diff options
Diffstat (limited to 'drivers/clk/zynq/pll.c')
| -rw-r--r-- | drivers/clk/zynq/pll.c | 68 |
1 files changed, 29 insertions, 39 deletions
diff --git a/drivers/clk/zynq/pll.c b/drivers/clk/zynq/pll.c index 00d72fb5c036..5eca1c14981a 100644 --- a/drivers/clk/zynq/pll.c +++ b/drivers/clk/zynq/pll.c @@ -1,22 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Zynq PLL driver * * Copyright (C) 2013 Xilinx * * Sören Brinkmann <soren.brinkmann@xilinx.com> - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License v2 as published by - * the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * */ #include <linux/clk/zynq.h> #include <linux/clk-provider.h> @@ -24,7 +12,7 @@ #include <linux/io.h> /** - * struct zynq_pll + * struct zynq_pll - pll clock * @hw: Handle between common and hardware-specific interfaces * @pll_ctrl: PLL control register * @pll_status: PLL status register @@ -58,27 +46,29 @@ struct zynq_pll { * @hw: Handle between common and hardware-specific interfaces * @rate: Desired clock frequency * @prate: Clock frequency of parent clock - * Returns frequency closest to @rate the hardware can generate. + * Return: frequency closest to @rate the hardware can generate. */ -static long zynq_pll_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) +static int zynq_pll_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) { u32 fbdiv; - fbdiv = DIV_ROUND_CLOSEST(rate, *prate); + fbdiv = DIV_ROUND_CLOSEST(req->rate, req->best_parent_rate); if (fbdiv < PLL_FBDIV_MIN) fbdiv = PLL_FBDIV_MIN; else if (fbdiv > PLL_FBDIV_MAX) fbdiv = PLL_FBDIV_MAX; - return *prate * fbdiv; + req->rate = req->best_parent_rate * fbdiv; + + return 0; } /** * zynq_pll_recalc_rate() - Recalculate clock frequency * @hw: Handle between common and hardware-specific interfaces * @parent_rate: Clock frequency of parent clock - * Returns current clock frequency. + * Return: current clock frequency. */ static unsigned long zynq_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) @@ -90,7 +80,7 @@ static unsigned long zynq_pll_recalc_rate(struct clk_hw *hw, * makes probably sense to redundantly save fbdiv in the struct * zynq_pll to save the IO access. */ - fbdiv = (clk_readl(clk->pll_ctrl) & PLLCTRL_FBDIV_MASK) >> + fbdiv = (readl(clk->pll_ctrl) & PLLCTRL_FBDIV_MASK) >> PLLCTRL_FBDIV_SHIFT; return parent_rate * fbdiv; @@ -99,7 +89,7 @@ static unsigned long zynq_pll_recalc_rate(struct clk_hw *hw, /** * zynq_pll_is_enabled - Check if a clock is enabled * @hw: Handle between common and hardware-specific interfaces - * Returns 1 if the clock is enabled, 0 otherwise. + * Return: 1 if the clock is enabled, 0 otherwise. * * Not sure this is a good idea, but since disabled means bypassed for * this clock implementation we say we are always enabled. @@ -112,7 +102,7 @@ static int zynq_pll_is_enabled(struct clk_hw *hw) spin_lock_irqsave(clk->lock, flags); - reg = clk_readl(clk->pll_ctrl); + reg = readl(clk->pll_ctrl); spin_unlock_irqrestore(clk->lock, flags); @@ -122,7 +112,7 @@ static int zynq_pll_is_enabled(struct clk_hw *hw) /** * zynq_pll_enable - Enable clock * @hw: Handle between common and hardware-specific interfaces - * Returns 0 on success + * Return: 0 on success */ static int zynq_pll_enable(struct clk_hw *hw) { @@ -138,10 +128,10 @@ static int zynq_pll_enable(struct clk_hw *hw) /* Power up PLL and wait for lock */ spin_lock_irqsave(clk->lock, flags); - reg = clk_readl(clk->pll_ctrl); + reg = readl(clk->pll_ctrl); reg &= ~(PLLCTRL_RESET_MASK | PLLCTRL_PWRDWN_MASK); - clk_writel(reg, clk->pll_ctrl); - while (!(clk_readl(clk->pll_status) & (1 << clk->lockbit))) + writel(reg, clk->pll_ctrl); + while (!(readl(clk->pll_status) & (1 << clk->lockbit))) ; spin_unlock_irqrestore(clk->lock, flags); @@ -168,9 +158,9 @@ static void zynq_pll_disable(struct clk_hw *hw) /* shut down PLL */ spin_lock_irqsave(clk->lock, flags); - reg = clk_readl(clk->pll_ctrl); + reg = readl(clk->pll_ctrl); reg |= PLLCTRL_RESET_MASK | PLLCTRL_PWRDWN_MASK; - clk_writel(reg, clk->pll_ctrl); + writel(reg, clk->pll_ctrl); spin_unlock_irqrestore(clk->lock, flags); } @@ -179,19 +169,19 @@ static const struct clk_ops zynq_pll_ops = { .enable = zynq_pll_enable, .disable = zynq_pll_disable, .is_enabled = zynq_pll_is_enabled, - .round_rate = zynq_pll_round_rate, + .determine_rate = zynq_pll_determine_rate, .recalc_rate = zynq_pll_recalc_rate }; /** * clk_register_zynq_pll() - Register PLL with the clock framework - * @name PLL name - * @parent Parent clock name - * @pll_ctrl Pointer to PLL control register - * @pll_status Pointer to PLL status register - * @lock_index Bit index to this PLL's lock status bit in @pll_status - * @lock Register lock - * Returns handle to the registered clock. + * @name: PLL name + * @parent: Parent clock name + * @pll_ctrl: Pointer to PLL control register + * @pll_status: Pointer to PLL status register + * @lock_index: Bit index to this PLL's lock status bit in @pll_status + * @lock: Register lock + * Return: handle to the registered clock. */ struct clk *clk_register_zynq_pll(const char *name, const char *parent, void __iomem *pll_ctrl, void __iomem *pll_status, u8 lock_index, @@ -223,9 +213,9 @@ struct clk *clk_register_zynq_pll(const char *name, const char *parent, spin_lock_irqsave(pll->lock, flags); - reg = clk_readl(pll->pll_ctrl); + reg = readl(pll->pll_ctrl); reg &= ~PLLCTRL_BPQUAL_MASK; - clk_writel(reg, pll->pll_ctrl); + writel(reg, pll->pll_ctrl); spin_unlock_irqrestore(pll->lock, flags); |