1 files changed, 278 insertions, 0 deletions
diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
new file mode 100644
index 000000000000..c7dfb3a06cb5
--- /dev/null
+++ b/drivers/clk/meson/gxbb-aoclk.c
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+#include <linux/platform_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include "meson-aoclk.h"
+
+#include "clk-regmap.h"
+#include "clk-dualdiv.h"
+
+#include <dt-bindings/clock/gxbb-aoclkc.h>
+#include <dt-bindings/reset/gxbb-aoclkc.h>
+
+/* AO Configuration Clock registers offsets */
+#define AO_RTI_PWR_CNTL_REG1	0x0c
+#define AO_RTI_PWR_CNTL_REG0	0x10
+#define AO_RTI_GEN_CNTL_REG0	0x40
+#define AO_OSCIN_CNTL		0x58
+#define AO_CRT_CLK_CNTL1	0x68
+#define AO_RTC_ALT_CLK_CNTL0	0x94
+#define AO_RTC_ALT_CLK_CNTL1	0x98
+
+static const struct clk_parent_data gxbb_ao_pclk_parents = { .fw_name = "mpeg-clk" };
+
+#define GXBB_AO_PCLK(_name, _bit, _flags)			\
+	MESON_PCLK(gxbb_ao_##_name, AO_RTI_GEN_CNTL_REG0, _bit, \
+		   &gxbb_ao_pclk_parents, _flags)
+
+static GXBB_AO_PCLK(remote,	0, CLK_IGNORE_UNUSED);
+static GXBB_AO_PCLK(i2c_master,	1, CLK_IGNORE_UNUSED);
+static GXBB_AO_PCLK(i2c_slave,	2, CLK_IGNORE_UNUSED);
+static GXBB_AO_PCLK(uart1,	3, CLK_IGNORE_UNUSED);
+static GXBB_AO_PCLK(uart2,	5, CLK_IGNORE_UNUSED);
+static GXBB_AO_PCLK(ir_blaster,	6, CLK_IGNORE_UNUSED);
+
+static struct clk_regmap gxbb_ao_cts_oscin = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = AO_RTI_PWR_CNTL_REG0,
+		.bit_idx = 6,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ao_cts_oscin",
+		.ops = &clk_regmap_gate_ro_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap gxbb_ao_32k_pre = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = AO_RTC_ALT_CLK_CNTL0,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ao_32k_pre",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) { &gxbb_ao_cts_oscin.hw },
+		.num_parents = 1,
+	},
+};
+
+static const struct meson_clk_dualdiv_param gxbb_32k_div_table[] = {
+	{
+		.dual	= 1,
+		.n1	= 733,
+		.m1	= 8,
+		.n2	= 732,
+		.m2	= 11,
+	}, {}
+};
+
+static struct clk_regmap gxbb_ao_32k_div = {
+	.data = &(struct meson_clk_dualdiv_data){
+		.n1 = {
+			.reg_off = AO_RTC_ALT_CLK_CNTL0,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.n2 = {
+			.reg_off = AO_RTC_ALT_CLK_CNTL0,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.m1 = {
+			.reg_off = AO_RTC_ALT_CLK_CNTL1,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.m2 = {
+			.reg_off = AO_RTC_ALT_CLK_CNTL1,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.dual = {
+			.reg_off = AO_RTC_ALT_CLK_CNTL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.table = gxbb_32k_div_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ao_32k_div",
+		.ops = &meson_clk_dualdiv_ops,
+		.parent_hws = (const struct clk_hw *[]) { &gxbb_ao_32k_pre.hw },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap gxbb_ao_32k_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = AO_RTC_ALT_CLK_CNTL1,
+		.mask = 0x1,
+		.shift = 24,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ao_32k_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&gxbb_ao_32k_div.hw,
+			&gxbb_ao_32k_pre.hw
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap gxbb_ao_32k = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = AO_RTC_ALT_CLK_CNTL0,
+		.bit_idx = 30,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ao_32k",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) { &gxbb_ao_32k_sel.hw },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap gxbb_ao_cts_rtc_oscin = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = AO_RTI_PWR_CNTL_REG0,
+		.mask = 0x7,
+		.shift = 10,
+		.table = (u32[]){ 1, 2, 3, 4 },
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ao_cts_rtc_oscin",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .fw_name = "ext-32k-0", },
+			{ .fw_name = "ext-32k-1", },
+			{ .fw_name = "ext-32k-2", },
+			{ .hw = &gxbb_ao_32k.hw },
+		},
+		.num_parents = 4,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap gxbb_ao_clk81 = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = AO_RTI_PWR_CNTL_REG0,
+		.mask = 0x1,
+		.shift = 0,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ao_clk81",
+		.ops = &clk_regmap_mux_ro_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .fw_name = "mpeg-clk", },
+			{ .hw = &gxbb_ao_cts_rtc_oscin.hw },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap gxbb_ao_cts_cec = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = AO_CRT_CLK_CNTL1,
+		.mask = 0x1,
+		.shift = 27,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ao_cts_cec",
+		.ops = &clk_regmap_mux_ops,
+		/*
+		 * FIXME: The 'fixme' parent obviously does not exist.
