diff options
Diffstat (limited to 'drivers/clk/clk-ast2600.c')
| -rw-r--r-- | drivers/clk/clk-ast2600.c | 76 |
1 files changed, 64 insertions, 12 deletions
diff --git a/drivers/clk/clk-ast2600.c b/drivers/clk/clk-ast2600.c index 9c3305bcb27a..114afc13d640 100644 --- a/drivers/clk/clk-ast2600.c +++ b/drivers/clk/clk-ast2600.c @@ -5,8 +5,8 @@ #define pr_fmt(fmt) "clk-ast2600: " fmt #include <linux/mfd/syscon.h> +#include <linux/mod_devicetable.h> #include <linux/of_address.h> -#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/slab.h> @@ -15,7 +15,11 @@ #include "clk-aspeed.h" -#define ASPEED_G6_NUM_CLKS 71 +/* + * This includes the gates (configured from aspeed_g6_gates), plus the + * explicitly-configured clocks (ASPEED_CLK_HPLL and up). + */ +#define ASPEED_G6_NUM_CLKS 73 #define ASPEED_G6_SILICON_REV 0x014 #define CHIP_REVISION_ID GENMASK(23, 16) @@ -32,6 +36,20 @@ #define ASPEED_G6_CLK_SELECTION1 0x300 #define ASPEED_G6_CLK_SELECTION2 0x304 #define ASPEED_G6_CLK_SELECTION4 0x310 +#define ASPEED_G6_CLK_SELECTION5 0x314 +#define I3C_CLK_SELECTION_SHIFT 31 +#define I3C_CLK_SELECTION BIT(31) +#define I3C_CLK_SELECT_HCLK (0 << I3C_CLK_SELECTION_SHIFT) +#define I3C_CLK_SELECT_APLL_DIV (1 << I3C_CLK_SELECTION_SHIFT) +#define APLL_DIV_SELECTION_SHIFT 28 +#define APLL_DIV_SELECTION GENMASK(30, 28) +#define APLL_DIV_2 (0b001 << APLL_DIV_SELECTION_SHIFT) +#define APLL_DIV_3 (0b010 << APLL_DIV_SELECTION_SHIFT) +#define APLL_DIV_4 (0b011 << APLL_DIV_SELECTION_SHIFT) +#define APLL_DIV_5 (0b100 << APLL_DIV_SELECTION_SHIFT) +#define APLL_DIV_6 (0b101 << APLL_DIV_SELECTION_SHIFT) +#define APLL_DIV_7 (0b110 << APLL_DIV_SELECTION_SHIFT) +#define APLL_DIV_8 (0b111 << APLL_DIV_SELECTION_SHIFT) #define ASPEED_HPLL_PARAM 0x200 #define ASPEED_APLL_PARAM 0x210 @@ -55,6 +73,27 @@ static void __iomem *scu_g6_base; static u8 soc_rev; /* + * The majority of the clocks in the system are gates paired with a reset + * controller that holds the IP in reset; this is represented by the @reset_idx + * member of entries here. + * + * This borrows from clk_hw_register_gate, but registers two 'gates', one + * to control the clock enable register and the other to control the reset + * IP. This allows us to enforce the ordering: + * + * 1. Place IP in reset + * 2. Enable clock + * 3. Delay + * 4. Release reset + * + * Consequently, if reset_idx is set, reset control is implicit: the clock + * consumer does not need its own reset handling, as enabling the clock will + * also deassert reset. + * + * There are some gates that do not have an associated reset; these are + * handled by using -1 as the index for the reset, and the consumer must + * explicitly assert/deassert reset lines as required. + * * Clocks marked with CLK_IS_CRITICAL: * * ref0 and ref1 are essential for the SoC to operate @@ -97,14 +136,13 @@ static const struct aspeed_gate_data aspeed_g6_gates[] = { [ASPEED_CLK_GATE_LHCCLK] = { 37, -1, "lhclk-gate", "lhclk", 0 }, /* LPC master/LPC+ */ /* Reserved 38 RSA: no longer used */ /* Reserved 39 */ - [ASPEED_CLK_GATE_I3C0CLK] = { 40, 40, "i3c0clk-gate", NULL, 0 }, /* I3C0 */ - [ASPEED_CLK_GATE_I3C1CLK] = { 41, 41, "i3c1clk-gate", NULL, 0 }, /* I3C1 */ - [ASPEED_CLK_GATE_I3C2CLK] = { 42, 42, "i3c2clk-gate", NULL, 0 }, /* I3C2 */ - [ASPEED_CLK_GATE_I3C3CLK] = { 43, 43, "i3c3clk-gate", NULL, 0 }, /* I3C3 */ - [ASPEED_CLK_GATE_I3C4CLK] = { 44, 44, "i3c4clk-gate", NULL, 0 }, /* I3C4 */ - [ASPEED_CLK_GATE_I3C5CLK] = { 45, 45, "i3c5clk-gate", NULL, 0 }, /* I3C5 */ - [ASPEED_CLK_GATE_I3C6CLK] = { 46, 46, "i3c6clk-gate", NULL, 0 }, /* I3C6 */ - [ASPEED_CLK_GATE_I3C7CLK] = { 47, 47, "i3c7clk-gate", NULL, 0 }, /* I3C7 */ + [ASPEED_CLK_GATE_I3C0CLK] = { 40, 40, "i3c0clk-gate", "i3cclk", 0 }, /* I3C0 */ + [ASPEED_CLK_GATE_I3C1CLK] = { 41, 41, "i3c1clk-gate", "i3cclk", 0 }, /* I3C1 */ + [ASPEED_CLK_GATE_I3C2CLK] = { 42, 42, "i3c2clk-gate", "i3cclk", 0 }, /* I3C2 */ + [ASPEED_CLK_GATE_I3C3CLK] = { 43, 43, "i3c3clk-gate", "i3cclk", 0 }, /* I3C3 */ + [ASPEED_CLK_GATE_I3C4CLK] = { 44, 44, "i3c4clk-gate", "i3cclk", 0 }, /* I3C4 */ + [ASPEED_CLK_GATE_I3C5CLK] = { 45, 45, "i3c5clk-gate", "i3cclk", 0 }, /* I3C5 */ + /* Reserved: 46 & 47 */ [ASPEED_CLK_GATE_UART1CLK] = { 48, -1, "uart1clk-gate", "uart", 0 }, /* UART1 */ [ASPEED_CLK_GATE_UART2CLK] = { 49, -1, "uart2clk-gate", "uart", 0 }, /* UART2 */ [ASPEED_CLK_GATE_UART3CLK] = { 50, -1, "uart3clk-gate", "uart", 0 }, /* UART3 */ @@ -119,7 +157,7 @@ static const struct aspeed_gate_data aspeed_g6_gates[] = { [ASPEED_CLK_GATE_UART11CLK] = { 59, -1, "uart11clk-gate", "uartx", 0 }, /* UART11 */ [ASPEED_CLK_GATE_UART12CLK] = { 60, -1, "uart12clk-gate", "uartx", 0 }, /* UART12 */ [ASPEED_CLK_GATE_UART13CLK] = { 61, -1, "uart13clk-gate", "uartx", 0 }, /* UART13 */ - [ASPEED_CLK_GATE_FSICLK] = { 62, 59, "fsiclk-gate", NULL, 0 }, /* FSI */ + [ASPEED_CLK_GATE_FSICLK] = { 62, 59, "fsiclk-gate", "fsiclk", 0 }, /* FSI */ }; static const struct clk_div_table ast2600_eclk_div_table[] = { @@ -652,6 +690,9 @@ static int aspeed_g6_clk_probe(struct platform_device *pdev) const struct aspeed_gate_data *gd = &aspeed_g6_gates[i]; u32 gate_flags; + if (!gd->name) + continue; + /* * Special case: the USB port 1 clock (bit 14) is always * working the opposite way from the other ones. @@ -772,6 +813,17 @@ static void __init aspeed_g6_cc(struct regmap *map) /* USB 2.0 port1 phy 40MHz clock */ hw = clk_hw_register_fixed_rate(NULL, "usb-phy-40m", NULL, 0, 40000000); aspeed_g6_clk_data->hws[ASPEED_CLK_USBPHY_40M] = hw; + + /* i3c clock: source from apll, divide by 8 */ + regmap_update_bits(map, ASPEED_G6_CLK_SELECTION5, + I3C_CLK_SELECTION | APLL_DIV_SELECTION, + I3C_CLK_SELECT_APLL_DIV | APLL_DIV_8); + + hw = clk_hw_register_fixed_factor(NULL, "i3cclk", "apll", 0, 1, 8); + aspeed_g6_clk_data->hws[ASPEED_CLK_I3C] = hw; + + hw = clk_hw_register_fixed_factor(NULL, "fsiclk", "apll", 0, 1, 4); + aspeed_g6_clk_data->hws[ASPEED_CLK_FSI] = hw; }; static void __init aspeed_g6_cc_init(struct device_node *np) @@ -790,6 +842,7 @@ static void __init aspeed_g6_cc_init(struct device_node *np) ASPEED_G6_NUM_CLKS), GFP_KERNEL); if (!aspeed_g6_clk_data) return; + aspeed_g6_clk_data->num = ASPEED_G6_NUM_CLKS; /* * This way all clocks fetched before the platform device probes, @@ -811,7 +864,6 @@ static void __init aspeed_g6_cc_init(struct device_node *np) } aspeed_g6_cc(map); - aspeed_g6_clk_data->num = ASPEED_G6_NUM_CLKS; ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, aspeed_g6_clk_data); if (ret) pr_err("failed to add DT provider: %d\n", ret); |