UARTX] = hw; - /* EMMC ext clock divider */ - hw = clk_hw_register_gate(dev, "emmc_extclk_gate", "hpll", 0, - scu_g6_base + ASPEED_G6_CLK_SELECTION1, 15, 0, - &aspeed_g6_clk_lock); + /* EMMC ext clock */ + hw = clk_hw_register_fixed_factor(dev, "emmc_extclk_hpll_in", "hpll", + 0, 1, 2); if (IS_ERR(hw)) return PTR_ERR(hw); - hw = clk_hw_register_divider_table(dev, "emmc_extclk", "emmc_extclk_gate", 0, - scu_g6_base + ASPEED_G6_CLK_SELECTION1, 12, 3, 0, - ast2600_div_table, - &aspeed_g6_clk_lock); + + hw = clk_hw_register_mux(dev, "emmc_extclk_mux", + emmc_extclk_parent_names, + ARRAY_SIZE(emmc_extclk_parent_names), 0, + scu_g6_base + ASPEED_G6_CLK_SELECTION1, 11, 1, + 0, &aspeed_g6_clk_lock); + if (IS_ERR(hw)) + return PTR_ERR(hw); + + hw = clk_hw_register_gate(dev, "emmc_extclk_gate", "emmc_extclk_mux", + 0, scu_g6_base + ASPEED_G6_CLK_SELECTION1, + 15, 0, &aspeed_g6_clk_lock); + if (IS_ERR(hw)) + return PTR_ERR(hw); + + hw = clk_hw_register_divider_table(dev, "emmc_extclk", + "emmc_extclk_gate", 0, + scu_g6_base + + ASPEED_G6_CLK_SELECTION1, 12, + 3, 0, ast2600_emmc_extclk_div_table, + &aspeed_g6_clk_lock); if (IS_ERR(hw)) return PTR_ERR(hw); aspeed_g6_clk_data->hws[ASPEED_CLK_EMMC] = hw; @@ -571,7 +660,7 @@ static int aspeed_g6_clk_probe(struct platform_device *pdev) regmap_write(map, 0x308, 0x12000); /* 3x3 = 9 */ /* P-Bus (BCLK) clock divider */ - hw = clk_hw_register_divider_table(dev, "bclk", "hpll", 0, + hw = clk_hw_register_divider_table(dev, "bclk", "epll", 0, scu_g6_base + ASPEED_G6_CLK_SELECTION1, 20, 3, 0, ast2600_div_table, &aspeed_g6_clk_lock); @@ -601,6 +690,9 @@ static int aspeed_g6_clk_probe(struct platform_device *pdev) const struct aspeed_gate_data *gd = &aspeed_g6_gates[i]; u32 gate_flags; + if (!gd->name) + continue; + /* * Special case: the USB port 1 clock (bit 14) is always * working the opposite way from the other ones. @@ -657,7 +749,7 @@ static const u32 ast2600_a1_axi_ahb200_tbl[] = { static void __init aspeed_g6_cc(struct regmap *map) { struct clk_hw *hw; - u32 val, div, divbits, chip_id, axi_div, ahb_div; + u32 val, div, divbits, axi_div, ahb_div; clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, 25000000); @@ -688,8 +780,7 @@ static void __init aspeed_g6_cc(struct regmap *map) axi_div = 2; divbits = (val >> 11) & 0x3; - regmap_read(map, ASPEED_G6_SILICON_REV, &chip_id); - if (chip_id & BIT(16)) { + if (soc_rev >= 1) { if (!divbits) { ahb_div = ast2600_a1_axi_ahb200_tbl[(val >> 8) & 0x3]; if (val & BIT(16)) @@ -722,6 +813,17 @@ static void __init aspeed_g6_cc(struct regmap *map) /* USB 2.0 port1 phy 40MHz clock */ hw = clk_hw_register_fixed_rate(NULL, "usb-phy-40m", NULL, 0, 40000000); aspeed_g6_clk_data->hws[ASPEED_CLK_USBPHY_40M] = hw; + + /* i3c clock: source from apll, divide by 8 */ + regmap_update_bits(map, ASPEED_G6_CLK_SELECTION5, + I3C_CLK_SELECTION | APLL_DIV_SELECTION, + I3C_CLK_SELECT_APLL_DIV | APLL_DIV_8); + + hw = clk_hw_register_fixed_factor(NULL, "i3cclk", "apll", 0, 1, 8); + aspeed_g6_clk_data->hws[ASPEED_CLK_I3C] = hw; + + hw = clk_hw_register_fixed_factor(NULL, "fsiclk", "apll", 0, 1, 4); + aspeed_g6_clk_data->hws[ASPEED_CLK_FSI] = hw; }; static void __init aspeed_g6_cc_init(struct device_node *np) @@ -734,10 +836,13 @@ static void __init aspeed_g6_cc_init(struct device_node *np) if (!scu_g6_base) return; + soc_rev = (readl(scu_g6_base + ASPEED_G6_SILICON_REV) & CHIP_REVISION_ID) >> 16; + aspeed_g6_clk_data = kzalloc(struct_size(aspeed_g6_clk_data, hws, ASPEED_G6_NUM_CLKS), GFP_KERNEL); if (!aspeed_g6_clk_data) return; + aspeed_g6_clk_data->num = ASPEED_G6_NUM_CLKS; /* * This way all clocks fetched before the platform device probes, @@ -759,7 +864,6 @@ static void __init aspeed_g6_cc_init(struct device_node *np) } aspeed_g6_cc(map); - aspeed_g6_clk_data->num = ASPEED_G6_NUM_CLKS; ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, aspeed_g6_clk_data); if (ret) pr_err("failed to add DT provider: %d\n", ret); |