+		 *
+		 * ATM, CCF won't call get_parent() if num_parents is 1. It
+		 * does not allow NULL as a parent name either.
+		 *
+		 * On this particular mux, we only know the input #1 parent
+		 * but, on boot, unknown input #0 is set, so it is critical
+		 * to call .get_parent() on it
+		 *
+		 * Until CCF gets fixed, adding this fake parent that won't
+		 * ever be registered should work around the problem
+		 */
+		.parent_data = (const struct clk_parent_data []) {
+			{ .name = "fixme", .index = -1, },
+			{ .hw = &gxbb_ao_cts_rtc_oscin.hw },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const unsigned int gxbb_ao_reset[] = {
+	[RESET_AO_REMOTE] = 16,
+	[RESET_AO_I2C_MASTER] = 18,
+	[RESET_AO_I2C_SLAVE] = 19,
+	[RESET_AO_UART1] = 17,
+	[RESET_AO_UART2] = 22,
+	[RESET_AO_IR_BLASTER] = 23,
+};
+
+static struct clk_hw *gxbb_ao_hw_clks[] = {
+		[CLKID_AO_REMOTE]	= &gxbb_ao_remote.hw,
+		[CLKID_AO_I2C_MASTER]	= &gxbb_ao_i2c_master.hw,
+		[CLKID_AO_I2C_SLAVE]	= &gxbb_ao_i2c_slave.hw,
+		[CLKID_AO_UART1]	= &gxbb_ao_uart1.hw,
+		[CLKID_AO_UART2]	= &gxbb_ao_uart2.hw,
+		[CLKID_AO_IR_BLASTER]	= &gxbb_ao_ir_blaster.hw,
+		[CLKID_AO_CEC_32K]	= &gxbb_ao_cts_cec.hw,
+		[CLKID_AO_CTS_OSCIN]	= &gxbb_ao_cts_oscin.hw,
+		[CLKID_AO_32K_PRE]	= &gxbb_ao_32k_pre.hw,
+		[CLKID_AO_32K_DIV]	= &gxbb_ao_32k_div.hw,
+		[CLKID_AO_32K_SEL]	= &gxbb_ao_32k_sel.hw,
+		[CLKID_AO_32K]		= &gxbb_ao_32k.hw,
+		[CLKID_AO_CTS_RTC_OSCIN] = &gxbb_ao_cts_rtc_oscin.hw,
+		[CLKID_AO_CLK81]	= &gxbb_ao_clk81.hw,
+};
+
+static const struct meson_aoclk_data gxbb_ao_clkc_data = {
+	.reset_reg	= AO_RTI_GEN_CNTL_REG0,
+	.num_reset	= ARRAY_SIZE(gxbb_ao_reset),
+	.reset		= gxbb_ao_reset,
+	.clkc_data	= {
+		.hw_clks = {
+			.hws	= gxbb_ao_hw_clks,
+			.num	= ARRAY_SIZE(gxbb_ao_hw_clks),
+		},
+	},
+};
+
+static const struct of_device_id gxbb_ao_clkc_match_table[] = {
+	{
+		.compatible	= "amlogic,meson-gx-aoclkc",
+		.data		= &gxbb_ao_clkc_data.clkc_data,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, gxbb_ao_clkc_match_table);
+
+static struct platform_driver gxbb_ao_clkc_driver = {
+	.probe		= meson_aoclkc_probe,
+	.driver		= {
+		.name	= "gxbb-aoclkc",
+		.of_match_table = gxbb_ao_clkc_match_table,
+	},
+};
+module_platform_driver(gxbb_ao_clkc_driver);
+
+MODULE_DESCRIPTION("Amlogic GXBB Always-ON Clock Controller driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS("CLK_MESON");